[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Debootstrapping a rootfs for Xen on FastModels A15



On 3 April 2013 15:41, Stefano Stabellini
<stefano.stabellini@xxxxxxxxxxxxx> wrote:
> On Wed, 3 Apr 2013, Sander Bogaert wrote:
>> On 2 April 2013 15:47, Stefano Stabellini
>> <stefano.stabellini@xxxxxxxxxxxxx> wrote:
>> > On Tue, 2 Apr 2013, Sander Bogaert wrote:
>> >> I did however try the branches you linked but without much progress.
>> >> Using the xen and kernel branches you linked together with this config
>> >> ( http://xenbits.xen.org/people/sstabellini/config where I selected
>> >> the defaults for newer kernel options ) Xen crashes. I attached a log;
>> >> log.txt. Isn't this the exact same setup as you are using?
>> >
>> > I am attaching the kernel config I am using with that branch.
>> > However I tried the one linked above, using the default for all the
>> > newer kernel options, and I can still boot Dom0 to a bash prompt :-S
>> > For the sake of completeness I am also going to attach my DTS (that is
>> > SMP ready).
>> >
>>
>> Thanks a lot for all your help!
>>
>> I used the files you supplied, build myself a A15x2 model and still
>> get a crash booting dom0, it is one I never seen before. I attached
>> the Xen and dom0 logs. The isue seems to be
>> "Unhandled fault: external abort on non-linefetch (0x1008) at 0xc8820084
>> Internal error: : 1008 [#1] SMP ARM"
>>
>> Any idea what could still be different between our setups? Maybe the
>> compilers? I'm using arm-linux-gnueabi-gcc (Debian 4.7.2-4) 4.7.2 for
>> crosscompilation. The model was built with gcc (Debian 4.4.7-2) 4.4.7.
>>
>> Kernel is the branch you indicated with the .config you supplied.
>> Xen is the branch you indicated.
>> I'm using the dts you supplied and compile it to a dtb with DTC 1.3.0.
>
> Ah yes, I know about that one :)
> The problem is the DTS, you need this simple fix for the network card
> entry:
>
> diff --git a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi 
> b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> index ac870fb..d6d3c47 100644
> --- a/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> +++ b/arch/arm/boot/dts/vexpress-v2m-rs1.dtsi
> @@ -47,7 +47,7 @@
>                 };
>
>                 ethernet@2,02000000 {
> -                       compatible = "smsc,lan9118", "smsc,lan9115";
> +                       compatible = "smsc,lan91c111";
>                         reg = <2 0x02000000 0x10000>;
>                         interrupts = <15>;
>                         phy-mode = "mii";

Thanks, this fixed the error. Now I'm back at square one... :) Crashing with:

VFS: Cannot open root device "mmcblk0" or unknown-block(0,0): error -6
Please append a correct "root=" boot option; here are the available partitions:
Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)

I attached the whole log. I've been having this with a lot of
different kernels & xen branches. I'm using your device tree,.. is it
possible this has something to do with the rootfs? I don't know how I
could mess up the debootstrapping, it wasn't difficult but that the
only thing that could differ?

Thanks again

Attachment: dom0_log.txt
Description: Text document

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.