[Xen-devel] [PATCH 3/8] xen/arm: Use define instead of hardcoded value in debug-pl011

[Julien Grall <julien.grall@xxxxxxxxxx>]

Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
---
 xen/arch/arm/arm32/debug-pl011.inc |   18 ++++++++++--------
 xen/include/asm-arm/pl011-uart.h   |    1 +
 2 files changed, 11 insertions(+), 8 deletions(-)

diff --git a/xen/arch/arm/arm32/debug-pl011.inc 
b/xen/arch/arm/arm32/debug-pl011.inc
index 8b085b8..6a64dbf 100644
--- a/xen/arch/arm/arm32/debug-pl011.inc
+++ b/xen/arch/arm/arm32/debug-pl011.inc
@@ -16,19 +16,21 @@
  * GNU General Public License for more details.
  */
 
+#include <asm/pl011-uart.h>
+
 /* PL011 UART initialization
  * rb: register which contains the UART base address
  * rc: scratch register 1
  * rd: scratch register 2 (unused here) */
 .macro early_uart_init rb, rc, rd
         mov   \rc, #(7372800 / EARLY_PRINTK_BAUD % 16)
-        str   \rc, [\rb, #0x28]     /* -> UARTFBRD (Baud divisor fraction) */
+        str   \rc, [\rb, #FBRD]     /* -> UARTFBRD (Baud divisor fraction) */
         mov   \rc, #(7372800 / EARLY_PRINTK_BAUD / 16)
-        str   \rc, [\rb, #0x24]     /* -> UARTIBRD (Baud divisor integer) */
+        str   \rc, [\rb, #IBRD]     /* -> UARTIBRD (Baud divisor integer) */
         mov   \rc, #0x60            /* 8n1 */
-        str   \rc, [\rb, #0x2C]     /* -> UARTLCR_H (Line control) */
-        ldr   \rc, =0x00000301      /* RXE | TXE | UARTEN */
-        str   \rc, [\rb, #0x30]     /* -> UARTCR (Control Register) */
+        str   \rc, [\rb, #LCR_H]     /* -> UARTLCR_H (Line control) */
+        ldr   \rc, =(RXE | TXE | UARTEN)      /* RXE | TXE | UARTEN */
+        str   \rc, [\rb, #CR]     /* -> UARTCR (Control Register) */
 .endm
 
 /* PL011 UART wait UART to be ready to transmit
@@ -36,8 +38,8 @@
  * rc: scratch register */
 .macro early_uart_ready rb, rc
 1:
-        ldr   \rc, [\rb, #0x18]     /* <- UARTFR (Flag register) */
-        tst   \rc, #0x8             /* Check BUSY bit */
+        ldr   \rc, [\rb, #FR]       /* <- UARTFR (Flag register) */
+        tst   \rc, #BUSY             /* Check BUSY bit */
         bne   1b                    /* Wait for the UART to be ready */
 .endm
 
@@ -45,7 +47,7 @@
  * rb: register which contains the UART base address
  * rt: register which contains the character to transmit */
 .macro early_uart_transmit rb, rt
-        str   \rt, [\rb]            /* -> UARTDR (Data Register) */
+        str   \rt, [\rb, #DR]            /* -> UARTDR (Data Register) */
 .endm
 
 /*
diff --git a/xen/include/asm-arm/pl011-uart.h b/xen/include/asm-arm/pl011-uart.h
index 8c4edd4..3332c51 100644
--- a/xen/include/asm-arm/pl011-uart.h
+++ b/xen/include/asm-arm/pl011-uart.h
@@ -45,6 +45,7 @@
 /* FR bits */
 #define TXFE   (1<<7) /* TX FIFO empty */
 #define RXFE   (1<<4) /* RX FIFO empty */
+#define BUSY   (1<<3) /* Transmit is not complete */
 
 /* LCR_H bits */
 #define SPS    (1<<7) /* Stick parity select */
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel