Xen project Mailing List

[Xen-devel] [PATCH 2/3] docs: drop doxygen stuff

From: Ian Campbell <ian.campbell@xxxxxxxxxx>

Date: Fri, 7 Dec 2012 14:55:09 +0000

Cc: Ian Campbell <ian.campbell@xxxxxxxxxx>

Delivery-date: Fri, 07 Dec 2012 14:55:43 +0000

List-id: Xen developer discussion <xen-devel.lists.xen.org>

In the 300+ page PDF this produces I couldn't see anything which wasn't the autogenerated doxygen boilerplate stuff. Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx> --- docs/Docs.mk | 1 - docs/Doxyfile | 1218 ---------------------------------------------------- docs/Doxyfilter | 16 - docs/Makefile | 13 - docs/html.sty | 887 -------------------------------------- docs/pythfilter.py | 658 ---------------------------- 6 files changed, 0 insertions(+), 2793 deletions(-) delete mode 100644 docs/Doxyfile delete mode 100644 docs/Doxyfilter delete mode 100644 docs/html.sty delete mode 100644 docs/pythfilter.py diff --git a/docs/Docs.mk b/docs/Docs.mk index dcc8a21..db3c19d 100644 --- a/docs/Docs.mk +++ b/docs/Docs.mk @@ -1,6 +1,5 @@ FIG2DEV := fig2dev LATEX2HTML := latex2html -DOXYGEN := doxygen POD2MAN := pod2man POD2HTML := pod2html POD2TEXT := pod2text diff --git a/docs/Doxyfile b/docs/Doxyfile deleted file mode 100644 index 8ac4451..0000000 --- a/docs/Doxyfile +++ /dev/null @@ -1,1218 +0,0 @@ -# Doxyfile 1.4.2 - -# This file describes the settings to be used by the documentation system -# doxygen (www.doxygen.org) for a project -# -# All text after a hash (#) is considered a comment and will be ignored -# The format is: -# TAG = value [value, ...] -# For lists items can also be appended using: -# TAG += value [value, ...] -# Values that contain spaces should be placed between quotes (" ") - -#--------------------------------------------------------------------------- -# Project related configuration options -#--------------------------------------------------------------------------- - -# The PROJECT_NAME tag is a single word (or a sequence of words surrounded -# by quotes) that should identify the project. - -PROJECT_NAME = Xen Python Tools - -# The PROJECT_NUMBER tag can be used to enter a project or revision number. -# This could be handy for archiving the generated documentation or -# if some version control system is used. - -PROJECT_NUMBER = - -# The OUTPUT_DIRECTORY tag is used to specify the (relative or absolute) -# base path where the generated documentation will be put. -# If a relative path is entered, it will be relative to the location -# where doxygen was started. If left blank the current directory will be used. - -OUTPUT_DIRECTORY = api/tools/python - -# If the CREATE_SUBDIRS tag is set to YES, then doxygen will create -# 4096 sub-directories (in 2 levels) under the output directory of each output -# format and will distribute the generated files over these directories. -# Enabling this option can be useful when feeding doxygen a huge amount of -# source files, where putting all generated files in the same directory would -# otherwise cause performance problems for the file system. - -CREATE_SUBDIRS = NO - -# The OUTPUT_LANGUAGE tag is used to specify the language in which all -# documentation generated by doxygen is written. Doxygen will use this -# information to generate all constant output in the proper language. -# The default language is English, other supported languages are: -# Brazilian, Catalan, Chinese, Chinese-Traditional, Croatian, Czech, Danish, -# Dutch, Finnish, French, German, Greek, Hungarian, Italian, Japanese, -# Japanese-en (Japanese with English messages), Korean, Korean-en, Norwegian, -# Polish, Portuguese, Romanian, Russian, Serbian, Slovak, Slovene, Spanish, -# Swedish, and Ukrainian. - -OUTPUT_LANGUAGE = English - -# This tag can be used to specify the encoding used in the generated output. -# The encoding is not always determined by the language that is chosen, -# but also whether or not the output is meant for Windows or non-Windows users. -# In case there is a difference, setting the USE_WINDOWS_ENCODING tag to YES -# forces the Windows encoding (this is the default for the Windows binary), -# whereas setting the tag to NO uses a Unix-style encoding (the default for -# all platforms other than Windows). - -USE_WINDOWS_ENCODING = NO - -# If the BRIEF_MEMBER_DESC tag is set to YES (the default) Doxygen will -# include brief member descriptions after the members that are listed in -# the file and class documentation (similar to JavaDoc). -# Set to NO to disable this. - -BRIEF_MEMBER_DESC = YES - -# If the REPEAT_BRIEF tag is set to YES (the default) Doxygen will prepend -# the brief description of a member or function before the detailed description. -# Note: if both HIDE_UNDOC_MEMBERS and BRIEF_MEMBER_DESC are set to NO, the -# brief descriptions will be completely suppressed. - -REPEAT_BRIEF = YES - -# This tag implements a quasi-intelligent brief description abbreviator -# that is used to form the text in various listings. Each string -# in this list, if found as the leading text of the brief description, will be -# stripped from the text and the result after processing the whole list, is -# used as the annotated text. Otherwise, the brief description is used as-is. -# If left blank, the following values are used ("$name" is automatically -# replaced with the name of the entity): "The $name class" "The $name widget" -# "The $name file" "is" "provides" "specifies" "contains" -# "represents" "a" "an" "the" - -ABBREVIATE_BRIEF = - -# If the ALWAYS_DETAILED_SEC and REPEAT_BRIEF tags are both set to YES then -# Doxygen will generate a detailed section even if there is only a brief -# description. - -ALWAYS_DETAILED_SEC = NO - -# If the INLINE_INHERITED_MEMB tag is set to YES, doxygen will show all -# inherited members of a class in the documentation of that class as if those -# members were ordinary class members. Constructors, destructors and assignment -# operators of the base classes will not be shown. - -INLINE_INHERITED_MEMB = NO - -# If the FULL_PATH_NAMES tag is set to YES then Doxygen will prepend the full -# path before files name in the file list and in the header files. If set -# to NO the shortest path that makes the file name unique will be used. - -FULL_PATH_NAMES = YES - -# If the FULL_PATH_NAMES tag is set to YES then the STRIP_FROM_PATH tag -# can be used to strip a user-defined part of the path. Stripping is -# only done if one of the specified strings matches the left-hand part of -# the path. The tag can be used to show relative paths in the file list. -# If left blank the directory from which doxygen is run is used as the -# path to strip. - -STRIP_FROM_PATH = - -# The STRIP_FROM_INC_PATH tag can be used to strip a user-defined part of -# the path mentioned in the documentation of a class, which tells -# the reader which header file to include in order to use a class. -# If left blank only the name of the header file containing the class -# definition is used. Otherwise one should specify the include paths that -# are normally passed to the compiler using the -I flag. - -STRIP_FROM_INC_PATH = - -# If the SHORT_NAMES tag is set to YES, doxygen will generate much shorter -# (but less readable) file names. This can be useful is your file systems -# doesn't support long names like on DOS, Mac, or CD-ROM. - -SHORT_NAMES = NO - -# If the JAVADOC_AUTOBRIEF tag is set to YES then Doxygen -# will interpret the first line (until the first dot) of a JavaDoc-style -# comment as the brief description. If set to NO, the JavaDoc -# comments will behave just like the Qt-style comments (thus requiring an -# explicit @brief command for a brief description. - -JAVADOC_AUTOBRIEF = YES - -# The MULTILINE_CPP_IS_BRIEF tag can be set to YES to make Doxygen -# treat a multi-line C++ special comment block (i.e. a block of //! or /// -# comments) as a brief description. This used to be the default behaviour. -# The new default is to treat a multi-line C++ comment block as a detailed -# description. Set this tag to YES if you prefer the old behaviour instead. - -MULTILINE_CPP_IS_BRIEF = NO - -# If the DETAILS_AT_TOP tag is set to YES then Doxygen -# will output the detailed description near the top, like JavaDoc. -# If set to NO, the detailed description appears after the member -# documentation. - -DETAILS_AT_TOP = YES - -# If the INHERIT_DOCS tag is set to YES (the default) then an undocumented -# member inherits the documentation from any documented member that it -# re-implements. - -INHERIT_DOCS = YES - -# If member grouping is used in the documentation and the DISTRIBUTE_GROUP_DOC -# tag is set to YES, then doxygen will reuse the documentation of the first -# member in the group (if any) for the other members of the group. By default -# all members of a group must be documented explicitly. - -DISTRIBUTE_GROUP_DOC = NO - -# If the SEPARATE_MEMBER_PAGES tag is set to YES, then doxygen will produce -# a new page for each member. If set to NO, the documentation of a member will -# be part of the file/class/namespace that contains it. - -SEPARATE_MEMBER_PAGES = NO - -# The TAB_SIZE tag can be used to set the number of spaces in a tab. -# Doxygen uses this value to replace tabs by spaces in code fragments. - -TAB_SIZE = 8 - -# This tag can be used to specify a number of aliases that acts -# as commands in the documentation. An alias has the form "name=value". -# For example adding "sideeffect=\par Side Effects:\n" will allow you to -# put the command \sideeffect (or @sideeffect) in the documentation, which -# will result in a user-defined paragraph with heading "Side Effects:". -# You can put \n's in the value part of an alias to insert newlines. - -ALIASES = - -# Set the OPTIMIZE_OUTPUT_FOR_C tag to YES if your project consists of C -# sources only. Doxygen will then generate output that is more tailored for C. -# For instance, some of the names that are used will be different. The list -# of all members will be omitted, etc. - -OPTIMIZE_OUTPUT_FOR_C = NO - -# Set the OPTIMIZE_OUTPUT_JAVA tag to YES if your project consists of Java sources -# only. Doxygen will then generate output that is more tailored for Java. -# For instance, namespaces will be presented as packages, qualified scopes -# will look different, etc. - -OPTIMIZE_OUTPUT_JAVA = YES - -# Set the SUBGROUPING tag to YES (the default) to allow class member groups of -# the same type (for instance a group of public functions) to be put as a -# subgroup of that type (e.g. under the Public Functions section). Set it to -# NO to prevent subgrouping. Alternatively, this can be done per class using -# the \nosubgrouping command. - -SUBGROUPING = YES - -#--------------------------------------------------------------------------- -# Build related configuration options -#--------------------------------------------------------------------------- - -# If the EXTRACT_ALL tag is set to YES doxygen will assume all entities in -# documentation are documented, even if no documentation was available. -# Private class members and static file members will be hidden unless -# the EXTRACT_PRIVATE and EXTRACT_STATIC tags are set to YES - -EXTRACT_ALL = YES - -# If the EXTRACT_PRIVATE tag is set to YES all private members of a class -# will be included in the documentation. - -EXTRACT_PRIVATE = YES - -# If the EXTRACT_STATIC tag is set to YES all static members of a file -# will be included in the documentation. - -EXTRACT_STATIC = YES - -# If the EXTRACT_LOCAL_CLASSES tag is set to YES classes (and structs) -# defined locally in source files will be included in the documentation. -# If set to NO only classes defined in header files are included. - -EXTRACT_LOCAL_CLASSES = YES - -# This flag is only useful for Objective-C code. When set to YES local -# methods, which are defined in the implementation section but not in -# the interface are included in the documentation. -# If set to NO (the default) only methods in the interface are included. - -EXTRACT_LOCAL_METHODS = NO - -# If the HIDE_UNDOC_MEMBERS tag is set to YES, Doxygen will hide all -# undocumented members of documented classes, files or namespaces. -# If set to NO (the default) these members will be included in the -# various overviews, but no documentation section is generated. -# This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_MEMBERS = NO - -# If the HIDE_UNDOC_CLASSES tag is set to YES, Doxygen will hide all -# undocumented classes that are normally visible in the class hierarchy. -# If set to NO (the default) these classes will be included in the various -# overviews. This option has no effect if EXTRACT_ALL is enabled. - -HIDE_UNDOC_CLASSES = NO - -# If the HIDE_FRIEND_COMPOUNDS tag is set to YES, Doxygen will hide all -# friend (class|struct|union) declarations. -# If set to NO (the default) these declarations will be included in the -# documentation. - -HIDE_FRIEND_COMPOUNDS = NO - -# If the HIDE_IN_BODY_DOCS tag is set to YES, Doxygen will hide any -# documentation blocks found inside the body of a function. -# If set to NO (the default) these blocks will be appended to the -# function's detailed documentation block. - -HIDE_IN_BODY_DOCS = NO - -# The INTERNAL_DOCS tag determines if documentation -# that is typed after a \internal command is included. If the tag is set -# to NO (the default) then the documentation will be excluded. -# Set it to YES to include the internal documentation. - -INTERNAL_DOCS = NO - -# If the CASE_SENSE_NAMES tag is set to NO then Doxygen will only generate -# file names in lower-case letters. If set to YES upper-case letters are also -# allowed. This is useful if you have classes or files whose names only differ -# in case and if your file system supports case sensitive file names. Windows -# and Mac users are advised to set this option to NO. - -CASE_SENSE_NAMES = YES - -# If the HIDE_SCOPE_NAMES tag is set to NO (the default) then Doxygen -# will show members with their full class and namespace scopes in the -# documentation. If set to YES the scope will be hidden. - -HIDE_SCOPE_NAMES = NO - -# If the SHOW_INCLUDE_FILES tag is set to YES (the default) then Doxygen -# will put a list of the files that are included by a file in the documentation -# of that file. - -SHOW_INCLUDE_FILES = YES - -# If the INLINE_INFO tag is set to YES (the default) then a tag [inline] -# is inserted in the documentation for inline members. - -INLINE_INFO = YES - -# If the SORT_MEMBER_DOCS tag is set to YES (the default) then doxygen -# will sort the (detailed) documentation of file and class members -# alphabetically by member name. If set to NO the members will appear in -# declaration order. - -SORT_MEMBER_DOCS = YES - -# If the SORT_BRIEF_DOCS tag is set to YES then doxygen will sort the -# brief documentation of file, namespace and class members alphabetically -# by member name. If set to NO (the default) the members will appear in -# declaration order. - -SORT_BRIEF_DOCS = NO - -# If the SORT_BY_SCOPE_NAME tag is set to YES, the class list will be -# sorted by fully-qualified names, including namespaces. If set to -# NO (the default), the class list will be sorted only by class name, -# not including the namespace part. -# Note: This option is not very useful if HIDE_SCOPE_NAMES is set to YES. -# Note: This option applies only to the class list, not to the -# alphabetical list. - -SORT_BY_SCOPE_NAME = NO - -# The GENERATE_TODOLIST tag can be used to enable (YES) or -# disable (NO) the todo list. This list is created by putting \todo -# commands in the documentation. - -GENERATE_TODOLIST = YES - -# The GENERATE_TESTLIST tag can be used to enable (YES) or -# disable (NO) the test list. This list is created by putting \test -# commands in the documentation. - -GENERATE_TESTLIST = YES - -# The GENERATE_BUGLIST tag can be used to enable (YES) or -# disable (NO) the bug list. This list is created by putting \bug -# commands in the documentation. - -GENERATE_BUGLIST = YES - -# The GENERATE_DEPRECATEDLIST tag can be used to enable (YES) or -# disable (NO) the deprecated list. This list is created by putting -# \deprecated commands in the documentation. - -GENERATE_DEPRECATEDLIST= YES - -# The ENABLED_SECTIONS tag can be used to enable conditional -# documentation sections, marked by \if sectionname ... \endif. - -ENABLED_SECTIONS = - -# The MAX_INITIALIZER_LINES tag determines the maximum number of lines -# the initial value of a variable or define consists of for it to appear in -# the documentation. If the initializer consists of more lines than specified -# here it will be hidden. Use a value of 0 to hide initializers completely. -# The appearance of the initializer of individual variables and defines in the -# documentation can be controlled using \showinitializer or \hideinitializer -# command in the documentation regardless of this setting. - -MAX_INITIALIZER_LINES = 30 - -# Set the SHOW_USED_FILES tag to NO to disable the list of files generated -# at the bottom of the documentation of classes and structs. If set to YES the -# list will mention the files that were used to generate the documentation. - -SHOW_USED_FILES = YES - -# If the sources in your project are distributed over multiple directories -# then setting the SHOW_DIRECTORIES tag to YES will show the directory hierarchy -# in the documentation. - -SHOW_DIRECTORIES = YES - -# The FILE_VERSION_FILTER tag can be used to specify a program or script that -# doxygen should invoke to get the current version for each file (typically from the -# version control system). Doxygen will invoke the program by executing (via -# popen()) the command <command> <input-file>, where <command> is the value of -# the FILE_VERSION_FILTER tag, and <input-file> is the name of an input file -# provided by doxygen. Whatever the progam writes to standard output -# is used as the file version. See the manual for examples. - -FILE_VERSION_FILTER = - -#--------------------------------------------------------------------------- -# configuration options related to warning and progress messages -#--------------------------------------------------------------------------- - -# The QUIET tag can be used to turn on/off the messages that are generated -# by doxygen. Possible values are YES and NO. If left blank NO is used. - -QUIET = YES - -# The WARNINGS tag can be used to turn on/off the warning messages that are -# generated by doxygen. Possible values are YES and NO. If left blank -# NO is used. - -WARNINGS = YES - -# If WARN_IF_UNDOCUMENTED is set to YES, then doxygen will generate warnings -# for undocumented members. If EXTRACT_ALL is set to YES then this flag will -# automatically be disabled. - -WARN_IF_UNDOCUMENTED = YES - -# If WARN_IF_DOC_ERROR is set to YES, doxygen will generate warnings for -# potential errors in the documentation, such as not documenting some -# parameters in a documented function, or documenting parameters that -# don't exist or using markup commands wrongly. - -WARN_IF_DOC_ERROR = YES - -# This WARN_NO_PARAMDOC option can be abled to get warnings for -# functions that are documented, but have no documentation for their parameters -# or return value. If set to NO (the default) doxygen will only warn about -# wrong or incomplete parameter documentation, but not about the absence of -# documentation. - -WARN_NO_PARAMDOC = NO - -# The WARN_FORMAT tag determines the format of the warning messages that -# doxygen can produce. The string should contain the $file, $line, and $text -# tags, which will be replaced by the file and line number from which the -# warning originated and the warning text. Optionally the format may contain -# $version, which will be replaced by the version of the file (if it could -# be obtained via FILE_VERSION_FILTER) - -WARN_FORMAT = "$file:$line: $text" - -# The WARN_LOGFILE tag can be used to specify a file to which warning -# and error messages should be written. If left blank the output is written -# to stderr. - -WARN_LOGFILE = - -#--------------------------------------------------------------------------- -# configuration options related to the input files -#--------------------------------------------------------------------------- - -# The INPUT tag can be used to specify the files and/or directories that contain -# documented source files. You may enter file names like "myfile.cpp" or -# directories like "/usr/src/myproject". Separate the files or directories -# with spaces. - -INPUT = ../tools/python/xen/ - -# If the value of the INPUT tag contains directories, you can use the -# FILE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank the following patterns are tested: -# *.c *.cc *.cxx *.cpp *.c++ *.java *.ii *.ixx *.ipp *.i++ *.inl *.h *.hh *.hxx -# *.hpp *.h++ *.idl *.odl *.cs *.php *.php3 *.inc *.m *.mm - -FILE_PATTERNS = *.py *.c - -# The RECURSIVE tag can be used to turn specify whether or not subdirectories -# should be searched for input files as well. Possible values are YES and NO. -# If left blank NO is used. - -RECURSIVE = YES - -# The EXCLUDE tag can be used to specify files and/or directories that should -# excluded from the INPUT source files. This way you can easily exclude a -# subdirectory from a directory tree whose root is specified with the INPUT tag. - -EXCLUDE = - -# The EXCLUDE_SYMLINKS tag can be used select whether or not files or -# directories that are symbolic links (a Unix filesystem feature) are excluded -# from the input. - -EXCLUDE_SYMLINKS = NO - -# If the value of the INPUT tag contains directories, you can use the -# EXCLUDE_PATTERNS tag to specify one or more wildcard patterns to exclude -# certain files from those directories. - -EXCLUDE_PATTERNS = - -# The EXAMPLE_PATH tag can be used to specify one or more files or -# directories that contain example code fragments that are included (see -# the \include command). - -EXAMPLE_PATH = - -# If the value of the EXAMPLE_PATH tag contains directories, you can use the -# EXAMPLE_PATTERNS tag to specify one or more wildcard pattern (like *.cpp -# and *.h) to filter out the source-files in the directories. If left -# blank all files are included. - -EXAMPLE_PATTERNS = - -# If the EXAMPLE_RECURSIVE tag is set to YES then subdirectories will be -# searched for input files to be used with the \include or \dontinclude -# commands irrespective of the value of the RECURSIVE tag. -# Possible values are YES and NO. If left blank NO is used. - -EXAMPLE_RECURSIVE = NO - -# The IMAGE_PATH tag can be used to specify one or more files or -# directories that contain image that are included in the documentation (see -# the \image command). - -IMAGE_PATH = - -# The INPUT_FILTER tag can be used to specify a program that doxygen should -# invoke to filter for each input file. Doxygen will invoke the filter program -# by executing (via popen()) the command <filter> <input-file>, where <filter> -# is the value of the INPUT_FILTER tag, and <input-file> is the name of an -# input file. Doxygen will then use the output that the filter program writes -# to standard output. If FILTER_PATTERNS is specified, this tag will be -# ignored. - -INPUT_FILTER = "sh ./Doxyfilter ../tools/python" - -# The FILTER_PATTERNS tag can be used to specify filters on a per file pattern -# basis. Doxygen will compare the file name with each pattern and apply the -# filter if there is a match. The filters are a list of the form: -# pattern=filter (like *.cpp=my_cpp_filter). See INPUT_FILTER for further -# info on how filters are used. If FILTER_PATTERNS is empty, INPUT_FILTER -# is applied to all files. - -FILTER_PATTERNS = - -# If the FILTER_SOURCE_FILES tag is set to YES, the input filter (if set using -# INPUT_FILTER) will be used to filter the input files when producing source -# files to browse (i.e. when SOURCE_BROWSER is set to YES). - -FILTER_SOURCE_FILES = YES - -#--------------------------------------------------------------------------- -# configuration options related to source browsing -#--------------------------------------------------------------------------- - -# If the SOURCE_BROWSER tag is set to YES then a list of source files will -# be generated. Documented entities will be cross-referenced with these sources. -# Note: To get rid of all source code in the generated output, make sure also -# VERBATIM_HEADERS is set to NO. - -SOURCE_BROWSER = NO - -# Setting the INLINE_SOURCES tag to YES will include the body -# of functions and classes directly in the documentation. - -INLINE_SOURCES = NO - -# Setting the STRIP_CODE_COMMENTS tag to YES (the default) will instruct -# doxygen to hide any special comment blocks from generated source code -# fragments. Normal C and C++ comments will always remain visible. - -STRIP_CODE_COMMENTS = YES - -# If the REFERENCED_BY_RELATION tag is set to YES (the default) -# then for each documented function all documented -# functions referencing it will be listed. - -REFERENCED_BY_RELATION = YES - -# If the REFERENCES_RELATION tag is set to YES (the default) -# then for each documented function all documented entities -# called/used by that function will be listed. - -REFERENCES_RELATION = YES - -# If the VERBATIM_HEADERS tag is set to YES (the default) then Doxygen -# will generate a verbatim copy of the header file for each class for -# which an include is specified. Set to NO to disable this. - -VERBATIM_HEADERS = YES - -#--------------------------------------------------------------------------- -# configuration options related to the alphabetical class index -#--------------------------------------------------------------------------- - -# If the ALPHABETICAL_INDEX tag is set to YES, an alphabetical index -# of all compounds will be generated. Enable this if the project -# contains a lot of classes, structs, unions or interfaces. - -ALPHABETICAL_INDEX = NO - -# If the alphabetical index is enabled (see ALPHABETICAL_INDEX) then -# the COLS_IN_ALPHA_INDEX tag can be used to specify the number of columns -# in which this list will be split (can be a number in the range [1..20]) - -COLS_IN_ALPHA_INDEX = 5 - -# In case all classes in a project start with a common prefix, all -# classes will be put under the same header in the alphabetical index. -# The IGNORE_PREFIX tag can be used to specify one or more prefixes that -# should be ignored while generating the index headers. - -IGNORE_PREFIX = - -#--------------------------------------------------------------------------- -# configuration options related to the HTML output -#--------------------------------------------------------------------------- - -# If the GENERATE_HTML tag is set to YES (the default) Doxygen will -# generate HTML output. - -GENERATE_HTML = YES - -# The HTML_OUTPUT tag is used to specify where the HTML docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `html' will be used as the default path. - -HTML_OUTPUT = html - -# The HTML_FILE_EXTENSION tag can be used to specify the file extension for -# each generated HTML page (for example: .htm,.php,.asp). If it is left blank -# doxygen will generate files with .html extension. - -HTML_FILE_EXTENSION = .html - -# The HTML_HEADER tag can be used to specify a personal HTML header for -# each generated HTML page. If it is left blank doxygen will generate a -# standard header. - -HTML_HEADER = - -# The HTML_FOOTER tag can be used to specify a personal HTML footer for -# each generated HTML page. If it is left blank doxygen will generate a -# standard footer. - -HTML_FOOTER = - -# The HTML_STYLESHEET tag can be used to specify a user-defined cascading -# style sheet that is used by each HTML page. It can be used to -# fine-tune the look of the HTML output. If the tag is left blank doxygen -# will generate a default style sheet. Note that doxygen will try to copy -# the style sheet file to the HTML output directory, so don't put your own -# stylesheet in the HTML output directory as well, or it will be erased! - -HTML_STYLESHEET = - -# If the HTML_ALIGN_MEMBERS tag is set to YES, the members of classes, -# files or namespaces will be aligned in HTML using tables. If set to -# NO a bullet list will be used. - -HTML_ALIGN_MEMBERS = YES - -# If the GENERATE_HTMLHELP tag is set to YES, additional index files -# will be generated that can be used as input for tools like the -# Microsoft HTML help workshop to generate a compressed HTML help file (.chm) -# of the generated HTML documentation. - -GENERATE_HTMLHELP = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the CHM_FILE tag can -# be used to specify the file name of the resulting .chm file. You -# can add a path in front of the file if the result should not be -# written to the html output directory. - -CHM_FILE = - -# If the GENERATE_HTMLHELP tag is set to YES, the HHC_LOCATION tag can -# be used to specify the location (absolute path including file name) of -# the HTML help compiler (hhc.exe). If non-empty doxygen will try to run -# the HTML help compiler on the generated index.hhp. - -HHC_LOCATION = - -# If the GENERATE_HTMLHELP tag is set to YES, the GENERATE_CHI flag -# controls if a separate .chi index file is generated (YES) or that -# it should be included in the master .chm file (NO). - -GENERATE_CHI = NO - -# If the GENERATE_HTMLHELP tag is set to YES, the BINARY_TOC flag -# controls whether a binary table of contents is generated (YES) or a -# normal table of contents (NO) in the .chm file. - -BINARY_TOC = NO - -# The TOC_EXPAND flag can be set to YES to add extra items for group members -# to the contents of the HTML help documentation and to the tree view. - -TOC_EXPAND = NO - -# The DISABLE_INDEX tag can be used to turn on/off the condensed index at -# top of each HTML page. The value NO (the default) enables the index and -# the value YES disables it. - -DISABLE_INDEX = NO - -# This tag can be used to set the number of enum values (range [1..20]) -# that doxygen will group on one line in the generated HTML documentation. - -ENUM_VALUES_PER_LINE = 4 - -# If the GENERATE_TREEVIEW tag is set to YES, a side panel will be -# generated containing a tree-like index structure (just like the one that -# is generated for HTML Help). For this to work a browser that supports -# JavaScript, DHTML, CSS and frames is required (for instance Mozilla 1.0+, -# Netscape 6.0+, Internet explorer 5.0+, or Konqueror). Windows users are -# probably better off using the HTML help feature. - -GENERATE_TREEVIEW = NO - -# If the treeview is enabled (see GENERATE_TREEVIEW) then this tag can be -# used to set the initial width (in pixels) of the frame in which the tree -# is shown. - -TREEVIEW_WIDTH = 250 - -#--------------------------------------------------------------------------- -# configuration options related to the LaTeX output -#--------------------------------------------------------------------------- - -# If the GENERATE_LATEX tag is set to YES (the default) Doxygen will -# generate Latex output. - -GENERATE_LATEX = YES - -# The LATEX_OUTPUT tag is used to specify where the LaTeX docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `latex' will be used as the default path. - -LATEX_OUTPUT = latex - -# The LATEX_CMD_NAME tag can be used to specify the LaTeX command name to be -# invoked. If left blank `latex' will be used as the default command name. - -LATEX_CMD_NAME = latex - -# The MAKEINDEX_CMD_NAME tag can be used to specify the command name to -# generate index for LaTeX. If left blank `makeindex' will be used as the -# default command name. - -MAKEINDEX_CMD_NAME = makeindex - -# If the COMPACT_LATEX tag is set to YES Doxygen generates more compact -# LaTeX documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_LATEX = NO - -# The PAPER_TYPE tag can be used to set the paper type that is used -# by the printer. Possible values are: a4, a4wide, letter, legal and -# executive. If left blank a4wide will be used. - -PAPER_TYPE = a4 - -# The EXTRA_PACKAGES tag can be to specify one or more names of LaTeX -# packages that should be included in the LaTeX output. - -EXTRA_PACKAGES = - -# The LATEX_HEADER tag can be used to specify a personal LaTeX header for -# the generated latex document. The header should contain everything until -# the first chapter. If it is left blank doxygen will generate a -# standard header. Notice: only use this tag if you know what you are doing! - -LATEX_HEADER = - -# If the PDF_HYPERLINKS tag is set to YES, the LaTeX that is generated -# is prepared for conversion to pdf (using ps2pdf). The pdf file will -# contain links (just like the HTML output) instead of page references -# This makes the output suitable for online browsing using a pdf viewer. - -PDF_HYPERLINKS = YES - -# If the USE_PDFLATEX tag is set to YES, pdflatex will be used instead of -# plain latex in the generated Makefile. Set this option to YES to get a -# higher quality PDF documentation. - -USE_PDFLATEX = YES - -# If the LATEX_BATCHMODE tag is set to YES, doxygen will add the \\batchmode. -# command to the generated LaTeX files. This will instruct LaTeX to keep -# running if errors occur, instead of asking the user for help. -# This option is also used when generating formulas in HTML. - -LATEX_BATCHMODE = NO - -# If LATEX_HIDE_INDICES is set to YES then doxygen will not -# include the index chapters (such as File Index, Compound Index, etc.) -# in the output. - -LATEX_HIDE_INDICES = NO - -#--------------------------------------------------------------------------- -# configuration options related to the RTF output -#--------------------------------------------------------------------------- - -# If the GENERATE_RTF tag is set to YES Doxygen will generate RTF output -# The RTF output is optimized for Word 97 and may not look very pretty with -# other RTF readers or editors. - -GENERATE_RTF = NO - -# The RTF_OUTPUT tag is used to specify where the RTF docs will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `rtf' will be used as the default path. - -RTF_OUTPUT = rtf - -# If the COMPACT_RTF tag is set to YES Doxygen generates more compact -# RTF documents. This may be useful for small projects and may help to -# save some trees in general. - -COMPACT_RTF = NO - -# If the RTF_HYPERLINKS tag is set to YES, the RTF that is generated -# will contain hyperlink fields. The RTF file will -# contain links (just like the HTML output) instead of page references. -# This makes the output suitable for online browsing using WORD or other -# programs which support those fields. -# Note: wordpad (write) and others do not support links. - -RTF_HYPERLINKS = NO - -# Load stylesheet definitions from file. Syntax is similar to doxygen's -# config file, i.e. a series of assignments. You only have to provide -# replacements, missing definitions are set to their default value. - -RTF_STYLESHEET_FILE = - -# Set optional variables used in the generation of an rtf document. -# Syntax is similar to doxygen's config file. - -RTF_EXTENSIONS_FILE = - -#--------------------------------------------------------------------------- -# configuration options related to the man page output -#--------------------------------------------------------------------------- - -# If the GENERATE_MAN tag is set to YES (the default) Doxygen will -# generate man pages - -GENERATE_MAN = NO - -# The MAN_OUTPUT tag is used to specify where the man pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `man' will be used as the default path. - -MAN_OUTPUT = man - -# The MAN_EXTENSION tag determines the extension that is added to -# the generated man pages (default is the subroutine's section .3) - -MAN_EXTENSION = .3 - -# If the MAN_LINKS tag is set to YES and Doxygen generates man output, -# then it will generate one additional man file for each entity -# documented in the real man page(s). These additional files -# only source the real man page, but without them the man command -# would be unable to find the correct page. The default is NO. - -MAN_LINKS = NO - -#--------------------------------------------------------------------------- -# configuration options related to the XML output -#--------------------------------------------------------------------------- - -# If the GENERATE_XML tag is set to YES Doxygen will -# generate an XML file that captures the structure of -# the code including all documentation. - -GENERATE_XML = NO - -# The XML_OUTPUT tag is used to specify where the XML pages will be put. -# If a relative path is entered the value of OUTPUT_DIRECTORY will be -# put in front of it. If left blank `xml' will be used as the default path. - -XML_OUTPUT = xml - -# The XML_SCHEMA tag can be used to specify an XML schema, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_SCHEMA = - -# The XML_DTD tag can be used to specify an XML DTD, -# which can be used by a validating XML parser to check the -# syntax of the XML files. - -XML_DTD = - -# If the XML_PROGRAMLISTING tag is set to YES Doxygen will -# dump the program listings (including syntax highlighting -# and cross-referencing information) to the XML output. Note that -# enabling this will significantly increase the size of the XML output. - -XML_PROGRAMLISTING = YES - -#--------------------------------------------------------------------------- -# configuration options for the AutoGen Definitions output -#--------------------------------------------------------------------------- - -# If the GENERATE_AUTOGEN_DEF tag is set to YES Doxygen will -# generate an AutoGen Definitions (see autogen.sf.net) file -# that captures the structure of the code including all -# documentation. Note that this feature is still experimental -# and incomplete at the moment. - -GENERATE_AUTOGEN_DEF = NO - -#--------------------------------------------------------------------------- -# configuration options related to the Perl module output -#--------------------------------------------------------------------------- - -# If the GENERATE_PERLMOD tag is set to YES Doxygen will -# generate a Perl module file that captures the structure of -# the code including all documentation. Note that this -# feature is still experimental and incomplete at the -# moment. - -GENERATE_PERLMOD = NO - -# If the PERLMOD_LATEX tag is set to YES Doxygen will generate -# the necessary Makefile rules, Perl scripts and LaTeX code to be able -# to generate PDF and DVI output from the Perl module output. - -PERLMOD_LATEX = NO - -# If the PERLMOD_PRETTY tag is set to YES the Perl module output will be -# nicely formatted so it can be parsed by a human reader. This is useful -# if you want to understand what is going on. On the other hand, if this -# tag is set to NO the size of the Perl module output will be much smaller -# and Perl will parse it just the same. - -PERLMOD_PRETTY = YES - -# The names of the make variables in the generated doxyrules.make file -# are prefixed with the string contained in PERLMOD_MAKEVAR_PREFIX. -# This is useful so different doxyrules.make files included by the same -# Makefile don't overwrite each other's variables. - -PERLMOD_MAKEVAR_PREFIX = - -#--------------------------------------------------------------------------- -# Configuration options related to the preprocessor -#--------------------------------------------------------------------------- - -# If the ENABLE_PREPROCESSING tag is set to YES (the default) Doxygen will -# evaluate all C-preprocessor directives found in the sources and include -# files. - -ENABLE_PREPROCESSING = YES - -# If the MACRO_EXPANSION tag is set to YES Doxygen will expand all macro -# names in the source code. If set to NO (the default) only conditional -# compilation will be performed. Macro expansion can be done in a controlled -# way by setting EXPAND_ONLY_PREDEF to YES. - -MACRO_EXPANSION = NO - -# If the EXPAND_ONLY_PREDEF and MACRO_EXPANSION tags are both set to YES -# then the macro expansion is limited to the macros specified with the -# PREDEFINED and EXPAND_AS_PREDEFINED tags. - -EXPAND_ONLY_PREDEF = NO - -# If the SEARCH_INCLUDES tag is set to YES (the default) the includes files -# in the INCLUDE_PATH (see below) will be search if a #include is found. - -SEARCH_INCLUDES = YES - -# The INCLUDE_PATH tag can be used to specify one or more directories that -# contain include files that are not input files but should be processed by -# the preprocessor. - -INCLUDE_PATH = - -# You can use the INCLUDE_FILE_PATTERNS tag to specify one or more wildcard -# patterns (like *.h and *.hpp) to filter out the header-files in the -# directories. If left blank, the patterns specified with FILE_PATTERNS will -# be used. - -INCLUDE_FILE_PATTERNS = - -# The PREDEFINED tag can be used to specify one or more macro names that -# are defined before the preprocessor is started (similar to the -D option of -# gcc). The argument of the tag is a list of macros of the form: name -# or name=definition (no spaces). If the definition and the = are -# omitted =1 is assumed. To prevent a macro definition from being -# undefined via #undef or recursively expanded use the := operator -# instead of the = operator. - -PREDEFINED = - -# If the MACRO_EXPANSION and EXPAND_ONLY_PREDEF tags are set to YES then -# this tag can be used to specify a list of macro names that should be expanded. -# The macro definition that is found in the sources will be used. -# Use the PREDEFINED tag if you want to use a different macro definition. - -EXPAND_AS_DEFINED = - -# If the SKIP_FUNCTION_MACROS tag is set to YES (the default) then -# doxygen's preprocessor will remove all function-like macros that are alone -# on a line, have an all uppercase name, and do not end with a semicolon. Such -# function macros are typically used for boiler-plate code, and will confuse -# the parser if not removed. - -SKIP_FUNCTION_MACROS = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to external references -#--------------------------------------------------------------------------- - -# The TAGFILES option can be used to specify one or more tagfiles. -# Optionally an initial location of the external documentation -# can be added for each tagfile. The format of a tag file without -# this location is as follows: -# TAGFILES = file1 file2 ... -# Adding location for the tag files is done as follows: -# TAGFILES = file1=loc1 "file2 = loc2" ... -# where "loc1" and "loc2" can be relative or absolute paths or -# URLs. If a location is present for each tag, the installdox tool -# does not have to be run to correct the links. -# Note that each tag file must have a unique name -# (where the name does NOT include the path) -# If a tag file is not located in the directory in which doxygen -# is run, you must also specify the path to the tagfile here. - -TAGFILES = - -# When a file name is specified after GENERATE_TAGFILE, doxygen will create -# a tag file that is based on the input files it reads. - -GENERATE_TAGFILE = - -# If the ALLEXTERNALS tag is set to YES all external classes will be listed -# in the class index. If set to NO only the inherited external classes -# will be listed. - -ALLEXTERNALS = NO - -# If the EXTERNAL_GROUPS tag is set to YES all external groups will be listed -# in the modules index. If set to NO, only the current project's groups will -# be listed. - -EXTERNAL_GROUPS = YES - -# The PERL_PATH should be the absolute path and name of the perl script -# interpreter (i.e. the result of `which perl'). - -PERL_PATH = /usr/bin/perl - -#--------------------------------------------------------------------------- -# Configuration options related to the dot tool -#--------------------------------------------------------------------------- - -# If the CLASS_DIAGRAMS tag is set to YES (the default) Doxygen will -# generate a inheritance diagram (in HTML, RTF and LaTeX) for classes with base -# or super classes. Setting the tag to NO turns the diagrams off. Note that -# this option is superseded by the HAVE_DOT option below. This is only a -# fallback. It is recommended to install and use dot, since it yields more -# powerful graphs. - -CLASS_DIAGRAMS = YES - -# If set to YES, the inheritance and collaboration graphs will hide -# inheritance and usage relations if the target is undocumented -# or is not a class. - -HIDE_UNDOC_RELATIONS = YES - -# If you set the HAVE_DOT tag to YES then doxygen will assume the dot tool is -# available from the path. This tool is part of Graphviz, a graph visualization -# toolkit from AT&T and Lucent Bell Labs. The other options in this section -# have no effect if this option is set to NO (the default) - -HAVE_DOT = NO - -# If the CLASS_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect inheritance relations. Setting this tag to YES will force the -# the CLASS_DIAGRAMS tag to NO. - -CLASS_GRAPH = YES - -# If the COLLABORATION_GRAPH and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for each documented class showing the direct and -# indirect implementation dependencies (inheritance, containment, and -# class references variables) of the class with other documented classes. - -COLLABORATION_GRAPH = YES - -# If the GROUP_GRAPHS and HAVE_DOT tags are set to YES then doxygen -# will generate a graph for groups, showing the direct groups dependencies - -GROUP_GRAPHS = YES - -# If the UML_LOOK tag is set to YES doxygen will generate inheritance and -# collaboration diagrams in a style similar to the OMG's Unified Modeling -# Language. - -UML_LOOK = NO - -# If set to YES, the inheritance and collaboration graphs will show the -# relations between templates and their instances. - -TEMPLATE_RELATIONS = NO - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDE_GRAPH, and HAVE_DOT -# tags are set to YES then doxygen will generate a graph for each documented -# file showing the direct and indirect include dependencies of the file with -# other documented files. - -INCLUDE_GRAPH = YES - -# If the ENABLE_PREPROCESSING, SEARCH_INCLUDES, INCLUDED_BY_GRAPH, and -# HAVE_DOT tags are set to YES then doxygen will generate a graph for each -# documented header file showing the documented files that directly or -# indirectly include this file. - -INCLUDED_BY_GRAPH = YES - -# If the CALL_GRAPH and HAVE_DOT tags are set to YES then doxygen will -# generate a call dependency graph for every global function or class method. -# Note that enabling this option will significantly increase the time of a run. -# So in most cases it will be better to enable call graphs for selected -# functions only using the \callgraph command. - -CALL_GRAPH = NO - -# If the GRAPHICAL_HIERARCHY and HAVE_DOT tags are set to YES then doxygen -# will graphical hierarchy of all classes instead of a textual one. - -GRAPHICAL_HIERARCHY = YES - -# If the DIRECTORY_GRAPH, SHOW_DIRECTORIES and HAVE_DOT tags are set to YES -# then doxygen will show the dependencies a directory has on other directories -# in a graphical way. The dependency relations are determined by the #include -# relations between the files in the directories. - -DIRECTORY_GRAPH = YES - -# The DOT_IMAGE_FORMAT tag can be used to set the image format of the images -# generated by dot. Possible values are png, jpg, or gif -# If left blank png will be used. - -DOT_IMAGE_FORMAT = png - -# The tag DOT_PATH can be used to specify the path where the dot tool can be -# found. If left blank, it is assumed the dot tool can be found in the path. - -DOT_PATH = - -# The DOTFILE_DIRS tag can be used to specify one or more directories that -# contain dot files that are included in the documentation (see the -# \dotfile command). - -DOTFILE_DIRS = - -# The MAX_DOT_GRAPH_WIDTH tag can be used to set the maximum allowed width -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_WIDTH = 1024 - -# The MAX_DOT_GRAPH_HEIGHT tag can be used to set the maximum allows height -# (in pixels) of the graphs generated by dot. If a graph becomes larger than -# this value, doxygen will try to truncate the graph, so that it fits within -# the specified constraint. Beware that most browsers cannot cope with very -# large images. - -MAX_DOT_GRAPH_HEIGHT = 1024 - -# The MAX_DOT_GRAPH_DEPTH tag can be used to set the maximum depth of the -# graphs generated by dot. A depth value of 3 means that only nodes reachable -# from the root by following a path via at most 3 edges will be shown. Nodes -# that lay further from the root node will be omitted. Note that setting this -# option to 1 or 2 may greatly reduce the computation time needed for large -# code bases. Also note that a graph may be further truncated if the graph's -# image dimensions are not sufficient to fit the graph (see MAX_DOT_GRAPH_WIDTH -# and MAX_DOT_GRAPH_HEIGHT). If 0 is used for the depth value (the default), -# the graph is not depth-constrained. - -MAX_DOT_GRAPH_DEPTH = 0 - -# Set the DOT_TRANSPARENT tag to YES to generate images with a transparent -# background. This is disabled by default, which results in a white background. -# Warning: Depending on the platform used, enabling this option may lead to -# badly anti-aliased labels on the edges of a graph (i.e. they become hard to -# read). - -DOT_TRANSPARENT = NO - -# Set the DOT_MULTI_TARGETS tag to YES allow dot to generate multiple output -# files in one run (i.e. multiple -o and -T options on the command line). This -# makes dot run faster, but since only newer versions of dot (>1.8.10) -# support this, this feature is disabled by default. - -DOT_MULTI_TARGETS = NO - -# If the GENERATE_LEGEND tag is set to YES (the default) Doxygen will -# generate a legend page explaining the meaning of the various boxes and -# arrows in the dot generated graphs. - -GENERATE_LEGEND = YES - -# If the DOT_CLEANUP tag is set to YES (the default) Doxygen will -# remove the intermediate dot files that are used to generate -# the various graphs. - -DOT_CLEANUP = YES - -#--------------------------------------------------------------------------- -# Configuration::additions related to the search engine -#--------------------------------------------------------------------------- - -# The SEARCHENGINE tag specifies whether or not a search engine should be -# used. If set to NO the values of all tags below this one will be ignored. - -SEARCHENGINE = NO diff --git a/docs/Doxyfilter b/docs/Doxyfilter deleted file mode 100644 index 6a6d50f..0000000 --- a/docs/Doxyfilter +++ /dev/null @@ -1,16 +0,0 @@ -#!/bin/sh - -# -# Doxyfilter <source-root> <filename> -# - -dir=$(dirname "$0") - -PYFILTER="$dir/pythfilter.py" - -if [ "${2/.py/}" != "$2" ] -then - python "$PYFILTER" -r "$1" -f "$2" -else - cat "$2" -fi diff --git a/docs/Makefile b/docs/Makefile index 620a296..053d7af 100644 --- a/docs/Makefile +++ b/docs/Makefile @@ -27,9 +27,6 @@ all: build .PHONY: build build: html txt man-pages figs -.PHONY: dev-docs -dev-docs: python-dev-docs - .PHONY: html html: $(DOC_HTML) html/index.html @@ -45,15 +42,6 @@ figs: set -x; $(MAKE) -C figs ; else \ echo "fig2dev (transfig) not installed; skipping figs."; fi -.PHONY: python-dev-docs -python-dev-docs: - @mkdir -v -p api/tools/python - @set -e ; if which $(DOXYGEN) 1>/dev/null 2>/dev/null; then \ - echo "Running doxygen to generate Python tools APIs ... "; \ - $(DOXYGEN) Doxyfile; \ - $(MAKE) -C api/tools/python/latex ; else \ - echo "Doxygen not installed; skipping python-dev-docs."; fi - .PHONY: man-pages man-pages: @if which $(POD2MAN) 1>/dev/null 2>/dev/null; then \ @@ -76,7 +64,6 @@ clean: rm -rf .word_count *.aux *.dvi *.bbl *.blg *.glo *.idx *~ rm -rf *.ilg *.log *.ind *.toc *.bak core rm -rf html txt - rm -rf api rm -rf man5 rm -rf man1 diff --git a/docs/html.sty b/docs/html.sty deleted file mode 100644 index b5f8fbb..0000000 --- a/docs/html.sty +++ /dev/null @@ -1,887 +0,0 @@ -% -% $Id: html.sty,v 1.23 1998/02/26 10:32:24 latex2html Exp $ -% LaTeX2HTML Version 96.2 : html.sty -% -% This file contains definitions of LaTeX commands which are -% processed in a special way by the translator. -% For example, there are commands for embedding external hypertext links, -% for cross-references between documents or for including raw HTML. -% This file includes the comments.sty file v2.0 by Victor Eijkhout -% In most cases these commands do nothing when processed by LaTeX. -% -% Place this file in a directory accessible to LaTeX (i.e., somewhere -% in the TEXINPUTS path.) -% -% NOTE: This file works with LaTeX 2.09 or (the newer) LaTeX2e. -% If you only have LaTeX 2.09, some complex LaTeX2HTML features -% like support for segmented documents are not available. - -% Changes: -% See the change log at end of file. - - -% Exit if the style file is already loaded -% (suggested by Lee Shombert <las@xxxxxxxxxxxxxxxxxxxxxx> -\ifx \htmlstyloaded\relax \endinput\else\let\htmlstyloaded\relax\fi -\makeatletter - -\providecommand{\latextohtml}{\LaTeX2\texttt{HTML}} - - -%%% LINKS TO EXTERNAL DOCUMENTS -% -% This can be used to provide links to arbitrary documents. -% The first argumment should be the text that is going to be -% highlighted and the second argument a URL. -% The hyperlink will appear as a hyperlink in the HTML -% document and as a footnote in the dvi or ps files. -% -\newcommand{\htmladdnormallinkfoot}[2]{#1\footnote{#2}} - - -% This is an alternative definition of the command above which -% will ignore the URL in the dvi or ps files. -\newcommand{\htmladdnormallink}[2]{#1} - - -% This command takes as argument a URL pointing to an image. -% The image will be embedded in the HTML document but will -% be ignored in the dvi and ps files. -% -\newcommand{\htmladdimg}[1]{} - - -%%% CROSS-REFERENCES BETWEEN (LOCAL OR REMOTE) DOCUMENTS -% -% This can be used to refer to symbolic labels in other Latex -% documents that have already been processed by the translator. -% The arguments should be: -% #1 : the URL to the directory containing the external document -% #2 : the path to the labels.pl file of the external document. -% If the external document lives on a remote machine then labels.pl -% must be copied on the local machine. -% -%e.g. \externallabels{http://cbl.leeds.ac.uk/nikos/WWW/doc/tex2html/latex2html} -% {/usr/cblelca/nikos/tmp/labels.pl} -% The arguments are ignored in the dvi and ps files. -% -\newcommand{\externallabels}[2]{} - - -% This complements the \externallabels command above. The argument -% should be a label defined in another latex document and will be -% ignored in the dvi and ps files. -% -\newcommand{\externalref}[1]{} - - -% Suggested by Uffe Engberg (http://www.brics.dk/~engberg/) -% This allows the same effect for citations in external bibliographies. -% An \externallabels command must be given, locating a labels.pl file -% which defines the location and keys used in the external .html file. -% -\newcommand{\externalcite}{\nocite} - - -%%% HTMLRULE -% This command adds a horizontal rule and is valid even within -% a figure caption. -% Here we introduce a stub for compatibility. -\newcommand{\htmlrule}{\protect\HTMLrule} -\newcommand{\HTMLrule}{\@ifstar\htmlrulestar\htmlrulestar} -\newcommand{\htmlrulestar}[1]{} - -% This command adds information within the <BODY> ... </BODY> tag -% -\newcommand{\bodytext}[1]{} -\newcommand{\htmlbody}{} - - -%%% HYPERREF -% Suggested by Eric M. Carol <eric@xxxxxxxxxxxxxxxxxxxxx> -% Similar to \ref but accepts conditional text. -% The first argument is HTML text which will become ``hyperized'' -% (underlined). -% The second and third arguments are text which will appear only in the paper -% version (DVI file), enclosing the fourth argument which is a reference to a label. -% -%e.g. \hyperref{using the tracer}{using the tracer (see Section}{)}{trace} -% where there is a corresponding \label{trace} -% -\newcommand{\hyperref}{\hyperrefx[ref]} -\def\hyperrefx[#1]{{\def\next{#1}% - \def\tmp{ref}\ifx\next\tmp\aftergroup\hyperrefref - \else\def\tmp{pageref}\ifx\next\tmp\aftergroup\hyperpageref - \else\def\tmp{page}\ifx\next\tmp\aftergroup\hyperpageref - \else\def\tmp{noref}\ifx\next\tmp\aftergroup\hypernoref - \else\def\tmp{no}\ifx\next\tmp\aftergroup\hypernoref - \else\typeout{*** unknown option \next\space to hyperref ***}% - \fi\fi\fi\fi\fi}} -\newcommand{\hyperrefref}[4]{#2\ref{#4}#3} -\newcommand{\hyperpageref}[4]{#2\pageref{#4}#3} -\newcommand{\hypernoref}[3]{#2} - - -%%% HYPERCITE --- added by RRM -% Suggested by Stephen Simpson <simpson@xxxxxxxxxxxx> -% effects the same ideas as in \hyperref, but for citations. -% It does not allow an optional argument to the \cite, in LaTeX. -% -% \hypercite{<html-text>}{<LaTeX-text>}{<opt-text>}{<key>} -% -% uses the pre/post-texts in LaTeX, with a \cite{<key>} -% -% \hypercite[ext]{<html-text>}{<LaTeX-text>}{<key>} -% -% uses the pre/post-texts in LaTeX, with a \nocite{<key>} -% the actual reference comes from an \externallabels file. -% -\newcommand{\hypercite}{\hypercitex[int]} -\def\hypercitex[#1]{{\def\next{#1}% - \def\tmp{int}\ifx\next\tmp\aftergroup\hyperciteint - \else\def\tmp{cite}\ifx\next\tmp\aftergroup\hyperciteint - \else\def\tmp{ext}\ifx\next\tmp\aftergroup\hyperciteext - \else\def\tmp{nocite}\ifx\next\tmp\aftergroup\hyperciteext - \else\def\tmp{no}\ifx\next\tmp\aftergroup\hyperciteext - \else\typeout{*** unknown option \next\space to hypercite ***}% - \fi\fi\fi\fi\fi}} -\newcommand{\hyperciteint}[4]{#2{\def\tmp{#3}\def\emptyopt{}% - \ifx\tmp\emptyopt\cite{#4}\else\cite[#3]{#4}\fi}} -\newcommand{\hyperciteext}[3]{#2\nocite{#3}} - - - -%%% HTMLREF -% Reference in HTML version only. -% Mix between \htmladdnormallink and \hyperref. -% First arg is text for in both versions, second is label for use in HTML -% version. -\newcommand{\htmlref}[2]{#1} - -%%% HTMLCITE -% Reference in HTML version only. -% Mix between \htmladdnormallink and \hypercite. -% First arg is text for in both versions, second is citation for use in HTML -% version. -\newcommand{\htmlcite}[2]{#1} - - -%%% HTMLIMAGE -% This command can be used inside any environment that is converted -% into an inlined image (eg a "figure" environment) in order to change -% the way the image will be translated. The argument of \htmlimage -% is really a string of options separated by commas ie -% [scale=<scale factor>],[external],[thumbnail=<reduction factor> -% The scale option allows control over the size of the final image. -% The ``external'' option will cause the image not to be inlined -% (images are inlined by default). External images will be accessible -% via a hypertext link. -% The ``thumbnail'' option will cause a small inlined image to be -% placed in the caption. The size of the thumbnail depends on the -% reduction factor. The use of the ``thumbnail'' option implies -% the ``external'' option. -% -% Example: -% \htmlimage{scale=1.5,external,thumbnail=0.2} -% will cause a small thumbnail image 1/5th of the original size to be -% placed in the final document, pointing to an external image 1.5 -% times bigger than the original. -% -\newcommand{\htmlimage}[1]{} - - -% \htmlborder causes a border to be placed around an image or table -% when the image is placed within a <TABLE> cell. -\newcommand{\htmlborder}[1]{} - -% Put \begin{makeimage}, \end{makeimage} around LaTeX to ensure its -% translation into an image. -% This shields sensitive text from being translated. -\newenvironment{makeimage}{}{} - - -% A dummy environment that can be useful to alter the order -% in which commands are processed, in LaTeX2HTML -\newenvironment{tex2html_deferred}{}{} - - -%%% HTMLADDTONAVIGATION -% This command appends its argument to the buttons in the navigation -% panel. It is ignored by LaTeX. -% -% Example: -% \htmladdtonavigation{\htmladdnormallink -% {\htmladdimg{http://server/path/to/gif}} -% {http://server/path}} -\newcommand{\htmladdtonavigation}[1]{} - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% Comment.sty version 2.0, 19 June 1992 -% selectively in/exclude pieces of text: the user can define new -% comment versions, and each is controlled separately. -% This style can be used with plain TeX or LaTeX, and probably -% most other packages too. -% -% Examples of use in LaTeX and TeX follow \endinput -% -% Author -% Victor Eijkhout -% Department of Computer Science -% University Tennessee at Knoxville -% 104 Ayres Hall -% Knoxville, TN 37996 -% USA -% -% eijkhout@xxxxxxxxxx -% -% Usage: all text included in between -% \comment ... \endcomment -% or \begin{comment} ... \end{comment} -% is discarded. The closing command should appear on a line -% of its own. No starting spaces, nothing after it. -% This environment should work with arbitrary amounts -% of comment. -% -% Other 'comment' environments are defined by -% and are selected/deselected with -% \includecomment{versiona} -% \excludecoment{versionb} -% -% These environments are used as -% \versiona ... \endversiona -% or \begin{versiona} ... \end{versiona} -% with the closing command again on a line of its own. -% -% Basic approach: -% to comment something out, scoop up every line in verbatim mode -% as macro argument, then throw it away. -% For inclusions, both the opening and closing comands -% are defined as noop -% -% Changed \next to \html@next to prevent clashes with other sty files -% (mike@xxxxxx) -% Changed \html@next to \htmlnext so the \makeatletter and -% \makeatother commands could be removed (they were causing other -% style files - changebar.sty - to crash) (nikos@xxxxxxxxxxxxxxx) -% Changed \htmlnext back to \html@xxxxxxx - -\def\makeinnocent#1{\catcode`#1=12 } -\def\csarg#1#2{\expandafter#1\csname#2\endcsname} - -\def\ThrowAwayComment#1{\begingroup - \def\CurrentComment{#1}% - \let\do\makeinnocent \dospecials - \makeinnocent\^^L% and whatever other special cases - \endlinechar`\^^M \catcode`\^^M=12 \xComment} -{\catcode`\^^M=12 \endlinechar=-1 % - \gdef\xComment#1^^M{\def\test{#1}\edef\test{\meaning\test} - \csarg\ifx{PlainEnd\CurrentComment Test}\test - \let\html@next\endgroup - \else \csarg\ifx{LaLaEnd\CurrentComment Test}\test - \edef\html@next{\endgroup\noexpand\end{\CurrentComment}} - \else \csarg\ifx{LaInnEnd\CurrentComment Test}\test - \edef\html@next{\endgroup\noexpand\end{\CurrentComment}} - \else \let\html@next\xComment - \fi \fi \fi \html@next} -} - -\def\includecomment - #1{\expandafter\def\csname#1\endcsname{}% - \expandafter\def\csname end#1\endcsname{}} -\def\excludecomment - #1{\expandafter\def\csname#1\endcsname{\ThrowAwayComment{#1}}% - {\escapechar=-1\relax - \edef\tmp{\string\\end#1}% - \csarg\xdef{PlainEnd#1Test}{\meaning\tmp}% - \edef\tmp{\string\\end\string\{#1\string\}}% - \csarg\xdef{LaLaEnd#1Test}{\meaning\tmp}% - \edef\tmp{\string\\end \string\{#1\string\}}% - \csarg\xdef{LaInnEnd#1Test}{\meaning\tmp}% - }} - -\excludecomment{comment} -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% end Comment.sty -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -% -% Alternative code by Robin Fairbairns, 22 September 1997 -% -\newcommand\@gobbleenv{\let\reserved@a\@currenvir\@gobble@nv} -\long\def\@gobble@nv#1\end#2{\def\reserved@b{#2}% - \ifx\reserved@a\reserved@b - \edef\reserved@a{\noexpand\end{\reserved@a}}% - \expandafter\reserved@a - \else - \expandafter\@gobble@nv - \fi} - -\renewcommand{\excludecomment}[1]{% - \csname newenvironment\endcsname{#1}{\@gobbleenv}{}} - -%%% RAW HTML -% -% Enclose raw HTML between a \begin{rawhtml} and \end{rawhtml}. -% The html environment ignores its body -% -\excludecomment{rawhtml} - - -%%% HTML ONLY -% -% Enclose LaTeX constructs which will only appear in the -% HTML output and will be ignored by LaTeX with -% \begin{htmlonly} and \end{htmlonly} -% -\excludecomment{htmlonly} -% Shorter version -\newcommand{\html}[1]{} - -% for images.tex only -\excludecomment{imagesonly} - -%%% LaTeX ONLY -% Enclose LaTeX constructs which will only appear in the -% DVI output and will be ignored by latex2html with -%\begin{latexonly} and \end{latexonly} -% -\newenvironment{latexonly}{}{} -% Shorter version -\newcommand{\latex}[1]{#1} - - -%%% LaTeX or HTML -% Combination of \latex and \html. -% Say \latexhtml{this should be latex text}{this html text} -% -%\newcommand{\latexhtml}[2]{#1} -\long\def\latexhtml#1#2{#1} - - -%%% tracing the HTML conversions -% This alters the tracing-level within the processing -% performed by latex2html by adjusting $VERBOSITY -% (see latex2html.config for the appropriate values) -% -\newcommand{\htmltracing}[1]{} -\newcommand{\htmltracenv}[1]{} - - -%%% \strikeout for HTML only -% uses <STRIKE>...</STRIKE> tags on the argument -% LaTeX just gobbles it up. -\newcommand{\strikeout}[1]{} - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%% JCL - stop input here if LaTeX2e is not present -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -\ifx\if@compatibility\undefined - %LaTeX209 - \makeatother\relax\expandafter\endinput -\fi -\if@compatibility - %LaTeX2e in LaTeX209 compatibility mode - \makeatother\relax\expandafter\endinput -\fi - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% Start providing LaTeX2e extension: -% This is currently: -% - additional optional argument for \htmladdimg -% - support for segmented documents -% - -\ProvidesPackage{html} - [1996/12/22 v1.1 hypertext commands for latex2html (nd, hws, rrm)] -%%%%MG - -% This command takes as argument a URL pointing to an image. -% The image will be embedded in the HTML document but will -% be ignored in the dvi and ps files. The optional argument -% denotes additional HTML tags. -% -% Example: \htmladdimg[ALT="portrait" ALIGN=CENTER]{portrait.gif} -% -\renewcommand{\htmladdimg}[2][]{} - -%%% HTMLRULE for LaTeX2e -% This command adds a horizontal rule and is valid even within -% a figure caption. -% -% This command is best used with LaTeX2e and HTML 3.2 support. -% It is like \hrule, but allows for options via key--value pairs -% as follows: \htmlrule[key1=value1, key2=value2, ...] . -% Use \htmlrule* to suppress the <BR> tag. -% Eg. \htmlrule[left, 15, 5pt, "none", NOSHADE] produces -% <BR CLEAR="left"><HR NOSHADE SIZE="15">. -% Renew the necessary part. -\renewcommand{\htmlrulestar}[1][all]{} - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% renew some definitions to allow optional arguments -% -% The description of the options is missing, as yet. -% -\renewcommand{\latextohtml}{\textup{\LaTeX2\texttt{HTML}}} -\renewcommand{\htmladdnormallinkfoot}[3][]{#2\footnote{#3}} -\renewcommand{\htmladdnormallink}[3][]{#2} -\renewcommand{\htmlbody}[1][]{} -\renewcommand{\hyperref}[1][ref]{\hyperrefx[#1]} -\renewcommand{\hypercite}[1][int]{\hypercitex[#1]} -\renewcommand{\htmlref}[3][]{#2} -\renewcommand{\htmlcite}[1]{#1\htmlcitex} -\newcommand{\htmlcitex}[2][]{{\def\tmp{#1}\ifx\tmp\@empty\else~[#1]\fi}} -\renewcommand{\htmlimage}[2][]{} -\renewcommand{\htmlborder}[2][]{} - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% HTML HTMLset HTMLsetenv -% -% These commands do nothing in LaTeX, but can be used to place -% HTML tags or set Perl variables during the LaTeX2HTML processing; -% They are intended for expert use only. - -\newcommand{\HTMLcode}[2][]{} -\ifx\undefined\HTML\newcommand{\HTML}[2][]{}\else -\typeout{*** Warning: \string\HTML\space had an incompatible definition ***}% -\typeout{*** instead use \string\HTMLcode\space for raw HTML code ***}% -\fi -\newcommand{\HTMLset}[3][]{} -\newcommand{\HTMLsetenv}[3][]{} - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -% -% The following commands pertain to document segmentation, and -% were added by Herbert Swan <dprhws@xxxxxxxxxxxx> (with help from -% Michel Goossens <goossens@xxxxxxx>): -% -% -% This command inputs internal latex2html tables so that large -% documents can to partitioned into smaller (more manageable) -% segments. -% -\newcommand{\internal}[2][internals]{} - -% -% Define a dummy stub \htmlhead{}. This command causes latex2html -% to define the title of the start of a new segment. It is not -% normally placed in the user's document. Rather, it is passed to -% latex2html via a .ptr file written by \segment. -% -\newcommand{\htmlhead}[3][]{} - -% In the LaTeX2HTML version this will eliminate the title line -% generated by a \segment command, but retains the title string -% for use in other places. -% -\newcommand{\htmlnohead}{} - - -% In the LaTeX2HTML version this put a URL into a <BASE> tag -% within the <HEAD>...</HEAD> portion of a document. -% -\newcommand{\htmlbase}[1]{} -% - -% -% The dummy command \endpreamble is needed by latex2html to -% mark the end of the preamble in document segments that do -% not contain a \begin{document} -% -\newcommand{\startdocument}{} - - -% \tableofchildlinks, \htmlinfo -% by Ross Moore --- extensions dated 27 September 1997 -% -% These do nothing in LaTeX but for LaTeX2HTML they mark -% where the table of child-links and info-page should be placed, -% when the user wants other than the default. -% \tableofchildlinks % put mini-TOC at this location -% \tableofchildlinks[off] % not on current page -% \tableofchildlinks[none] % not on current and subsequent pages -% \tableofchildlinks[on] % selectively on current page -% \tableofchildlinks[all] % on current and all subsequent pages -% \htmlinfo % put info-page at this location -% \htmlinfo[off] % no info-page in current document -% \htmlinfo[none] % no info-page in current document -% *-versions omit the preceding <BR> tag. -% -\newcommand{\tableofchildlinks}{% - \@ifstar\tableofchildlinksstar\tableofchildlinksstar} -\newcommand{\tableofchildlinksstar}[1][]{} - -\newcommand{\htmlinfo}{\@ifstar\htmlinfostar\htmlinfostar} -\newcommand{\htmlinfostar}[1][]{} - - -% This redefines \begin to allow for an optional argument -% which is used by LaTeX2HTML to specify `style-sheet' information - -\let\realLaTeX@begin=\begin -\renewcommand{\begin}[1][]{\realLaTeX@begin} - - -% -% Allocate a new set of section counters, which will get incremented -% for "*" forms of sectioning commands, and for a few miscellaneous -% commands. -% - -\newcounter{lpart} -\newcounter{lchapter}[part] -\@ifundefined{c@chapter}% - {\let\Hchapter\relax \newcounter{lsection}[part]}% - {\let\Hchapter=\chapter \newcounter{lsection}[chapter]} -\newcounter{lsubsection}[section] -\newcounter{lsubsubsection}[subsection] -\newcounter{lparagraph}[subsubsection] -\newcounter{lsubparagraph}[paragraph] -\newcounter{lequation} - -% -% Redefine "*" forms of sectioning commands to increment their -% respective counters. -% -\let\Hpart=\part -%\let\Hchapter=\chapter -\let\Hsection=\section -\let\Hsubsection=\subsection -\let\Hsubsubsection=\subsubsection -\let\Hparagraph=\paragraph -\let\Hsubparagraph=\subparagraph -\let\Hsubsubparagraph=\subsubparagraph - -\ifx\c@subparagraph\undefined - \newcounter{lsubsubparagraph}[lsubparagraph] -\else - \newcounter{lsubsubparagraph}[subparagraph] -\fi - -% -% The following definitions are specific to LaTeX2e: -% (They must be commented out for LaTeX 2.09) -% -\renewcommand{\part}{\@ifstar{\stepcounter{lpart}% - \bgroup\def\tmp{*}\H@part}{\bgroup\def\tmp{}\H@part}} -\newcommand{\H@part}[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hpart\tmp} - -\ifx\Hchapter\relax\else - \def\chapter{\resetsections \@ifstar{\stepcounter{lchapter}% - \bgroup\def\tmp{*}\H@chapter}{\bgroup\def\tmp{}\H@chapter}}\fi -\newcommand{\H@chapter}[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hchapter\tmp} - -\renewcommand{\section}{\resetsubsections - \@ifstar{\stepcounter{lsection}\bgroup\def\tmp{*}% - \H@section}{\bgroup\def\tmp{}\H@section}} -\newcommand{\H@section}[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hsection\tmp} - -\renewcommand{\subsection}{\resetsubsubsections - \@ifstar{\stepcounter{lsubsection}\bgroup\def\tmp{*}% - \H@subsection}{\bgroup\def\tmp{}\H@subsection}} -\newcommand{\H@subsection}[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hsubsection\tmp} - -\renewcommand{\subsubsection}{\resetparagraphs - \@ifstar{\stepcounter{lsubsubsection}\bgroup\def\tmp{*}% - \H@subsubsection}{\bgroup\def\tmp{}\H@subsubsection}} -\newcommand{\H@subsubsection}[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hsubsubsection\tmp} - -\renewcommand{\paragraph}{\resetsubparagraphs - \@ifstar{\stepcounter{lparagraph}\bgroup\def\tmp{*}% - \H@paragraph}{\bgroup\def\tmp{}\H@paragraph}} -\newcommand\H@paragraph[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hparagraph\tmp} - -\renewcommand{\subparagraph}{\resetsubsubparagraphs - \@ifstar{\stepcounter{lsubparagraph}\bgroup\def\tmp{*}% - \H@subparagraph}{\bgroup\def\tmp{}\H@subparagraph}} -\newcommand\H@subparagraph[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hsubparagraph\tmp} - -\ifx\Hsubsubparagraph\relax\else\@ifundefined{subsubparagraph}{}{% -\def\subsubparagraph{% - \@ifstar{\stepcounter{lsubsubparagraph}\bgroup\def\tmp{*}% - \H@subsubparagraph}{\bgroup\def\tmp{}\H@subsubparagraph}}}\fi -\newcommand\H@subsubparagraph[1][]{\def\tmp@a{#1}\check@align - \expandafter\egroup\expandafter\Hsubsubparagraph\tmp} - -\def\check@align{\def\empty{}\ifx\tmp@a\empty - \else\def\tmp@b{center}\ifx\tmp@a\tmp@b\let\tmp@a\empty - \else\def\tmp@b{left}\ifx\tmp@a\tmp@b\let\tmp@a\empty - \else\def\tmp@b{right}\ifx\tmp@a\tmp@b\let\tmp@a\empty - \else\expandafter\def\expandafter\tmp@a\expandafter{\expandafter[\tmp@a]}% - \fi\fi\fi \def\empty{}\ifx\tmp\empty\let\tmp=\tmp@a \else - \expandafter\def\expandafter\tmp\expandafter{\expandafter*\tmp@a}% - \fi\fi} -% -\def\resetsections{\setcounter{section}{0}\setcounter{lsection}{0}% - \reset@dependents{section}\resetsubsections } -\def\resetsubsections{\setcounter{subsection}{0}\setcounter{lsubsection}{0}% - \reset@dependents{subsection}\resetsubsubsections } -\def\resetsubsubsections{\setcounter{subsubsection}{0}\setcounter{lsubsubsection}{0}% - \reset@dependents{subsubsection}\resetparagraphs } -% -\def\resetparagraphs{\setcounter{lparagraph}{0}\setcounter{lparagraph}{0}% - \reset@dependents{paragraph}\resetsubparagraphs } -\def\resetsubparagraphs{\ifx\c@subparagraph\undefined\else - \setcounter{subparagraph}{0}\fi \setcounter{lsubparagraph}{0}% - \reset@dependents{subparagraph}\resetsubsubparagraphs } -\def\resetsubsubparagraphs{\ifx\c@subsubparagraph\undefined\else - \setcounter{subsubparagraph}{0}\fi \setcounter{lsubsubparagraph}{0}} -% -\def\reset@dependents#1{\begingroup\let \@elt \@stpelt - \csname cl@#1\endcsname\endgroup} -% -% -% Define a helper macro to dump a single \secounter command to a file. -% -\newcommand{\DumpPtr}[2]{% -\count255=\arabic{#1}\def\dummy{dummy}\def\tmp{#2}% -\ifx\tmp\dummy\else\advance\count255 by \arabic{#2}\fi -\immediate\write\ptrfile{% -\noexpand\setcounter{#1}{\number\count255}}} - -% -% Define a helper macro to dump all counters to the file. -% The value for each counter will be the sum of the l-counter -% actual LaTeX section counter. -% Also dump an \htmlhead{section-command}{section title} command -% to the file. -% -\newwrite\ptrfile -\def\DumpCounters#1#2#3#4{% -\begingroup\let\protect=\noexpand -\immediate\openout\ptrfile = #1.ptr -\DumpPtr{part}{lpart}% -\ifx\Hchapter\relax\else\DumpPtr{chapter}{lchapter}\fi -\DumpPtr{section}{lsection}% -\DumpPtr{subsection}{lsubsection}% -\DumpPtr{subsubsection}{lsubsubsection}% -\DumpPtr{paragraph}{lparagraph}% -\DumpPtr{subparagraph}{lsubparagraph}% -\DumpPtr{equation}{lequation}% -\DumpPtr{footnote}{dummy}% -\def\tmp{#4}\ifx\tmp\@empty -\immediate\write\ptrfile{\noexpand\htmlhead{#2}{#3}}\else -\immediate\write\ptrfile{\noexpand\htmlhead[#4]{#2}{#3}}\fi -\dumpcitestatus \dumpcurrentcolor -\immediate\closeout\ptrfile -\endgroup } - - -%% interface to natbib.sty - -\def\dumpcitestatus{} -\def\loadcitestatus{\def\dumpcitestatus{% - \ifciteindex\immediate\write\ptrfile{\noexpand\citeindextrue}% - \else\immediate\write\ptrfile{\noexpand\citeindexfalse}\fi }% -} -\@ifpackageloaded{natbib}{\loadcitestatus}{% - \AtBeginDocument{\@ifpackageloaded{natbib}{\loadcitestatus}{}}} - - -%% interface to color.sty - -\def\dumpcurrentcolor{} -\def\loadsegmentcolors{% - \let\real@pagecolor=\pagecolor - \let\pagecolor\segmentpagecolor - \let\segmentcolor\color - \ifx\current@page@color\undefined \def\current@page@color{{}}\fi - \def\dumpcurrentcolor{\bgroup\def\@empty@{{}}% - \expandafter\def\expandafter\tmp\space####1@{\def\thiscol{####1}}% - \ifx\current@color\@empty@\def\thiscol{}\else - \expandafter\tmp\current@color @\fi - \immediate\write\ptrfile{\noexpand\segmentcolor{\thiscol}}% - \ifx\current@page@color\@empty@\def\thiscol{}\else - \expandafter\tmp\current@page@color @\fi - \immediate\write\ptrfile{\noexpand\segmentpagecolor{\thiscol}}% - \egroup}% - \global\let\loadsegmentcolors=\relax -} - -% These macros are needed within images.tex since this inputs -% the <segment>.ptr files for a segment, so that counters are -% colors are synchronised. -% -\newcommand{\segmentpagecolor}[1][]{% - \@ifpackageloaded{color}{\loadsegmentcolors\bgroup - \def\tmp{#1}\ifx\@empty\tmp\def\next{[]}\else\def\next{[#1]}\fi - \expandafter\segmentpagecolor@\next}% - {\@gobble}} -\def\segmentpagecolor@[#1]#2{\def\tmp{#1}\def\tmpB{#2}% - \ifx\tmpB\@empty\let\next=\egroup - \else - \let\realendgroup=\endgroup - \def\endgroup{\edef\next{\noexpand\realendgroup - \def\noexpand\current@page@color{\current@color}}\next}% - \ifx\tmp\@empty\real@pagecolor{#2}\def\model{}% - \else\real@pagecolor[#1]{#2}\def\model{[#1]}% - \fi - \edef\next{\egroup\def\noexpand\current@page@color{\current@page@color}% - \noexpand\real@pagecolor\model{#2}}% - \fi\next} -% -\newcommand{\segmentcolor}[2][named]{\@ifpackageloaded{color}% - {\loadsegmentcolors\segmentcolor[#1]{#2}}{}} - -\@ifpackageloaded{color}{\loadsegmentcolors}{\let\real@pagecolor=\@gobble - \AtBeginDocument{\@ifpackageloaded{color}{\loadsegmentcolors}{}}} - - -% Define the \segment[align]{file}{section-command}{section-title} command, -% and its helper macros. This command does four things: -% 1) Begins a new LaTeX section; -% 2) Writes a list of section counters to file.ptr, each -% of which represents the sum of the LaTeX section -% counters, and the l-counters, defined above; -% 3) Write an \htmlhead{section-title} command to file.ptr; -% 4) Inputs file.tex. - -\def\segment{\@ifstar{\@@htmls}{\@@html}} -\def\endsegment{} -\newcommand{\@@htmls}[1][]{\@@htmlsx{#1}} -\newcommand{\@@html}[1][]{\@@htmlx{#1}} -\def\@@htmlsx#1#2#3#4{\csname #3\endcsname* {#4}% - \DumpCounters{#2}{#3*}{#4}{#1}\input{#2}} -\def\@@htmlx#1#2#3#4{\csname #3\endcsname {#4}% - \DumpCounters{#2}{#3}{#4}{#1}\input{#2}} - -\makeatother -\endinput - - -% Modifications: -% -% (The listing of Initiales see Changes) - -% $Log: html.sty,v $ -% Revision 1.23 1998/02/26 10:32:24 latex2html -% -- use \providecommand for \latextohtml -% -- implemented \HTMLcode to do what \HTML did previously -% \HTML still works, unless already defined by another package -% -- fixed problems remaining with undefined \chapter -% -- defined \endsegment -% -% Revision 1.22 1997/12/05 11:38:18 RRM -% -- implemented an optional argument to \begin for style-sheet info. -% -- modified use of an optional argument with sectioning-commands -% -% Revision 1.21 1997/11/05 10:28:56 RRM -% -- replaced redefinition of \@htmlrule with \htmlrulestar -% -% Revision 1.20 1997/10/28 02:15:58 RRM -% -- altered the way some special html-macros are defined, so that -% star-variants are explicitly defined for LaTeX -% -- it is possible for these to occur within images.tex -% e.g. \htmlinfostar \htmlrulestar \tableofchildlinksstar -% -% Revision 1.19 1997/10/11 05:47:48 RRM -% -- allow the dummy {tex2html_nowrap} environment in LaTeX -% use it to make its contents be evaluated in environment order -% -% Revision 1.18 1997/10/04 06:56:50 RRM -% -- uses Robin Fairbairns' code for ignored environments, -% replacing the previous comment.sty stuff. -% -- extensions to the \tableofchildlinks command -% -- extensions to the \htmlinfo command -% -% Revision 1.17 1997/07/08 11:23:39 RRM -% include value of footnote counter in .ptr files for segments -% -% Revision 1.16 1997/07/03 08:56:34 RRM -% use \textup within the \latextohtml macro -% -% Revision 1.15 1997/06/15 10:24:58 RRM -% new command \htmltracenv as environment-ordered \htmltracing -% -% Revision 1.14 1997/06/06 10:30:37 RRM -% - new command: \htmlborder puts environment into a <TABLE> cell -% with a border of specified width, + other attributes. -% - new commands: \HTML for setting arbitrary HTML tags, with attributes -% \HTMLset for setting Perl variables, while processing -% \HTMLsetenv same as \HTMLset , but it gets processed -% as if it were an environment. -% - new command: \latextohtml --- to set the LaTeX2HTML name/logo -% - fixed some remaining problems with \segmentcolor & \segmentpagecolor -% -% Revision 1.13 1997/05/19 13:55:46 RRM -% alterations and extra options to \hypercite -% -% Revision 1.12 1997/05/09 12:28:39 RRM -% - Added the optional argument to \htmlhead, also in \DumpCounters -% - Implemented \HTMLset as a no-op in LaTeX. -% - Fixed a bug in accessing the page@color settings. -% -% Revision 1.11 1997/03/26 09:32:40 RRM -% - Implements LaTeX versions of \externalcite and \hypercite commands. -% Thanks to Uffe Engberg and Stephen Simpson for the suggestions. -% -% Revision 1.10 1997/03/06 07:37:58 RRM -% Added the \htmltracing command, for altering $VERBOSITY . -% -% Revision 1.9 1997/02/17 02:26:26 RRM -% - changes to counter handling (RRM) -% - shuffled around some definitions -% - changed \htmlrule of 209 mode -% -% Revision 1.8 1997/01/26 09:04:12 RRM -% RRM: added optional argument to sectioning commands -% \htmlbase sets the <BASE HREF=...> tag -% \htmlinfo and \htmlinfo* allow the document info to be positioned -% -% Revision 1.7 1997/01/03 12:15:44 L2HADMIN -% % - fixes to the color and natbib interfaces -% % - extended usage of \hyperref, via an optional argument. -% % - extended use comment environments to allow shifting expansions -% % e.g. within \multicolumn (`bug' reported by Luc De Coninck). -% % - allow optional argument to: \htmlimage, \htmlhead, -% % \htmladdimg, \htmladdnormallink, \htmladdnormallinkfoot -% % - added new commands: \htmlbody, \htmlnohead -% % - added new command: \tableofchildlinks -% -% Revision 1.6 1996/12/25 03:04:54 JCL -% added patches to segment feature from Martin Wilck -% -% Revision 1.5 1996/12/23 01:48:06 JCL -% o introduced the environment makeimage, which may be used to force -% LaTeX2HTML to generate an image from the contents. -% There's no magic, all what we have now is a defined empty environment -% which LaTeX2HTML will not recognize and thus pass it to images.tex. -% o provided \protect to the \htmlrule commands to allow for usage -% within captions. -% -% Revision 1.4 1996/12/21 19:59:22 JCL -% - shuffled some entries -% - added \latexhtml command -% -% Revision 1.3 1996/12/21 12:22:59 JCL -% removed duplicate \htmlrule, changed \htmlrule back not to create a \hrule -% to allow occurrence in caption -% -% Revision 1.2 1996/12/20 04:03:41 JCL -% changed occurrence of \makeatletter, \makeatother -% added new \htmlrule command both for the LaTeX2.09 and LaTeX2e -% sections -% -% -% jcl 30-SEP-96 -% - Stuck the commands commonly used by both LaTeX versions to the top, -% added a check which stops input or reads further if the document -% makes use of LaTeX2e. -% - Introduced rrm's \dumpcurrentcolor and \bodytext -% hws 31-JAN-96 - Added support for document segmentation -% hws 10-OCT-95 - Added \htmlrule command -% jz 22-APR-94 - Added support for htmlref -% nd - Created diff --git a/docs/pythfilter.py b/docs/pythfilter.py deleted file mode 100644 index 3054f7c..0000000 --- a/docs/pythfilter.py +++ /dev/null @@ -1,658 +0,0 @@ -#!/usr/bin/env python - -# pythfilter.py v1.5.5, written by Matthias Baas (baas@xxxxxxxxxx) - -# Doxygen filter which can be used to document Python source code. -# Classes (incl. methods) and functions can be documented. -# Every comment that begins with ## is literally turned into an -# Doxygen comment. Consecutive comment lines are turned into -# comment blocks (-> /** ... */). -# All the stuff is put inside a namespace with the same name as -# the source file. - -# Conversions: -# ============ -# ##-blocks -> /** ... */ -# "class name(base): ..." -> "class name : public base {...}" -# "def name(params): ..." -> "name(params) {...}" - -# Changelog: -# 21.01.2003: Raw (r"") or unicode (u"") doc string will now be properly -# handled. (thanks to Richard Laager for the patch) -# 22.12.2003: Fixed a bug where no function names would be output for "def" -# blocks that were not in a class. -# (thanks to Richard Laager for the patch) -# 12.12.2003: Implemented code to handle static and class methods with -# this logic: Methods with "self" as the first argument are -# non-static. Methods with "cls" are Python class methods, -# which translate into static methods for Doxygen. Other -# methods are assumed to be static methods. As should be -# obvious, this logic doesn't take into account if the method -# is actually setup as a classmethod() or a staticmethod(), -# just if it follows the normal conventions. -# (thanks to Richard Laager for the patch) -# 11.12.2003: Corrected #includes to use os.path.sep instead of ".". Corrected -# namespace code to use "::" instead of ".". -# (thanks to Richard Laager for the patch) -# 11.12.2003: Methods beginning with two underscores that end with -# something other than two underscores are considered private -# and are handled accordingly. -# (thanks to Richard Laager for the patch) -# 03.12.2003: The first parameter of class methods (self) is removed from -# the documentation. -# 03.11.2003: The module docstring will be used as namespace documentation -# (thanks to Joe Bronkema for the patch) -# 08.07.2003: Namespaces get a default documentation so that the namespace -# and its contents will show up in the generated documentation. -# 05.02.2003: Directories will be delted during synchronization. -# 31.01.2003: -f option & filtering entire directory trees. -# 10.08.2002: In base classes the '.' will be replaced by '::' -# 18.07.2002: * and ** will be translated into arguments -# 18.07.2002: Argument lists may contain default values using constructors. -# 18.06.2002: Support for ## public: -# 21.01.2002: from ... import will be translated to "using namespace ...;" -# TODO: "from ... import *" vs "from ... import names" -# TODO: Using normal imports: name.name -> name::name -# 20.01.2002: #includes will be placed in front of the namespace - -###################################################################### - -# The program is written as a state machine with the following states: -# -# - OUTSIDE The current position is outside any comment, -# class definition or function. -# -# - BUILD_COMMENT Begins with first "##". -# Ends with the first token that is no "##" -# at the same column as before. -# -# - BUILD_CLASS_DECL Begins with "class". -# Ends with ":" -# - BUILD_CLASS_BODY Begins just after BUILD_CLASS_DECL. -# The first following token (which is no comment) -# determines indentation depth. -# Ends with a token that has a smaller indendation. -# -# - BUILD_DEF_DECL Begins with "def". -# Ends with ":". -# - BUILD_DEF_BODY Begins just after BUILD_DEF_DECL. -# The first following token (which is no comment) -# determines indentation depth. -# Ends with a token that has a smaller indendation. - -import getopt -import glob -import os.path -import re -import shutil -import string -import sys -import token -import tokenize - -from stat import * - -OUTSIDE = 0 -BUILD_COMMENT = 1 -BUILD_CLASS_DECL = 2 -BUILD_CLASS_BODY = 3 -BUILD_DEF_DECL = 4 -BUILD_DEF_BODY = 5 -IMPORT = 6 -IMPORT_OP = 7 -IMPORT_APPEND = 8 - -# Output file stream -outfile = sys.stdout - -# Output buffer -outbuffer = [] - -out_row = 1 -out_col = 0 - -# Variables used by rec_name_n_param() -name = "" -param = "" -doc_string = "" -record_state = 0 -bracket_counter = 0 - -# Tuple: (row,column) -class_spos = (0,0) -def_spos = (0,0) -import_spos = (0,0) - -# Which import was used? ("import" or "from") -import_token = "" - -# Comment block buffer -comment_block = [] -comment_finished = 0 - -# Imported modules -modules = [] - -# Program state -stateStack = [OUTSIDE] - -# Keep track of whether module has a docstring -module_has_docstring = False - -# Keep track of member protection -protection_level = "public" -private_member = False - -# Keep track of the module namespace -namespace = "" - -###################################################################### -# Output string s. '\n' may only be at the end of the string (not -# somewhere in the middle). -# -# In: s - String -# spos - Startpos -###################################################################### -def output(s,spos, immediate=0): - global outbuffer, out_row, out_col, outfile - - os = string.rjust(s,spos[1]-out_col+len(s)) - - if immediate: - outfile.write(os) - else: - outbuffer.append(os) - - assert -1 == string.find(s[0:-2], "\n"), s - - if (s[-1:]=="\n"): - out_row = out_row+1 - out_col = 0 - else: - out_col = spos[1]+len(s) - - -###################################################################### -# Records a name and parameters. The name is either a class name or -# a function name. Then the parameter is either the base class or -# the function parameters. -# The name is stored in the global variable "name", the parameters -# in "param". -# The variable "record_state" holds the current state of this internal -# state machine. -# The recording is started by calling start_recording(). -# -# In: type, tok -###################################################################### -def rec_name_n_param(type, tok): - global record_state,name,param,doc_string,bracket_counter - s = record_state - # State 0: Do nothing. - if (s==0): - return - # State 1: Remember name. - elif (s==1): - name = tok - record_state = 2 - # State 2: Wait for opening bracket or colon - elif (s==2): - if (tok=='('): - bracket_counter = 1 - record_state=3 - if (tok==':'): record_state=4 - # State 3: Store parameter (or base class) and wait for an ending bracket - elif (s==3): - if (tok=='*' or tok=='**'): - tok='' - if (tok=='('): - bracket_counter = bracket_counter+1 - if (tok==')'): - bracket_counter = bracket_counter-1 - if bracket_counter==0: - record_state=4 - else: - param=param+tok - # State 4: Look for doc string - elif (s==4): - if (type==token.NEWLINE or type==token.INDENT or type==token.SLASHEQUAL): - return - elif (tok==":"): - return - elif (type==token.STRING): - while tok[:1]=='r' or tok[:1]=='u': - tok=tok[1:] - while tok[:1]=='"': - tok=tok[1:] - while tok[-1:]=='"': - tok=tok[:-1] - doc_string=tok - record_state=0 - -###################################################################### -# Starts the recording of a name & param part. -# The function rec_name_n_param() has to be fed with tokens. After -# the necessary tokens are fed the name and parameters can be found -# in the global variables "name" und "param". -###################################################################### -def start_recording(): - global record_state,param,name, doc_string - record_state=1 - name="" - param="" - doc_string="" - -###################################################################### -# Test if recording is finished -###################################################################### -def is_recording_finished(): - global record_state - return record_state==0 - -###################################################################### -## Gather comment block -###################################################################### -def gather_comment(type,tok,spos): - global comment_block,comment_finished - if (type!=tokenize.COMMENT): - comment_finished = 1 - else: - # Output old comment block if a new one is started. - if (comment_finished): - print_comment(spos) - comment_finished=0 - if (tok[0:2]=="##" and tok[0:3]!="###"): - append_comment_lines(tok[2:]) - -###################################################################### -## Output comment block and empty buffer. -###################################################################### -def print_comment(spos): - global comment_block,comment_finished - if (comment_block!=[]): - output("/** ",spos) - for c in comment_block: - output(c,spos) - output("*/\n",spos) - comment_block = [] - comment_finished = 0 - -###################################################################### -def set_state(s): - global stateStack - stateStack[len(stateStack)-1]=s - -###################################################################### -def get_state(): - global stateStack - return stateStack[len(stateStack)-1] - -###################################################################### -def push_state(s): - global stateStack - stateStack.append(s) - -###################################################################### -def pop_state(): - global stateStack - stateStack.pop() - - -###################################################################### -def tok_eater(type, tok, spos, epos, line): - global stateStack,name,param,class_spos,def_spos,import_spos - global doc_string, modules, import_token, module_has_docstring - global protection_level, private_member - global out_row - - while out_row + 1 < spos[0]: - output("\n", (0, 0)) - - rec_name_n_param(type,tok) - if (string.replace(string.strip(tok)," ","")=="##private:"): - protection_level = "private" - output("private:\n",spos) - elif (string.replace(string.strip(tok)," ","")=="##protected:"): - protection_level = "protected" - output("protected:\n",spos) - elif (string.replace(string.strip(tok)," ","")=="##public:"): - protection_level = "public" - output("public:\n",spos) - else: - gather_comment(type,tok,spos) - - state = get_state() - -# sys.stderr.write("%d: %s\n"%(state, tok)) - - # OUTSIDE - if (state==OUTSIDE): - if (tok=="class"): - start_recording() - class_spos = spos - push_state(BUILD_CLASS_DECL) - elif (tok=="def"): - start_recording() - def_spos = spos - push_state(BUILD_DEF_DECL) - elif (tok=="import") or (tok=="from"): - import_token = tok - import_spos = spos - modules = [] - push_state(IMPORT) - elif (spos[1] == 0 and tok[:3] == '"""'): - # Capture module docstring as namespace documentation - module_has_docstring = True - append_comment_lines("\\namespace %s\n" % namespace) - append_comment_lines(tok[3:-3]) - print_comment(spos) - - # IMPORT - elif (state==IMPORT): - if (type==token.NAME): - modules.append(tok) - set_state(IMPORT_OP) - # IMPORT_OP - elif (state==IMPORT_OP): - if (tok=="."): - set_state(IMPORT_APPEND) - elif (tok==","): - set_state(IMPORT) - else: - for m in modules: - output('#include "'+m.replace('.',os.path.sep)+'.py"\n', import_spos, immediate=1) - if import_token=="from": - output('using namespace '+m.replace('.', '::')+';\n', import_spos) - pop_state() - # IMPORT_APPEND - elif (state==IMPORT_APPEND): - if (type==token.NAME): - modules[len(modules)-1]+="."+tok - set_state(IMPORT_OP) - # BUILD_CLASS_DECL - elif (state==BUILD_CLASS_DECL): - if (is_recording_finished()): - s = "class "+name - if (param!=""): s = s+" : public "+param.replace('.','::') - if (doc_string!=""): - append_comment_lines(doc_string) - print_comment(class_spos) - output(s+"\n",class_spos) - output("{\n",(class_spos[0]+1,class_spos[1])) - protection_level = "public" - output(" public:\n",(class_spos[0]+2,class_spos[1])) - set_state(BUILD_CLASS_BODY) - # BUILD_CLASS_BODY - elif (state==BUILD_CLASS_BODY): - if (type!=token.INDENT and type!=token.NEWLINE and type!=40 and - type!=tokenize.NL and type!=tokenize.COMMENT and - (spos[1]<=class_spos[1])): - output("}; // end of class\n",(out_row+1,class_spos[1])) - pop_state() - elif (tok=="def"): - start_recording() - def_spos = spos - push_state(BUILD_DEF_DECL) - # BUILD_DEF_DECL - elif (state==BUILD_DEF_DECL): - if (is_recording_finished()): - param = param.replace("\n", " ") - param = param.replace("=", " = ") - params = param.split(",") - if BUILD_CLASS_BODY in stateStack: - if len(name) > 1 \ - and name[0:2] == '__' \ - and name[len(name)-2:len(name)] != '__' \ - and protection_level != 'private': - private_member = True - output(" private:\n",(def_spos[0]+2,def_spos[1])) - - if (doc_string != ""): - append_comment_lines(doc_string) - - print_comment(def_spos) - - output_function_decl(name, params) -# output("{\n",(def_spos[0]+1,def_spos[1])) - set_state(BUILD_DEF_BODY) - # BUILD_DEF_BODY - elif (state==BUILD_DEF_BODY): - if (type!=token.INDENT and type!=token.NEWLINE \ - and type!=40 and type!=tokenize.NL \ - and (spos[1]<=def_spos[1])): -# output("} // end of method/function\n",(out_row+1,def_spos[1])) - if private_member and protection_level != 'private': - private_member = False - output(" " + protection_level + ":\n",(def_spos[0]+2,def_spos[1])) - pop_state() -# else: -# output(tok,spos) - - -def output_function_decl(name, params): - global def_spos - - # Do we document a class method? then remove the 'self' parameter - if params[0] == 'self': - preamble = '' - params = params[1:] - else: - preamble = 'static ' - if params[0] == 'cls': - params = params[1:] - - param_string = string.join(params, ", Type ") - - if param_string == '': - param_string = '(' + param_string + ');\n' - else: - param_string = '(Type ' + param_string + ');\n' - - output(preamble, def_spos) - output(name, def_spos) - output(param_string, def_spos) - - -def append_comment_lines(lines): - map(append_comment_line, doc_string.split('\n')) - -paramRE = re.compile(r'(@param \w+):') - -def append_comment_line(line): - global paramRE - - comment_block.append(paramRE.sub(r'\1', line) + '\n') - -def dump(filename): - f = open(filename) - r = f.readlines() - for s in r: - sys.stdout.write(s) - -def filter(filename): - global name, module_has_docstring, source_root - - path,name = os.path.split(filename) - root,ext = os.path.splitext(name) - - if source_root and path.find(source_root) == 0: - path = path[len(source_root):] - - if path[0] == os.sep: - path = path[1:] - - ns = path.split(os.sep) - else: - ns = [] - - ns.append(root) - - for n in ns: - output("namespace " + n + " {\n",(0,0)) - - # set module name for tok_eater to use if there's a module doc string - name = root - -# sys.stderr.write('Filtering "'+filename+'"...') - f = open(filename) - tokenize.tokenize(f.readline, tok_eater) - f.close() - print_comment((0,0)) - - output("\n",(0,0)) - - for n in ns: - output("} // end of namespace\n",(0,0)) - - if not module_has_docstring: - # Put in default namespace documentation - output('/** \\namespace '+root+' \n',(0,0)) - output(' \\brief Module "%s" */\n'%(root),(0,0)) - - for s in outbuffer: - outfile.write(s) - - -def filterFile(filename, out=sys.stdout): - global outfile - - outfile = out - - try: - root,ext = os.path.splitext(filename) - - if ext==".py": - filter(filename) - else: - dump(filename) - -# sys.stderr.write("OK\n") - except IOError,e: - sys.stderr.write(e[1]+"\n") - - -###################################################################### - -# preparePath -def preparePath(path): - """Prepare a path. - - Checks if the path exists and creates it if it does not exist. - """ - if not os.path.exists(path): - parent = os.path.dirname(path) - if parent!="": - preparePath(parent) - os.mkdir(path) - -# isNewer -def isNewer(file1,file2): - """Check if file1 is newer than file2. - - file1 must be an existing file. - """ - if not os.path.exists(file2): - return True - return os.stat(file1)[ST_MTIME]>os.stat(file2)[ST_MTIME] - -# convert -def convert(srcpath, destpath): - """Convert a Python source tree into a C+ stub tree. - - All *.py files in srcpath (including sub-directories) are filtered - and written to destpath. If destpath exists, only the files - that have been modified are filtered again. Files that were deleted - from srcpath are also deleted in destpath if they are still present. - The function returns the number of processed *.py files. - """ - count=0 - sp = os.path.join(srcpath,"*") - sfiles = glob.glob(sp) - dp = os.path.join(destpath,"*") - dfiles = glob.glob(dp) - leftovers={} - for df in dfiles: - leftovers[os.path.basename(df)]=1 - - for srcfile in sfiles: - basename = os.path.basename(srcfile) - if basename in leftovers: - del leftovers[basename] - - # Is it a subdirectory? - if os.path.isdir(srcfile): - sdir = os.path.join(srcpath,basename) - ddir = os.path.join(destpath,basename) - count+=convert(sdir, ddir) - continue - # Check the extension (only *.py will be converted) - root, ext = os.path.splitext(srcfile) - if ext.lower()!=".py": - continue - - destfile = os.path.join(destpath,basename) - if destfile==srcfile: - print "WARNING: Input and output names are identical!" - sys.exit(1) - - count+=1 -# sys.stdout.write("%s\015"%(srcfile)) - - if isNewer(srcfile, destfile): - preparePath(os.path.dirname(destfile)) -# out=open(destfile,"w") -# filterFile(srcfile, out) -# out.close() - os.system("python %s -f %s>%s"%(sys.argv[0],srcfile,destfile)) - - # Delete obsolete files in destpath - for df in leftovers: - dname=os.path.join(destpath,df) - if os.path.isdir(dname): - try: - shutil.rmtree(dname) - except: - print "Can't remove obsolete directory '%s'"%dname - else: - try: - os.remove(dname) - except: - print "Can't remove obsolete file '%s'"%dname - - return count - - -###################################################################### -###################################################################### -###################################################################### - -filter_file = False -source_root = None - -try: - opts, args = getopt.getopt(sys.argv[1:], "hfr:", ["help"]) -except getopt.GetoptError,e: - print e - sys.exit(1) - -for o,a in opts: - if o=="-f": - filter_file = True - - if o=="-r": - source_root = os.path.abspath(a) - -if filter_file: - # Filter the specified file and print the result to stdout - filename = string.join(args) - filterFile(os.path.abspath(filename)) -else: - - if len(args)!=2: - sys.stderr.write("%s options input output\n"%(os.path.basename(sys.argv[0]))) - sys.exit(1) - - # Filter an entire Python source tree - print '"%s" -> "%s"\n'%(args[0],args[1]) - c=convert(args[0],args[1]) - print "%d files"%(c) - -- 1.7.2.5 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel

©2013 Xen Project, A Linux Foundation Collaborative Project. All Rights Reserved.
Linux Foundation is a registered trademark of The Linux Foundation.
Xen Project is a trademark of The Linux Foundation.