[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH 09/11] add iomem support to libxl



This patch adds a new option for xen config files for
directly mapping hardware io memory into a vm.

Signed-off-by: Matthew Fioravante <matthew.fioravante@xxxxxxxxxx>

diff --git a/docs/man/xl.cfg.pod.5 b/docs/man/xl.cfg.pod.5
index 013270d..428da21 100644
--- a/docs/man/xl.cfg.pod.5
+++ b/docs/man/xl.cfg.pod.5
@@ -496,6 +496,17 @@ is given in hexadecimal and may either a span e.g. 
C<2f8-2ff>
 It is recommended to use this option only for trusted VMs under
 administrator control.
 
+=item B<iomem=[ "IOMEM_START,NUM_PAGES", "IOMEM_START,NUM_PAGES", ... ]>
+
+Allow guest to access specific hardware I/O memory pages. B<IOMEM_START>
+is a physical page number. B<NUM_PAGES> is the number
+of pages beginning with B<START_PAGE> to allow access. Both values
+must be given in hexadecimal.
+
+It is recommended to use this option only for trusted VMs under
+administrator control.
+
+
 =item B<irqs=[ NUMBER, NUMBER, ... ]>
 
 Allow a guest to access specific physical IRQs.
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index ef17f05..6cb586b 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -963,6 +963,24 @@ static void domcreate_launch_dm(libxl__egc *egc, 
libxl__multidev *multidev,
         }
     }
 
+    for (i = 0; i < d_config->b_info.num_iomem; i++) {
+        libxl_iomem_range *io = &d_config->b_info.iomem[i];
+
+        LOG(DEBUG, "dom%d iomem %"PRIx64"-%"PRIx64,
+            domid, io->start, io->start + io->number - 1);
+
+        ret = xc_domain_iomem_permission(CTX->xch, domid,
+                                          io->start, io->number, 1);
+        if ( ret<0 ) {
+            LOGE(ERROR,
+                 "failed give dom%d access to iomem range %"PRIx64"-%"PRIx64,
+                 domid, io->start, io->start + io->number - 1);
+            ret = ERROR_FAIL;
+        }
+    }
+
+
+
     for (i = 0; i < d_config->num_nics; i++) {
         /* We have to init the nic here, because we still haven't
          * called libxl_device_nic_add at this point, but qemu needs
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 6d5c578..cf83c60 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -140,6 +140,11 @@ libxl_ioport_range = Struct("ioport_range", [
     ("number", uint32),
     ])
 
+libxl_iomem_range = Struct("iomem_range", [
+    ("start", uint64),
+    ("number", uint64),
+    ])
+
 libxl_vga_interface_info = Struct("vga_interface_info", [
     ("kind",    libxl_vga_interface_type),
     ])
@@ -284,6 +289,7 @@ libxl_domain_build_info = Struct("domain_build_info",[
 
     ("ioports",          Array(libxl_ioport_range, "num_ioports")),
     ("irqs",             Array(uint32, "num_irqs")),
+    ("iomem",            Array(libxl_iomem_range, "num_iomem")),
 
     ("u", KeyedUnion(None, libxl_domain_type, "type",
                 [("hvm", Struct(None, [("firmware",         string),
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 1627cac..fe8e925 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -574,8 +574,8 @@ static void parse_config_data(const char *config_source,
     long l;
     XLU_Config *config;
     XLU_ConfigList *cpus, *vbds, *nics, *pcis, *cvfbs, *cpuids;
-    XLU_ConfigList *ioports, *irqs;
-    int num_ioports, num_irqs;
+    XLU_ConfigList *ioports, *irqs, *iomem;
+    int num_ioports, num_irqs, num_iomem;
     int pci_power_mgmt = 0;
     int pci_msitranslate = 0;
     int pci_permissive = 0;
@@ -1005,6 +1005,30 @@ static void parse_config_data(const char *config_source,
         }
     }
 
+    if (!xlu_cfg_get_list(config, "iomem", &iomem, &num_iomem, 0)) {
+        b_info->num_iomem = num_iomem;
+        b_info->iomem = calloc(num_iomem, sizeof(*b_info->iomem));
+        if (b_info->iomem == NULL) {
+            fprintf(stderr, "unable to allocate memory for iomem\n");
+            exit(-1);
+        }
+        for (i = 0; i < num_iomem; i++) {
+            buf = xlu_cfg_get_listitem (iomem, i);
+            if (!buf) {
+                fprintf(stderr,
+                        "xl: Unable to get element %d in iomem list\n", i);
+                exit(1);
+            }
+            if(sscanf(buf, "%" SCNx64",%" SCNx64, &b_info->iomem[i].start, 
&b_info->iomem[i].number) != 2) {
+               fprintf(stderr,
+                       "xl: Invalid argument parsing iomem: %s\n", buf);
+               exit(1);
+            }
+        }
+    }
+
+
+
     if (!xlu_cfg_get_list (config, "disk", &vbds, 0, 0)) {
         d_config->num_disks = 0;
         d_config->disks = NULL;
-- 
1.7.9.5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.