|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH 11/38] arm: implement p2m lookup
On Wed, 2012-06-06 at 15:01 +0100, Stefano Stabellini wrote:
> On Fri, 1 Jun 2012, Ian Campbell wrote:
> > Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
> > ---
> > xen/arch/arm/p2m.c | 71
> > ++++++++++++++++++++++++++++++++++++++++++--
> > xen/include/asm-arm/p2m.h | 3 ++
> > 2 files changed, 70 insertions(+), 4 deletions(-)
> >
> > diff --git a/xen/arch/arm/p2m.c b/xen/arch/arm/p2m.c
> > index 095e608..9b40e93 100644
> > --- a/xen/arch/arm/p2m.c
> > +++ b/xen/arch/arm/p2m.c
> > @@ -10,10 +10,20 @@ void dump_p2m_lookup(struct domain *d, paddr_t addr)
> > struct p2m_domain *p2m = &d->arch.p2m;
> > lpae_t *first = NULL, *second = NULL, *third = NULL;
> >
> > - printk("dom%d IPA %#016llx\n", d->domain_id, addr);
> > + printk("dom%d IPA %#"PRIpaddr"\n", d->domain_id, addr);
> > +
> > + printk("P2M @ %p mfn:%#lx (%#03llx,%#03llx,%#03llx)\n",
> > + p2m->first_level,
> > + page_to_mfn(p2m->first_level),
> > + first_table_offset(addr),
> > + second_table_offset(addr),
> > + third_table_offset(addr));
> > +
> > + if ( first_table_offset(addr) >= LPAE_ENTRIES )
> > + goto done;
> >
> > first = __map_domain_page(p2m->first_level);
> > - printk("1ST[%#03llx] = %#016llx\n",
> > + printk("1ST[%#03llx] = %#"PRIpaddr"\n",
> > first_table_offset(addr),
> > first[first_table_offset(addr)].bits);
> > if ( !first[first_table_offset(addr)].p2m.valid ||
> > @@ -21,7 +31,7 @@ void dump_p2m_lookup(struct domain *d, paddr_t addr)
> > goto done;
> >
> > second = map_domain_page(first[first_table_offset(addr)].p2m.base);
> > - printk("2ND[%#03llx] = %#016llx\n",
> > + printk("2ND[%#03llx] = %#"PRIpaddr"\n",
> > second_table_offset(addr),
> > second[second_table_offset(addr)].bits);
> > if ( !second[second_table_offset(addr)].p2m.valid ||
> > @@ -29,7 +39,7 @@ void dump_p2m_lookup(struct domain *d, paddr_t addr)
> > goto done;
> >
> > third = map_domain_page(second[second_table_offset(addr)].p2m.base);
> > - printk("3RD[%#03llx] = %#016llx\n",
> > + printk("3RD[%#03llx] = %#"PRIpaddr"\n",
> > third_table_offset(addr),
> > third[third_table_offset(addr)].bits);
> >
> > @@ -51,6 +61,59 @@ void p2m_load_VTTBR(struct domain *d)
> > isb(); /* Ensure update is visible */
> > }
>
> there is no need to introduce p2m_lookup in the same patch you do these
> unrelated printk adjustments, correct?
>
Right, I think I've just put them in the wrong patch by mistake, I'll
figure out what I meant to do ...
>
> > +/*
> > + * Lookup the MFN corresponding to a domain's PFN.
> > + *
> > + * There are no processor functions to do a stage 2 only lookup therefore
> > we
> > + * do a a software walk.
> > + */
> > +paddr_t p2m_lookup(struct domain *d, paddr_t paddr)
> > +{
> > + struct p2m_domain *p2m = &d->arch.p2m;
> > + lpae_t pte, *first = NULL, *second = NULL, *third = NULL;
> > + paddr_t maddr = INVALID_PADDR;
> > +
> > + spin_lock(&p2m->lock);
> > +
> > + first = __map_domain_page(p2m->first_level);
> > + if ( !first[first_table_offset(paddr)].p2m.valid )
> > + goto done_err;
> > + if ( !first[first_table_offset(paddr)].p2m.table )
> > + {
> > + pte = first[first_table_offset(paddr)];
> > + goto done;
> > + }
> > +
> > + second = map_domain_page(first[first_table_offset(paddr)].p2m.base);
> > + if ( !second[second_table_offset(paddr)].p2m.valid )
> > + goto done_err;
> > + if ( !second[second_table_offset(paddr)].p2m.table )
> > + {
> > + pte = second[second_table_offset(paddr)];
> > + goto done;
> > + }
> > +
> > + third = map_domain_page(second[second_table_offset(paddr)].p2m.base);
> > + if ( !third[third_table_offset(paddr)].p2m.valid )
> > + goto done_err;
> > + if ( !third[third_table_offset(paddr)].p2m.table )
> > + goto done_err;
> > +
> > + pte = third[third_table_offset(paddr)];
> > +
> > +done:
> > +
> > + maddr = (pte.bits & PADDR_MASK & PAGE_MASK) | (paddr & ~PAGE_MASK);
> > +done_err:
> > + if (third) unmap_domain_page(third);
> > + if (second) unmap_domain_page(second);
> > + if (first) unmap_domain_page(first);
> > +
> > + spin_unlock(&p2m->lock);
> > +
> > + return maddr;
> > +}
> > +
>
> this function looks correct though
>
> > int guest_physmap_mark_populate_on_demand(struct domain *d,
> > unsigned long gfn,
> > unsigned int order)
> > diff --git a/xen/include/asm-arm/p2m.h b/xen/include/asm-arm/p2m.h
> > index 349923a..1afd5cb 100644
> > --- a/xen/include/asm-arm/p2m.h
> > +++ b/xen/include/asm-arm/p2m.h
> > @@ -32,6 +32,9 @@ int p2m_alloc_table(struct domain *d);
> > /* */
> > void p2m_load_VTTBR(struct domain *d);
> >
> > +/* */
> > +paddr_t p2m_lookup(struct domain *d, paddr_t gpfn);
> > +
> > /* Setup p2m RAM mapping for domain d from start-end. */
> > int p2m_populate_ram(struct domain *d, paddr_t start, paddr_t end);
> > /* Map MMIO regions in the p2m: start_gaddr and end_gaddr is the range
> > --
> > 1.7.9.1
> >
> >
> > _______________________________________________
> > Xen-devel mailing list
> > Xen-devel@xxxxxxxxxxxxx
> > http://lists.xen.org/xen-devel
> >
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
![]() |
Lists.xenproject.org is hosted with RackSpace, monitoring our |