[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [Xen-users] Problem booting xen 4.1.2 on Athlon 64 X2



Am 22.12.2011 13:54, schrieb Igor Mammedov:
On 12/22/2011 12:49 AM, Florian Manschwetus wrote:
(XEN) AMD-Vi: IOMMU not found!
(XEN) I/O virtualisation disabled

I've seen the same issue on a AMD system with upstream xen and
host booted after iommu=off was added to xen's cmd line..
Although log says that there isn't iommu, but it worth the shot.


Same, here doesn't fix :(

Thx,
Florian


Loading Xen 4.1.2 ...
Loading Linux x86_64-3.1.5-gentoo ...
Loading initial ramdisk ...
 __  __            _  _    _   ____
 \ \/ /___ _ __   | || |  / | |___ \
  \  // _ \ '_ \  | || |_ | |   __) |
  /  \  __/ | | | |__   _|| |_ / __/
 /_/\_\___|_| |_|    |_|(_)_(_)_____|

(XEN) Xen version 4.1.2 (@) (gcc-Version 4.6.2 (Gentoo 4.6.2 p1.0, pie-0.4.5) ) Thu Dec 15 17:51:19 CET 2011
(XEN) Latest ChangeSet: unavailable
(XEN) Console output is synchronous.
(XEN) Bootloader: GRUB 1.99
(XEN) Command line: placeholder sync_console console_to_ring com1=115200,8n1 console=com1,vga loglvl=all lapic=debug apic_verbosity=debug apic=debug iommu=off
(XEN) Video information:
(XEN)  VGA is text mode 80x25, font 8x16
(XEN)  VBE/DDC methods: none; EDID transfer time: 0 seconds
(XEN)  EDID info not retrieved because no DDC retrieval method detected
(XEN) Disc information:
(XEN)  Found 1 MBR signatures
(XEN)  Found 1 EDD information structures
(XEN) Xen-e820 RAM map:
(XEN)  0000000000000000 - 000000000009fc00 (usable)
(XEN)  000000000009fc00 - 00000000000a0000 (reserved)
(XEN)  00000000000e0000 - 0000000000100000 (reserved)
(XEN)  0000000000100000 - 00000000bffc0000 (usable)
(XEN)  00000000bffc0000 - 00000000bffce000 (ACPI data)
(XEN)  00000000bffce000 - 00000000bfff0000 (ACPI NVS)
(XEN)  00000000bfff0000 - 00000000c0000000 (reserved)
(XEN)  00000000fec00000 - 00000000fec01000 (reserved)
(XEN)  00000000fee00000 - 00000000fef00000 (reserved)
(XEN)  00000000ff780000 - 0000000100000000 (reserved)
(XEN)  0000000100000000 - 0000000140000000 (usable)
(XEN) ACPI: RSDP 000FB840, 0024 (r2 ACPIAM)
(XEN) ACPI: XSDT BFFC0100, 004C (r1 A_M_I_ OEMXSDT   3000826 MSFT       97)
(XEN) ACPI: FACP BFFC0290, 00F4 (r3 A_M_I_ OEMFACP   3000826 MSFT       97)
(XEN) ACPI: DSDT BFFC05C0, 4E38 (r1  A0557 A0557000        0 INTL 20051117)
(XEN) ACPI: FACS BFFCE000, 0040
(XEN) ACPI: APIC BFFC0390, 0070 (r1 A_M_I_ OEMAPIC   3000826 MSFT       97)
(XEN) ACPI: MCFG BFFC0400, 003C (r1 A_M_I_ OEMMCFG   3000826 MSFT       97)
(XEN) ACPI: OEMB BFFCE040, 0060 (r1 A_M_I_ AMI_OEM   3000826 MSFT       97)
(XEN) ACPI: HPET BFFC5400, 0038 (r1 A_M_I_ OEMHPET0  3000826 MSFT       97)
(XEN) System RAM: 4095MB (4193660kB)
(XEN) No NUMA configuration found
(XEN) Faking a node at 0000000000000000-0000000140000000
(XEN) Domain heap initialised
(XEN) found SMP MP-table at 000ff780
(XEN) DMI present.
(XEN) APIC boot state is 'xapic'
(XEN) Using APIC driver default
(XEN) ACPI: PM-Timer IO Port: 0x508
(XEN) ACPI: ACPI SLEEP INFO: pm1x_cnt[504,0], pm1x_evt[500,0]
(XEN) ACPI:                  wakeup_vec[bffce00c], vec_size[20]
(XEN) ACPI: Local APIC address 0xfee00000
(XEN) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
(XEN) Processor #0 15:3 APIC version 16
(XEN) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
(XEN) Processor #1 15:3 APIC version 16
(XEN) ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
(XEN) IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 0 dfl dfl)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
(XEN) ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
(XEN) ACPI: IRQ0 used by override.
(XEN) ACPI: IRQ9 used by override.
(XEN) ACPI: IRQ14 used by override.
(XEN) ACPI: IRQ15 used by override.
(XEN) Enabling APIC mode:  Flat.  Using 1 I/O APICs
(XEN) ACPI: HPET id: 0x10de8201 base: 0xfed00000
(XEN) PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
(XEN) PCI: Not using MMCONFIG.
(XEN) Table is not found!
(XEN) Using ACPI (MADT) for SMP configuration information
(XEN) mapped APIC to ffff82c3ffffe000 (fee00000)
(XEN) mapped IOAPIC to ffff82c3ffffd000 (fec00000)
(XEN) IRQ limits: 24 GSI, 376 MSI/MSI-X
(XEN) Using scheduler: SMP Credit Scheduler (credit)
(XEN) Detected 2611.851 MHz processor.
(XEN) Initing memory sharing.
(XEN) AMD K8 machine check reporting enabled
(XEN) I/O virtualisation disabled
(XEN) Getting VERSION: 80050010
(XEN) Getting VERSION: 80050010
(XEN) Getting ID: 0
(XEN) Getting LVT0: 700
(XEN) Getting LVT1: 400
(XEN) enabled ExtINT on CPU#0
(XEN) ESR value before enabling vector: 0x00000004  after: 0x00000000
(XEN) ENABLING IO-APIC IRQs
(XEN)  -> Using new ACK method
(XEN) init IO_APIC IRQs
(XEN) IO-APIC (apicid-pin) 2-16, 2-17, 2-18, 2-19, 2-20, 2-21, 2-22, 2-23 not connected.
(XEN) ..TIMER: vector=0xF0 apic1=0 pin1=0 apic2=-1 pin2=-1
(XEN) ..MP-BIOS bug: 8254 timer not connected to IO-APIC
(XEN) ...trying to set up timer (IRQ0) through the 8259A ...  failed.
(XEN) ...trying to set up timer as Virtual Wire IRQ... failed.
(XEN) ...trying to set up timer as ExtINT IRQ... failed :(.
(XEN)
(XEN) ****************************************
(XEN) Panic on CPU 0:
(XEN) IO-APIC + timer doesn't work! Boot with apic_verbosity=debug and send a report. Then try booting with the 'noapic' option****************************************
(XEN)
(XEN) Reboot in five seconds...

Attachment: smime.p7s
Description: S/MIME Kryptografische Unterschrift

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.