|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v2] x86/ucode: Improve error handling and container file processing on AMD
Do not report error when a patch is not appplicable to current processor,
simply skip it and move on to next patch in container file.
Process container file to the end instead of stopping at the first
applicable patch.
Log the fact that a patch has been applied at KERN_WARNING level, modify
debug messages.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxx>
---
xen/arch/x86/microcode_amd.c | 102 +++++++++++++++++++++++-------------------
1 file changed, 56 insertions(+), 46 deletions(-)
diff --git a/xen/arch/x86/microcode_amd.c b/xen/arch/x86/microcode_amd.c
index 7a54001..5073a3c 100644
--- a/xen/arch/x86/microcode_amd.c
+++ b/xen/arch/x86/microcode_amd.c
@@ -88,13 +88,13 @@ static int collect_cpu_info(int cpu, struct cpu_signature
*csig)
rdmsrl(MSR_AMD_PATCHLEVEL, csig->rev);
- printk(KERN_DEBUG "microcode: collect_cpu_info: patch_id=%#x\n",
- csig->rev);
+ printk(KERN_DEBUG "microcode: CPU%d collect_cpu_info: patch_id=%#x\n",
+ cpu, csig->rev);
return 0;
}
-static int microcode_fits(const struct microcode_amd *mc_amd, int cpu)
+static bool_t microcode_fits(const struct microcode_amd *mc_amd, int cpu)
{
struct ucode_cpu_info *uci = &per_cpu(ucode_cpu_info, cpu);
const struct microcode_header_amd *mc_header = mc_amd->mpb;
@@ -121,12 +121,7 @@ static int microcode_fits(const struct microcode_amd
*mc_amd, int cpu)
return 0;
if ( (mc_header->processor_rev_id) != equiv_cpu_id )
- {
- printk(KERN_DEBUG "microcode: CPU%d patch does not match "
- "(patch is %x, cpu base id is %x) \n",
- cpu, mc_header->processor_rev_id, equiv_cpu_id);
- return -EINVAL;
- }
+ return 0;
if ( mc_header->patch_id <= uci->cpu_sig.rev )
return 0;
@@ -173,7 +168,7 @@ static int apply_microcode(int cpu)
return -EIO;
}
- printk(KERN_INFO "microcode: CPU%d updated from revision %#x to %#x\n",
+ printk(KERN_WARNING "microcode: CPU%d updated from revision %#x to %#x\n",
cpu, uci->cpu_sig.rev, hdr->patch_id);
uci->cpu_sig.rev = rev;
@@ -181,7 +176,7 @@ static int apply_microcode(int cpu)
return 0;
}
-static int get_next_ucode_from_buffer_amd(
+static int get_ucode_from_buffer_amd(
struct microcode_amd *mc_amd,
const void *buf,
size_t bufsize,
@@ -194,23 +189,22 @@ static int get_next_ucode_from_buffer_amd(
off = *offset;
/* No more data */
- if ( off >= bufsize )
- return 1;
+ if ( off >= bufsize )
+ {
+ printk(KERN_ERR "microcode: Microcode buffer overrun\n");
+ return -EINVAL;
+ }
mpbuf = (const struct mpbhdr *)&bufp[off];
if ( mpbuf->type != UCODE_UCODE_TYPE )
{
- printk(KERN_ERR "microcode: error! "
- "Wrong microcode payload type field\n");
+ printk(KERN_ERR "microcode: Wrong microcode payload type field\n");
return -EINVAL;
}
- printk(KERN_DEBUG "microcode: size %zu, block size %u, offset %zu\n",
- bufsize, mpbuf->len, off);
-
if ( (off + mpbuf->len) > bufsize )
{
- printk(KERN_ERR "microcode: error! Bad data in microcode data file\n");
+ printk(KERN_ERR "microcode: Bad data in microcode data file\n");
return -EINVAL;
}
@@ -230,6 +224,12 @@ static int get_next_ucode_from_buffer_amd(
*offset = off + mpbuf->len + 8;
+ printk(KERN_DEBUG "microcode: CPU%d size %zu, block size %u, offset %zu, "
+ "equivID %#x rev %#x\n",
+ raw_smp_processor_id(), bufsize, mpbuf->len, off,
+ ((struct microcode_header_amd *)mc_amd->mpb)->processor_rev_id,
+ ((struct microcode_header_amd *)mc_amd->mpb)->patch_id);
+
return 0;
}
@@ -246,14 +246,14 @@ static int install_equiv_cpu_table(
if ( mpbuf->type != UCODE_EQUIV_CPU_TABLE_TYPE )
{
- printk(KERN_ERR "microcode: error! "
+ printk(KERN_ERR "microcode: "
"Wrong microcode equivalent cpu table type field\n");
return -EINVAL;
}
if ( mpbuf->len == 0 )
{
- printk(KERN_ERR "microcode: error! "
+ printk(KERN_ERR "microcode: "
"Wrong microcode equivalent cpu table length\n");
return -EINVAL;
}
@@ -261,7 +261,7 @@ static int install_equiv_cpu_table(
mc_amd->equiv_cpu_table = xmalloc_bytes(mpbuf->len);
if ( !mc_amd->equiv_cpu_table )
{
- printk(KERN_ERR "microcode: error! "
+ printk(KERN_ERR "microcode: "
"Can not allocate memory for equivalent cpu table\n");
return -ENOMEM;
}
@@ -278,8 +278,8 @@ static int cpu_request_microcode(int cpu, const void *buf,
size_t bufsize)
{
struct microcode_amd *mc_amd, *mc_old;
size_t offset = bufsize;
+ size_t last_offset, applied_offset = 0;
int error = 0;
- int ret;
struct ucode_cpu_info *uci = &per_cpu(ucode_cpu_info, cpu);
/* We should bind the task to the CPU */
@@ -287,8 +287,7 @@ static int cpu_request_microcode(int cpu, const void *buf,
size_t bufsize)
if ( *(const uint32_t *)buf != UCODE_MAGIC )
{
- printk(KERN_ERR "microcode: error! Wrong "
- "microcode patch file magic\n");
+ printk(KERN_ERR "microcode: Wrong microcode patch file magic\n");
error = -EINVAL;
goto out;
}
@@ -296,7 +295,7 @@ static int cpu_request_microcode(int cpu, const void *buf,
size_t bufsize)
mc_amd = xmalloc(struct microcode_amd);
if ( !mc_amd )
{
- printk(KERN_ERR "microcode: error! "
+ printk(KERN_ERR "microcode: "
"Can not allocate memory for microcode patch\n");
error = -ENOMEM;
goto out;
@@ -321,33 +320,39 @@ static int cpu_request_microcode(int cpu, const void
*buf, size_t bufsize)
*/
mc_amd->mpb = NULL;
mc_amd->mpb_size = 0;
- while ( (ret = get_next_ucode_from_buffer_amd(mc_amd, buf, bufsize,
- &offset)) == 0 )
+ last_offset = offset;
+ while ( (error = get_ucode_from_buffer_amd(mc_amd, buf, bufsize,
+ &offset)) == 0 )
{
- error = microcode_fits(mc_amd, cpu);
- if (error <= 0)
- continue;
-
- error = apply_microcode(cpu);
- if (error == 0)
+ if ( microcode_fits(mc_amd, cpu) )
{
- error = 1;
- break;
+ error = apply_microcode(cpu);
+ if (error == 0)
+ applied_offset = last_offset;
+ else
+ break;
}
- }
- if ( ret < 0 )
- error = ret;
+ last_offset = offset;
+
+ if ( offset >= bufsize )
+ break;
+ }
/* On success keep the microcode patch for
* re-apply on resume.
*/
- if ( error == 1 )
+ if ( applied_offset != 0 )
{
- xfree(mc_old);
- error = 0;
+ int ret = get_ucode_from_buffer_amd(mc_amd, buf, bufsize,
+ &applied_offset);
+ if (ret == 0)
+ xfree(mc_old);
+ else
+ error = ret;
}
- else
+
+ if ( applied_offset == 0 || error != 0 )
{
xfree(mc_amd);
uci->mc.mc_amd = mc_old;
@@ -356,6 +361,12 @@ static int cpu_request_microcode(int cpu, const void *buf,
size_t bufsize)
out:
svm_host_osvw_init();
+ /*
+ * In some cases we may return an error even if processor's microcode has
+ * been updated. For example, the first patch in a container file is loaded
+ * successfully but subsequent container file processing encounters a
+ * failure.
+ */
return error;
}
@@ -364,10 +375,9 @@ static int microcode_resume_match(int cpu, const void *mc)
struct ucode_cpu_info *uci = &per_cpu(ucode_cpu_info, cpu);
struct microcode_amd *mc_amd = uci->mc.mc_amd;
const struct microcode_amd *src = mc;
- int res = microcode_fits(src, cpu);
- if ( res <= 0 )
- return res;
+ if ( !microcode_fits(src, cpu) )
+ return 0;
if ( src != mc_amd )
{
--
1.7.10.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |