[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v13 05/11] libxl: convert libxl_device_nic_add to an async operation



This patch converts libxl_device_nic_add to an ao operation that
waits for device backend to reach state XenbusStateInitWait and then
marks the operation as completed. This is not really useful now, but
will be used by latter patches that will launch hotplug scripts after
we reached the desired xenbus state.

Calls to libxl_device_nic_add have also been moved to occur after the
device model has been launched, so when hotplug scripts are called
from this functions the interfaces already exists.

As usual, libxl_device_nic_add callers have been modified, and the
internal function libxl__device_disk_add has been used if the call was
inside an already running ao.

Changes since v9:

 * Fixed Ocaml bindings.

Changes since v5:

 * Updated to use the new ao_devices struct.

 * Renamed ao_device in nic_add to aodev.

Changes since v4:

 * Used the macro defined in previous patch to define the generic
   callback to wait for nics to be connected.

Cc: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Signed-off-by: Roger Pau Monne <roger.pau@xxxxxxxxxx>
---
 tools/libxl/libxl.c                  |   29 ++++++++++++++-----
 tools/libxl/libxl.h                  |    3 +-
 tools/libxl/libxl_create.c           |   51 ++++++++++++++++++++++++++++-----
 tools/libxl/libxl_device.c           |    2 +
 tools/libxl/libxl_dm.c               |   38 +++++++++++++++++++++++--
 tools/libxl/libxl_internal.h         |    9 ++++++
 tools/libxl/xl_cmdimpl.c             |    2 +-
 tools/ocaml/libs/xl/xenlight_stubs.c |    2 +-
 8 files changed, 114 insertions(+), 22 deletions(-)

diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index d678501..26e1fce 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -2447,12 +2447,13 @@ static int libxl__device_from_nic(libxl__gc *gc, 
uint32_t domid,
     return 0;
 }
 
-int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, libxl_device_nic *nic)
+void libxl__device_nic_add(libxl__egc *egc, uint32_t domid,
+                           libxl_device_nic *nic, libxl__ao_device *aodev)
 {
-    GC_INIT(ctx);
+    STATE_AO_GC(aodev->ao);
     flexarray_t *front;
     flexarray_t *back;
-    libxl__device device;
+    libxl__device *device;
     char *dompath, **l;
     unsigned int nb, rc;
 
@@ -2483,7 +2484,8 @@ int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, 
libxl_device_nic *nic)
         }
     }
 
-    rc = libxl__device_from_nic(gc, domid, nic, &device);
+    GCNEW(device);
+    rc = libxl__device_from_nic(gc, domid, nic, device);
     if ( rc != 0 ) goto out_free;
 
     flexarray_append(back, "frontend-id");
@@ -2524,6 +2526,9 @@ int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, 
libxl_device_nic *nic)
     flexarray_append(back, libxl__strdup(gc, nic->bridge));
     flexarray_append(back, "handle");
     flexarray_append(back, libxl__sprintf(gc, "%d", nic->devid));
+    flexarray_append(back, "type");
+    flexarray_append(back, libxl__strdup(gc,
+                                     libxl_nic_type_to_string(nic->nictype)));
 
     flexarray_append(front, "backend-id");
     flexarray_append(front, libxl__sprintf(gc, "%d", nic->backend_domid));
@@ -2534,18 +2539,22 @@ int libxl_device_nic_add(libxl_ctx *ctx, uint32_t 
domid, libxl_device_nic *nic)
     flexarray_append(front, "mac");
     flexarray_append(front, libxl__sprintf(gc,
                                     LIBXL_MAC_FMT, LIBXL_MAC_BYTES(nic->mac)));
-    libxl__device_generic_add(gc, XBT_NULL, &device,
+    libxl__device_generic_add(gc, XBT_NULL, device,
                              libxl__xs_kvs_of_flexarray(gc, back, back->count),
                              libxl__xs_kvs_of_flexarray(gc, front, 
front->count));
 
-    /* FIXME: wait for plug */
+    aodev->dev = device;
+    aodev->action = DEVICE_CONNECT;
+    libxl__wait_device_connection(egc, aodev);
+
     rc = 0;
 out_free:
     flexarray_free(back);
     flexarray_free(front);
 out:
-    GC_FREE;
-    return rc;
+    aodev->rc = rc;
+    if (rc) aodev->callback(egc, aodev);
+    return;
 }
 
 static void libxl__device_nic_from_xs_be(libxl__gc *gc,
@@ -3037,6 +3046,7 @@ DEFINE_DEVICE_REMOVE(vfb, destroy, 1)
 /* Macro for defining device addition functions in a compact way */
 /* The following functions are defined:
  * libxl_device_disk_add
+ * libxl_device_nic_add
  */
 
 #define DEFINE_DEVICE_ADD(type)                                         \
@@ -3060,6 +3070,9 @@ DEFINE_DEVICE_REMOVE(vfb, destroy, 1)
 /* disk */
 DEFINE_DEVICE_ADD(disk)
 
+/* nic */
+DEFINE_DEVICE_ADD(nic)
+
 #undef DEFINE_DEVICE_ADD
 
 
/******************************************************************************/
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index f3161d5..d548090 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -696,7 +696,8 @@ int libxl_device_disk_getinfo(libxl_ctx *ctx, uint32_t 
domid,
 int libxl_cdrom_insert(libxl_ctx *ctx, uint32_t domid, libxl_device_disk 
*disk);
 
 /* Network Interfaces */
-int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, libxl_device_nic 
*nic);
+int libxl_device_nic_add(libxl_ctx *ctx, uint32_t domid, libxl_device_nic *nic,
+                         const libxl_asyncop_how *ao_how);
 int libxl_device_nic_remove(libxl_ctx *ctx, uint32_t domid,
                             libxl_device_nic *nic,
                             const libxl_asyncop_how *ao_how);
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 5c7a242..2180e81 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -562,6 +562,9 @@ static void domcreate_bootloader_done(libxl__egc *egc,
 static void domcreate_launch_dm(libxl__egc *egc, libxl__ao_devices *aodevs,
                                 int ret);
 
+static void domcreate_attach_pci(libxl__egc *egc, libxl__ao_devices *aodevs,
+                                 int ret);
+
 static void domcreate_console_available(libxl__egc *egc,
                                         libxl__domain_create_state *dcs);
 
@@ -896,13 +899,11 @@ static void domcreate_launch_dm(libxl__egc *egc, 
libxl__ao_devices *aodevs,
         goto error_out;
     }
     for (i = 0; i < d_config->num_nics; i++) {
-        ret = libxl_device_nic_add(ctx, domid, &d_config->nics[i]);
-        if (ret) {
-            LIBXL__LOG(ctx, LIBXL__LOG_ERROR,
-                       "cannot add nic %d to domain: %d", i, ret);
-            ret = ERROR_FAIL;
-            goto error_out;
-        }
+        /* We have to init the nic here, because we still haven't
+         * called libxl_device_nic_add at this point, but qemu needs
+         * the nic information to be complete.
+         */
+        libxl__device_nic_setdefault(gc, &d_config->nics[i]);
     }
     switch (d_config->c_info.type) {
     case LIBXL_DOMAIN_TYPE_HVM:
@@ -975,7 +976,6 @@ static void domcreate_devmodel_started(libxl__egc *egc,
 {
     libxl__domain_create_state *dcs = CONTAINER_OF(dmss, *dcs, dmss.dm);
     STATE_AO_GC(dmss->spawn.ao);
-    int i;
     libxl_ctx *ctx = CTX;
     int domid = dcs->guest_domid;
 
@@ -995,6 +995,41 @@ static void domcreate_devmodel_started(libxl__egc *egc,
         }
     }
 
+    /* Plug nic interfaces */
+    if (d_config->num_nics > 0) {
+        /* Attach nics */
+        dcs->aodevs.size = d_config->num_nics;
+        dcs->aodevs.callback = domcreate_attach_pci;
+        libxl__prepare_ao_devices(ao, &dcs->aodevs);
+        libxl__add_nics(egc, ao, domid, 0, d_config, &dcs->aodevs);
+        return;
+    }
+
+    domcreate_attach_pci(egc, &dcs->aodevs, 0);
+    return;
+
+error_out:
+    assert(ret);
+    domcreate_complete(egc, dcs, ret);
+}
+
+static void domcreate_attach_pci(libxl__egc *egc, libxl__ao_devices *aodevs,
+                                 int ret)
+{
+    libxl__domain_create_state *dcs = CONTAINER_OF(aodevs, *dcs, aodevs);
+    STATE_AO_GC(dcs->ao);
+    int i;
+    libxl_ctx *ctx = CTX;
+    int domid = dcs->guest_domid;
+
+    /* convenience aliases */
+    libxl_domain_config *const d_config = dcs->guest_config;
+
+    if (ret) {
+        LOG(ERROR, "unable to add nic devices");
+        goto error_out;
+    }
+
     for (i = 0; i < d_config->num_pcidevs; i++)
         libxl__device_pci_add(gc, domid, &d_config->pcidevs[i], 1);
 
diff --git a/tools/libxl/libxl_device.c b/tools/libxl/libxl_device.c
index 835b4ad..ed33f6f 100644
--- a/tools/libxl/libxl_device.c
+++ b/tools/libxl/libxl_device.c
@@ -455,6 +455,7 @@ void libxl__ao_devices_callback(libxl__egc *egc, 
libxl__ao_device *aodev)
  *
  * The following functions are defined:
  * libxl__add_disks
+ * libxl__add_nics
  */
 
 #define DEFINE_DEVICES_ADD(type)                                               
\
@@ -473,6 +474,7 @@ void libxl__ao_devices_callback(libxl__egc *egc, 
libxl__ao_device *aodev)
     }
 
 DEFINE_DEVICES_ADD(disk)
+DEFINE_DEVICES_ADD(nic)
 
 #undef DEFINE_DEVICES_ADD
 
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index 8a731ae..1b17ef5 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -716,6 +716,10 @@ static void spawn_stubdom_pvqemu_cb(libxl__egc *egc,
 static void spawn_stub_launch_dm(libxl__egc *egc,
                                  libxl__ao_devices *aodevs, int ret);
 
+static void stubdom_pvqemu_cb(libxl__egc *egc,
+                              libxl__ao_devices *aodevs,
+                              int rc);
+
 static void spaw_stubdom_pvqemu_destroy_cb(libxl__egc *egc,
                                            libxl__destroy_domid_state *dis,
                                            int rc);
@@ -887,9 +891,11 @@ static void spawn_stub_launch_dm(libxl__egc *egc,
      }
 
     for (i = 0; i < dm_config->num_nics; i++) {
-        ret = libxl_device_nic_add(ctx, dm_domid, &dm_config->nics[i]);
-        if (ret)
-            goto out;
+         /* We have to init the nic here, because we still haven't
+         * called libxl_device_nic_add at this point, but qemu needs
+         * the nic information to be complete.
+         */
+        libxl__device_nic_setdefault(gc, &dm_config->nics[i]);
     }
     ret = libxl_device_vfb_add(ctx, dm_domid, &dm_config->vfbs[0]);
     if (ret)
@@ -966,9 +972,35 @@ static void spawn_stubdom_pvqemu_cb(libxl__egc *egc,
         CONTAINER_OF(stubdom_dmss, *sdss, pvqemu);
     STATE_AO_GC(sdss->dm.spawn.ao);
     uint32_t dm_domid = sdss->pvqemu.guest_domid;
+    libxl_domain_config *d_config = stubdom_dmss->guest_config;
 
     if (rc) goto out;
 
+    if (d_config->num_nics > 0) {
+        sdss->aodevs.size = d_config->num_nics;
+        sdss->aodevs.callback = stubdom_pvqemu_cb;
+        libxl__prepare_ao_devices(ao, &sdss->aodevs);
+        libxl__add_nics(egc, ao, dm_domid, 0, d_config, &sdss->aodevs);
+        return;
+    }
+
+out:
+    stubdom_pvqemu_cb(egc, &sdss->aodevs, rc);
+}
+
+static void stubdom_pvqemu_cb(libxl__egc *egc,
+                              libxl__ao_devices *aodevs,
+                              int rc)
+{
+    libxl__stub_dm_spawn_state *sdss = CONTAINER_OF(aodevs, *sdss, aodevs);
+    STATE_AO_GC(sdss->dm.spawn.ao);
+    uint32_t dm_domid = sdss->pvqemu.guest_domid;
+
+    if (rc) {
+        LOGE(ERROR, "error connecting nics devices");
+        goto out;
+    }
+
     rc = libxl_domain_unpause(CTX, dm_domid);
     if (rc) goto out;
 
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index ac2e501..6b92d66 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1928,6 +1928,11 @@ _hidden void libxl__device_disk_add(libxl__egc *egc, 
uint32_t domid,
                                     libxl_device_disk *disk,
                                     libxl__ao_device *aodev);
 
+/* AO operation to connect a nic device */
+_hidden void libxl__device_nic_add(libxl__egc *egc, uint32_t domid,
+                                   libxl_device_nic *nic,
+                                   libxl__ao_device *aodev);
+
 /* Waits for the passed device to reach state XenbusStateInitWait.
  * This is not really useful by itself, but is important when executing
  * hotplug scripts, since we need to be sure the device is in the correct
@@ -2323,6 +2328,10 @@ _hidden void libxl__add_disks(libxl__egc *egc, libxl__ao 
*ao, uint32_t domid,
                               int start, libxl_domain_config *d_config,
                               libxl__ao_devices *aodevs);
 
+_hidden void libxl__add_nics(libxl__egc *egc, libxl__ao *ao, uint32_t domid,
+                             int start, libxl_domain_config *d_config,
+                             libxl__ao_devices *aodevs);
+
 /*----- device model creation -----*/
 
 /* First layer; wraps libxl__spawn_spawn. */
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index bfc6e5b..90aa415 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -5244,7 +5244,7 @@ int main_networkattach(int argc, char **argv)
         return 0;
     }
 
-    if (libxl_device_nic_add(ctx, domid, &nic)) {
+    if (libxl_device_nic_add(ctx, domid, &nic, 0)) {
         fprintf(stderr, "libxl_device_nic_add failed.\n");
         return 1;
     }
diff --git a/tools/ocaml/libs/xl/xenlight_stubs.c 
b/tools/ocaml/libs/xl/xenlight_stubs.c
index a158351..0e9c65e 100644
--- a/tools/ocaml/libs/xl/xenlight_stubs.c
+++ b/tools/ocaml/libs/xl/xenlight_stubs.c
@@ -281,7 +281,7 @@ value stub_xl_device_nic_add(value info, value domid)
        device_nic_val(&gc, &lg, &c_info, info);
 
        INIT_CTX();
-       ret = libxl_device_nic_add(ctx, Int_val(domid), &c_info);
+       ret = libxl_device_nic_add(ctx, Int_val(domid), &c_info, 0);
        if (ret != 0)
                failwith_xl("nic_add", &lg);
        FREE_CTX();
-- 
1.7.7.5 (Apple Git-26)


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.