[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH 3/3] docs: qxl vga interface support



On Tue, 2012-06-05 at 12:26 +0100, ZhouPeng wrote:
> Signed-off-by: Zhou Peng <ailvpeng25@xxxxxxxxx>

You can/should include this with the patch which adds the functionality,
no need to separate it out.
 
> 
> diff -r 1804a873a64d docs/man/xl.cfg.pod.5
> --- a/docs/man/xl.cfg.pod.5   Tue Jun 05 17:56:46 2012 +0800
> +++ b/docs/man/xl.cfg.pod.5   Tue Jun 05 18:58:12 2012 +0800
> @@ -699,11 +699,14 @@ in the B<VFB_SPEC_STRING> for configurin
> 
>  Sets the amount of RAM which the emulated video card will contain,
>  which in turn limits the resolutions and bit depths which will be
> -available. This option is only available when using the B<stdvga>
> -option (see below). The default is 8MB which is sufficient for
> -e.g. 1600x1200 at 32bpp. When not using the B<stdvga> option the
> -amount of video ram is fixed at 4MB which is sufficient for 1024x768
> +available. This option is available when using the B<stdvga> and
> +B<qxl> options (see below).
> +For B<stdvga> option, the default is 8MB which is sufficient for
> +e.g. 1600x1200 at 32bpp. When not using the B<stdvga> and B<qxl> options,
> +the amount of video ram is fixed at 4MB which is sufficient for 1024x768
>  at 32 bpp.
> +For B<qxl> option, it may be adjusted automatically (see B<qxlram>
> +option below).
> 
>  =item B<stdvga=BOOLEAN>
> 
> @@ -711,6 +714,27 @@ emulated graphics device. The default is
>  emulated graphics device. The default is false which means to emulate
>  a Cirrus Logic GD5446 VGA card. If your guest supports VBE 2.0 or
>  later (e.g. Windows XP onwards) then you should enable this.
> +
> +=item B<qxl=BOOLEAN>
> +
> +Select a QXL VGA card as the emulated graphics device. This enables
> +the other QXL-related settings.
> +In general, QXL should work with the Spice remote display protocol for
> +acceleration, but QXL driver is necessary in guest. QXL can also work
> +with the VNC protocol like a standard VGA without acceleration.
> +
> +=item B<qxlram=MBYTES>
> +
> +Sets the amount of RAM bar for QXL VGA card. The default is 64 MiB.
> +The total size of QXL video memory is determined by B<qxlram> (RAM bar)
> +and B<qxlvram> (VRAM bar), the size of each is settable.
> +B<videoram> can set the amount of RAM which emulated video card
> +will contain, but if it can't meet the need of QXL, it will be
> +adjusted accordingly.
> +
> +=item B<qxlvram=MBYTES>
> +
> +Sets the amount of VRAM bar for QXL VGA card. The default is 64 MiB.

It's not clear to me having read this what the distinction between RAM
and VRAM is in the context of QXL. When and why would I want to set
either?

Ian.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.