[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH V4 07/10] Introduce Xen PCI Passthrough, qdevice (1/3)



From: Allen Kay <allen.m.kay@xxxxxxxxx>

A more complete history can be found here:
git://xenbits.xensource.com/qemu-xen-unstable.git

Signed-off-by: Allen Kay <allen.m.kay@xxxxxxxxx>
Signed-off-by: Guy Zana <guy@xxxxxxxxxxxx>
Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>
---
 Makefile.target                      |    2 +
 hw/xen_common.h                      |    3 +
 hw/xen_pci_passthrough.c             |  831 ++++++++++++++++++++++++++++++++++
 hw/xen_pci_passthrough.h             |  282 ++++++++++++
 hw/xen_pci_passthrough_config_init.c |   11 +
 xen-all.c                            |   12 +
 6 files changed, 1141 insertions(+), 0 deletions(-)
 create mode 100644 hw/xen_pci_passthrough.c
 create mode 100644 hw/xen_pci_passthrough.h
 create mode 100644 hw/xen_pci_passthrough_config_init.c

diff --git a/Makefile.target b/Makefile.target
index e527c1b..33435a3 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -221,6 +221,8 @@ obj-i386-$(CONFIG_XEN) += xen_platform.o
 
 # Xen PCI Passthrough
 obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += host-pci-device.o
+obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough.o
+obj-i386-$(CONFIG_XEN_PCI_PASSTHROUGH) += xen_pci_passthrough_config_init.o
 
 # Inter-VM PCI shared memory
 CONFIG_IVSHMEM =
diff --git a/hw/xen_common.h b/hw/xen_common.h
index 0409ac7..48916fd 100644
--- a/hw/xen_common.h
+++ b/hw/xen_common.h
@@ -135,4 +135,7 @@ static inline int xc_fd(xc_interface *xen_xc)
 
 void destroy_hvm_domain(void);
 
+/* shutdown/destroy current domain because of an error */
+void xen_shutdown_fatal_error(const char *fmt, ...) GCC_FMT_ATTR(1, 2);
+
 #endif /* QEMU_HW_XEN_COMMON_H */
diff --git a/hw/xen_pci_passthrough.c b/hw/xen_pci_passthrough.c
new file mode 100644
index 0000000..998470b
--- /dev/null
+++ b/hw/xen_pci_passthrough.c
@@ -0,0 +1,831 @@
+/*
+ * Copyright (c) 2007, Neocleus Corporation.
+ * Copyright (c) 2007, Intel Corporation.
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2.  See
+ * the COPYING file in the top-level directory.
+ *
+ * Alex Novik <alex@xxxxxxxxxxxx>
+ * Allen Kay <allen.m.kay@xxxxxxxxx>
+ * Guy Zana <guy@xxxxxxxxxxxx>
+ *
+ * This file implements direct PCI assignment to a HVM guest
+ */
+
+/*
+ * Interrupt Disable policy:
+ *
+ * INTx interrupt:
+ *   Initialize(register_real_device)
+ *     Map INTx(xc_physdev_map_pirq):
+ *       <fail>
+ *         - Set real Interrupt Disable bit to '1'.
+ *         - Set machine_irq and assigned_device->machine_irq to '0'.
+ *         * Don't bind INTx.
+ *
+ *     Bind INTx(xc_domain_bind_pt_pci_irq):
+ *       <fail>
+ *         - Set real Interrupt Disable bit to '1'.
+ *         - Unmap INTx.
+ *         - Decrement mapped_machine_irq[machine_irq]
+ *         - Set assigned_device->machine_irq to '0'.
+ *
+ *   Write to Interrupt Disable bit by guest software(pt_cmd_reg_write)
+ *     Write '0'
+ *       <ptdev->msi_trans_en is false>
+ *         - Set real bit to '0' if assigned_device->machine_irq isn't '0'.
+ *
+ *     Write '1'
+ *       <ptdev->msi_trans_en is false>
+ *         - Set real bit to '1'.
+ */
+
+#include <sys/ioctl.h>
+
+#include "pci.h"
+#include "xen.h"
+#include "xen_backend.h"
+#include "xen_pci_passthrough.h"
+
+#define PCI_BAR_ENTRIES (6)
+
+#define PT_NR_IRQS          (256)
+char mapped_machine_irq[PT_NR_IRQS] = {0};
+
+void pt_log(const PCIDevice *d, const char *f, ...)
+{
+    va_list ap;
+
+    va_start(ap, f);
+    if (d) {
+        fprintf(stderr, "[%02x:%02x.%x] ", pci_bus_num(d->bus),
+                PCI_SLOT(d->devfn), PCI_FUNC(d->devfn));
+    }
+    vfprintf(stderr, f, ap);
+    va_end(ap);
+}
+
+
+/* Config Space */
+static int pt_pci_config_access_check(PCIDevice *d, uint32_t address, int len)
+{
+    /* check offset range */
+    if (address >= 0xFF) {
+        PT_ERR(d, "Failed to access register with offset exceeding 0xFF. "
+               "(addr: 0x%02x, len: %d)\n", address, len);
+        return -1;
+    }
+
+    /* check read size */
+    if ((len != 1) && (len != 2) && (len != 4)) {
+        PT_ERR(d, "Failed to access register with invalid access length. "
+               "(addr: 0x%02x, len: %d)\n", address, len);
+        return -1;
+    }
+
+    /* check offset alignment */
+    if (address & (len - 1)) {
+        PT_ERR(d, "Failed to access register with invalid access size "
+               "alignment. (addr: 0x%02x, len: %d)\n", address, len);
+        return -1;
+    }
+
+    return 0;
+}
+
+int pt_bar_offset_to_index(uint32_t offset)
+{
+    int index = 0;
+
+    /* check Exp ROM BAR */
+    if (offset == PCI_ROM_ADDRESS) {
+        return PCI_ROM_SLOT;
+    }
+
+    /* calculate BAR index */
+    index = (offset - PCI_BASE_ADDRESS_0) >> 2;
+    if (index >= PCI_NUM_REGIONS) {
+        return -1;
+    }
+
+    return index;
+}
+
+static uint32_t pt_pci_read_config(PCIDevice *d, uint32_t address, int len)
+{
+    XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, d);
+    uint32_t val = 0;
+    XenPTRegGroup *reg_grp_entry = NULL;
+    XenPTReg *reg_entry = NULL;
+    int rc = 0;
+    int emul_len = 0;
+    uint32_t find_addr = address;
+
+    if (pt_pci_config_access_check(d, address, len)) {
+        goto exit;
+    }
+
+    /* check power state transition flags */
+    if (s->pm_state != NULL && s->pm_state->flags & PT_FLAG_TRANSITING) {
+        /* can't accept until previous power state transition is completed.
+         * so finish previous request here.
+         */
+        PT_WARN(d, "Guest want to write during power state transition\n");
+        goto exit;
+    }
+
+    /* find register group entry */
+    reg_grp_entry = pt_find_reg_grp(s, address);
+    if (reg_grp_entry) {
+        /* check 0 Hardwired register group */
+        if (reg_grp_entry->reg_grp->grp_type == GRP_TYPE_HARDWIRED) {
+            /* no need to emulate, just return 0 */
+            val = 0;
+            goto exit;
+        }
+    }
+
+    /* read I/O device register value */
+    rc = host_pci_get_block(s->real_device, address, (uint8_t *)&val, len);
+    if (rc < 0) {
+        PT_ERR(d, "pci_read_block failed. return value: %d.\n", rc);
+        memset(&val, 0xff, len);
+    }
+
+    /* just return the I/O device register value for
+     * passthrough type register group */
+    if (reg_grp_entry == NULL) {
+        goto exit;
+    }
+
+    /* adjust the read value to appropriate CFC-CFF window */
+    val <<= (address & 3) << 3;
+    emul_len = len;
+
+    /* loop around the guest requested size */
+    while (emul_len > 0) {
+        /* find register entry to be emulated */
+        reg_entry = pt_find_reg(reg_grp_entry, find_addr);
+        if (reg_entry) {
+            XenPTRegInfo *reg = reg_entry->reg;
+            uint32_t real_offset = reg_grp_entry->base_offset + reg->offset;
+            uint32_t valid_mask = 0xFFFFFFFF >> ((4 - emul_len) << 3);
+            uint8_t *ptr_val = NULL;
+
+            valid_mask <<= (find_addr - real_offset) << 3;
+            ptr_val = (uint8_t *)&val + (real_offset & 3);
+
+            /* do emulation based on register size */
+            switch (reg->size) {
+            case 1:
+                if (reg->u.b.read) {
+                    rc = reg->u.b.read(s, reg_entry, ptr_val, valid_mask);
+                }
+                break;
+            case 2:
+                if (reg->u.w.read) {
+                    rc = reg->u.w.read(s, reg_entry,
+                                       (uint16_t *)ptr_val, valid_mask);
+                }
+                break;
+            case 4:
+                if (reg->u.dw.read) {
+                    rc = reg->u.dw.read(s, reg_entry,
+                                        (uint32_t *)ptr_val, valid_mask);
+                }
+                break;
+            }
+
+            if (rc < 0) {
+                xen_shutdown_fatal_error("Internal error: Invalid read "
+                                         "emulation. (%s, rc: %d)\n",
+                                         __func__, rc);
+                return 0;
+            }
+
+            /* calculate next address to find */
+            emul_len -= reg->size;
+            if (emul_len > 0) {
+                find_addr = real_offset + reg->size;
+            }
+        } else {
+            /* nothing to do with passthrough type register,
+             * continue to find next byte */
+            emul_len--;
+            find_addr++;
+        }
+    }
+
+    /* need to shift back before returning them to pci bus emulator */
+    val >>= ((address & 3) << 3);
+
+exit:
+    PT_LOG_CONFIG(d, address, val, len);
+    return val;
+}
+
+static void pt_pci_write_config(PCIDevice *d, uint32_t address,
+                                uint32_t val, int len)
+{
+    XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, d);
+    int index = 0;
+    XenPTRegGroup *reg_grp_entry = NULL;
+    int rc = 0;
+    uint32_t read_val = 0;
+    int emul_len = 0;
+    XenPTReg *reg_entry = NULL;
+    uint32_t find_addr = address;
+    XenPTRegInfo *reg = NULL;
+
+    if (pt_pci_config_access_check(d, address, len)) {
+        return;
+    }
+
+    PT_LOG_CONFIG(d, address, val, len);
+
+    /* check unused BAR register */
+    index = pt_bar_offset_to_index(address);
+    if ((index >= 0) && (val > 0 && val < PT_BAR_ALLF) &&
+        (s->bases[index].bar_flag == PT_BAR_FLAG_UNUSED)) {
+        PT_WARN(d, "Guest attempt to set address to unused Base Address "
+                "Register. (addr: 0x%02x, len: %d)\n", address, len);
+    }
+
+    /* check power state transition flags */
+    if (s->pm_state != NULL && s->pm_state->flags & PT_FLAG_TRANSITING) {
+        /* can't accept until previous power state transition is completed.
+         * so finish previous request here.
+         */
+        PT_WARN(d, "Guest want to write during power state transition\n");
+        return;
+    }
+
+    /* find register group entry */
+    reg_grp_entry = pt_find_reg_grp(s, address);
+    if (reg_grp_entry) {
+        /* check 0 Hardwired register group */
+        if (reg_grp_entry->reg_grp->grp_type == GRP_TYPE_HARDWIRED) {
+            /* ignore silently */
+            PT_WARN(d, "Access to 0 Hardwired register. "
+                    "(addr: 0x%02x, len: %d)\n", address, len);
+            return;
+        }
+    }
+
+    /* read I/O device register value */
+    rc = host_pci_get_block(s->real_device, address,
+                             (uint8_t *)&read_val, len);
+    if (rc < 0) {
+        PT_ERR(d, "pci_read_block failed. return value: %d.\n", rc);
+        memset(&read_val, 0xff, len);
+    }
+
+    /* pass directly to the real device for passthrough type register group */
+    if (reg_grp_entry == NULL) {
+        goto out;
+    }
+
+    /* adjust the read and write value to appropriate CFC-CFF window */
+    read_val <<= (address & 3) << 3;
+    val <<= (address & 3) << 3;
+    emul_len = len;
+
+    /* loop around the guest requested size */
+    while (emul_len > 0) {
+        /* find register entry to be emulated */
+        reg_entry = pt_find_reg(reg_grp_entry, find_addr);
+        if (reg_entry) {
+            reg = reg_entry->reg;
+            uint32_t real_offset = reg_grp_entry->base_offset + reg->offset;
+            uint32_t valid_mask = 0xFFFFFFFF >> ((4 - emul_len) << 3);
+            uint8_t *ptr_val = NULL;
+
+            valid_mask <<= (find_addr - real_offset) << 3;
+            ptr_val = (uint8_t *)&val + (real_offset & 3);
+
+            /* do emulation based on register size */
+            switch (reg->size) {
+            case 1:
+                if (reg->u.b.write) {
+                    rc = reg->u.b.write(s, reg_entry, ptr_val,
+                                        read_val >> ((real_offset & 3) << 3),
+                                        valid_mask);
+                }
+                break;
+            case 2:
+                if (reg->u.w.write) {
+                    rc = reg->u.w.write(s, reg_entry, (uint16_t *)ptr_val,
+                                        (read_val >> ((real_offset & 3) << 3)),
+                                        valid_mask);
+                }
+                break;
+            case 4:
+                if (reg->u.dw.write) {
+                    rc = reg->u.dw.write(s, reg_entry, (uint32_t *)ptr_val,
+                                         (read_val >> ((real_offset & 3) << 
3)),
+                                         valid_mask);
+                }
+                break;
+            }
+
+            if (rc < 0) {
+                xen_shutdown_fatal_error("Internal error: Invalid write"
+                                         " emulation. (%s, rc: %d)\n",
+                                         __func__, rc);
+                return;
+            }
+
+            /* calculate next address to find */
+            emul_len -= reg->size;
+            if (emul_len > 0) {
+                find_addr = real_offset + reg->size;
+            }
+        } else {
+            /* nothing to do with passthrough type register,
+             * continue to find next byte */
+            emul_len--;
+            find_addr++;
+        }
+    }
+
+    /* need to shift back before passing them to host_pci_device */
+    val >>= (address & 3) << 3;
+
+out:
+    if (!(reg && reg->no_wb)) {
+        /* unknown regs are passed through */
+        rc = host_pci_set_block(s->real_device, address, (uint8_t *)&val, len);
+
+        if (rc < 0) {
+            PT_ERR(d, "pci_write_block failed. return value: %d.\n", rc);
+        }
+    }
+}
+
+/* ioport/iomem space*/
+static void pt_iomem_map(XenPCIPassthroughState *s, int i,
+                         pcibus_t e_phys, pcibus_t e_size, int type)
+{
+    PCIIORegion *r = &s->dev.io_regions[i];
+    uint32_t old_ebase = s->bases[i].e_physbase;
+    bool first_map = s->bases[i].e_size == 0;
+    int ret = 0;
+
+    s->bases[i].e_physbase = e_phys;
+    s->bases[i].e_size = e_size;
+
+    PT_LOG(&s->dev, "e_phys=%#"PRIx64" maddr=%#"PRIx64" type=%d"
+           " len=%#"PRIx64" index=%d first_map=%d\n",
+           e_phys, s->bases[i].access.maddr, type,
+           e_size, i, first_map);
+
+    if (e_size == 0) {
+        return;
+    }
+
+    if (!first_map && old_ebase != PT_PCI_BAR_UNMAPPED) {
+        /* Remove old mapping */
+        memory_region_del_subregion(r->address_space,
+                                    r->memory);
+        ret = xc_domain_memory_mapping(xen_xc, xen_domid,
+                               old_ebase >> XC_PAGE_SHIFT,
+                               s->bases[i].access.maddr >> XC_PAGE_SHIFT,
+                               (e_size + XC_PAGE_SIZE - 1) >> XC_PAGE_SHIFT,
+                               DPCI_REMOVE_MAPPING);
+        if (ret != 0) {
+            PT_ERR(&s->dev, "remove old mapping failed!\n");
+            return;
+        }
+    }
+
+    /* map only valid guest address */
+    if (e_phys != PCI_BAR_UNMAPPED) {
+        /* Create new mapping */
+        memory_region_add_subregion_overlap(r->address_space,
+                                            e_phys, r->memory, 1);
+        ret = xc_domain_memory_mapping(xen_xc, xen_domid,
+                                   s->bases[i].e_physbase >> XC_PAGE_SHIFT,
+                                   s->bases[i].access.maddr >> XC_PAGE_SHIFT,
+                                   (e_size+XC_PAGE_SIZE-1) >> XC_PAGE_SHIFT,
+                                   DPCI_ADD_MAPPING);
+
+        if (ret != 0) {
+            PT_ERR(&s->dev, "create new mapping failed!\n");
+        }
+    }
+}
+
+static void pt_ioport_map(XenPCIPassthroughState *s, int i,
+                          pcibus_t e_phys, pcibus_t e_size, int type)
+{
+    PCIIORegion *r = &s->dev.io_regions[i];
+    uint32_t old_ebase = s->bases[i].e_physbase;
+    bool first_map = s->bases[i].e_size == 0;
+    int ret = 0;
+
+    s->bases[i].e_physbase = e_phys;
+    s->bases[i].e_size = e_size;
+
+    PT_LOG(&s->dev, "e_phys=%#04"PRIx64" pio_base=%#04"PRIx64" len=%"PRId64
+           " index=%d first_map=%d\n",
+           e_phys, s->bases[i].access.pio_base, e_size, i, first_map);
+
+    if (e_size == 0) {
+        return;
+    }
+
+    if (!first_map && old_ebase != PT_PCI_BAR_UNMAPPED) {
+        /* Remove old mapping */
+        memory_region_del_subregion(r->address_space,
+                                    r->memory);
+        ret = xc_domain_ioport_mapping(xen_xc, xen_domid, old_ebase,
+                                       s->bases[i].access.pio_base, e_size,
+                                       DPCI_REMOVE_MAPPING);
+        if (ret != 0) {
+            PT_ERR(&s->dev, "remove old mapping failed!\n");
+            return;
+        }
+    }
+
+    /* map only valid guest address (include 0) */
+    if (e_phys != PCI_BAR_UNMAPPED) {
+        /* Create new mapping */
+        memory_region_add_subregion_overlap(r->address_space,
+                                            e_phys, r->memory, 1);
+        ret = xc_domain_ioport_mapping(xen_xc, xen_domid, e_phys,
+                                       s->bases[i].access.pio_base, e_size,
+                                       DPCI_ADD_MAPPING);
+        if (ret != 0) {
+            PT_ERR(&s->dev, "create new mapping failed!\n");
+        }
+    }
+
+}
+
+
+/* mapping BAR */
+
+void pt_bar_mapping_one(XenPCIPassthroughState *s, int bar,
+                        int io_enable, int mem_enable)
+{
+    PCIDevice *dev = &s->dev;
+    PCIIORegion *r;
+    XenPTRegGroup *reg_grp_entry = NULL;
+    XenPTReg *reg_entry = NULL;
+    XenPTRegion *base = NULL;
+    pcibus_t r_size = 0, r_addr = PCI_BAR_UNMAPPED;
+    int rc = 0;
+
+    r = &dev->io_regions[bar];
+
+    /* check valid region */
+    if (!r->size) {
+        return;
+    }
+
+    base = &s->bases[bar];
+    /* skip unused BAR or upper 64bit BAR */
+    if ((base->bar_flag == PT_BAR_FLAG_UNUSED)
+        || (base->bar_flag == PT_BAR_FLAG_UPPER)) {
+           return;
+    }
+
+    /* copy region address to temporary */
+    r_addr = r->addr;
+
+    /* need unmapping in case I/O Space or Memory Space disable */
+    if (((base->bar_flag == PT_BAR_FLAG_IO) && !io_enable) ||
+        ((base->bar_flag == PT_BAR_FLAG_MEM) && !mem_enable)) {
+        r_addr = PCI_BAR_UNMAPPED;
+    }
+    if ((bar == PCI_ROM_SLOT) && (r_addr != PCI_BAR_UNMAPPED)) {
+        reg_grp_entry = pt_find_reg_grp(s, PCI_ROM_ADDRESS);
+        if (reg_grp_entry) {
+            reg_entry = pt_find_reg(reg_grp_entry, PCI_ROM_ADDRESS);
+            if (reg_entry && !(reg_entry->data & PCI_ROM_ADDRESS_ENABLE)) {
+                r_addr = PCI_BAR_UNMAPPED;
+            }
+        }
+    }
+
+    /* prevent guest software mapping memory resource to 00000000h */
+    if ((base->bar_flag == PT_BAR_FLAG_MEM) && (r_addr == 0)) {
+        r_addr = PCI_BAR_UNMAPPED;
+    }
+
+    r_size = pt_get_emul_size(base->bar_flag, r->size);
+
+    rc = pci_check_bar_overlap(dev, r_addr, r_size, r->type);
+    if (rc) {
+        PT_WARN(dev, "Region: %d (addr: %#"FMT_PCIBUS
+                ", len: %#"FMT_PCIBUS") is overlapped.\n",
+                bar, r_addr, r_size);
+    }
+
+    /* check whether we need to update the mapping or not */
+    if (r_addr != s->bases[bar].e_physbase) {
+        /* mapping BAR */
+        if (base->bar_flag == PT_BAR_FLAG_IO) {
+            pt_ioport_map(s, bar, r_addr, r_size, r->type);
+        } else {
+            pt_iomem_map(s, bar, r_addr, r_size, r->type);
+        }
+    }
+}
+
+void pt_bar_mapping(XenPCIPassthroughState *s, int io_enable, int mem_enable)
+{
+    int i;
+
+    for (i = 0; i < PCI_NUM_REGIONS; i++) {
+        pt_bar_mapping_one(s, i, io_enable, mem_enable);
+    }
+}
+
+static uint64_t bar_read(void *o, target_phys_addr_t addr, unsigned size)
+{
+    PCIDevice *d = o;
+    PT_ERR(d, "Should not read BAR through QEMU. @0x"TARGET_FMT_plx"\n", addr);
+    return 0;
+}
+static void bar_write(void *o, target_phys_addr_t addr,
+                      uint64_t data, unsigned size)
+{
+    PCIDevice* d = o;
+    PT_ERR(d, "Should not write BAR through QEMU. @0x"TARGET_FMT_plx"\n", 
addr);
+}
+
+static const MemoryRegionOps ops = {
+    .endianness = DEVICE_NATIVE_ENDIAN,
+    .read = bar_read,
+    .write = bar_write,
+};
+
+/* register regions */
+static int pt_register_regions(XenPCIPassthroughState *s)
+{
+    int i = 0;
+    uint32_t bar_data = 0;
+    HostPCIDevice *d = s->real_device;
+
+    /* Register PIO/MMIO BARs */
+    for (i = 0; i < PCI_BAR_ENTRIES; i++) {
+        HostPCIIORegion *r = &d->io_regions[i];
+
+        if (r->base_addr && r->size) {
+            s->bases[i].e_physbase = r->base_addr;
+            s->bases[i].access.u = r->base_addr;
+
+            /* Register current region */
+            if (r->flags & IORESOURCE_IO) {
+                memory_region_init_io(&s->bar[i], &ops, &s->dev,
+                                      "xen-pci-pt-bar-io", r->size);
+                pci_register_bar(&s->dev, i, PCI_BASE_ADDRESS_SPACE_IO,
+                                 &s->bar[i]);
+            } else if (r->flags & IORESOURCE_PREFETCH) {
+                memory_region_init_io(&s->bar[i], &ops, &s->dev,
+                                      "xen-pci-pt-bar-mem", r->size);
+                pci_register_bar(&s->dev, i, PCI_BASE_ADDRESS_MEM_PREFETCH,
+                                 &s->bar[i]);
+            } else {
+                memory_region_init_io(&s->bar[i], &ops, &s->dev,
+                                      "xen-pci-pt-bar-mem", r->size);
+                pci_register_bar(&s->dev, i, PCI_BASE_ADDRESS_SPACE_MEMORY,
+                                 &s->bar[i]);
+            }
+
+            PT_LOG(&s->dev, "IO region registered (size=0x%08"PRIx64
+                   " base_addr=0x%08"PRIx64")\n",
+                   r->size, r->base_addr);
+        }
+    }
+
+    /* Register expansion ROM address */
+    if (d->rom.base_addr && d->rom.size) {
+        /* Re-set BAR reported by OS, otherwise ROM can't be read. */
+        if (host_pci_get_long(d, PCI_ROM_ADDRESS, &bar_data)) {
+            return 0;
+        }
+        if ((bar_data & PCI_ROM_ADDRESS_MASK) == 0) {
+            bar_data |= d->rom.base_addr & PCI_ROM_ADDRESS_MASK;
+            host_pci_set_long(d, PCI_ROM_ADDRESS, bar_data);
+        }
+
+        s->bases[PCI_ROM_SLOT].e_physbase = d->rom.base_addr;
+        s->bases[PCI_ROM_SLOT].access.maddr = d->rom.base_addr;
+
+        memory_region_init_rom_device(&s->rom, NULL, NULL, &s->dev.qdev,
+                                      "xen-pci-pt-rom", d->rom.size);
+        pci_register_bar(&s->dev, PCI_ROM_SLOT, PCI_BASE_ADDRESS_MEM_PREFETCH,
+                         &s->rom);
+
+        PT_LOG(&s->dev, "Expansion ROM registered (size=0x%08"PRIx64
+               " base_addr=0x%08"PRIx64")\n",
+               d->rom.size, d->rom.base_addr);
+    }
+
+    return 0;
+}
+
+static void pt_unregister_regions(XenPCIPassthroughState *s)
+{
+    int i, type, rc;
+    uint32_t e_size;
+    PCIDevice *d = &s->dev;
+
+    for (i = 0; i < PCI_NUM_REGIONS; i++) {
+        e_size = s->bases[i].e_size;
+        if ((e_size == 0) || (s->bases[i].e_physbase == PT_PCI_BAR_UNMAPPED)) {
+            continue;
+        }
+
+        type = d->io_regions[i].type;
+
+        if (type == PCI_BASE_ADDRESS_SPACE_MEMORY
+            || type == PCI_BASE_ADDRESS_MEM_PREFETCH) {
+            rc = xc_domain_memory_mapping(xen_xc, xen_domid,
+                    s->bases[i].e_physbase >> XC_PAGE_SHIFT,
+                    s->bases[i].access.maddr >> XC_PAGE_SHIFT,
+                    (e_size+XC_PAGE_SIZE-1) >> XC_PAGE_SHIFT,
+                    DPCI_REMOVE_MAPPING);
+            if (rc != 0) {
+                PT_ERR(d, "remove old mem mapping failed!\n");
+                continue;
+            }
+
+        } else if (type == PCI_BASE_ADDRESS_SPACE_IO) {
+            rc = xc_domain_ioport_mapping(xen_xc, xen_domid,
+                        s->bases[i].e_physbase,
+                        s->bases[i].access.pio_base,
+                        e_size,
+                        DPCI_REMOVE_MAPPING);
+            if (rc != 0) {
+                PT_ERR(d, "remove old io mapping failed!\n");
+                continue;
+            }
+        }
+    }
+}
+
+static int pt_initfn(PCIDevice *pcidev)
+{
+    XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, pcidev);
+    int dom, bus;
+    unsigned slot, func;
+    int rc = 0;
+    uint8_t machine_irq = 0;
+    int pirq = PT_UNASSIGNED_PIRQ;
+
+    if (pci_parse_devaddr(s->hostaddr, &dom, &bus, &slot, &func) < 0) {
+        PT_ERR(pcidev, "Failed to parse BDF: %s\n", s->hostaddr);
+        return -1;
+    }
+
+    /* register real device */
+    PT_LOG(pcidev, "Assigning real physical device %02x:%02x.%x"
+           " to devfn %#x\n", bus, slot, func, s->dev.devfn);
+
+    s->real_device = host_pci_device_get(bus, slot, func);
+    if (!s->real_device) {
+        return -1;
+    }
+
+    s->is_virtfn = s->real_device->is_virtfn;
+    if (s->is_virtfn) {
+        PT_LOG(pcidev, "%04x:%02x:%02x.%x is a SR-IOV Virtual Function\n",
+               s->real_device->domain, bus, slot, func);
+    }
+
+    /* Initialize virtualized PCI configuration (Extended 256 Bytes) */
+    if (host_pci_get_block(s->real_device, 0, pcidev->config,
+                           PCI_CONFIG_SPACE_SIZE) == -1) {
+        host_pci_device_put(s->real_device);
+        return -1;
+    }
+
+    /* Handle real device's MMIO/PIO BARs */
+    pt_register_regions(s);
+
+    /* Bind interrupt */
+    if (!s->dev.config[PCI_INTERRUPT_PIN]) {
+        PT_LOG(pcidev, "no pin interrupt\n");
+        goto out;
+    }
+
+    host_pci_get_byte(s->real_device, PCI_INTERRUPT_LINE, &machine_irq);
+    rc = xc_physdev_map_pirq(xen_xc, xen_domid, machine_irq, &pirq);
+
+    if (rc < 0) {
+        PT_ERR(pcidev, "Mapping machine irq %u to pirq %i failed, (rc: %d)\n",
+               machine_irq, pirq, rc);
+
+        /* Disable PCI intx assertion (turn on bit10 of devctl) */
+        host_pci_set_word(s->real_device,
+                          PCI_COMMAND,
+                          pci_get_word(s->dev.config + PCI_COMMAND)
+                          | PCI_COMMAND_INTX_DISABLE);
+        machine_irq = 0;
+        s->machine_irq = 0;
+    } else {
+        machine_irq = pirq;
+        s->machine_irq = pirq;
+        mapped_machine_irq[machine_irq]++;
+    }
+
+    /* bind machine_irq to device */
+    if (rc < 0 && machine_irq != 0) {
+        uint8_t e_device = PCI_SLOT(s->dev.devfn);
+        uint8_t e_intx = pci_intx(s);
+
+        rc = xc_domain_bind_pt_pci_irq(xen_xc, xen_domid, machine_irq, 0,
+                                       e_device, e_intx);
+        if (rc < 0) {
+            PT_ERR(pcidev, "Binding of interrupt %i failed! (rc: %d)\n",
+                   e_intx, rc);
+
+            /* Disable PCI intx assertion (turn on bit10 of devctl) */
+            host_pci_set_word(s->real_device, PCI_COMMAND,
+                              *(uint16_t *)(&s->dev.config[PCI_COMMAND])
+                              | PCI_COMMAND_INTX_DISABLE);
+            mapped_machine_irq[machine_irq]--;
+
+            if (mapped_machine_irq[machine_irq] == 0) {
+                if (xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq)) {
+                    PT_ERR(pcidev, "Unmapping of machine interrupt %i failed!"
+                           " (rc: %d)\n", machine_irq, rc);
+                }
+            }
+            s->machine_irq = 0;
+        }
+    }
+
+out:
+    PT_LOG(pcidev, "Real physical device %02x:%02x.%x registered successfuly!"
+           "\nIRQ type = %s\n", bus, slot, func, "INTx");
+
+    return 0;
+}
+
+static int pt_unregister_device(PCIDevice *pcidev)
+{
+    XenPCIPassthroughState *s = DO_UPCAST(XenPCIPassthroughState, dev, pcidev);
+    uint8_t e_device, e_intx;
+    uint8_t machine_irq;
+    int rc;
+
+    /* Unbind interrupt */
+    e_device = PCI_SLOT(s->dev.devfn);
+    e_intx = pci_intx(s);
+    machine_irq = s->machine_irq;
+
+    if (machine_irq) {
+        rc = xc_domain_unbind_pt_irq(xen_xc, xen_domid, machine_irq,
+                                     PT_IRQ_TYPE_PCI, 0, e_device, e_intx, 0);
+        if (rc < 0) {
+            PT_ERR(pcidev, "Unbinding of interrupt failed! rc=%d\n", rc);
+        }
+    }
+
+    if (machine_irq) {
+        mapped_machine_irq[machine_irq]--;
+
+        if (mapped_machine_irq[machine_irq] == 0) {
+            rc = xc_physdev_unmap_pirq(xen_xc, xen_domid, machine_irq);
+
+            if (rc < 0) {
+                PT_ERR(pcidev, "Unmaping of interrupt failed! rc=%d\n", rc);
+            }
+        }
+    }
+
+    /* unregister real device's MMIO/PIO BARs */
+    pt_unregister_regions(s);
+
+    host_pci_device_put(s->real_device);
+
+    return 0;
+}
+
+static PCIDeviceInfo xen_pci_passthrough = {
+    .init = pt_initfn,
+    .exit = pt_unregister_device,
+    .qdev.name = "xen-pci-passthrough",
+    .qdev.desc = "Assign an host pci device with Xen",
+    .qdev.size = sizeof(XenPCIPassthroughState),
+    .config_read = pt_pci_read_config,
+    .config_write = pt_pci_write_config,
+    .is_express = 0,
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_STRING("hostaddr", XenPCIPassthroughState, hostaddr),
+        DEFINE_PROP_BIT("power-mgmt", XenPCIPassthroughState, power_mgmt,
+                        0, false),
+        DEFINE_PROP_END_OF_LIST(),
+    }
+};
+
+static void xen_passthrough_register(void)
+{
+    pci_qdev_register(&xen_pci_passthrough);
+}
+
+device_init(xen_passthrough_register);
diff --git a/hw/xen_pci_passthrough.h b/hw/xen_pci_passthrough.h
new file mode 100644
index 0000000..110325c
--- /dev/null
+++ b/hw/xen_pci_passthrough.h
@@ -0,0 +1,282 @@
+#ifndef QEMU_HW_XEN_PCI_PASSTHROUGH_H
+#  define QEMU_HW_XEN_PCI_PASSTHROUGH_H
+
+#include "qemu-common.h"
+#include "xen_common.h"
+#include "pci.h"
+#include "host-pci-device.h"
+
+/* #define PT_LOGGING_ENABLED */
+/* #define PT_DEBUG_PCI_CONFIG_ACCESS */
+
+void pt_log(const PCIDevice *d, const char *f, ...) GCC_FMT_ATTR(2, 3);
+
+#define PT_ERR(d, _f, _a...)  pt_log(d, "%s: Error: " _f, __func__, ##_a)
+
+#ifdef PT_LOGGING_ENABLED
+#  define PT_LOG(d, _f, _a...)  pt_log(d, "%s: " _f, __func__, ##_a)
+#  define PT_WARN(d, _f, _a...) pt_log(d, "%s: Warning: " _f, __func__, ##_a)
+#else
+#  define PT_LOG(d, _f, _a...)
+#  define PT_WARN(d, _f, _a...)
+#endif
+
+#ifdef PT_DEBUG_PCI_CONFIG_ACCESS
+#  define PT_LOG_CONFIG(d, addr, val, len) \
+    pt_log(d, "%s: address=0x%04x val=0x%08x len=%d\n", \
+           __func__, addr, val, len)
+#else
+#  define PT_LOG_CONFIG(d, addr, val, len)
+#endif
+
+
+typedef struct XenPTRegInfo XenPTRegInfo;
+typedef struct XenPTReg XenPTReg;
+
+typedef struct XenPCIPassthroughState XenPCIPassthroughState;
+
+/* function type for config reg */
+typedef int (*conf_reg_init)
+    (XenPCIPassthroughState *, XenPTRegInfo *, uint32_t real_offset,
+     uint32_t *data);
+typedef int (*conf_dword_write)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+     uint32_t *val, uint32_t dev_value, uint32_t valid_mask);
+typedef int (*conf_word_write)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+     uint16_t *val, uint16_t dev_value, uint16_t valid_mask);
+typedef int (*conf_byte_write)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+     uint8_t *val, uint8_t dev_value, uint8_t valid_mask);
+typedef int (*conf_dword_read)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+     uint32_t *val, uint32_t valid_mask);
+typedef int (*conf_word_read)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+     uint16_t *val, uint16_t valid_mask);
+typedef int (*conf_byte_read)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry,
+     uint8_t *val, uint8_t valid_mask);
+typedef int (*conf_dword_restore)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry, uint32_t real_offset,
+     uint32_t dev_value, uint32_t *val);
+typedef int (*conf_word_restore)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry, uint32_t real_offset,
+     uint16_t dev_value, uint16_t *val);
+typedef int (*conf_byte_restore)
+    (XenPCIPassthroughState *, XenPTReg *cfg_entry, uint32_t real_offset,
+     uint8_t dev_value, uint8_t *val);
+
+/* power state transition */
+#define PT_FLAG_TRANSITING  0x0001
+
+#define PT_BAR_ALLF         0xFFFFFFFF  /* BAR ALLF value */
+#define PT_PCI_BAR_UNMAPPED (-1)
+#define PT_UNASSIGNED_PIRQ (-1)
+
+
+typedef enum {
+    GRP_TYPE_HARDWIRED = 0,                     /* 0 Hardwired reg group */
+    GRP_TYPE_EMU,                               /* emul reg group */
+} RegisterGroupType;
+
+typedef enum {
+    PT_BAR_FLAG_MEM = 0,                        /* Memory type BAR */
+    PT_BAR_FLAG_IO,                             /* I/O type BAR */
+    PT_BAR_FLAG_UPPER,                          /* upper 64bit BAR */
+    PT_BAR_FLAG_UNUSED,                         /* unused BAR */
+} PTBarFlag;
+
+
+typedef struct XenPTRegion {
+    /* Virtual phys base & size */
+    uint32_t e_physbase;
+    uint32_t e_size;
+    /* Index of region in qemu */
+    uint32_t memory_index;
+    /* BAR flag */
+    PTBarFlag bar_flag;
+    /* Translation of the emulated address */
+    union {
+        uint64_t maddr;
+        uint64_t pio_base;
+        uint64_t u;
+    } access;
+} XenPTRegion;
+
+/* XenPTRegInfo declaration
+ * - only for emulated register (either a part or whole bit).
+ * - for passthrough register that need special behavior (like interacting with
+ *   other component), set emu_mask to all 0 and specify r/w func properly.
+ * - do NOT use ALL F for init_val, otherwise the tbl will not be registered.
+ */
+
+/* emulated register infomation */
+struct XenPTRegInfo {
+    uint32_t offset;
+    uint32_t size;
+    uint32_t init_val;
+    /* reg read only field mask (ON:RO/ROS, OFF:other) */
+    uint32_t ro_mask;
+    /* reg emulate field mask (ON:emu, OFF:passthrough) */
+    uint32_t emu_mask;
+    /* no write back allowed */
+    uint32_t no_wb;
+    conf_reg_init init;
+    /* read/write/restore function pointer
+     * for double_word/word/byte size */
+    union {
+        struct {
+            conf_dword_write write;
+            conf_dword_read read;
+            conf_dword_restore restore;
+        } dw;
+        struct {
+            conf_word_write write;
+            conf_word_read read;
+            conf_word_restore restore;
+        } w;
+        struct {
+            conf_byte_write write;
+            conf_byte_read read;
+            conf_byte_restore restore;
+        } b;
+    } u;
+};
+
+/* emulated register management */
+struct XenPTReg {
+    QLIST_ENTRY(XenPTReg) entries;
+    XenPTRegInfo *reg;
+    uint32_t data;
+};
+
+typedef struct XenPTRegGroupInfo XenPTRegGroupInfo;
+
+/* emul reg group size initialize method */
+typedef int (*pt_reg_size_init_fn)
+    (XenPCIPassthroughState *, const XenPTRegGroupInfo *,
+     uint32_t base_offset, uint8_t *size);
+
+/* emulated register group infomation */
+struct XenPTRegGroupInfo {
+    uint8_t grp_id;
+    RegisterGroupType grp_type;
+    uint8_t grp_size;
+    pt_reg_size_init_fn size_init;
+    XenPTRegInfo *emu_reg_tbl;
+};
+
+/* emul register group management table */
+typedef struct XenPTRegGroup {
+    QLIST_ENTRY(XenPTRegGroup) entries;
+    const XenPTRegGroupInfo *reg_grp;
+    uint32_t base_offset;
+    uint8_t size;
+    QLIST_HEAD(, XenPTReg) reg_tbl_list;
+} XenPTRegGroup;
+
+
+typedef struct XenPTPM {
+    QEMUTimer *pm_timer;  /* QEMUTimer struct */
+    int no_soft_reset;    /* No Soft Reset flags */
+    uint16_t flags;       /* power state transition flags */
+    uint16_t pmc_field;   /* Power Management Capabilities field */
+    int pm_delay;         /* power state transition delay */
+    uint16_t cur_state;   /* current power state */
+    uint16_t req_state;   /* requested power state */
+    uint32_t pm_base;     /* Power Management Capability reg base offset */
+    uint32_t aer_base;    /* AER Capability reg base offset */
+} XenPTPM;
+
+struct XenPCIPassthroughState {
+    PCIDevice dev;
+
+    char *hostaddr;
+    bool is_virtfn;
+    HostPCIDevice *real_device;
+    XenPTRegion bases[PCI_NUM_REGIONS]; /* Access regions */
+    QLIST_HEAD(, XenPTRegGroup) reg_grp_tbl;
+
+    uint32_t machine_irq;
+
+    uint32_t power_mgmt;
+    XenPTPM *pm_state;
+
+    MemoryRegion bar[PCI_NUM_REGIONS - 1];
+    MemoryRegion rom;
+};
+
+int pt_config_init(XenPCIPassthroughState *s);
+void pt_config_delete(XenPCIPassthroughState *s);
+void pt_bar_mapping(XenPCIPassthroughState *s, int io_enable, int mem_enable);
+void pt_bar_mapping_one(XenPCIPassthroughState *s, int bar,
+                        int io_enable, int mem_enable);
+XenPTRegGroup *pt_find_reg_grp(XenPCIPassthroughState *s, uint32_t address);
+XenPTReg *pt_find_reg(XenPTRegGroup *reg_grp, uint32_t address);
+int pt_bar_offset_to_index(uint32_t offset);
+
+static inline pcibus_t pt_get_emul_size(PTBarFlag flag, pcibus_t r_size)
+{
+    /* align resource size (memory type only) */
+    if (flag == PT_BAR_FLAG_MEM) {
+        return (r_size + XC_PAGE_SIZE - 1) & XC_PAGE_MASK;
+    } else {
+        return r_size;
+    }
+}
+
+/* INTx */
+/* The PCI Local Bus Specification, Rev. 3.0,
+ * Section 6.2.4 Miscellaneous Registers, pp 223
+ * outlines 5 valid values for the intertupt pin (intx).
+ *  0: For devices (or device functions) that don't use an interrupt in
+ *  1: INTA#
+ *  2: INTB#
+ *  3: INTC#
+ *  4: INTD#
+ *
+ * Xen uses the following 4 values for intx
+ *  0: INTA#
+ *  1: INTB#
+ *  2: INTC#
+ *  3: INTD#
+ *
+ * Observing that these list of values are not the same, pci_read_intx()
+ * uses the following mapping from hw to xen values.
+ * This seems to reflect the current usage within Xen.
+ *
+ * PCI hardware    | Xen | Notes
+ * ----------------+-----+----------------------------------------------------
+ * 0               | 0   | No interrupt
+ * 1               | 0   | INTA#
+ * 2               | 1   | INTB#
+ * 3               | 2   | INTC#
+ * 4               | 3   | INTD#
+ * any other value | 0   | This should never happen, log error message
+ */
+
+static inline uint8_t pci_read_intx(XenPCIPassthroughState *s)
+{
+    uint8_t v = 0;
+    host_pci_get_byte(s->real_device, PCI_INTERRUPT_PIN, &v);
+    return v;
+}
+
+static inline uint8_t pci_intx(XenPCIPassthroughState *s)
+{
+    uint8_t r_val = pci_read_intx(s);
+
+    PT_LOG(&s->dev, "intx=%i\n", r_val);
+    if (r_val < 1 || r_val > 4) {
+        PT_LOG(&s->dev, "Interrupt pin read from hardware is out of range:"
+               " value=%i, acceptable range is 1 - 4\n", r_val);
+        r_val = 0;
+    } else {
+        r_val -= 1;
+    }
+
+    return r_val;
+}
+
+#endif /* !QEMU_HW_XEN_PCI_PASSTHROUGH_H */
diff --git a/hw/xen_pci_passthrough_config_init.c 
b/hw/xen_pci_passthrough_config_init.c
new file mode 100644
index 0000000..1e9de64
--- /dev/null
+++ b/hw/xen_pci_passthrough_config_init.c
@@ -0,0 +1,11 @@
+#include "xen_pci_passthrough.h"
+
+XenPTRegGroup *pt_find_reg_grp(XenPCIPassthroughState *s, uint32_t address)
+{
+    return NULL;
+}
+
+XenPTReg *pt_find_reg(XenPTRegGroup *reg_grp, uint32_t address)
+{
+    return NULL;
+}
diff --git a/xen-all.c b/xen-all.c
index b5e28ab..0e3bbcf 100644
--- a/xen-all.c
+++ b/xen-all.c
@@ -979,3 +979,15 @@ void destroy_hvm_domain(void)
         xc_interface_close(xc_handle);
     }
 }
+
+void xen_shutdown_fatal_error(const char *fmt, ...)
+{
+    va_list ap;
+
+    va_start(ap, fmt);
+    vfprintf(stderr, fmt, ap);
+    va_end(ap);
+    fprintf(stderr, "Will destroy the domain.\n");
+    /* destroy the domain */
+    qemu_system_shutdown_request();
+}
-- 
Anthony PERARD


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.