|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v3 05/46] xen: arm64: initial build + config changes, start of day code
Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Acked-by: Tim Deegan <tim@xxxxxxx>
---
v3: - s/hyp/el2/
- remove dead code
- fix comment formatting
- Fix xen.lds.S constructor definitions, s/4/BYTES_PER_LONG/g
v2: - Add PSR_MODE definitions for 64-bit to arch-arm.h and use instead of
defining in head.S
- Nuke hard tabs in head.S and mode_switch.S with expand(1)
fixup
---
Config.mk | 2 +-
config/arm64.mk | 12 ++
xen/arch/arm/Makefile | 1 +
xen/arch/arm/Rules.mk | 6 +
xen/arch/arm/arm64/Makefile | 1 +
xen/arch/arm/arm64/head.S | 393 ++++++++++++++++++++++++++++++++++++++
xen/arch/arm/arm64/mode_switch.S | 83 ++++++++
xen/arch/arm/xen.lds.S | 12 +-
xen/include/asm-arm/page.h | 1 +
xen/include/public/arch-arm.h | 14 ++
xen/include/public/hvm/save.h | 2 +-
xen/include/public/xen.h | 2 +-
xen/include/xen/libelf.h | 2 +-
13 files changed, 524 insertions(+), 7 deletions(-)
create mode 100644 config/arm64.mk
create mode 100644 xen/arch/arm/arm64/Makefile
create mode 100644 xen/arch/arm/arm64/head.S
create mode 100644 xen/arch/arm/arm64/mode_switch.S
diff --git a/Config.mk b/Config.mk
index 07b30ba..a61d7e1 100644
--- a/Config.mk
+++ b/Config.mk
@@ -18,7 +18,7 @@ coverage ?= n
XEN_COMPILE_ARCH ?= $(shell uname -m | sed -e s/i.86/x86_32/ \
-e s/i86pc/x86_32/ -e s/amd64/x86_64/ \
- -e s/armv7.*/arm32/)
+ -e s/armv7.*/arm32/ -e s/armv8.*/arm64/)
XEN_TARGET_ARCH ?= $(XEN_COMPILE_ARCH)
XEN_OS ?= $(shell uname -s)
diff --git a/config/arm64.mk b/config/arm64.mk
new file mode 100644
index 0000000..b2457eb
--- /dev/null
+++ b/config/arm64.mk
@@ -0,0 +1,12 @@
+CONFIG_ARM := y
+CONFIG_ARM_64 := y
+CONFIG_ARM_$(XEN_OS) := y
+
+CFLAGS += #-marm -march= -mcpu= etc
+
+HAS_PL011 := y
+
+# Use only if calling $(LD) directly.
+LDFLAGS_DIRECT += -maarch64elf
+
+CONFIG_LOAD_ADDRESS ?= 0x80000000
diff --git a/xen/arch/arm/Makefile b/xen/arch/arm/Makefile
index 3954dbb..677e232 100644
--- a/xen/arch/arm/Makefile
+++ b/xen/arch/arm/Makefile
@@ -1,4 +1,5 @@
subdir-$(arm32) += arm32
+subdir-$(arm64) += arm64
subdir-y += platforms
obj-y += early_printk.o
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index 0843e50..a0a14e0 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -27,6 +27,12 @@ arm32 := y
arm64 := n
endif
+ifeq ($(TARGET_SUBARCH),arm64)
+CFLAGS += -mcpu=generic
+arm32 := n
+arm64 := y
+endif
+
ifneq ($(call cc-option,$(CC),-fvisibility=hidden,n),n)
CFLAGS += -DGCC_HAS_VISIBILITY_ATTRIBUTE
endif
diff --git a/xen/arch/arm/arm64/Makefile b/xen/arch/arm/arm64/Makefile
new file mode 100644
index 0000000..dffbeb1
--- /dev/null
+++ b/xen/arch/arm/arm64/Makefile
@@ -0,0 +1 @@
+obj-y += mode_switch.o
diff --git a/xen/arch/arm/arm64/head.S b/xen/arch/arm/arm64/head.S
new file mode 100644
index 0000000..b7ab251
--- /dev/null
+++ b/xen/arch/arm/arm64/head.S
@@ -0,0 +1,393 @@
+/*
+ * xen/arch/arm/head.S
+ *
+ * Start-of-day code for an ARMv8.
+ *
+ * Ian Campbell <ian.campbell@xxxxxxxxxx>
+ * Copyright (c) 2012 Citrix Systems.
+ *
+ * Based on ARMv7-A head.S by
+ * Tim Deegan <tim@xxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/config.h>
+#include <asm/page.h>
+#include <asm/asm_defns.h>
+
+#define PT_PT 0xe7f /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=111 T=1 P=1 */
+#define PT_MEM 0xe7d /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=111 T=0 P=1 */
+#define PT_DEV 0xe71 /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=100 T=0 P=1 */
+#define PT_DEV_L3 0xe73 /* nG=1 AF=1 SH=10 AP=01 NS=1 ATTR=100 T=1 P=1 */
+
+/* Macro to print a string to the UART, if there is one.
+ * Clobbers r0-r3. */
+#ifdef EARLY_UART_ADDRESS
+#define PRINT(_s) \
+ adr x0, 98f ; \
+ bl puts ; \
+ b 99f ; \
+98: .asciz _s ; \
+ .align 2 ; \
+99:
+#else
+#define PRINT(s)
+#endif
+
+ /*.aarch64*/
+
+ /*
+ * Kernel startup entry point.
+ * ---------------------------
+ *
+ * The requirements are:
+ * MMU = off, D-cache = off, I-cache = on or off,
+ * x0 = physical address to the FDT blob.
+ *
+ * This must be the very first address in the loaded image.
+ * It should be linked at XEN_VIRT_START, and loaded at any
+ * 2MB-aligned address. All of text+data+bss must fit in 2MB,
+ * or the initial pagetable code below will need adjustment.
+ */
+
+ .global start
+start:
+ /*
+ * DO NOT MODIFY. Image header expected by Linux boot-loaders.
+ */
+ b real_start /* branch to kernel start, magic */
+ .long 0 /* reserved */
+ .quad 0 /* Image load offset from start of RAM */
+ .quad 0 /* reserved */
+ .quad 0 /* reserved */
+
+real_start:
+ msr DAIFSet, 0xf /* Disable all interrupts */
+
+ /* Save the bootloader arguments in less-clobberable registers */
+ mov x21, x0 /* x21 := DTB, physical address */
+
+ /* Find out where we are */
+ ldr x0, =start
+ adr x19, start /* x19 := paddr (start) */
+ sub x20, x19, x0 /* x20 := phys-offset */
+
+ /* Using the DTB in the .dtb section? */
+#ifdef CONFIG_DTB_FILE
+ ldr x21, =_sdtb
+ add x21, x21, x20 /* x21 := paddr(DTB) */
+#endif
+
+ /* Are we the boot CPU? */
+ mov x22, #0 /* x22 := CPU ID */
+ mrs x0, mpidr_el1
+ tbz x0, 31, boot_cpu /* Multiprocessor extension supported? */
+ tbnz x0, 30, boot_cpu /* Uniprocessor system? */
+
+ mov x13, #(0xff << 24)
+ bics x22, x0, x13 /* Mask out flags to get CPU ID */
+ b.eq boot_cpu /* If we're CPU 0, boot now */
+
+ /* Non-boot CPUs wait here to be woken up one at a time. */
+1: dsb sy
+ ldr x0, =smp_up_cpu /* VA of gate */
+ add x0, x0, x20 /* PA of gate */
+ ldr x1, [x0] /* Which CPU is being booted? */
+ cmp x1, x22 /* Is it us? */
+ b.eq 2f
+ wfe
+ b 1b
+2:
+
+boot_cpu:
+#ifdef EARLY_UART_ADDRESS
+ ldr x23, =EARLY_UART_ADDRESS /* x23 := UART base address */
+ cbnz x22, 1f
+ bl init_uart /* CPU 0 sets up the UART too */
+1: PRINT("- CPU ")
+ mov x0, x22
+ bl putn
+ PRINT(" booting -\r\n")
+#endif
+
+ PRINT("- Current EL ")
+ mrs x0, CurrentEL
+ bl putn
+ PRINT(" -\r\n")
+
+ /* Are we in EL3 */
+ mrs x0, CurrentEL
+ cmp x0, #PSR_MODE_EL3t
+ ccmp x0, #PSR_MODE_EL3h, #0x4, ne
+ b.eq 1f /* Yes */
+
+ /* Are we in EL2 */
+ cmp x0, #PSR_MODE_EL2t
+ ccmp x0, #PSR_MODE_EL2h, #0x4, ne
+ b.eq 2f /* Yes */
+
+ /* Otherwise, it must have been EL0 or EL1 */
+ PRINT("- CPU is not in EL3 or EL2 -\r\n")
+ b fail
+
+1: PRINT("- Started in EL3 -\r\n- Entering EL2 -\r\n")
+ ldr x1, =enter_el2_mode /* VA of function */
+ add x1, x1, x20 /* PA of function */
+ adr x30, el2 /* Set return address for call */
+ br x1 /* Call function */
+
+2: PRINT("- Started in EL2 mode -\r\n")
+
+el2:
+ /* Zero BSS On the boot CPU to avoid nasty surprises */
+ cbnz x22, skip_bss
+
+ PRINT("- Zero BSS -\r\n")
+ ldr x0, =__bss_start /* Load start & end of bss */
+ ldr x1, =__bss_end
+ add x0, x0, x20 /* Apply physical offset */
+ add x1, x1, x20
+
+1: str xzr, [x0], #8
+ cmp x0, x1
+ b.lo 1b
+
+skip_bss:
+
+ PRINT("- Setting up control registers -\r\n")
+
+ /* Set up memory attribute type tables */
+ ldr x0, =MAIRVAL
+ msr mair_el2, x0
+
+ /* Set up the HTCR:
+ * PASize -- 4G
+ * Top byte is used
+ * PT walks use Outer-Shareable accesses,
+ * PT walks are write-back, no-write-allocate in both cache levels,
+ * Full 64-bit address space goes through this table. */
+ ldr x0, =0x80802500
+ msr tcr_el2, x0
+
+ /* Set up the HSCTLR:
+ * Exceptions in LE ARM,
+ * Low-latency IRQs disabled,
+ * Write-implies-XN disabled (for now),
+ * D-cache disabled (for now),
+ * I-cache enabled,
+ * Alignment checking enabled,
+ * MMU translation disabled (for now). */
+ ldr x0, =(HSCTLR_BASE|SCTLR_A)
+ msr SCTLR_EL2, x0
+
+ /* Write Xen's PT's paddr into the HTTBR */
+ ldr x4, =xen_pgtable
+ add x4, x4, x20 /* x4 := paddr (xen_pagetable) */
+ msr TTBR0_EL2, x4
+
+ /* Non-boot CPUs don't need to rebuild the pagetable */
+ cbnz x22, pt_ready
+
+ ldr x1, =xen_first
+ add x1, x1, x20 /* x1 := paddr (xen_first) */
+ mov x3, #PT_PT /* x2 := table map of xen_first */
+ orr x2, x1, x3 /* (+ rights for linear PT) */
+ str x2, [x4, #0] /* Map it in slot 0 */
+
+ mov x4, x1 /* Next level into xen_first */
+
+ /* console fixmap */
+#ifdef EARLY_UART_ADDRESS
+ ldr x1, =xen_fixmap
+ add x1, x1, x20 /* x1 := paddr (xen_fixmap) */
+ lsr x2, x23, #12
+ lsl x2, x2, #12 /* 4K aligned paddr of UART */
+ mov x3, #PT_DEV_L3
+ orr x2, x2, x3 /* x2 := 4K dev map including UART */
+ str x2, [x1, #(FIXMAP_CONSOLE*8)] /* Map it in the first fixmap's
slot */
+#endif
+
+ /* Build the baseline idle pagetable's first-level entries */
+ ldr x1, =xen_second
+ add x1, x1, x20 /* x1 := paddr (xen_second) */
+ mov x3, #PT_PT /* x2 := table map of xen_second */
+ orr x2, x1, x3 /* (+ rights for linear PT) */
+ str x2, [x4, #0] /* Map it in slot 0 */
+ add x2, x2, #0x1000
+ str x2, [x4, #8] /* Map 2nd page in slot 1 */
+ add x2, x2, #0x1000
+ str x2, [x4, #16] /* Map 3rd page in slot 2 */
+ add x2, x2, #0x1000
+ str x2, [x4, #24] /* Map 4th page in slot 3 */
+
+ /* Now set up the second-level entries */
+ mov x3, #PT_MEM
+ orr x2, x19, x3 /* x2 := 2MB normal map of Xen */
+ orr x4, xzr, x19, lsr #18
+ str x2, [x1, x4] /* Map Xen there */
+ ldr x4, =start
+ lsr x4, x4, #18 /* Slot for vaddr(start) */
+ str x2, [x1, x4] /* Map Xen there too */
+
+ /* xen_fixmap pagetable */
+ ldr x2, =xen_fixmap
+ add x2, x2, x20 /* x2 := paddr (xen_fixmap) */
+ mov x3, #PT_PT
+ orr x2, x2, x3 /* x2 := table map of xen_fixmap */
+ add x4, x4, #8
+ str x2, [x1, x4] /* Map it in the fixmap's slot */
+
+ lsr x2, x21, #21
+ lsl x2, x2, #21 /* 2MB-aligned paddr of DTB */
+ mov x3, #PT_MEM /* x2 := 2MB RAM incl. DTB */
+ orr x2, x2, x3
+ add x4, x4, #8
+ str x2, [x1, x4] /* Map it in the early boot slot */
+
+pt_ready:
+ PRINT("- Turning on paging -\r\n")
+
+ ldr x1, =paging /* Explicit vaddr, not RIP-relative */
+ mrs x0, SCTLR_EL2
+ orr x0, x0, #SCTLR_M /* Enable MMU */
+ orr x0, x0, #SCTLR_C /* Enable D-cache */
+ dsb sy /* Flush PTE writes and finish reads */
+ msr SCTLR_EL2, x0 /* now paging is enabled */
+ isb /* Now, flush the icache */
+ br x1 /* Get a proper vaddr into PC */
+paging:
+
+#ifdef EARLY_UART_ADDRESS
+ /* Use a virtual address to access the UART. */
+ ldr x23, =FIXMAP_ADDR(FIXMAP_CONSOLE)
+#endif
+
+ PRINT("- Ready -\r\n")
+
+ /* The boot CPU should go straight into C now */
+ cbz x22, launch
+
+ /* Non-boot CPUs need to move on to the relocated pagetables */
+ ldr x4, =boot_ttbr /* VA of TTBR0_EL2 stashed by CPU 0 */
+ add x4, x4, x20 /* PA of it */
+ ldr x4, [x4] /* Actual value */
+ dsb sy
+ msr TTBR0_EL2, x4
+ dsb sy
+ isb
+ tlbi alle2
+ dsb sy /* Ensure completion of TLB flush */
+ isb
+
+ /* Non-boot CPUs report that they've got this far */
+ ldr x0, =ready_cpus
+1: ldaxr x1, [x0] /* { read # of ready CPUs } */
+ add x1, x1, #1 /* Atomically { ++ } */
+ stlxr w2, x1, [x0] /* { writeback } */
+ cbnz w2, 1b
+ dsb sy
+ dc cvac, x0 /* Flush D-Cache */
+ dsb sy
+
+ /* Here, the non-boot CPUs must wait again -- they're now running on
+ * the boot CPU's pagetables so it's safe for the boot CPU to
+ * overwrite the non-relocated copy of Xen. Once it's done that,
+ * and brought up the memory allocator, non-boot CPUs can get their
+ * own stacks and enter C. */
+1: wfe
+ dsb sy
+ ldr x0, =smp_up_cpu
+ ldr x1, [x0] /* Which CPU is being booted? */
+ cmp x1, x12 /* Is it us? */
+ b.ne 1b
+
+launch:
+ ldr x0, =init_stack /* Find the boot-time stack */
+ ldr x0, [x0]
+ add x0, x0, #STACK_SIZE /* (which grows down from the top). */
+ sub x0, x0, #CPUINFO_sizeof /* Make room for CPU save record */
+ mov sp, x0
+
+ mov x0, x20 /* Marshal args: - phys_offset */
+ mov x1, x21 /* - FDT */
+ mov x2, x22 /* - CPU ID */
+ cbz x22, start_xen /* and disappear into the land of C */
+ b start_secondary /* (to the appropriate entry point) */
+
+/* Fail-stop
+ * r0: string explaining why */
+fail: PRINT("- Boot failed -\r\n")
+1: wfe
+ b 1b
+
+#ifdef EARLY_UART_ADDRESS
+
+/* Bring up the UART. Specific to the PL011 UART.
+ * Clobbers r0-r2 */
+init_uart:
+ mov x1, #0x0
+ strh w1, [x23, #0x24] /* -> UARTIBRD (Baud divisor fraction) */
+ mov x1, #0x4 /* 7.3728MHz / 0x4 == 16 * 115200 */
+ strh w1, [x23, #0x24] /* -> UARTIBRD (Baud divisor integer) */
+ mov x1, #0x60 /* 8n1 */
+ strh w1, [x23, #0x24] /* -> UARTLCR_H (Line control) */
+ ldr x1, =0x00000301 /* RXE | TXE | UARTEN */
+ strh w1, [x23, #0x30] /* -> UARTCR (Control Register) */
+ adr x0, 1f
+ b puts
+1: .asciz "- UART enabled -\r\n"
+ .align 4
+
+/* Print early debug messages. Specific to the PL011 UART.
+ * r0: Nul-terminated string to print.
+ * Clobbers r0-r2 */
+puts:
+ ldrh w2, [x23, #0x18] /* <- UARTFR (Flag register) */
+ tst w2, #0x8 /* Check BUSY bit */
+ b.ne puts /* Wait for the UART to be ready */
+ ldrb w2, [x0], #1 /* Load next char */
+ cbz w2, 1f /* Exit on nul */
+ str w2, [x23] /* -> UARTDR (Data Register) */
+ b puts
+1:
+ ret
+
+/* Print a 32-bit number in hex. Specific to the PL011 UART.
+ * r0: Number to print.
+ * clobbers r0-r3 */
+putn:
+ adr x1, hex
+ mov x3, #8
+1: ldrh w2, [x23, #0x18] /* <- UARTFR (Flag register) */
+ tst w2, #0x8 /* Check BUSY bit */
+ b.ne 1b /* Wait for the UART to be ready */
+ and x2, x0, #0xf0000000 /* Mask off the top nybble */
+ lsr x2, x2, #28
+ ldrb w2, [x1, x2] /* Convert to a char */
+ strb w2, [x23] /* -> UARTDR (Data Register) */
+ lsl x0, x0, #4 /* Roll it through one nybble at a time */
+ subs x3, x3, #1
+ b.ne 1b
+ ret
+
+hex: .ascii "0123456789abcdef"
+ .align 2
+
+#else /* EARLY_UART_ADDRESS */
+
+init_uart:
+.global early_puts
+early_puts:
+puts:
+putn: mov pc, lr
+
+#endif /* EARLY_UART_ADDRESS */
diff --git a/xen/arch/arm/arm64/mode_switch.S b/xen/arch/arm/arm64/mode_switch.S
new file mode 100644
index 0000000..4c38181
--- /dev/null
+++ b/xen/arch/arm/arm64/mode_switch.S
@@ -0,0 +1,83 @@
+/*
+ * xen/arch/arm/arm64/mode_switch.S
+ *
+ * Start-of day code to take a CPU from EL3 to EL2. Largely taken from
+ * bootwrapper.
+ *
+ * Ian Campbell <ian.campbell@xxxxxxxxxx>
+ * Copyright (c) 2012 Citrix Systems.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/config.h>
+#include <asm/page.h>
+#include <asm/asm_defns.h>
+
+/* Get up a CPU into EL2. Clobbers x0-x3.
+ *
+ * Expects x22 == CPU number
+ * Expects x30 == EL2 entry point
+ *
+ * This code is specific to the VE model, and not intended to be used
+ * on production systems. As such it's a bit hackier than the main
+ * boot code in head.S. In future it will be replaced by better
+ * integration with the bootloader/firmware so that Xen always starts
+ * at EL2.
+ */
+
+.globl enter_el2_mode
+enter_el2_mode:
+ mov x0, #0x30 // RES1
+ orr x0, x0, #(1 << 0) // Non-secure EL1
+ orr x0, x0, #(1 << 8) // HVC enable
+ orr x0, x0, #(1 << 10) // 64-bit EL2
+ msr scr_el3, x0
+
+ msr cptr_el3, xzr // Disable copro. traps to EL3
+
+ ldr x0, =0x01800000 // 24Mhz
+ msr cntfrq_el0, x0
+
+ /*
+ * Check for the primary CPU to avoid a race on the distributor
+ * registers.
+ */
+ cbnz x22, 1f
+
+ ldr x1, =(GIC_BASE_ADDRESS+GIC_DR_OFFSET) // GICD_CTLR
+ mov w0, #3 // EnableGrp0 | EnableGrp1
+ str w0, [x1]
+
+1: ldr x1, =(GIC_BASE_ADDRESS+GIC_DR_OFFSET+0x80) // GICD_IGROUPR
+ mov w0, #~0 // Grp1 interrupts
+ str w0, [x1], #4
+ b.ne 2f // Only local interrupts for
secondary CPUs
+ str w0, [x1], #4
+ str w0, [x1], #4
+
+2: ldr x1, =(GIC_BASE_ADDRESS+GIC_CR_OFFSET) // GICC_CTLR
+ ldr w0, [x1]
+ mov w0, #3 // EnableGrp0 | EnableGrp1
+ str w0, [x1]
+
+ mov w0, #1 << 7 // allow NS access to GICC_PMR
+ str w0, [x1, #4] // GICC_PMR
+
+ msr sctlr_el2, xzr
+
+ /*
+ * Prepare the switch to the EL2_SP1 mode from EL3
+ */
+ msr elr_el3, x30 // Return to desired function
+ mov x1, #0x3c9 // EL2_SP1 | D | A | I | F
+ msr spsr_el3, x1
+ eret
diff --git a/xen/arch/arm/xen.lds.S b/xen/arch/arm/xen.lds.S
index 50e0c4b..5136b79 100644
--- a/xen/arch/arm/xen.lds.S
+++ b/xen/arch/arm/xen.lds.S
@@ -11,7 +11,13 @@
ENTRY(start)
-OUTPUT_ARCH(arm)
+#if defined(__arm__)
+#define FORMAT arm
+#elif defined(__aarch64__)
+#define FORMAT aarch64
+#endif
+
+OUTPUT_ARCH(FORMAT)
PHDRS
{
@@ -85,9 +91,9 @@ SECTIONS
*(.init.data.rel)
*(.init.data.rel.*)
- . = ALIGN(4);
+ . = ALIGN(BYTES_PER_LONG);
__CTOR_LIST__ = .;
- LONG((__CTOR_END__ - __CTOR_LIST__) / 4 - 2)
+ LONG((__CTOR_END__ - __CTOR_LIST__) / BYTES_PER_LONG - 2)
*(.ctors)
LONG(0)
__CTOR_END__ = .;
diff --git a/xen/include/asm-arm/page.h b/xen/include/asm-arm/page.h
index cd74950..45ded77 100644
--- a/xen/include/asm-arm/page.h
+++ b/xen/include/asm-arm/page.h
@@ -38,6 +38,7 @@
*/
#define MAIR0VAL 0xeeaa4400
#define MAIR1VAL 0xff000004
+#define MAIRVAL (MAIR0VAL|MAIR1VAL<<32)
/*
* Attribute Indexes.
diff --git a/xen/include/public/arch-arm.h b/xen/include/public/arch-arm.h
index 6ae1009..5306f79 100644
--- a/xen/include/public/arch-arm.h
+++ b/xen/include/public/arch-arm.h
@@ -172,6 +172,8 @@ typedef uint64_t xen_callback_t;
/* 0-4: Mode */
#define PSR_MODE_MASK 0x1f
+
+/* 32 bit modes */
#define PSR_MODE_USR 0x10
#define PSR_MODE_FIQ 0x11
#define PSR_MODE_IRQ 0x12
@@ -182,6 +184,18 @@ typedef uint64_t xen_callback_t;
#define PSR_MODE_UND 0x1b
#define PSR_MODE_SYS 0x1f
+/* 64 bit modes */
+#ifdef CONFIG_ARM_64
+#define PSR_MODE_BIT 0x10 /* Set iff AArch32 */
+#define PSR_MODE_EL3h 0x0d
+#define PSR_MODE_EL3t 0x0c
+#define PSR_MODE_EL2h 0x09
+#define PSR_MODE_EL2t 0x08
+#define PSR_MODE_EL1h 0x05
+#define PSR_MODE_EL1t 0x04
+#define PSR_MODE_EL0t 0x00
+#endif
+
#define PSR_THUMB (1<<5) /* Thumb Mode enable */
#define PSR_FIQ_MASK (1<<6) /* Fast Interrupt mask */
#define PSR_IRQ_MASK (1<<7) /* Interrupt mask */
diff --git a/xen/include/public/hvm/save.h b/xen/include/public/hvm/save.h
index 5538d8e..cc8b5fd 100644
--- a/xen/include/public/hvm/save.h
+++ b/xen/include/public/hvm/save.h
@@ -102,7 +102,7 @@ DECLARE_HVM_SAVE_TYPE(END, 0, struct hvm_save_end);
#if defined(__i386__) || defined(__x86_64__)
#include "../arch-x86/hvm/save.h"
-#elif defined(__arm__)
+#elif defined(__arm__) || defined(__aarch64__)
#include "../arch-arm/hvm/save.h"
#else
#error "unsupported architecture"
diff --git a/xen/include/public/xen.h b/xen/include/public/xen.h
index c4d08d6..e9431e2 100644
--- a/xen/include/public/xen.h
+++ b/xen/include/public/xen.h
@@ -31,7 +31,7 @@
#if defined(__i386__) || defined(__x86_64__)
#include "arch-x86/xen.h"
-#elif defined(__arm__)
+#elif defined(__arm__) || defined (__aarch64__)
#include "arch-arm.h"
#else
#error "Unsupported architecture"
diff --git a/xen/include/xen/libelf.h b/xen/include/xen/libelf.h
index e8f6508..218bb18 100644
--- a/xen/include/xen/libelf.h
+++ b/xen/include/xen/libelf.h
@@ -23,7 +23,7 @@
#ifndef __XEN_LIBELF_H__
#define __XEN_LIBELF_H__
-#if defined(__i386__) || defined(__x86_64__) || defined(__arm__)
+#if defined(__i386__) || defined(__x86_64__) || defined(__arm__) ||
defined(__aarch64__)
#define XEN_ELF_LITTLE_ENDIAN
#else
#error define architectural endianness
--
1.7.2.5
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |