[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] WARNING: at /home/konrad/linux-linus/kernel/time/tick-sched.c:935 tick_nohz_idle_exit+0x195/0x1b0() on v3.10-rc3



Hello,

I had not yet done a full git bisection run but since this is new code added
in v3.10. I did not see this in v3.9. I think I saw this in v3.10-rc1 but never
got to look at it in depth.

Either way on a PV guest, if I do:

echo 0 > /sys/devices/system/cpu/cpu1/online
echo 1 > /sys/devices/system/cpu/cpu1/online

I get this fat warning:

[   39.946760] Broke affinity for irq 16
[   40.071242] installing Xen timer for CPU 1
[   40.076109] cpu 1 spinlock event irq 48
[   40.081207] ------------[ cut here ]------------
[   40.085841] WARNING: at 
/home/konrad/linux-linus/kernel/time/tick-sched.c:935 
tick_nohz_idle_exit+0x195/0x1b0()
[   40.095970] Modules linked in: dm_multipath dm_mod xen_evtchn 
iscsi_boot_sysfs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi libcrc32c 
crc32c i915 radeon sg sd_mod mperf skge e1000 sata_nv nouveau ata_generic 
libata fbcon tileblit font bitblit scsi_mod ttm softcursor drm_kms_helper 
mxm_wmi video wmi xen_blkfront xen_netfront fb_sys_fops sysimgblt sysfillrect 
syscopyarea xenfs xen_privcmd
[   40.130893] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 
3.10.0-rc3upstream-00068-gdcdbe33 #1
[   40.139212] Hardware name: BIOSTAR Group N61PB-M2S/N61PB-M2S, BIOS 6.00 PG 
09/03/2009
[   40.147098]  ffffffff8193b448 ffff880039da5e60 ffffffff816707c8 
ffff880039da5ea0
[   40.154550]  ffffffff8108ce8b ffff880039da4010 ffff88003fa8e500 
ffff880039da4010
[   40.162004]  0000000000000001 ffff880039da4000 ffff880039da4010 
ffff880039da5eb0
[   40.169458] Call Trace:
[   40.171977]  [<ffffffff816707c8>] dump_stack+0x19/0x1b
[   40.177175]  [<ffffffff8108ce8b>] warn_slowpath_common+0x6b/0xa0
[   40.183243]  [<ffffffff8108ced5>] warn_slowpath_null+0x15/0x20
[   40.189134]  [<ffffffff810e4745>] tick_nohz_idle_exit+0x195/0x1b0
[   40.195287]  [<ffffffff810da755>] cpu_startup_entry+0x205/0x250
[   40.201268]  [<ffffffff81661070>] cpu_bringup_and_idle+0x13/0x15
[   40.207332] ---[ end trace 915c8c486004dda1 ]---


which I presume is b/c the code does not expect to be run _after_ it has
offlined. However, under the PV code, the mechanism is that that a CPU
that has been offlined, can resume (if it is onlined). If you look at:

445 static void __cpuinit xen_play_dead(void) /* used only with HOTPLUG_CPU */  
    
446 {                                                                           
    
447         play_dead_common();                                                 
    
448         HYPERVISOR_vcpu_op(VCPUOP_down, smp_processor_id(), NULL);          
    
449         cpu_bringup();                                                      
    
450 }                               

That is called right after the CPU is put to sleep and the hypercall 
VCPUOP_down blocks - until the CPU is brough back up. And which point
we end up calling cpu_bringup - which sets up the clockevets, timers, etc.

I am wondering if part of this is that the ts->inidle gets reset
b/c we end up resetting all the timers but then when xen_play_dead
exits, it ends up right back in the cpu_idle_loop() loop - and we
call tick_nohz_idle_exit().

Thoughts?

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.