Re: [Xen-devel] After switching from "xm" to "xl" toolstack, can't get Guest networking to work.

[erin.balid@xxxxxxxxxxxx]

Hi Roger.

Here is "ifconfig -a" output from the DomU when launched with xm.

xm create test.cfg
xm list
 Name                                        ID   Mem VCPUs      State  
 Time(s)
 Domain-0                                     0  1010     1     r-----  
  913.4
 template                                     1  2048     2     -b----  
   86.0
xm console template
 ...
ifconfig -a
 eth0      Link encap:Ethernet  HWaddr 00:16:3E:12:34:01
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:38658 errors:0 dropped:24935 overruns:0 frame:0
           TX packets:11009 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:2621879 (2.5 Mb)  TX bytes:10432153 (9.9 Mb)
 
 eth0:1    Link encap:Ethernet  HWaddr 00:16:3E:12:34:01
           inet addr:192.168.1.32   Bcast:192.168.1.255 
           Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 
 lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:7 errors:0 dropped:0 overruns:0 frame:0
           TX packets:7 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:563 (563.0 b)  TX bytes:563 (563.0 b)


And, "ifconfig -a" output from the DomU when launched with xl.

xl create test.cfg
xl list
 Name                                        ID   Mem VCPUs      State  
 Time(s)
 Domain-0                                     0  1010     1     r-----  
    66.8
 template                                     1  2048     2     -b----  
     6.8

ifconfig -a
 eth0      Link encap:Ethernet  HWaddr 00:16:3E:12:34:01
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
           RX packets:0 errors:0 dropped:0 overruns:0 frame:0
           TX packets:114 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:1000
           RX bytes:0 (0.0 b)  TX bytes:5241 (5.1 Kb)
 
 eth0:1    Link encap:Ethernet  HWaddr 00:16:3E:12:34:01
           inet addr:192.168.1.32   Bcast:192.168.1.255 
           Mask:255.255.255.0
           UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
 
 lo        Link encap:Local Loopback
           inet addr:127.0.0.1  Mask:255.0.0.0
           UP LOOPBACK RUNNING  MTU:16436  Metric:1
           RX packets:52 errors:0 dropped:0 overruns:0 frame:0
           TX packets:52 errors:0 dropped:0 overruns:0 carrier:0
           collisions:0 txqueuelen:0
           RX bytes:4431 (4.3 Kb)  TX bytes:4431 (4.3 Kb)

> Also paste the output from "xenstore-ls -fp" on the Dom0 when the xl
> DomU is up and running. From what I saw above in /var/log/messages the
> problem seem to be related to hotplug scripts.

Here is the paste of that output. ===> http://pastebin.com/s0e03VnW


On Sun, Jan 22, 2012, at 10:49 AM, djmagee@xxxxxxxxxxxx wrote:
> You're missing the opening single quote on your vif line.

That's just a copy/paste typo in the email.

Regards,

Erin

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxxxxxxxx
http://lists.xensource.com/xen-devel