[Xen-devel] [RFC 23/29] xen/arm: Add versatile express platform

[Julien Grall <julien.grall@xxxxxxxxxx>]

This platform contains nearly nothing specific except the reset function.

Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
---
 xen/arch/arm/platforms/vexpress.c        |   26 ++++++++++++++++++++++++++
 xen/arch/arm/shutdown.c                  |   14 --------------
 xen/include/asm-arm/config.h             |    3 ---
 xen/include/asm-arm/platforms/vexpress.h |    3 +++
 4 files changed, 29 insertions(+), 17 deletions(-)

diff --git a/xen/arch/arm/platforms/vexpress.c 
b/xen/arch/arm/platforms/vexpress.c
index fd4ce74..7a9cfec 100644
--- a/xen/arch/arm/platforms/vexpress.c
+++ b/xen/arch/arm/platforms/vexpress.c
@@ -18,6 +18,7 @@
  */
 
 #include <asm/platforms/vexpress.h>
+#include <asm/platform.h>
 #include <xen/mm.h>
 
 #define DCC_SHIFT      26
@@ -90,6 +91,31 @@ out:
     return ret;
 }
 
+static void vexpress_reset(void)
+{
+    /* Use the SP810 system controller to force a reset */
+    volatile uint32_t *sp810;
+    set_fixmap(FIXMAP_MISC, SP810_ADDRESS >> PAGE_SHIFT, DEV_SHARED);
+    sp810 = ((uint32_t *)
+             (FIXMAP_ADDR(FIXMAP_MISC) + (SP810_ADDRESS & ~PAGE_MASK)));
+    sp810[0] = 0x3; /* switch to slow mode */
+    dsb(); isb();
+    sp810[1] = 0x1; /* writing any value to SCSYSSTAT reg will reset system */
+    dsb(); isb();
+    clear_fixmap(FIXMAP_MISC);
+}
+
+static const char const *vexpress_dt_compat[] __initdata =
+{
+    "arm,vexpress",
+    NULL
+};
+
+PLATFORM_START(vexpress, "VERSATILE EXPRESS")
+    .compatible = vexpress_dt_compat,
+    .reset = vexpress_reset,
+PLATFORM_END
+
 /*
  * Local variables:
  * mode: C
diff --git a/xen/arch/arm/shutdown.c b/xen/arch/arm/shutdown.c
index a5c2085..cf42902 100644
--- a/xen/arch/arm/shutdown.c
+++ b/xen/arch/arm/shutdown.c
@@ -3,25 +3,11 @@
 #include <xen/cpu.h>
 #include <xen/delay.h>
 #include <xen/lib.h>
-#include <xen/mm.h>
 #include <xen/smp.h>
 #include <asm/platform.h>
 
 static void raw_machine_reset(void)
 {
-    /* XXX get this from device tree */
-#ifdef SP810_ADDRESS
-    /* Use the SP810 system controller to force a reset */
-    volatile uint32_t *sp810;
-    set_fixmap(FIXMAP_MISC, SP810_ADDRESS >> PAGE_SHIFT, DEV_SHARED);
-    sp810 = ((uint32_t *)
-             (FIXMAP_ADDR(FIXMAP_MISC) + (SP810_ADDRESS & ~PAGE_MASK)));
-    sp810[0] = 0x3; /* switch to slow mode */
-    dsb(); isb();
-    sp810[1] = 0x1; /* writing any value to SCSYSSTAT reg will reset system */
-    dsb(); isb();
-    clear_fixmap(FIXMAP_MISC);
-#endif
     platform_reset();
 }
 
diff --git a/xen/include/asm-arm/config.h b/xen/include/asm-arm/config.h
index e49aac1..1f327c7 100644
--- a/xen/include/asm-arm/config.h
+++ b/xen/include/asm-arm/config.h
@@ -149,9 +149,6 @@ extern unsigned long frametable_virt_end;
 #define GIC_CR_OFFSET 0x2000
 #define GIC_HR_OFFSET 0x4000 /* Guess work 
http://lists.infradead.org/pipermail/linux-arm-kernel/2011-September/064219.html
 */
 #define GIC_VR_OFFSET 0x6000 /* Virtual Machine CPU interface) */
-/* Board-specific: base address of system controller */
-#define SP810_ADDRESS 0x1C020000
-
 
 #endif /* __ARM_CONFIG_H__ */
 /*
diff --git a/xen/include/asm-arm/platforms/vexpress.h 
b/xen/include/asm-arm/platforms/vexpress.h
index 67f8fef..5cf3aba 100644
--- a/xen/include/asm-arm/platforms/vexpress.h
+++ b/xen/include/asm-arm/platforms/vexpress.h
@@ -23,6 +23,9 @@
 #define V2M_SYS_CFG_OSC4      4
 #define V2M_SYS_CFG_OSC5      5
 
+/* Board-specific: base address of system controller */
+#define SP810_ADDRESS 0x1C020000
+
 #ifndef __ASSEMBLY__
 #include <xen/inttypes.h>
 
-- 
Julien Grall


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel