[Xen-devel] 3.8.0-rc0 on xen-unstable: RCU Stall during boot as dom0 kernel after IOAPIC

[Sander Eikelenboom <linux@xxxxxxxxxxxxxx>]

Hi Konrad,

I just tried to boot a 3.8.0-rc0 kernel (last commit: 
7313264b899bbf3988841296265a6e0e8a7b6521) as dom0 on my machine with current 
xen-unstable.
The boot stalls:

[    0.000000] ACPI: PM-Timer IO Port: 0x808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] enabled)
[    0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 6, version 33, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: IOAPIC (id[0x07] address[0xfec20000] gsi_base[24])
[    0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-
[   64.598628] INFO: rcu_preempt detected stalls on CPUs/tasks:
[   64.598676]  0: (1 GPs behind) idle=aed/140000000000000/0 drain=5 . timer 
not pending
[   64.598683]  (detected by 1, t=18004 jiffies, g=18446744073709551414, 
c=18446744073709551413, q=162)
[   64.598692] sending NMI to all CPUs:
[   64.598716] xen: vector 0x2 is not implemented


Perhaps an interesting line is the incomplete (no end of range, and it stalls 
there some time before the kernel reports the stall itself:
[    0.000000] IOAPIC[1]: apic_id 7, version 33, address 0xfec20000, GSI 24-


The exact seem config with 3.7.0 as kernel works fine.
Complete serial log is attached.

--

Sander

Attachment: serial.log
Description: Binary data

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel