[Xen-devel] !!!!help!Problem with qcow2 image during a PVM's setting up

[hxkhust <hxkhust@xxxxxxx>]

The following was what  I did.

1) dd if=/dev/zero of =centos_raw.img bs=1024 count=8000000

2) install the os centos 5.5 x64 in the image file centos_raw.img and the correspongding config file is :

kernel = "/home/pvm/vmlinuz-2.6.18-194.el5xen"
ramdisk = "/home/pvm/initrd-2.6.18-194.el5xen.img"
memory = 768
#maxmem = 768
name = "centos_raw_pv"
vcpus = 1
vif = ['mac=00:24:7C:3C:CE:EF,bridge=eth0']
disk = ['tap:aio:/home/pvm/centos_raw.img,xvda,w']

root = "/dev/xvda1 ro"

3) qemu-img-xen create -b centos_raw.img -f qcow2 centos_raw_qcow2_1.img 5G

4) xm create centos_raw_qcow2_1.cfg and the centos_raw_qcow2_1.cfg is just like this:

kernel = "/home/pvm/vmlinuz-2.6.18-194.el5xen"
ramdisk = "/home/pvm/initrd-2.6.18-194.el5xen.img"
memory = 768
name = "centos_raw_qcow2_1_pv"
vcpus = 1
vif = ['mac=00:24:7C:3C:C1:EF,bridge=eth0']
disk = ['tap:qcow2:/home/pvm/centos_raw_qcow2_1.img,xvda,w']

root = "/dev/xvda1 ro"

 

however I'm failed.the error message after the above command is entered is :

Using config file "./centos_raw_qcow2_1.cfg".

Error: Device 51712 (tap) could not be connected.Setting up the backend failed. See the log files in /var/log/xen/ for details.

 

So I have tried another way.

after I install centos in centos_raw.img, I did the following:

qemu-img-xen convert -O qcow2 centos_raw.img centos_qcow2.img

here this image file centos_qcow2.img can be running normally with the config file :

kernel = "/home/pvm/vmlinuz-2.6.18-194.el5xen"
ramdisk = "/home/pvm/initrd-2.6.18-194.el5xen.img"
memory = 768
name = "centos_raw_pv"
vcpus = 1
vif = ['mac=00:24:7C:3C:CE:EF,bridge=eth0']
disk = ['tap:qcow2:/home/pvm/centos_qcow2.img,xvda,w']

root = "/dev/xvda1 ro"

 

Then I input the command below:

qemu-img-xen create -b centos_qcow2.img -f qcow2 centos_qcow2_qcow2.img 5G

and I edit  the config file centos_qcow2_qcow2.cfg:

kernel = "/home/pvm/vmlinuz-2.6.18-194.el5xen"
ramdisk = "/home/pvm/initrd-2.6.18-194.el5xen.img"
memory = 768
name = "centos_qcow2_qcow2_pv"
vcpus = 1
vif = ['mac=00:24:7C:3C:CE:1F,bridge=eth0']
boot="c"
disk = ['tap:qcow2:/home/pvm/centos_qcow2_qcow2.img,sda,w']

root = "/dev/sda1 ro"

 

and implement the command:

xm create centos_qcow2_qcow2.cfg

 

but what was posted were:

Using config file "./centos_qcow2_qcow2.cfg".

Error: Device 2048 (tap) could not be connected.Setting up the backend failed. See the log files in /var/log/xen/ for details.

 

I need to run a para-virtualized machine whose image file is qcow2 format and is based on another  image file.What can i do with this?I need your help.

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel