[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] no-carrier on qlogic 8242 10gig with linux 3.x running xen


  • To: xen-devel@xxxxxxxxxxxxxxxxxxx
  • From: Kristoffer Harthing Egefelt <k@xxxxxxx>
  • Date: Tue, 27 Mar 2012 02:43:34 -0700 (PDT)
  • Delivery-date: Tue, 27 Mar 2012 09:44:06 +0000
  • List-id: Xen developer discussion <xen-devel.lists.xen.org>

Please find dmesg below - do you see any hints?
The onboard 1gig network cards are in fabric A, the 10gig's are in fabric B.
I have disabled the onboard NICs so the 10gigs is eth0 and eth1.
I have tried enabling the onboard NICs, making the 10gig's eth2 and eth3
without luck.

Thanks

oot@node0301:/var/log# cat dmesg.0 
[    0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 3.2.0-2-amd64 (Debian 3.2.9-1)
(debian-kernel@xxxxxxxxxxxxxxxx) (gcc version 4.6.3 (Debian 4.6.3-1) ) #1
SMP Sun Mar 4 22:48:17 UTC 2012
[    0.000000] Command line: placeholder
root=UUID=207d00d6-07a6-40e8-89dd-f0dd8a0cdbd1 ro quiet
[    0.000000] Freeing  a0-100 pfn range: 96 pages freed
[    0.000000] 1-1 mapping on a0->100
[    0.000000] Freeing  cf379-100000 pfn range: 199815 pages freed
[    0.000000] 1-1 mapping on cf379->100000
[    0.000000] Released 199911 pages of unused memory
[    0.000000] Set 199911 page(s) to 1-1 mapping
[    0.000000] BIOS-provided physical RAM map:
[    0.000000]  Xen: 0000000000000000 - 00000000000a0000 (usable)
[    0.000000]  Xen: 00000000000a0000 - 0000000000100000 (reserved)
[    0.000000]  Xen: 0000000000100000 - 00000000cf379000 (usable)
[    0.000000]  Xen: 00000000cf379000 - 00000000cf38f000 (reserved)
[    0.000000]  Xen: 00000000cf38f000 - 00000000cf3ce000 (ACPI data)
[    0.000000]  Xen: 00000000cf3ce000 - 00000000d0000000 (reserved)
[    0.000000]  Xen: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  Xen: 00000000fe000000 - 0000000100000000 (reserved)
[    0.000000]  Xen: 0000000100000000 - 0000000c30000000 (usable)
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] DMI 2.6 present.
[    0.000000] DMI: Dell Inc. PowerEdge M610/0V56FN, BIOS 6.0.7 08/18/2011
[    0.000000] e820 update range: 0000000000000000 - 0000000000010000
(usable) ==> (reserved)
[    0.000000] e820 remove range: 00000000000a0000 - 0000000000100000
(usable)
[    0.000000] No AGP bridge found
[    0.000000] last_pfn = 0xc30000 max_arch_pfn = 0x400000000
[    0.000000] last_pfn = 0xcf379 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [ffff8800000fe710] fe710
[    0.000000] initial memory mapped : 0 - 02017000
[    0.000000] Base memory trampoline at [ffff88000009b000] 9b000 size 20480
[    0.000000] init_memory_mapping: 0000000000000000-00000000cf379000
[    0.000000]  0000000000 - 00cf379000 page 4k
[    0.000000] kernel direct mapping tables up to cf379000 @ 981000-1000000
[    0.000000] xen: setting RW the range fba000 - 1000000
[    0.000000] init_memory_mapping: 0000000100000000-0000000c30000000
[    0.000000]  0100000000 - 0c30000000 page 4k
[    0.000000] kernel direct mapping tables up to c30000000 @
c91c7000-cf379000
[    0.000000] xen: setting RW the range ceb74000 - cf379000
[    0.000000] RAMDISK: 0193b000 - 02017000
[    0.000000] ACPI: RSDP 00000000000f1840 00024 (v02 DELL  )
[    0.000000] ACPI: XSDT 00000000000f1944 0009C (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: FACP 00000000cf3b3f9c 000F4 (v03 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: DSDT 00000000cf38f000 039D9 (v01 DELL   PE_SC3  
00000001 INTL 20050624)
[    0.000000] ACPI: FACS 00000000cf3b6000 00040
[    0.000000] ACPI: APIC 00000000cf3b3478 0015E (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: SPCR 00000000cf3b35d8 00050 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: HPET 00000000cf3b362c 00038 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: XMAR 00000000cf3b3668 001C0 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: MCFG 00000000cf3b38c4 0003C (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: WD__ 00000000cf3b3904 00134 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: SLIC 00000000cf3b3a3c 00024 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: ERST 00000000cf392b5c 00270 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: HEST 00000000cf392dcc 003A8 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: BERT 00000000cf3929dc 00030 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: EINJ 00000000cf392a0c 00150 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: SRAT 00000000cf3b3bc0 00370 (v01 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: TCPA 00000000cf3b3f34 00064 (v02 DELL   PE_SC3  
00000001 DELL 00000001)
[    0.000000] ACPI: SSDT 00000000cf3b7000 065DC (v01  INTEL PPM RCM 
80000001 INTL 20061109)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at 0000000000000000-0000000c30000000
[    0.000000] Initmem setup node 0 0000000000000000-0000000c30000000
[    0.000000]   NODE_DATA [0000000bcf691000 - 0000000bcf695fff]
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA      0x00000010 -> 0x00001000
[    0.000000]   DMA32    0x00001000 -> 0x00100000
[    0.000000]   Normal   0x00100000 -> 0x00c30000
[    0.000000] Movable zone start PFN for each node
[    0.000000] early_node_map[3] active PFN ranges
[    0.000000]     0: 0x00000010 -> 0x000000a0
[    0.000000]     0: 0x00000100 -> 0x000cf379
[    0.000000]     0: 0x00100000 -> 0x00c30000
[    0.000000] On node 0 totalpages: 12579593
[    0.000000]   DMA zone: 56 pages used for memmap
[    0.000000]   DMA zone: 1598 pages reserved
[    0.000000]   DMA zone: 2330 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 14280 pages used for memmap
[    0.000000]   DMA32 zone: 830385 pages, LIFO batch:31
[    0.000000]   Normal zone: 160384 pages used for memmap
[    0.000000]   Normal zone: 11570560 pages, LIFO batch:31
[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x20] enabled)
[    0.000000] BIOS bug: APIC version is 0 for CPU 1/0x20, fixing up to 0x10
[    0.000000] BIOS bug: APIC version mismatch, boot CPU: 0, CPU 1: version
10
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x00] enabled)
[    0.000000] BIOS bug: APIC version is 0 for CPU 0/0x0, fixing up to 0x10
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x22] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x24] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x30] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x32] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x12] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x34] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x14] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x21] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x23] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x11] lapic_id[0x25] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x12] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x13] lapic_id[0x31] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x14] lapic_id[0x11] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x15] lapic_id[0x33] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x16] lapic_id[0x13] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x17] lapic_id[0x35] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x18] lapic_id[0x15] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x19] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1a] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1b] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1c] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1d] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1e] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x1f] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x20] lapic_id[0xff] disabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 0, version 255, address 0xfec00000, GSI
0-255
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec80000] gsi_base[32])
[    0.000000] IOAPIC[1]: apic_id 1, version 255, address 0xfec80000, GSI
32-287
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
[    0.000000] SMP: Allowing 32 CPUs, 8 hotplug CPUs
[    0.000000] nr_irqs_gsi: 304
[    0.000000] PM: Registered nosave memory: 00000000000a0000 -
0000000000100000
[    0.000000] PM: Registered nosave memory: 00000000cf379000 -
00000000cf38f000
[    0.000000] PM: Registered nosave memory: 00000000cf38f000 -
00000000cf3ce000
[    0.000000] PM: Registered nosave memory: 00000000cf3ce000 -
00000000d0000000
[    0.000000] PM: Registered nosave memory: 00000000d0000000 -
00000000e0000000
[    0.000000] PM: Registered nosave memory: 00000000e0000000 -
00000000f0000000
[    0.000000] PM: Registered nosave memory: 00000000f0000000 -
00000000fe000000
[    0.000000] PM: Registered nosave memory: 00000000fe000000 -
0000000100000000
[    0.000000] Allocating PCI resources starting at d0000000 (gap:
d0000000:10000000)
[    0.000000] Booting paravirtualized kernel on Xen
[    0.000000] Xen version: 4.1.2 (preserve-AD)
[    0.000000] setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:32
nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880bcf2be000 s82304 r8192
d24192 u114688
[    0.000000] pcpu-alloc: s82304 r8192 d24192 u114688 alloc=28*4096
[    0.000000] pcpu-alloc: [0] 00 [0] 01 [0] 02 [0] 03 [0] 04 [0] 05 [0] 06
[0] 07 
[    0.000000] pcpu-alloc: [0] 08 [0] 09 [0] 10 [0] 11 [0] 12 [0] 13 [0] 14
[0] 15 
[    0.000000] pcpu-alloc: [0] 16 [0] 17 [0] 18 [0] 19 [0] 20 [0] 21 [0] 22
[0] 23 
[    0.000000] pcpu-alloc: [0] 24 [0] 25 [0] 26 [0] 27 [0] 28 [0] 29 [0] 30
[0] 31 
[    9.437371] Built 1 zonelists in Zone order, mobility grouping on.  Total
pages: 12403275
[    9.437373] Policy zone: Normal
[    9.437376] Kernel command line: placeholder
root=UUID=207d00d6-07a6-40e8-89dd-f0dd8a0cdbd1 ro quiet
[    9.437424] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    9.470012] Placing 64MB software IO TLB between ffff880bcae00000 -
ffff880bcee00000
[    9.470016] software IO TLB at phys 0xbcae00000 - 0xbcee00000
[    9.708326] Memory: 47765528k/51118080k available (3371k kernel code,
799708k absent, 2552844k reserved, 3360k data, 568k init)
[    9.708508] Hierarchical RCU implementation.
[    9.708510]  RCU dyntick-idle grace-period acceleration is enabled.
[    9.708550] NR_IRQS:33024 nr_irqs:5424 16
[    9.708659] xen: sci override: global_irq=9 trigger=0 polarity=0
[    9.708662] xen: registering gsi 9 triggering 0 polarity 0
[    9.708674] xen: --> pirq=9 -> irq=9 (gsi=9)
[    9.708707] xen: acpi sci 9
[    9.708711] xen: --> pirq=1 -> irq=1 (gsi=1)
[    9.708715] xen: --> pirq=2 -> irq=2 (gsi=2)
[    9.708718] xen: --> pirq=3 -> irq=3 (gsi=3)
[    9.708721] xen: --> pirq=4 -> irq=4 (gsi=4)
[    9.708724] xen: --> pirq=5 -> irq=5 (gsi=5)
[    9.708728] xen: --> pirq=6 -> irq=6 (gsi=6)
[    9.708731] xen: --> pirq=7 -> irq=7 (gsi=7)
[    9.708734] xen: --> pirq=8 -> irq=8 (gsi=8)
[    9.708737] xen_map_pirq_gsi: returning irq 9 for gsi 9
[    9.708739] xen: --> pirq=9 -> irq=9 (gsi=9)
[    9.708742] xen: --> pirq=10 -> irq=10 (gsi=10)
[    9.708745] xen: --> pirq=11 -> irq=11 (gsi=11)
[    9.708749] xen: --> pirq=12 -> irq=12 (gsi=12)
[    9.708752] xen: --> pirq=13 -> irq=13 (gsi=13)
[    9.708756] xen: --> pirq=14 -> irq=14 (gsi=14)
[    9.708759] xen: --> pirq=15 -> irq=15 (gsi=15)
[    9.714847] Console: colour VGA+ 80x25
[    9.714873] console [tty0] enabled
[    9.714932] Xen: using vcpuop timer interface
[    9.714938] installing Xen timer for CPU 0
[    9.714963] Detected 2394.050 MHz processor.
[    9.714977] Calibrating delay loop (skipped), value calculated using
timer frequency.. 4788.10 BogoMIPS (lpj=9576200)
[    9.714981] pid_max: default: 32768 minimum: 301
[    9.715038] Security Framework initialized
[    9.715044] AppArmor: AppArmor disabled by boot time parameter
[    9.731180] Dentry cache hash table entries: 8388608 (order: 14, 67108864
bytes)
[    9.754400] Inode-cache hash table entries: 4194304 (order: 13, 33554432
bytes)
[    9.762236] Mount-cache hash table entries: 256
[    9.762443] Initializing cgroup subsys cpuacct
[    9.762451] Initializing cgroup subsys memory
[    9.762476] Initializing cgroup subsys devices
[    9.762479] Initializing cgroup subsys freezer
[    9.762482] Initializing cgroup subsys net_cls
[    9.762484] Initializing cgroup subsys blkio
[    9.762494] Initializing cgroup subsys perf_event
[    9.762569] CPU: Physical Processor ID: 1
[    9.762571] CPU: Processor Core ID: 0
[    9.763087] ACPI: Core revision 20110623
[    9.774492] Performance Events: unsupported p6 CPU model 44 no PMU
driver, software events only.
[    9.774695] NMI watchdog disabled (cpu0): hardware events not enabled
[    9.774835] installing Xen timer for CPU 1
[    9.775022] NMI watchdog disabled (cpu1): hardware events not enabled
[    9.775154] installing Xen timer for CPU 2
[    9.775277] NMI watchdog disabled (cpu2): hardware events not enabled
[    9.775405] installing Xen timer for CPU 3
[    9.775521] NMI watchdog disabled (cpu3): hardware events not enabled
[    9.775651] installing Xen timer for CPU 4
[    9.775773] NMI watchdog disabled (cpu4): hardware events not enabled
[    9.775898] installing Xen timer for CPU 5
[    9.776016] NMI watchdog disabled (cpu5): hardware events not enabled
[    9.776145] installing Xen timer for CPU 6
[    9.776267] NMI watchdog disabled (cpu6): hardware events not enabled
[    9.776393] installing Xen timer for CPU 7
[    9.776511] NMI watchdog disabled (cpu7): hardware events not enabled
[    9.776638] installing Xen timer for CPU 8
[    9.776760] NMI watchdog disabled (cpu8): hardware events not enabled
[    9.776889] installing Xen timer for CPU 9
[    9.777009] NMI watchdog disabled (cpu9): hardware events not enabled
[    9.777136] installing Xen timer for CPU 10
[    9.777259] NMI watchdog disabled (cpu10): hardware events not enabled
[    9.777390] installing Xen timer for CPU 11
[    9.777507] NMI watchdog disabled (cpu11): hardware events not enabled
[    9.777644] installing Xen timer for CPU 12
[    9.777826] NMI watchdog disabled (cpu12): hardware events not enabled
[    9.777960] installing Xen timer for CPU 13
[    9.778111] NMI watchdog disabled (cpu13): hardware events not enabled
[    9.778243] installing Xen timer for CPU 14
[    9.778400] NMI watchdog disabled (cpu14): hardware events not enabled
[    9.778535] installing Xen timer for CPU 15
[    9.778686] NMI watchdog disabled (cpu15): hardware events not enabled
[    9.778815] installing Xen timer for CPU 16
[    9.778977] NMI watchdog disabled (cpu16): hardware events not enabled
[    9.779107] installing Xen timer for CPU 17
[    9.779260] NMI watchdog disabled (cpu17): hardware events not enabled
[    9.779394] installing Xen timer for CPU 18
[    9.779554] NMI watchdog disabled (cpu18): hardware events not enabled
[    9.779683] installing Xen timer for CPU 19
[    9.779837] NMI watchdog disabled (cpu19): hardware events not enabled
[    9.779969] installing Xen timer for CPU 20
[    9.780127] NMI watchdog disabled (cpu20): hardware events not enabled
[    9.780256] installing Xen timer for CPU 21
[    9.780408] NMI watchdog disabled (cpu21): hardware events not enabled
[    9.780540] installing Xen timer for CPU 22
[    9.780699] NMI watchdog disabled (cpu22): hardware events not enabled
[    9.780828] installing Xen timer for CPU 23
[    9.780982] NMI watchdog disabled (cpu23): hardware events not enabled
[    9.781006] Brought up 24 CPUs
[    9.781867] devtmpfs: initialized
[    9.789356] Grant table initialized
[    9.789440] print_constraints: dummy: 
[    9.789642] NET: Registered protocol family 16
[    9.789890] ACPI FADT declares the system doesn't support PCIe ASPM, so
disable it
[    9.789893] ACPI: bus type pci registered
[    9.790011] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem
0xe0000000-0xefffffff] (base 0xe0000000)
[    9.790015] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    9.850148] PCI: Using configuration type 1 for base access
[    9.853088] bio: create slab <bio-0> at 0
[    9.853502] ACPI: Added _OSI(Module Device)
[    9.853506] ACPI: Added _OSI(Processor Device)
[    9.853509] ACPI: Added _OSI(3.0 _SCP Extensions)
[    9.853511] ACPI: Added _OSI(Processor Aggregator Device)
[    9.854952] ACPI: EC: Look up EC in DSDT
[    9.857408] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    9.865597] ACPI: Interpreter enabled
[    9.865602] ACPI: (supports S0 S4 S5)
[    9.865618] ACPI: Using IOAPIC for interrupt routing
[    9.871351] ACPI: No dock devices found.
[    9.871638] HEST: Table parsing has been initialized.
[    9.871642] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[    9.872209] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[    9.872677] pci_root PNP0A08:00: host bridge window [io  0x0000-0x0cf7]
[    9.872680] pci_root PNP0A08:00: host bridge window [io  0x0d00-0xffff]
[    9.872683] pci_root PNP0A08:00: host bridge window [mem
0x000a0000-0x000bffff]
[    9.872685] pci_root PNP0A08:00: host bridge window [mem
0xd0000000-0xfdffffff]
[    9.872688] pci_root PNP0A08:00: host bridge window [mem
0xfed40000-0xfed44fff]
[    9.872715] pci 0000:00:00.0: [8086:3403] type 0 class 0x000600
[    9.872829] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
[    9.872835] pci 0000:00:00.0: PME# disabled
[    9.872881] pci 0000:00:01.0: [8086:3408] type 1 class 0x000604
[    9.873000] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[    9.873006] pci 0000:00:01.0: PME# disabled
[    9.873058] pci 0000:00:07.0: [8086:340e] type 1 class 0x000604
[    9.873179] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
[    9.873184] pci 0000:00:07.0: PME# disabled
[    9.873231] pci 0000:00:09.0: [8086:3410] type 1 class 0x000604
[    9.873351] pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
[    9.873357] pci 0000:00:09.0: PME# disabled
[    9.873409] pci 0000:00:14.0: [8086:342e] type 0 class 0x000800
[    9.873550] pci 0000:00:14.1: [8086:3422] type 0 class 0x000800
[    9.873689] pci 0000:00:14.2: [8086:3423] type 0 class 0x000800
[    9.873854] pci 0000:00:1a.0: [8086:2937] type 0 class 0x000c03
[    9.873932] pci 0000:00:1a.0: reg 20: [io  0xe8c0-0xe8df]
[    9.874026] pci 0000:00:1a.1: [8086:2938] type 0 class 0x000c03
[    9.874104] pci 0000:00:1a.1: reg 20: [io  0xe8e0-0xe8ff]
[    9.874215] pci 0000:00:1a.7: [8086:293c] type 0 class 0x000c03
[    9.874251] pci 0000:00:1a.7: reg 10: [mem 0xdffff800-0xdffffbff]
[    9.874410] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[    9.874417] pci 0000:00:1a.7: PME# disabled
[    9.874454] pci 0000:00:1c.0: [8086:2940] type 1 class 0x000604
[    9.874589] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    9.874594] pci 0000:00:1c.0: PME# disabled
[    9.874646] pci 0000:00:1d.0: [8086:2934] type 0 class 0x000c03
[    9.874724] pci 0000:00:1d.0: reg 20: [io  0xec00-0xec1f]
[    9.874818] pci 0000:00:1d.1: [8086:2935] type 0 class 0x000c03
[    9.874897] pci 0000:00:1d.1: reg 20: [io  0xec20-0xec3f]
[    9.874990] pci 0000:00:1d.2: [8086:2936] type 0 class 0x000c03
[    9.875068] pci 0000:00:1d.2: reg 20: [io  0xec40-0xec5f]
[    9.875178] pci 0000:00:1d.7: [8086:293a] type 0 class 0x000c03
[    9.875214] pci 0000:00:1d.7: reg 10: [mem 0xdffffc00-0xdfffffff]
[    9.875373] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[    9.875380] pci 0000:00:1d.7: PME# disabled
[    9.875414] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
[    9.875532] pci 0000:00:1f.0: [8086:2918] type 0 class 0x000601
[    9.875666] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0c00
(mask 007f)
[    9.875670] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at 0ca0
(mask 000f)
[    9.875675] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 00e0
(mask 000f)
[    9.875758] pci 0000:00:1f.5: [8086:2926] type 0 class 0x000101
[    9.875787] pci 0000:00:1f.5: reg 10: [io  0xece0-0xece7]
[    9.875801] pci 0000:00:1f.5: reg 14: [io  0xecf8-0xecfb]
[    9.875815] pci 0000:00:1f.5: reg 18: [io  0xece8-0xecef]
[    9.875830] pci 0000:00:1f.5: reg 1c: [io  0xecfc-0xecff]
[    9.875844] pci 0000:00:1f.5: reg 20: [io  0xecb0-0xecbf]
[    9.875859] pci 0000:00:1f.5: reg 24: [io  0xecc0-0xeccf]
[    9.876012] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    9.876127] pci 0000:03:00.0: [1077:8020] type 0 class 0x000200
[    9.876153] pci 0000:03:00.0: reg 10: [mem 0xdf800000-0xdf9fffff 64bit]
[    9.876198] pci 0000:03:00.0: reg 20: [mem 0xdfde0000-0xdfdeffff 64bit]
[    9.876213] pci 0000:03:00.0: reg 30: [mem 0xdfd80000-0xdfdbffff pref]
[    9.876297] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[    9.876303] pci 0000:03:00.0: PME# disabled
[    9.876353] pci 0000:03:00.1: [1077:8020] type 0 class 0x000200
[    9.876379] pci 0000:03:00.1: reg 10: [mem 0xdfa00000-0xdfbfffff 64bit]
[    9.876424] pci 0000:03:00.1: reg 20: [mem 0xdfdf0000-0xdfdfffff 64bit]
[    9.876439] pci 0000:03:00.1: reg 30: [mem 0xdfd80000-0xdfdbffff pref]
[    9.876523] pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
[    9.876529] pci 0000:03:00.1: PME# disabled
[    9.881935] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[    9.881948] pci 0000:00:07.0:   bridge window [mem 0xdf800000-0xdfdfffff]
[    9.882041] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[    9.882152] pci 0000:02:00.0: [1000:0079] type 0 class 0x000104
[    9.882176] pci 0000:02:00.0: reg 10: [io  0xfc00-0xfcff]
[    9.882202] pci 0000:02:00.0: reg 14: [mem 0xdfefc000-0xdfefffff 64bit]
[    9.882229] pci 0000:02:00.0: reg 1c: [mem 0xdfe40000-0xdfe7ffff 64bit]
[    9.882262] pci 0000:02:00.0: reg 30: [mem 0xdfe80000-0xdfebffff pref]
[    9.882368] pci 0000:02:00.0: supports D1 D2
[    9.890028] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    9.890038] pci 0000:00:1c.0:   bridge window [io  0xf000-0xffff]
[    9.890046] pci 0000:00:1c.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    9.890133] pci 0000:05:03.0: [102b:0532] type 0 class 0x000300
[    9.890162] pci 0000:05:03.0: reg 10: [mem 0xde000000-0xde7fffff pref]
[    9.890178] pci 0000:05:03.0: reg 14: [mem 0xdf7fc000-0xdf7fffff]
[    9.890194] pci 0000:05:03.0: reg 18: [mem 0xde800000-0xdeffffff]
[    9.890251] pci 0000:05:03.0: reg 30: [mem 0x00000000-0x0000ffff pref]
[    9.890364] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive
decode)
[    9.890374] pci 0000:00:1e.0:   bridge window [mem 0xde800000-0xdf7fffff]
[    9.890383] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xde7fffff
64bit pref]
[    9.890387] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7]
(subtractive decode)
[    9.890390] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff]
(subtractive decode)
[    9.890393] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff]
(subtractive decode)
[    9.890396] pci 0000:00:1e.0:   bridge window [mem 0xd0000000-0xfdffffff]
(subtractive decode)
[    9.890399] pci 0000:00:1e.0:   bridge window [mem 0xfed40000-0xfed44fff]
(subtractive decode)
[    9.890440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    9.891385] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[    9.891559] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX7._PRT]
[    9.891725] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX9._PRT]
[    9.891887] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SBEX._PRT]
[    9.892044] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.COMP._PRT]
[    9.892454]  pci0000:00: Requesting ACPI _OSC control (0x15)
[    9.893138]  pci0000:00: ACPI _OSC control (0x15) granted
[    9.898687] ACPI: PCI Interrupt Link [LK00] (IRQs 3 4 5 6 7 10 11 14 *15)
[    9.898815] ACPI: PCI Interrupt Link [LK01] (IRQs 3 4 5 6 7 10 11 *14 15)
[    9.898943] ACPI: PCI Interrupt Link [LK02] (IRQs 3 4 5 6 7 10 *11 14 15)
[    9.899066] ACPI: PCI Interrupt Link [LK03] (IRQs 3 4 5 6 7 *10 11 14 15)
[    9.899188] ACPI: PCI Interrupt Link [LK04] (IRQs 3 4 *5 6 7 10 11 14 15)
[    9.899311] ACPI: PCI Interrupt Link [LK05] (IRQs 3 4 5 *6 7 10 11 14 15)
[    9.899433] ACPI: PCI Interrupt Link [LK06] (IRQs 3 4 5 6 7 10 11 14 15)
*0, disabled.
[    9.899557] ACPI: PCI Interrupt Link [LK07] (IRQs 3 *4 5 6 7 10 11 14 15)
[    9.899623] xen/balloon: Initialising balloon driver.
[    9.907655] xen-balloon: Initialising balloon driver.
[    9.907830] vgaarb: device added:
PCI:0000:05:03.0,decodes=io+mem,owns=io+mem,locks=none
[    9.907833] vgaarb: loaded
[    9.907835] vgaarb: bridge control possible 0000:05:03.0
[    9.907884] PCI: Using ACPI for IRQ routing
[    9.919996] PCI: Discovered peer bus fe
[    9.920065] pci 0000:fe:00.0: [8086:2c70] type 0 class 0x000600
[    9.920129] pci 0000:fe:00.1: [8086:2d81] type 0 class 0x000600
[    9.920194] pci 0000:fe:02.0: [8086:2d90] type 0 class 0x000600
[    9.920251] pci 0000:fe:02.1: [8086:2d91] type 0 class 0x000600
[    9.920307] pci 0000:fe:02.2: [8086:2d92] type 0 class 0x000600
[    9.920363] pci 0000:fe:02.3: [8086:2d93] type 0 class 0x000600
[    9.920420] pci 0000:fe:02.4: [8086:2d94] type 0 class 0x000600
[    9.920476] pci 0000:fe:02.5: [8086:2d95] type 0 class 0x000600
[    9.920535] pci 0000:fe:03.0: [8086:2d98] type 0 class 0x000600
[    9.920591] pci 0000:fe:03.1: [8086:2d99] type 0 class 0x000600
[    9.920647] pci 0000:fe:03.2: [8086:2d9a] type 0 class 0x000600
[    9.920705] pci 0000:fe:03.4: [8086:2d9c] type 0 class 0x000600
[    9.920765] pci 0000:fe:04.0: [8086:2da0] type 0 class 0x000600
[    9.920821] pci 0000:fe:04.1: [8086:2da1] type 0 class 0x000600
[    9.920877] pci 0000:fe:04.2: [8086:2da2] type 0 class 0x000600
[    9.920933] pci 0000:fe:04.3: [8086:2da3] type 0 class 0x000600
[    9.920995] pci 0000:fe:05.0: [8086:2da8] type 0 class 0x000600
[    9.921051] pci 0000:fe:05.1: [8086:2da9] type 0 class 0x000600
[    9.921107] pci 0000:fe:05.2: [8086:2daa] type 0 class 0x000600
[    9.921166] pci 0000:fe:05.3: [8086:2dab] type 0 class 0x000600
[    9.921232] pci 0000:fe:06.0: [8086:2db0] type 0 class 0x000600
[    9.921289] pci 0000:fe:06.1: [8086:2db1] type 0 class 0x000600
[    9.921345] pci 0000:fe:06.2: [8086:2db2] type 0 class 0x000600
[    9.921401] pci 0000:fe:06.3: [8086:2db3] type 0 class 0x000600
[    9.922214] PCI: Discovered peer bus ff
[    9.922260] pci 0000:ff:00.0: [8086:2c70] type 0 class 0x000600
[    9.922320] pci 0000:ff:00.1: [8086:2d81] type 0 class 0x000600
[    9.922388] pci 0000:ff:02.0: [8086:2d90] type 0 class 0x000600
[    9.922447] pci 0000:ff:02.1: [8086:2d91] type 0 class 0x000600
[    9.922506] pci 0000:ff:02.2: [8086:2d92] type 0 class 0x000600
[    9.922564] pci 0000:ff:02.3: [8086:2d93] type 0 class 0x000600
[    9.922623] pci 0000:ff:02.4: [8086:2d94] type 0 class 0x000600
[    9.922682] pci 0000:ff:02.5: [8086:2d95] type 0 class 0x000600
[    9.922743] pci 0000:ff:03.0: [8086:2d98] type 0 class 0x000600
[    9.922802] pci 0000:ff:03.1: [8086:2d99] type 0 class 0x000600
[    9.922860] pci 0000:ff:03.2: [8086:2d9a] type 0 class 0x000600
[    9.922920] pci 0000:ff:03.4: [8086:2d9c] type 0 class 0x000600
[    9.922983] pci 0000:ff:04.0: [8086:2da0] type 0 class 0x000600
[    9.923042] pci 0000:ff:04.1: [8086:2da1] type 0 class 0x000600
[    9.923100] pci 0000:ff:04.2: [8086:2da2] type 0 class 0x000600
[    9.923159] pci 0000:ff:04.3: [8086:2da3] type 0 class 0x000600
[    9.923223] pci 0000:ff:05.0: [8086:2da8] type 0 class 0x000600
[    9.923282] pci 0000:ff:05.1: [8086:2da9] type 0 class 0x000600
[    9.923341] pci 0000:ff:05.2: [8086:2daa] type 0 class 0x000600
[    9.923399] pci 0000:ff:05.3: [8086:2dab] type 0 class 0x000600
[    9.923465] pci 0000:ff:06.0: [8086:2db0] type 0 class 0x000600
[    9.923524] pci 0000:ff:06.1: [8086:2db1] type 0 class 0x000600
[    9.923582] pci 0000:ff:06.2: [8086:2db2] type 0 class 0x000600
[    9.923643] pci 0000:ff:06.3: [8086:2db3] type 0 class 0x000600
[    9.924469] PCI: pci_cache_line_size set to 64 bytes
[    9.924766] reserve RAM buffer: 00000000cf379000 - 00000000cfffffff 
[    9.924963] Switching to clocksource xen
[    9.927723] pnp: PnP ACPI init
[    9.927740] ACPI: bus type pnp registered
[    9.928034] pnp 00:00: [bus 00-ff]
[    9.928037] pnp 00:00: [io  0x0cf8-0x0cff]
[    9.928040] pnp 00:00: [io  0x0000-0x0cf7 window]
[    9.928044] pnp 00:00: [io  0x0d00-0xffff window]
[    9.928047] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[    9.928050] pnp 00:00: [mem 0xd0000000-0xfdffffff window]
[    9.928052] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[    9.928144] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03
(active)
[    9.928236] pnp 00:01: [io  0x0080-0x009f]
[    9.928239] pnp 00:01: [io  0x0000-0x001f]
[    9.928242] pnp 00:01: [io  0x00c0-0x00df]
[    9.928244] pnp 00:01: [dma 4]
[    9.928287] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[    9.928328] pnp 00:02: [io  0x00f0-0x00ff]
[    9.928332] xen: registering gsi 13 triggering 1 polarity 0
[    9.928338] xen_map_pirq_gsi: returning irq 13 for gsi 13
[    9.928341] xen: --> pirq=13 -> irq=13 (gsi=13)
[    9.928374] pnp 00:02: [irq 13]
[    9.928418] pnp 00:02: Plug and Play ACPI device, IDs PNP0c04 (active)
[    9.928461] pnp 00:03: [io  0x0061]
[    9.928554] system 00:03: Plug and Play ACPI device, IDs PNP0c01 (active)
[    9.928596] pnp 00:04: [io  0x0070-0x007f]
[    9.928599] xen: registering gsi 8 triggering 1 polarity 0
[    9.928602] xen_map_pirq_gsi: returning irq 8 for gsi 8
[    9.928604] xen: --> pirq=8 -> irq=8 (gsi=8)
[    9.928634] pnp 00:04: [irq 8]
[    9.928676] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[    9.928913] pnp 00:05: Plug and Play ACPI device, IDs PNP0501 (disabled)
[    9.929754] pnp 00:06: [io  0x0800-0x087f]
[    9.929757] pnp 00:06: [io  0x00e0-0x00e7]
[    9.929759] pnp 00:06: [io  0x0880-0x08ff]
[    9.929762] pnp 00:06: [io  0x0900-0x091f]
[    9.929764] pnp 00:06: [io  0x0920-0x0923]
[    9.929767] pnp 00:06: [io  0x0924]
[    9.929769] pnp 00:06: [io  0x0ca0-0x0ca7]
[    9.929773] pnp 00:06: [io  0x0ca9-0x0cab]
[    9.929775] pnp 00:06: [io  0x0cad-0x0caf]
[    9.929778] pnp 00:06: [io  0x0060-0x005f disabled]
[    9.929781] pnp 00:06: [io  0x0064-0x0063 disabled]
[    9.929882] system 00:06: [io  0x0800-0x087f] has been reserved
[    9.929885] system 00:06: [io  0x0880-0x08ff] has been reserved
[    9.929888] system 00:06: [io  0x0900-0x091f] has been reserved
[    9.929892] system 00:06: [io  0x0920-0x0923] has been reserved
[    9.929895] system 00:06: [io  0x0924] has been reserved
[    9.929898] system 00:06: [io  0x0ca0-0x0ca7] has been reserved
[    9.929901] system 00:06: [io  0x0ca9-0x0cab] has been reserved
[    9.929904] system 00:06: [io  0x0cad-0x0caf] has been reserved
[    9.929908] system 00:06: Plug and Play ACPI device, IDs PNP0c01 (active)
[    9.930002] pnp 00:07: [io  0x0ca8]
[    9.930004] pnp 00:07: [io  0x0cac]
[    9.930007] pnp 00:07: [irq 0 disabled]
[    9.930098] system 00:07: [io  0x0ca8] has been reserved
[    9.930102] system 00:07: [io  0x0cac] has been reserved
[    9.930105] system 00:07: Plug and Play ACPI device, IDs IPI0001 PNP0c01
(active)
[    9.931369] pnp 00:08: [mem 0xe0000000-0xefffffff]
[    9.931473] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[    9.931477] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    9.931578] pnp 00:09: [mem 0xfed00000-0xfed003ff]
[    9.931625] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
[    9.931652] pnp 00:0a: [mem 0xfed90000-0xfed91fff]
[    9.931745] system 00:0a: [mem 0xfed90000-0xfed91fff] has been reserved
[    9.931749] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    9.932093] pnp: PnP ACPI: found 11 devices
[    9.932095] ACPI: ACPI bus type pnp unregistered
[    9.939973] PM-Timer failed consistency check  (0x0xffffff) - aborting.
[    9.939990] pci 0000:03:00.1: address space collision: [mem
0xdfd80000-0xdfdbffff pref] conflicts with 0000:03:00.0 [mem
0xdfd80000-0xdfdbffff pref]
[    9.940022] PCI: max bus depth: 1 pci_try_num: 2
[    9.940090] pci 0000:00:07.0: BAR 15: assigned [mem 0xd0000000-0xd00fffff
pref]
[    9.940094] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[    9.940111] pci 0000:03:00.1: BAR 6: assigned [mem 0xd0000000-0xd003ffff
pref]
[    9.940114] pci 0000:00:07.0: PCI bridge to [bus 03-03]
[    9.940121] pci 0000:00:07.0:   bridge window [mem 0xdf800000-0xdfdfffff]
[    9.940127] pci 0000:00:07.0:   bridge window [mem 0xd0000000-0xd00fffff
pref]
[    9.940136] pci 0000:00:09.0: PCI bridge to [bus 04-04]
[    9.940152] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[    9.940156] pci 0000:00:1c.0:   bridge window [io  0xf000-0xffff]
[    9.940164] pci 0000:00:1c.0:   bridge window [mem 0xdfe00000-0xdfefffff]
[    9.940178] pci 0000:05:03.0: BAR 6: assigned [mem 0xdf000000-0xdf00ffff
pref]
[    9.940180] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
[    9.940188] pci 0000:00:1e.0:   bridge window [mem 0xde800000-0xdf7fffff]
[    9.940194] pci 0000:00:1e.0:   bridge window [mem 0xde000000-0xde7fffff
64bit pref]
[    9.940212] xen: registering gsi 53 triggering 0 polarity 1
[    9.940233] xen: --> pirq=53 -> irq=53 (gsi=53)
[    9.940264] pci 0000:00:01.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    9.940271] pci 0000:00:01.0: setting latency timer to 64
[    9.940280] xen: registering gsi 53 triggering 0 polarity 1
[    9.940283] xen_map_pirq_gsi: returning irq 53 for gsi 53
[    9.940285] xen: --> pirq=53 -> irq=53 (gsi=53)
[    9.940287] Already setup the GSI :53
[    9.940289] pci 0000:00:07.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    9.940295] pci 0000:00:07.0: setting latency timer to 64
[    9.940303] xen: registering gsi 53 triggering 0 polarity 1
[    9.940306] xen_map_pirq_gsi: returning irq 53 for gsi 53
[    9.940308] xen: --> pirq=53 -> irq=53 (gsi=53)
[    9.940310] Already setup the GSI :53
[    9.940312] pci 0000:00:09.0: PCI INT A -> GSI 53 (level, low) -> IRQ 53
[    9.940318] pci 0000:00:09.0: setting latency timer to 64
[    9.940327] xen: registering gsi 16 triggering 0 polarity 1
[    9.940339] xen: --> pirq=16 -> irq=16 (gsi=16)
[    9.940367] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    9.940373] pci 0000:00:1c.0: setting latency timer to 64
[    9.940384] pci 0000:00:1e.0: setting latency timer to 64
[    9.940390] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    9.940392] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    9.940395] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    9.940397] pci_bus 0000:00: resource 7 [mem 0xd0000000-0xfdffffff]
[    9.940400] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
[    9.940403] pci_bus 0000:03: resource 1 [mem 0xdf800000-0xdfdfffff]
[    9.940405] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xd00fffff pref]
[    9.940408] pci_bus 0000:02: resource 0 [io  0xf000-0xffff]
[    9.940410] pci_bus 0000:02: resource 1 [mem 0xdfe00000-0xdfefffff]
[    9.940413] pci_bus 0000:05: resource 1 [mem 0xde800000-0xdf7fffff]
[    9.940416] pci_bus 0000:05: resource 2 [mem 0xde000000-0xde7fffff 64bit
pref]
[    9.940418] pci_bus 0000:05: resource 4 [io  0x0000-0x0cf7]
[    9.940421] pci_bus 0000:05: resource 5 [io  0x0d00-0xffff]
[    9.940423] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
[    9.940426] pci_bus 0000:05: resource 7 [mem 0xd0000000-0xfdffffff]
[    9.940428] pci_bus 0000:05: resource 8 [mem 0xfed40000-0xfed44fff]
[    9.940430] pci_bus 0000:fe: resource 0 [io  0x0000-0xffff]
[    9.940433] pci_bus 0000:fe: resource 1 [mem 0x00000000-0xffffffffff]
[    9.940436] pci_bus 0000:ff: resource 0 [io  0x0000-0xffff]
[    9.940438] pci_bus 0000:ff: resource 1 [mem 0x00000000-0xffffffffff]
[    9.940731] NET: Registered protocol family 2
[    9.941979] IP route cache hash table entries: 524288 (order: 10, 4194304
bytes)
[    9.945109] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[    9.947245] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    9.947498] TCP: Hash tables configured (established 524288 bind 65536)
[    9.947501] TCP reno registered
[    9.947762] UDP hash table entries: 32768 (order: 8, 1048576 bytes)
[    9.948303] UDP-Lite hash table entries: 32768 (order: 8, 1048576 bytes)
[    9.948922] NET: Registered protocol family 1
[    9.948973] xen: registering gsi 17 triggering 0 polarity 1
[    9.948999] xen: --> pirq=17 -> irq=17 (gsi=17)
[    9.949034] pci 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    9.949060] pci 0000:00:1a.0: PCI INT A disabled
[    9.949069] xen: registering gsi 18 triggering 0 polarity 1
[    9.949077] xen: --> pirq=18 -> irq=18 (gsi=18)
[    9.949121] pci 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
[    9.949145] pci 0000:00:1a.1: PCI INT B disabled
[    9.949155] xen: registering gsi 19 triggering 0 polarity 1
[    9.949164] xen: --> pirq=19 -> irq=19 (gsi=19)
[    9.949193] pci 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) -> IRQ 19
[    9.965133] pci 0000:00:1a.7: PCI INT C disabled
[    9.965152] xen: registering gsi 21 triggering 0 polarity 1
[    9.965174] xen: --> pirq=21 -> irq=21 (gsi=21)
[    9.965203] pci 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    9.965228] pci 0000:00:1d.0: PCI INT A disabled
[    9.965237] xen: registering gsi 20 triggering 0 polarity 1
[    9.965245] xen: --> pirq=20 -> irq=20 (gsi=20)
[    9.965273] pci 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[    9.965298] pci 0000:00:1d.1: PCI INT B disabled
[    9.965306] xen: registering gsi 21 triggering 0 polarity 1
[    9.965310] xen_map_pirq_gsi: returning irq 21 for gsi 21
[    9.965312] xen: --> pirq=21 -> irq=21 (gsi=21)
[    9.965313] Already setup the GSI :21
[    9.965316] pci 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) -> IRQ 21
[    9.965340] pci 0000:00:1d.2: PCI INT C disabled
[    9.965350] xen: registering gsi 21 triggering 0 polarity 1
[    9.965353] xen_map_pirq_gsi: returning irq 21 for gsi 21
[    9.965355] xen: --> pirq=21 -> irq=21 (gsi=21)
[    9.965357] Already setup the GSI :21
[    9.965360] pci 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) -> IRQ 21
[    9.965428] pci 0000:00:1d.7: PCI INT A disabled
[    9.965460] pci 0000:05:03.0: Boot video device
[    9.965589] PCI: CLS 64 bytes, default 64
[    9.965654] Unpacking initramfs...
[    9.973773] Freeing initrd memory: 7024k freed
[    9.977353] audit: initializing netlink socket (disabled)
[    9.977372] type=2000 audit(1332837366.954:1): initialized
[   10.085691] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[   10.086520] VFS: Disk quotas dquot_6.5.2
[   10.086605] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[   10.086754] msgmni has been set to 32768
[   10.087049] alg: No test for stdrng (krng)
[   10.087130] Block layer SCSI generic (bsg) driver version 0.4 loaded
(major 253)
[   10.087134] io scheduler noop registered
[   10.087137] io scheduler deadline registered
[   10.087230] io scheduler cfq registered (default)
[   10.087524] pcieport 0000:00:01.0: setting latency timer to 64
[   10.087747] pcieport 0000:00:07.0: setting latency timer to 64
[   10.087931] pcieport 0000:00:09.0: setting latency timer to 64
[   10.088112] pcieport 0000:00:1c.0: setting latency timer to 64
[   10.088384] pcieport 0000:00:01.0: Signaling PME through PCIe PME
interrupt
[   10.088391] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[   10.088434] pcieport 0000:00:07.0: Signaling PME through PCIe PME
interrupt
[   10.088437] pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
[   10.088440] pci 0000:03:00.1: Signaling PME through PCIe PME interrupt
[   10.088446] pcie_pme 0000:00:07.0:pcie01: service driver pcie_pme loaded
[   10.088488] pcieport 0000:00:09.0: Signaling PME through PCIe PME
interrupt
[   10.088495] pcie_pme 0000:00:09.0:pcie01: service driver pcie_pme loaded
[   10.088536] pcieport 0000:00:1c.0: Signaling PME through PCIe PME
interrupt
[   10.088539] pci 0000:02:00.0: Signaling PME through PCIe PME interrupt
[   10.088546] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[   10.088889] ERST: Error Record Serialization Table (ERST) support is
initialized.
[   10.089314] GHES: APEI firmware first mode is enabled by APEI bit and
WHEA _OSC.
[   10.089794] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[   10.281389] serial 00:05: [io  0x03f8-0x03ff]
[   10.281682] serial 00:05: [irq 4]
[   10.282732] serial 00:05: activated
[   10.303488] 00:05: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[   10.345589] hpet_acpi_add: no address or irqs in _CRS
[   10.345610] Linux agpgart interface v0.103
[   10.346005] i8042: PNP: No PS/2 controller found. Probing ports directly.
[   10.346899] i8042: No controller found
[   10.347135] mousedev: PS/2 mouse device common for all mice
[   10.347209] rtc_cmos 00:04: RTC can wake from S4
[   10.347419] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[   10.347505] rtc0: alarms up to one day, y3k, 242 bytes nvram
[   10.347888] TCP cubic registered
[   10.348243] NET: Registered protocol family 10
[   10.349231] Mobile IPv6
[   10.349236] NET: Registered protocol family 17
[   10.349244] Registering the dns_resolver key type
[   10.349528] PM: Hibernation image not present or could not be loaded.
[   10.349544] registered taskstats version 1
[   10.350564] rtc_cmos 00:04: setting system clock to 2012-03-27 08:36:06
UTC (1332837366)
[   10.350629] Initializing network drop monitor service
[   10.351155] Freeing unused kernel memory: 568k freed
[   10.351327] Write protecting the kernel read-only data: 6144k
[   10.355543] Freeing unused kernel memory: 708k freed
[   10.356179] Freeing unused kernel memory: 684k freed
[   10.399054] udevd[137]: starting version 175
[   10.459886] SCSI subsystem initialized
[   10.463090] megasas: 00.00.06.12-rc1 Wed. Oct. 5 17:00:00 PDT 2011
[   10.463140] megasas: 0x1000:0x0079:0x1028:0x1f18: bus 2:slot 0:func 0
[   10.463176] xen: registering gsi 16 triggering 0 polarity 1
[   10.463192] xen_map_pirq_gsi: returning irq 16 for gsi 16
[   10.463200] xen: --> pirq=16 -> irq=16 (gsi=16)
[   10.463208] Already setup the GSI :16
[   10.463217] megaraid_sas 0000:02:00.0: PCI INT A -> GSI 16 (level, low)
-> IRQ 16
[   10.463237] megaraid_sas 0000:02:00.0: setting latency timer to 64
[   10.463521] megasas: FW now in Ready state
[   10.493120] megasas_init_mfi: fw_support_ieee=67108864
[   10.493124] megasas: INIT adapter done
[   10.565189] scsi0 : LSI SAS based MegaRAID driver
[   10.566278] scsi 0:0:0:0: Direct-Access     SEAGATE  ST9600205SS     
CS05 PQ: 0 ANSI: 5
[   10.566872] scsi 0:0:1:0: Direct-Access     SEAGATE  ST9600205SS     
CS05 PQ: 0 ANSI: 5
[   10.621790] scsi 0:0:32:0: Enclosure         DP       BACKPLANE       
1.07 PQ: 0 ANSI: 5
[   10.645346] scsi 0:2:0:0: Direct-Access     DELL     PERC H700       
2.10 PQ: 0 ANSI: 5
[   10.673255] sd 0:2:0:0: [sda] 1170997248 512-byte logical blocks: (599
GB/558 GiB)
[   10.673377] sd 0:2:0:0: [sda] Write Protect is off
[   10.673382] sd 0:2:0:0: [sda] Mode Sense: 1f 00 00 08
[   10.673460] sd 0:2:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[   10.674583]  sda: sda1 sda2 sda3
[   10.675266] sd 0:2:0:0: [sda] Attached SCSI disk
[   11.001691] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   11.002597] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   11.021365] device-mapper: uevent: version 1.0.3
[   11.021562] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised:
dm-devel@xxxxxxxxxx
[   11.237755] PM: Starting manual resume from disk
[   11.237761] PM: Hibernation image partition 8:2 present
[   11.237764] PM: Looking for hibernation image.
[   11.237953] PM: Image not found (code -22)
[   11.237956] PM: Hibernation image not present or could not be loaded.
[   11.254893] EXT4-fs (sda1): INFO: recovery required on readonly
filesystem
[   11.254898] EXT4-fs (sda1): write access will be enabled during recovery
[   11.280435] EXT4-fs (sda1): recovery complete
[   11.280594] EXT4-fs (sda1): mounted filesystem with ordered data mode.
Opts: (null)
[   12.225576] udevd[386]: starting version 175
[   12.502908] ACPI Error: No handler for Region [IPMI] (ffff880b9a0c6420)
[IPMI] (20110623/evregion-373)
[   12.502923] ACPI Error: Region IPMI (ID=7) has no handler
(20110623/exfldio-292)
[   12.502938] ACPI Error: Method parse/execution failed [\_SB_.PMI0._GHL]
(Node ffff880b9a0c54c0), AE_NOT_EXIST (20110623/psparse-536)
[   12.502964] ACPI Error: Method parse/execution failed [\_SB_.PMI0._PMC]
(Node ffff880b9a0c5560), AE_NOT_EXIST (20110623/psparse-536)
[   12.502995] ACPI Exception: AE_NOT_EXIST, Evaluating _PMC
(20110623/power_meter-773)
[   12.569083] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[   12.569101] ACPI: Power Button [PWRF]
[   12.593188] libata version 3.00 loaded.
[   12.599014] ata_piix 0000:00:1f.5: version 2.13
[   12.599040] xen: registering gsi 17 triggering 0 polarity 1
[   12.599054] xen_map_pirq_gsi: returning irq 17 for gsi 17
[   12.599058] xen: --> pirq=17 -> irq=17 (gsi=17)
[   12.599062] Already setup the GSI :17
[   12.599067] ata_piix 0000:00:1f.5: PCI INT B -> GSI 17 (level, low) ->
IRQ 17
[   12.599078] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[   12.605513] usbcore: registered new interface driver usbfs
[   12.605563] usbcore: registered new interface driver hub
[   12.605654] usbcore: registered new device driver usb
[   12.629687] EDAC MC: Ver: 2.1.0
[   12.631709] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[   12.636599] dcdbas dcdbas: Dell Systems Management Base Driver (version
5.6.0-3.2)
[   12.639344] iTCO_vendor_support: vendor-support=0
[   12.642455] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[   12.642595] iTCO_wdt: Found a ICH9 TCO device (Version=2, TCOBASE=0x0860)
[   12.642715] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   12.646309] input: PC Speaker as /devices/platform/pcspkr/input/input1
[   12.696167] QLogic 1/10 GbE Converged/Intelligent Ethernet Driver v5.0.25
[   12.696278] xen: registering gsi 38 triggering 0 polarity 1
[   12.696304] xen: --> pirq=38 -> irq=38 (gsi=38)
[   12.696340] qlcnic 0000:03:00.0: PCI INT A -> GSI 38 (level, low) -> IRQ
38
[   12.696355] qlcnic 0000:03:00.0: setting latency timer to 64
[   12.697214] qlcnic 0000:03:00.0: 2MB memory map
[   12.706141] Error: Driver 'pcspkr' is already registered, aborting...
[   12.724504] ses 0:0:32:0: Attached Enclosure device
[   12.753170] ata_piix 0000:00:1f.5: setting latency timer to 64
[   12.753758] scsi1 : ata_piix
[   12.753916] scsi2 : ata_piix
[   12.754013] ata1: SATA max UDMA/133 cmd 0xece0 ctl 0xecf8 bmdma 0xecb0
irq 17
[   12.754021] ata2: SATA max UDMA/133 cmd 0xece8 ctl 0xecfc bmdma 0xecb8
irq 17
[   12.754076] xen: registering gsi 19 triggering 0 polarity 1
[   12.754089] xen_map_pirq_gsi: returning irq 19 for gsi 19
[   12.754093] xen: --> pirq=19 -> irq=19 (gsi=19)
[   12.754097] Already setup the GSI :19
[   12.754102] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 19 (level, low) ->
IRQ 19
[   12.754203] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[   12.754211] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[   12.754260] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus
number 1
[   12.754342] ehci_hcd 0000:00:1a.7: debug port 1
[   12.758246] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[   12.758338] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdffff800
[   12.773129] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[   12.773166] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[   12.773170] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.773174] usb usb1: Product: EHCI Host Controller
[   12.773178] usb usb1: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[   12.773181] usb usb1: SerialNumber: 0000:00:1a.7
[   12.773367] hub 1-0:1.0: USB hub found
[   12.773374] hub 1-0:1.0: 4 ports detected
[   12.773531] xen: registering gsi 21 triggering 0 polarity 1
[   12.773539] xen_map_pirq_gsi: returning irq 21 for gsi 21
[   12.773542] xen: --> pirq=21 -> irq=21 (gsi=21)
[   12.773545] Already setup the GSI :21
[   12.773550] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 21 (level, low) ->
IRQ 21
[   12.773637] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[   12.773644] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[   12.773658] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 2
[   12.773735] ehci_hcd 0000:00:1d.7: debug port 1
[   12.777625] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[   12.777699] ehci_hcd 0000:00:1d.7: irq 21, io mem 0xdffffc00
[   12.793120] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[   12.793153] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[   12.793158] usb usb2: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.793162] usb usb2: Product: EHCI Host Controller
[   12.793165] usb usb2: Manufacturer: Linux 3.2.0-2-amd64 ehci_hcd
[   12.793169] usb usb2: SerialNumber: 0000:00:1d.7
[   12.793349] hub 2-0:1.0: USB hub found
[   12.793356] hub 2-0:1.0: 6 ports detected
[   12.794027] EDAC MC1: Giving out device to 'i7core_edac.c' 'i7 core #1':
DEV 0000:fe:03.0
[   12.794072] EDAC PCI0: Giving out device to module 'i7core_edac'
controller 'EDAC PCI controller': DEV '0000:fe:03.0' (POLLED)
[   12.794706] EDAC MC0: Giving out device to 'i7core_edac.c' 'i7 core #0':
DEV 0000:ff:03.0
[   12.794734] EDAC PCI1: Giving out device to module 'i7core_edac'
controller 'EDAC PCI controller': DEV '0000:ff:03.0' (POLLED)
[   12.795151] EDAC i7core: Driver loaded, 2 memory controller(s) found.
[   12.841807] uhci_hcd: USB Universal Host Controller Interface driver
[   12.841908] xen: registering gsi 17 triggering 0 polarity 1
[   12.841917] xen_map_pirq_gsi: returning irq 17 for gsi 17
[   12.841920] xen: --> pirq=17 -> irq=17 (gsi=17)
[   12.841923] Already setup the GSI :17
[   12.841928] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[   12.841945] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[   12.841952] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[   12.841966] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus
number 3
[   12.842013] uhci_hcd 0000:00:1a.0: irq 17, io base 0x0000e8c0
[   12.842096] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001
[   12.842101] usb usb3: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.842105] usb usb3: Product: UHCI Host Controller
[   12.842108] usb usb3: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[   12.842112] usb usb3: SerialNumber: 0000:00:1a.0
[   12.842318] hub 3-0:1.0: USB hub found
[   12.842330] hub 3-0:1.0: 2 ports detected
[   12.842497] xen: registering gsi 18 triggering 0 polarity 1
[   12.842505] xen_map_pirq_gsi: returning irq 18 for gsi 18
[   12.842510] xen: --> pirq=18 -> irq=18 (gsi=18)
[   12.842513] Already setup the GSI :18
[   12.842518] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 18 (level, low) ->
IRQ 18
[   12.842534] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[   12.842540] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[   12.842552] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus
number 4
[   12.842666] uhci_hcd 0000:00:1a.1: irq 18, io base 0x0000e8e0
[   12.842753] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001
[   12.842757] usb usb4: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.842761] usb usb4: Product: UHCI Host Controller
[   12.842765] usb usb4: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[   12.842768] usb usb4: SerialNumber: 0000:00:1a.1
[   12.842946] hub 4-0:1.0: USB hub found
[   12.842957] hub 4-0:1.0: 2 ports detected
[   12.843105] xen: registering gsi 21 triggering 0 polarity 1
[   12.843113] xen_map_pirq_gsi: returning irq 21 for gsi 21
[   12.843116] xen: --> pirq=21 -> irq=21 (gsi=21)
[   12.843119] Already setup the GSI :21
[   12.843124] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 21 (level, low) ->
IRQ 21
[   12.843138] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[   12.843145] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[   12.843156] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 5
[   12.843197] uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000ec00
[   12.843282] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001
[   12.843287] usb usb5: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.843291] usb usb5: Product: UHCI Host Controller
[   12.843294] usb usb5: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[   12.843298] usb usb5: SerialNumber: 0000:00:1d.0
[   12.843479] hub 5-0:1.0: USB hub found
[   12.843488] hub 5-0:1.0: 2 ports detected
[   12.843645] xen: registering gsi 20 triggering 0 polarity 1
[   12.843653] xen_map_pirq_gsi: returning irq 20 for gsi 20
[   12.843657] xen: --> pirq=20 -> irq=20 (gsi=20)
[   12.843660] Already setup the GSI :20
[   12.843664] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 20 (level, low) ->
IRQ 20
[   12.843679] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[   12.843685] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[   12.843698] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 6
[   12.843804] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000ec20
[   12.843895] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[   12.843902] usb usb6: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.843906] usb usb6: Product: UHCI Host Controller
[   12.843911] usb usb6: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[   12.843916] usb usb6: SerialNumber: 0000:00:1d.1
[   12.844107] hub 6-0:1.0: USB hub found
[   12.844116] hub 6-0:1.0: 2 ports detected
[   12.844281] xen: registering gsi 21 triggering 0 polarity 1
[   12.844289] xen_map_pirq_gsi: returning irq 21 for gsi 21
[   12.844293] xen: --> pirq=21 -> irq=21 (gsi=21)
[   12.844296] Already setup the GSI :21
[   12.844300] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 21 (level, low) ->
IRQ 21
[   12.844317] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[   12.844324] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[   12.844336] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 7
[   12.844378] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000ec40
[   12.844483] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001
[   12.844487] usb usb7: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[   12.844491] usb usb7: Product: UHCI Host Controller
[   12.844495] usb usb7: Manufacturer: Linux 3.2.0-2-amd64 uhci_hcd
[   12.844498] usb usb7: SerialNumber: 0000:00:1d.2
[   12.844677] hub 7-0:1.0: USB hub found
[   12.844685] hub 7-0:1.0: 2 ports detected
[   13.077174] ata1: SATA link down (SStatus 0 SControl 300)
[   13.077266] ata2: SATA link down (SStatus 0 SControl 300)
[   13.221115] usb 2-3: new high-speed USB device number 3 using ehci_hcd
[   13.345114] qlcnic 0000:03:00.0: phy port: 0 switch_mode: 0,
[   13.345116]  max_tx_q: 1 max_rx_q: 8 min_tx_bw: 0x0,
[   13.345117]  max_tx_bw: 0x64 max_mtu:0x2580, capabilities: 0x6affae
[   13.361103] qlcnic 0000:03:00.0: failed card response code:0x10
[   13.361162] qlcnic 0000:03:00.0: Can't get template size 16
[   13.361167] qlcnic 0000:03:00.0: firmware v4.7.83
[   13.371640] usb 2-3: New USB device found, idVendor=046b, idProduct=ff90
[   13.371646] usb 2-3: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[   13.371650] usb 2-3: Product: Composite Device
[   13.371653] usb 2-3: Manufacturer: American Megatrends Inc.
[   13.371657] usb 2-3: SerialNumber: serial
[   13.393138] qlcnic: 24:b6:fd:64:1e:45: QME8242-k 10GbE Dual Port
Mezzanine Card Board Chip rev 0x54
[   13.393460] usbcore: registered new interface driver uas
[   13.393559] qlcnic 0000:03:00.0: using msi-x interrupts
[   13.394251] qlcnic 0000:03:00.0: eth0: XGbE port initialized
[   13.394290] xen: registering gsi 38 triggering 0 polarity 1
[   13.394304] xen_map_pirq_gsi: returning irq 38 for gsi 38
[   13.394308] xen: --> pirq=38 -> irq=38 (gsi=38)
[   13.394311] Already setup the GSI :38
[   13.394316] qlcnic 0000:03:00.1: PCI INT A -> GSI 38 (level, low) -> IRQ
38
[   13.394331] qlcnic 0000:03:00.1: setting latency timer to 64
[   13.395317] qlcnic 0000:03:00.1: 2MB memory map
[   13.404052] Initializing USB Mass Storage driver...
[   13.404264] scsi3 : usb-storage 2-3:1.0
[   13.404487] scsi4 : usb-storage 2-3:1.1
[   13.404693] scsi5 : usb-storage 2-3:1.2
[   13.404799] usbcore: registered new interface driver usb-storage
[   13.404802] USB Mass Storage support registered.
[   13.409136] qlcnic 0000:03:00.1: phy port: 1 switch_mode: 0,
[   13.409138]  max_tx_q: 1 max_rx_q: 8 min_tx_bw: 0x0,
[   13.409139]  max_tx_bw: 0x64 max_mtu:0x2580, capabilities: 0x6affae
[   13.425118] qlcnic 0000:03:00.1: failed card response code:0x10
[   13.425174] qlcnic 0000:03:00.1: Can't get template size 16
[   13.425178] qlcnic 0000:03:00.1: firmware v4.7.83
[   13.449525] qlcnic 0000:03:00.1: using msi-x interrupts
[   13.450132] qlcnic 0000:03:00.1: eth1: XGbE port initialized
[   13.677120] usb 5-2: new full-speed USB device number 2 using uhci_hcd
[   13.840290] usb 5-2: New USB device found, idVendor=046b, idProduct=ff10
[   13.840296] usb 5-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=3
[   13.840300] usb 5-2: Product: Virtual Keyboard and Mouse
[   13.840304] usb 5-2: Manufacturer: American Megatrends Inc.
[   13.840307] usb 5-2: SerialNumber: serial
[   13.905626] input: American Megatrends Inc. Virtual Keyboard and Mouse as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input2
[   13.905800] generic-usb 0003:046B:FF10.0001: input,hidraw0: USB HID v1.10
Keyboard [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1d.0-2/input0
[   13.912572] input: American Megatrends Inc. Virtual Keyboard and Mouse as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.1/input/input3
[   13.912816] generic-usb 0003:046B:FF10.0002: input,hidraw1: USB HID v1.10
Mouse [American Megatrends Inc. Virtual Keyboard and Mouse] on
usb-0000:00:1d.0-2/input1
[   13.912843] usbcore: registered new interface driver usbhid
[   13.912846] usbhid: USB HID core driver
[   14.085125] usb 6-2: new low-speed USB device number 2 using uhci_hcd
[   14.262910] usb 6-2: New USB device found, idVendor=0624, idProduct=de11
[   14.262915] usb 6-2: New USB device strings: Mfr=1, Product=2,
SerialNumber=0
[   14.262919] usb 6-2: Product: Avocent KVM
[   14.262923] usb 6-2: Manufacturer: Avocent
[   14.298214] input: Avocent Avocent KVM as
/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.0/input/input4
[   14.298395] generic-usb 0003:0624:DE11.0003: input,hidraw2: USB HID v1.10
Keyboard [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input0
[   14.307733] Adding 1952764k swap on /dev/sda2.  Priority:-1 extents:1
across:1952764k 
[   14.319436] EXT4-fs (sda1): re-mounted. Opts: (null)
[   14.328276] input: Avocent Avocent KVM as
/devices/pci0000:00/0000:00:1d.1/usb6/6-2/6-2:1.1/input/input5
[   14.328523] generic-usb 0003:0624:DE11.0004: input,hidraw3: USB HID v1.10
Mouse [Avocent Avocent KVM] on usb-0000:00:1d.1-2/input1
[   14.445936] scsi 3:0:0:0: Direct-Access     iDRAC    LCDRIVE         
1.00 PQ: 0 ANSI: 0 CCS
[   14.449814] scsi 4:0:0:0: CD-ROM            iDRAC    Virtual CDROM   
1.00 PQ: 0 ANSI: 0 CCS
[   14.450813] scsi 5:0:0:0: Direct-Access     iDRAC    Virtual Floppy  
1.00 PQ: 0 ANSI: 0 CCS
[   14.460804] sd 3:0:0:0: [sdb] Attached SCSI removable disk
[   14.462790] sd 5:0:0:0: [sdc] Attached SCSI removable disk
[   14.557541] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[   14.562159] sr0: scsi-1 drive
[   14.562164] cdrom: Uniform CD-ROM driver Revision: 3.20
[   14.562421] sr 4:0:0:0: Attached scsi CD-ROM sr0
[   14.642111] Event-channel device installed.
[   14.805454] loop: module loaded
[   15.261328] EXT4-fs (dm-0): mounted filesystem with ordered data mode.
Opts: errors=remount-ro
[   16.987146] openvswitch_mod: Open vSwitch switching datapath 1.4.0, built
Mar  6 2012 12:16:33
[   18.325633] ip_tables: (C) 2000-2006 Netfilter Core Team
[   18.434036] device xenbr0 entered promiscuous mode
[   18.445825] device eth1 entered promiscuous mode
[   18.446092] device eth0 entered promiscuous mode
[   18.457027] device vlan100 entered promiscuous mode
[   18.484409] device vlan900 entered promiscuous mode
[   18.508746] device vlan500 entered promiscuous mode
[   18.629208] qlcnic 0000:03:00.0: restoring config space at offset 0x1
(was 0x100400, writing 0x100406)
[   19.374883] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   19.481194] qlcnic 0000:03:00.1: restoring config space at offset 0x1
(was 0x100400, writing 0x100406)
[   20.382891] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   20.688307] RPC: Registered named UNIX socket transport module.
[   20.688312] RPC: Registered udp transport module.
[   20.688315] RPC: Registered tcp transport module.
[   20.688318] RPC: Registered tcp NFSv4.1 backchannel transport module.
[   20.715885] FS-Cache: Loaded
[   20.741906] FS-Cache: Netfs 'nfs' registered for caching
[   20.755536] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).

--
View this message in context: 
http://xen.1045712.n5.nabble.com/no-carrier-on-qlogic-8242-10gig-with-linux-3-x-running-xen-tp5597283p5597400.html
Sent from the Xen - Dev mailing list archive at Nabble.com.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.