[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] crash in is_xen_swiotlb_buffer



On Wed, 02 May 2012, Konrad Rzeszutek Wilk wrote:
...snip...
> > [    0.000000] Hardware name: PowerEdge R310
> > [    0.000000] Modules linked in:
> > [    0.000000] Pid: 0, comm: swapper Not tainted 3.2.9 #9
> > [    0.000000] Call Trace:
> > [    0.000000]  [<c104236b>] ? warn_slowpath_common+0x6a/0x7b
> > [    0.000000]  [<c1005442>] ? xen_mc_issue+0x34/0x62
> > [    0.000000]  [<c1042389>] ? warn_slowpath_null+0xd/0x10
> > [    0.000000]  [<c1005442>] ? xen_mc_issue+0x34/0x62
> > [    0.000000]  [<c1005f3b>] ? xen_set_pmd_hyper+0x3c/0x42
> > [    0.000000]  [<c102edbe>] ? set_pmd_pfn+0xde/0xf9
> > [    0.000000]  [<c168b652>] ? init_alloc_remap+0x1b3/0x216
> > [    0.000000]  [<c168aa48>] ? setup_node_data+0x4c/0x22f
> > [    0.000000]  [<c168b203>] ? T.744+0x290/0x2c2
> > [    0.000000]  [<c168b2ac>] ? T.743+0x77/0x1a1
> > [    0.000000]  [<c1025290>] ? default_get_apic_id+0x14/0x33
> > [    0.000000]  [<c168b3ed>] ? initmem_init+0x5/0xb7
> > [    0.000000]  [<c167cef4>] ? setup_arch+0x5bf/0x694
> > [    0.000000]  [<c100b840>] ? __spin_time_accum+0x26/0x36
> > [    0.000000]  [<c167852c>] ? start_kernel+0x81/0x34d
> > [    0.000000]  [<c167a258>] ? xen_start_kernel+0x554/0x55b
> > [    0.000000] ---[ end trace 4eaa2a86a8e2da22 ]---
> 
> So I've been able to reproduce this and it is due to CONFIG_NUMA=y
> set on 32-bit builds.
> 
> From a brief look, it looks as this is happening:
> 
>         /* perform actual remap */
>         for (pfn = 0; pfn < size >> PAGE_SHIFT; pfn += PTRS_PER_PTE)
>                 set_pmd_pfn((unsigned long)remap_va + (pfn << PAGE_SHIFT),
>                             (node_pa >> PAGE_SHIFT) + pfn,
>                             PAGE_KERNEL_LARGE);
> 
> The PAGE_KERNEL_LARGE means that the PSE bit (so the 2MB) is set
> which is a no-no. What is weird is that acpi_numa is disabled when booting
> under Xen, but somehow this (which in my case was the 'fake_numa' code)
> still gets turned on. Even doing 'numa=off' on the command line causes
> this to appear.

Thanks for the investigation, I'll turn off NUMA in my config. 

Goncalo

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.