[Xen-devel] [PATCH] Correctly expose PCH ISA bridge for IGD passthrough (was PCI-PCI bridge)

["G.R." <firemeteor@xxxxxxxxxxxxxxxxxxxxx>]

Hi Stefano,

Per your request, I resend your patch with my local modification to
fix the PCH ISA bridge to be exposed correctly to domU. This is XEN
part of the fix to make i915 driver properly detect the PCH version.
Another patch for i915 driver side is required too. I'll send that to
intel-gfx list separately. The combined patch set do fix the PCH
detection issue for me.

Thanks,
Timothy

diff --git a/hw/pci.c b/hw/pci.c
index f051de1..d371bd7 100644
--- a/hw/pci.c
+++ b/hw/pci.c
@@ -871,11 +871,6 @@ void pci_unplug_netifs(void)
     }
 }

-typedef struct {
-    PCIDevice dev;
-    PCIBus *bus;
-} PCIBridge;
-
 void pci_bridge_write_config(
PCIDevice *d,
                              uint32_t address, uint32_t val, int len)
 {
diff --git a/hw/pci.h b/hw/pci.h
index edc58b6..c2acab9 100644
--- a/hw/pci.h
+++ b/hw/pci.h
@@ -222,6 +222,11 @@ struct PCIDevice {
     int irq_state[4];
 };

+typedef struct {
+    PCIDevice dev;
+    PCIBus *bus;
+} PCIBridge;
+
 extern char direct_pci_str[];
 extern int direct_pci_msitranslate;
 extern int direct_pci_power_mgmt;
diff --git a/hw/pt-graphics.c b/hw/pt-graphics.c
index c6f8869..de21f90 100644
--- a/hw/pt-graphics.c
+++ b/hw/pt-graphics.c
@@ -3,6 +3,7 @@
  */

 #include "pass-through.h"
+#include "pci.h"
 #include "pci/header.h"
 #include "pci/pci.h"

@@ -40,9 +41,26 @@ void intel_pch_init(PCIBus *bus)
     did = pt_pci_host_read(pci_dev_1f, PCI_DEVICE_ID, 2);
     rid = pt_pci_host_read(pci_dev_1f, PCI_REVISION, 1);

-    if ( vid == PCI_VENDOR_ID_INTEL )
-        pci_bridge_init(bus, PCI_DEVFN(0x1f, 0), vid, did, rid,
-                        pch_map_irq, "intel_bridge_1f");
+    if (vid == PCI_VENDOR_ID_INTEL) {
+        PCIBridge *s = (PCIBridge *)pci_register_device(bus, "intel_bridge_1f",
+                sizeof(PCIBridge), PCI_DEVFN(0x1f, 0), NULL,
pci_bridge_write_config);
+
+        pci_config_set_vendor_id(s->dev.config, vid);
+        pci_config_set_device_id(s->dev.config, did);
+
+        s->dev.config[PCI_COMMAND] = 0x06; // command = bus master, pci mem
+        s->dev.config[PCI_COMMAND + 1] = 0x00;
+        s->dev.config[PCI_STATUS] = 0xa0; // status = fast
back-to-back, 66MHz, no error
+        s->dev.config[PCI_STATUS + 1] = 0x00; // status = fast devsel
+        s->dev.config[PCI_REVISION] = rid;
+        s->dev.config[PCI_CLASS_PROG] = 0x00; // programming i/f
+        pci_config_set_class(s->dev.config, PCI_CLASS_BRIDGE_ISA);
+        s->dev.config[PCI_LATENCY_TIMER] = 0x10;
+        s->dev.config[PCI_HEADER_TYPE] = 0x80;
+        s->dev.config[PCI_SEC_STATUS] = 0xa0;
+
+        s->bus = pci_register_secondary_bus(&s->dev, pch_map_irq);
+    }
 }

 uint32_t igd_read_opregion(struct pt_dev *pci_dev)

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel