|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH] xen: reuse the same pirq allocated when driver load first time
On Tue, 25 Jun 2013, DuanZhenzhong wrote:
> Stefano Stabellini wrote:
> > Trimming some of the people in CC
> >
> > On Mon, 24 Jun 2013, Zhenzhong Duan wrote:
> >
> > > On 2013-06-20 22:21, Stefano Stabellini wrote:
> > >
> > > > On Thu, 20 Jun 2013, Zhenzhong Duan wrote:
> > > >
> > > > > On 2013-06-05 20:50, Stefano Stabellini wrote:
> > > > >
> > > > > > On Wed, 5 Jun 2013, Zhenzhong Duan wrote:
> > > > > >
> > > > > > > Stefano Stabellini wrote:
> > > > > > >
> > > > > > > On Tue, 21 May 2013, Stefano Stabellini wrote:
> > > > > > > On Tue, 21 May 2013, Konrad Rzeszutek Wilk wrote:
> > > > > > > Looking at the hypervisor code I couldn't see anything
> > > > > > > obviously
> > > > > > > wrong.
> > > > > > > I think the culprit is "physdev_unmap_pirq":
> > > > > > >
> > > > > > > if ( is_hvm_domain(d) )
> > > > > > > {
> > > > > > > spin_lock(&d->event_lock);
> > > > > > > gdprintk(XENLOG_WARNING,"d%d, pirq: %d is %x %s, irq:
> > > > > > > %d\n",
> > > > > > > d->domain_id, pirq, domain_pirq_to_emuirq(d, pirq),
> > > > > > > domain_pirq_to_emuirq(d, pirq) == IRQ_UNBOUND ?
> > > > > > > "unbound" :
> > > > > > > "",
> > > > > > > domain_pirq_to_irq(d, pirq));
> > > > > > >
> > > > > > > if
> > > > > > > ( domain_pirq_to_emuirq(d, pirq) != IRQ_UNBOUND )
> > > > > > > ret = unmap_domain_pirq_emuirq(d, pirq);
> > > > > > > spin_unlock(&d->event_lock);
> > > > > > > if ( domid == DOMID_SELF || ret )
> > > > > > > goto free_domain;
> > > > > > >
> > > > > > > It always tells me unbound:
> > > > > > >
> > > > > > > (XEN) physdev.c:237:d14 14, pirq: 54 is ffffffff
> > > > > > > (XEN) irq.c:1873:d14 14, nr_pirqs: 56
> > > > > > > (XEN) physdev.c:237:d14 14, pirq: 53 is ffffffff
> > > > > > > (XEN) irq.c:1873:d14 14, nr_pirqs: 56
> > > > > > > (XEN) physdev.c:237:d14 14, pirq: 52 is ffffffff
> > > > > > > (XEN) irq.c:1873:d14 14, nr_pirqs: 56
> > > > > > > (XEN) physdev.c:237:d14 14, pirq: 51 is ffffffff
> > > > > > > (XEN) irq.c:1873:d14 14, nr_pirqs: 56
> > > > > > > (XEN) physdev.c:237:d14 14, pirq: 50 is ffffffff
> > > > > > > (XEN) irq.c:1873:d14 14, nr_pirqs: 56
> > > > > > > (a bit older debug code, so the 'unbound' does not show up here).
> > > > > > >
> > > > > > > Which means that the call to unmap_domain_pirq_emuirq does not
> > > > > > > happen.
> > > > > > > The checks in unmap_domain_pirq_emuirq also look to be depend
> > > > > > > on the code being IRQ_UNBOUND.
> > > > > > >
> > > > > > > In other words, all of that code looks to only clear things when
> > > > > > > they are !IRQ_UNBOUND.
> > > > > > >
> > > > > > > But the other logic (IRQ_UNBOUND) looks to be missing a removal
> > > > > > > in the radix tree:
> > > > > > >
> > > > > > > if ( emuirq != IRQ_PT )
> > > > > > > radix_tree_delete(&d->arch.hvm_domain.emuirq_pirq,
> > > > > > > emuirq);
> > > > > > >
> > > > > > > And
> > > > > > > I think that is what is causing the leak - the radix tree
> > > > > > > needs to be pruned? Or perhaps the allocate_pirq should check
> > > > > > > the radix tree for IRQ_UNBOUND ones and re-use them?
> > > > > > > I think that you are looking in the wrong place.
> > > > > > > The issue is that QEMU doesn't call pt_msi_disable in
> > > > > > > pt_msgctrl_reg_write if (!val & PCI_MSI_FLAGS_ENABLE).
> > > > > > >
> > > > > > > The code above is correct as is because it is trying to handle
> > > > > > > emulated
> > > > > > > IRQs and MSIs, not real passthrough MSIs. They latter are not
> > > > > > > added to
> > > > > > > that radix tree, see physdev_hvm_map_pirq and physdev_map_pirq.
> > > > > > > This patch fixes the issue, I have only tested MSI (MSI-X
> > > > > > > completely
> > > > > > > untested).
> > > > > > >
> > > > > > >
> > > > > > > diff --git a/hw/pass-through.c b/hw/pass-through.c
> > > > > > > index 304c438..079e465 100644
> > > > > > > --- a/hw/pass-through.c
> > > > > > > +++ b/hw/pass-through.c
> > > > > > > @@ -3866,7 +3866,11 @@ static int pt_msgctrl_reg_write(struct
> > > > > > > pt_dev
> > > > > > > *ptdev,
> > > > > > > ptdev->msi->flags |= PCI_MSI_FLAGS_ENABLE;
> > > > > > > }
> > > > > > > else
> > > > > > > - ptdev->msi->flags &= ~PCI_MSI_FLAGS_ENABLE;
> > > > > > > + {
> > > > > > > + if (ptdev->msi->flags & PT_MSI_MAPPED) {
> > > > > > > + pt_msi_disable(ptdev);
> > > > > > > + }
> > > > > > > + }
> > > > > > > /* pass through MSI_ENABLE bit when no MSI-INTx
> > > > > > > translation
> > > > > > > */
> > > > > > > if (!ptdev->msi_trans_en) {
> > > > > > > @@ -4013,6 +4017,8 @@ static int pt_msixctrl_reg_write(struct
> > > > > > > pt_dev
> > > > > > > *ptdev,
> > > > > > > pt_disable_msi_translate(ptdev);
> > > > > > > }
> > > > > > > pt_msix_update(ptdev);
> > > > > > > + } else if (!(*value & PCI_MSIX_ENABLE) &&
> > > > > > > ptdev->msix->enabled) {
> > > > > > > + pt_msix_delete(ptdev);
> > > > > > > Hi Stefano,
> > > > > > > I made a test with this patch, os reboot when driver reload. If
> > > > > > > use
> > > > > > > pt_msix_disable
> > > > > > > instead of pt_msix_delete, driver could be reloaded.
> > > > > > > But I still see some error in qemu.log and xen console. Seems four
> > > > > > > IRQs
> > > > > > > are not freed
> > > > > > > when unmap.
> > > > > > > --------------first load---------------------------
> > > > > > > pt_msix_update_one: pt_msix_update_one requested pirq = 103
> > > > > > > pt_msix_update_one: Update msix entry 0 with pirq 67 gvec 0
> > > > > > > pt_msix_update_one: pt_msix_update_one requested pirq = 102
> > > > > > > pt_msix_update_one: Update msix entry 1 with pirq 66 gvec 0
> > > > > > > pt_msix_update_one: pt_msix_update_one requested pirq = 101
> > > > > > > pt_msix_update_one: Update msix entry 2 with pirq 65 gvec 0
> > > > > > > pt_msix_update_one: pt_msix_update_one requested pirq = 100
> > > > > > > pt_msix_update_one: Update msix entry 3 with pirq 64 gvec 0
> > > > > > > ------------- first unload---------------------------
> > > > > > > pt_msix_disable: Unbind msix with pirq 67, gvec 0
> > > > > > > pt_msix_disable: Unmap msix with pirq 67
> > > > > > > pt_msix_disable: Error: Unmapping of MSI-X failed. [00:04.0]
> > > > > > > pt_msix_disable: Unbind msix with pirq 66, gvec 0
> > > > > > > pt_msix_disable: Unmap msix with pirq 66
> > > > > > > pt_msix_disable: Error: Unmapping of MSI-X failed. [00:04.0]
> > > > > > > pt_msix_disable: Unbind msix with pirq 65, gvec 0
> > > > > > > pt_msix_disable: Unmap msix with pirq 65
> > > > > > > pt_msix_disable: Error: Unmapping of MSI-X failed. [00:04.0]
> > > > > > > pt_msix_disable: Unbind msix with pirq 64, gvec 0
> > > > > > > pt_msix_disable: Unmap msix with pirq 64
> > > > > > > pt_msix_disable: Error: Unmapping of MSI-X failed. [00:04.0]
> > > > > > >
> > > > > > Can you add some printks in Xen (the hypercall name is
> > > > > > PHYSDEVOP_unmap_pirq) to figure out exactly why they are failing?
> > > > > >
> > > > > Did some test, domain_pirq_to_emuirq(d, unmap->pirq) = IRQ_UNBOUND in
> > > > > physdev_unmap_pirq.
> > > > >
> > > > That means that Linux didn't call irq_enable on the MSI-X in question:
> > > >
> > > > irq_enable -> __startup_pirq -> EVTCHNOP_bind_pirq
> > > >
> > > > EVTCHNOP_bind_pirq is implemented by evtchn_bind_pirq in Xen and calls
> > > > map_domain_emuirq_pirq, so domain_pirq_to_emuirq(d, unmap->pirq) should
> > > > be IRQ_PT.
> > > >
> > > > I don't know if that's a normal condition, but in any case it should
> > > > not create any problems to physdev_unmap_pirq, in fact the folloing
> > > > check:
> > > >
> > > > if ( domid == DOMID_SELF || ret )
> > > > goto free_domain;
> > > >
> > > > should fail so Xen should continue and execute unmap_domain_pirq. That's
> > > > what we want.
> > > >
> > > From linux side, request_irq-> request_threaded_irq-> __setup_irq->
> > > irq_startup-> startup_pirq-> EVTCHNOP_bind_pirq
> > > If irq_enable isn't called, how does the driver receive interrupt, I did
> > > see
> > > four interrupts in /proc/interrupt and driver works ok.
> > >
> >
> > Good to know
> >
> >
> > > Could you have a look if there is something wrong in xen side of clearing
> > > the
> > > mapping?
> > >
> >
> > What I am saying is that the error you are getting:
> >
> > pt_msix_disable: Unbind msix with pirq 67, gvec 0
> > pt_msix_disable: Unmap msix with pirq 67
> > pt_msix_disable: Error: Unmapping of MSI-X failed. [00:04.0]
> >
> > cannot be caused by domain_pirq_to_emuirq(d, pirq) returning
> > IRQ_UNBOUND.
> > So, why are you getting this error? What is failing?
> > I am ready to believe the problem is in Xen but Without understanding
> > why you are getting the error it's hard to find a solution.
> >
> I found the reason, you are looking at xen-unstable, I was working with
> 4.1.30-OVM, it has patch of CVE-2012-4536 / XSA-21.
> That patch set ret to -EINVAL initially. After remove that line, unmap
> succeed.
> But we still need below patch to let driver reload succeed everytime. Without
> that, 1st reload failed, 2nd succeed, 3 failed, ...
>
> diff -up --new-file ./hw/pt-msi.c.old1 ./hw/pt-msi.c
> --- ./hw/pt-msi.c.old1 2013-06-26 01:36:08.000000000 +0800
> +++ ./hw/pt-msi.c 2013-06-26 01:37:41.000000000 +0800
> @@ -469,7 +469,7 @@ static void pci_msix_writel(void *opaque
> return;
> }
>
> - if ( offset != 3 && entry->io_mem[offset] != val )
> + if ( offset != 3 && (entry->io_mem[offset] != val || entry->pirq == -1))
> entry->flags = 1;
> entry->io_mem[offset] = val;
Interesting. I don't think this is the proper fix though.
Does the appended patch change anything?
diff --git a/hw/pt-msi.c b/hw/pt-msi.c
index 71fa6f0..cd5d9c7 100644
--- a/hw/pt-msi.c
+++ b/hw/pt-msi.c
@@ -302,7 +302,7 @@ static int pt_msix_update_one(struct pt_dev *dev, int
entry_nr)
uint32_t gflags = __get_msi_gflags(entry->io_mem[2], gaddr);
int ret;
- if ( !entry->flags )
+ if ( !entry->flags && ptdev->msix->enabled )
return 0;
if (!gvec) {
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |