[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v4 2/8] hvmloader: Make the printfs more informative
On Fri, 21 Jun 2013, George Dunlap wrote: > * Warn that you're relocating some BARs to 64-bit > > * Warn that you're relocating guest pages, and how many > > * Include upper 32-bits of the base register when printing the bar > placement info > > v4: > - Move message about relocating guest pages into loop, include number > of pages and guest paddr > - Fixed minor brace style issue > > Signed-off-by: George Dunlap <george.dunlap@xxxxxxxxxxxxx> > CC: Ian Campbell <ian.campbell@xxxxxxxxxx> > CC: Ian Jackson <ian.jackson@xxxxxxxxxx> > CC: Stefano Stabellini <stefano.stabellini@xxxxxxxxxx> > CC: Hanweidong <hanweidong@xxxxxxxxxx> > CC: Keir Fraser <keir@xxxxxxx> > --- > tools/firmware/hvmloader/pci.c | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/tools/firmware/hvmloader/pci.c b/tools/firmware/hvmloader/pci.c > index c1cb1e9..44168e2 100644 > --- a/tools/firmware/hvmloader/pci.c > +++ b/tools/firmware/hvmloader/pci.c > @@ -214,7 +214,11 @@ void pci_setup(void) > pci_mem_start <<= 1; > > if ( (pci_mem_start << 1) != 0 ) > + { > + printf("Low MMIO hole not large enough for all devices," > + " relocating some BARs to 64-bit\n"); > bar64_relocate = 1; > + } > > /* Relocate RAM that overlaps PCI space (in 64k-page chunks). */ > while ( (pci_mem_start >> PAGE_SHIFT) < hvm_info->low_mem_pgend ) > @@ -227,6 +231,11 @@ void pci_setup(void) > if ( hvm_info->high_mem_pgend == 0 ) > hvm_info->high_mem_pgend = 1ull << (32 - PAGE_SHIFT); > hvm_info->low_mem_pgend -= nr_pages; > + printf("Relocating 0x%x pages from "PRIllx" to "PRIllx\ > + " for lowmem MMIO hole\n", > + nr_pages, > + PRIllx_arg(((uint64_t)hvm_info->low_mem_pgend)<<PAGE_SHIFT), > + PRIllx_arg(((uint64_t)hvm_info->high_mem_pgend)<<PAGE_SHIFT)); > xatp.domid = DOMID_SELF; > xatp.space = XENMAPSPACE_gmfn_range; > xatp.idx = hvm_info->low_mem_pgend; This wasn't exactly what I suggested but it's correct. Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx> > @@ -301,10 +310,10 @@ void pci_setup(void) > pci_writel(devfn, bar_reg, bar_data); > if (using_64bar) > pci_writel(devfn, bar_reg + 4, bar_data_upper); > - printf("pci dev %02x:%x bar %02x size "PRIllx": %08x\n", > + printf("pci dev %02x:%x bar %02x size "PRIllx": %x%08x\n", > devfn>>3, devfn&7, bar_reg, > PRIllx_arg(bar_sz), > - bar_data); > + bar_data_upper, bar_data); > > > /* Now enable the memory or I/O mapping. */ > -- > 1.7.9.5 > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |