[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2 3/5] hvmloader: Remove minimum size for BARs to relocate to 64-bit space



Allow devices with BARs less than 512MiB to be relocated to high memory.

This will only be invoked if there is not enough low MMIO space to map
the device, and will be done preferentially to large devices first; so
in all likelihood only large devices will be remapped anyway.

This is needed to work-around the issue of qemu-xen not being able to
handle moving guest memory around to resize the MMIO hole.  The default
MMIO hole size is less than 256MiB.

Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx>
CC: Ian Jackson <ian.jackson@xxxxxxxxxx>
CC: Ian Campbell <ian.campbell@xxxxxxxxxx>
CC: Stefano Stabellini <stefano.stabellini@xxxxxxxxxx>
CC: Hanweidong <hanweidong@xxxxxxxxxx>
---
 tools/firmware/hvmloader/config.h |    1 -
 tools/firmware/hvmloader/pci.c    |    5 ++---
 2 files changed, 2 insertions(+), 4 deletions(-)

diff --git a/tools/firmware/hvmloader/config.h 
b/tools/firmware/hvmloader/config.h
index 8143d6f..6641197 100644
--- a/tools/firmware/hvmloader/config.h
+++ b/tools/firmware/hvmloader/config.h
@@ -55,7 +55,6 @@ extern struct bios_config ovmf_config;
 /* MMIO hole: Hardcoded defaults, which can be dynamically expanded. */
 #define PCI_MEM_START       0xf0000000
 #define PCI_MEM_END         0xfc000000
-#define PCI_MIN_BIG_BAR_SIZE          0x20000000
 
 extern unsigned long pci_mem_start, pci_mem_end;
 
diff --git a/tools/firmware/hvmloader/pci.c b/tools/firmware/hvmloader/pci.c
index 7f306a1..a483b02 100644
--- a/tools/firmware/hvmloader/pci.c
+++ b/tools/firmware/hvmloader/pci.c
@@ -265,9 +265,8 @@ void pci_setup(void)
         if ( (bar_data & PCI_BASE_ADDRESS_SPACE) ==
              PCI_BASE_ADDRESS_SPACE_MEMORY )
         {
-            /* Mapping high memory if PCI deivce is 64 bits bar and the bar 
size
-               is larger than 512M */
-            if (using_64bar && (bar_sz > PCI_MIN_BIG_BAR_SIZE)) {
+            /* Mapping high memory if PCI device is 64 bits bar */
+            if (using_64bar) {
                 if ( high_mem_resource.base & (bar_sz - 1) )
                     high_mem_resource.base = high_mem_resource.base - 
                         (high_mem_resource.base & (bar_sz - 1)) + bar_sz;
-- 
1.7.9.5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.