[Xen-devel] [PATCH] doc, Remove qemu-upstream HowTo, and link to the wiki page.

[Anthony PERARD <anthony.perard@xxxxxxxxxx>]

Instead of having twice the same HowTo in tree and in the wiki, the one in tree
will become a link to the wiki.

Signed-off-by: Anthony PERARD <anthony.perard@xxxxxxxxxx>

---
 docs/misc/qemu-upstream_howto_use_it.markdown |  128 +------------------------
 1 files changed, 5 insertions(+), 123 deletions(-)

diff --git a/docs/misc/qemu-upstream_howto_use_it.markdown 
b/docs/misc/qemu-upstream_howto_use_it.markdown
index c7441c4..455eac6 100644
--- a/docs/misc/qemu-upstream_howto_use_it.markdown
+++ b/docs/misc/qemu-upstream_howto_use_it.markdown
@@ -1,130 +1,12 @@
 Using Upstream QEMU with Xen
 ============================
 
-Note
-----
+If you want to build with the QEMU unstable tree, follow the wiki page:
+  [http://wiki.xen.org/wiki/QEMU_Upstream]()
 
-All these steps will become unnecessary after the patches to integrate
-SeaBIOS/QEMU into the Xen build system have been applied.
-
-
-How to build it
----------------
-
-### SeaBIOS
-
-The new device-model needs a different BIOS, SeaBIOS. Clone the repository 
from:
-
-  - [git://git.qemu.org/seabios.git]()
-  - [http://git.qemu.org/git/seabios.git]()
-
-Put the `.config` file in the appendix at the root of `seabios.git`
-and build SeaBIOS by typing `make`.
-
-In the xen-unstable source tree, add the file `.config` with
-`SEABIOS_DIR = /path/to/seabios.git`.
-To build hvmloader with SeaBIOS, you probably need to `make -C tools/firmware
-clean` first and then `make tools`, to use the new SEABIOS_DIR parameter.
-
-
-### QEMU
-
-Get QEMU upstream source from:
-
-  - [git://xenbits.xensource.com/qemu-upstream-unstable.git]()
-  - [http://xenbits.xensource.com/git-http/qemu-upstream-unstable.git]()
-
-To configure QEMU upstream with support for Xen:
-
-    ./configure --enable-xen --target-list=i386-softmmu 
--extra-cflags="-I$path_to_xen_source/tools/include 
-I$path_to_xen_source/tools/libxc -I$path_to_xen_source/tools/xenstore" 
--extra-ldflags="-L$path_to_xen_source/tools/libxc 
-L$path_to_xen_source/tools/xenstore"
-
-You can also use other several options such as `--disable-kvm`.
-
-
-How to use QEMU upstream
-------------------------
-
-Only `xl` supports QEMU upstream.
-
-To actually use it, add or change this in your VM configuration file:
+Otherwise, QEMU/SeaBIOS is now integrated into the build system, so you just
+have to specify the device model version in an `xl` config file:
 
     device_model_version = 'qemu-xen'
-    device_model_override = '/path/to/qemu/i386-softmmu/qemu'
-
-NB: In the `qemu-upstream` repository, the default binary name has been
-renamed to `qemu-system-i386`.
-
-
-Appendix
-------
-
-### `.config` file for SeaBIOS
 
-    #
-    # General Features
-    #
-    # CONFIG_COREBOOT is not set
-    CONFIG_XEN=y
-    CONFIG_THREADS=y
-    CONFIG_THREAD_OPTIONROMS=y
-    CONFIG_RELOCATE_INIT=y
-    CONFIG_BOOTMENU=y
-    CONFIG_BOOTMENU_WAIT=1000
-    # CONFIG_BOOTSPLASH is not set
-    CONFIG_BOOTORDER=y
-    #
-    # Hardware support
-    #
-    CONFIG_ATA=y
-    CONFIG_ATA_DMA=y
-    CONFIG_ATA_PIO32=y
-    CONFIG_AHCI=y
-    CONFIG_VIRTIO_BLK=y
-    CONFIG_FLOPPY=y
-    CONFIG_PS2PORT=y
-    CONFIG_USB=y
-    CONFIG_USB_UHCI=y
-    CONFIG_USB_OHCI=y
-    CONFIG_USB_EHCI=y
-    CONFIG_USB_MSC=y
-    CONFIG_USB_HUB=y
-    CONFIG_USB_KEYBOARD=y
-    CONFIG_USB_MOUSE=y
-    CONFIG_SERIAL=y
-    CONFIG_LPT=y
-    # CONFIG_EXTRA_PCI_ROOTS is not set
-    # CONFIG_USE_SMM is not set
-    CONFIG_MTRR_INIT=y
-    #
-    # BIOS interfaces
-    #
-    CONFIG_DRIVES=y
-    # CONFIG_CDROM_BOOT is not set
-    CONFIG_PCIBIOS=y
-    CONFIG_APMBIOS=y
-    CONFIG_PNPBIOS=y
-    CONFIG_OPTIONROMS=y
-    # CONFIG_OPTIONROMS_DEPLOYED is not set
-    CONFIG_OPTIONROMS_CHECKSUM=y
-    CONFIG_PMM=y
-    CONFIG_BOOT=y
-    CONFIG_KEYBOARD=y
-    CONFIG_KBD_CALL_INT15_4F=y
-    CONFIG_MOUSE=y
-    CONFIG_S3_RESUME=y
-    # CONFIG_S3_RESUME_VGA_INIT is not set
-    # CONFIG_DISABLE_A20 is not set
-    #
-    # BIOS Tables
-    #
-    CONFIG_PIRTABLE=y
-    CONFIG_MPTABLE=y
-    CONFIG_SMBIOS=y
-    CONFIG_ACPI=y
-    #
-    # Debugging
-    #
-    CONFIG_DEBUG_LEVEL=3
-    CONFIG_DEBUG_SERIAL=y
-    CONFIG_DEBUG_SERIAL_PORT=0x3f8
-    # CONFIG_SCREEN_AND_DEBUG is not set
+The version of QEMU used in the build system is the last release of QEMU.
-- 
tg: (5bc03ac..) doc/qemu-upstream (depends on: master)

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel