|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] Is: Xen 4.2 and using 'xl' to save/restore is buggy with PVHVM Linux guests (v3.10 and v3.11 and presumarily earlier as well). Works with Xen 4.3 and Xen 4.4. Was:Re: FAILURE 3.11.0-rc7upstream(x86_64) 3.11.0-rc7upstream(i386)\: 2013-08-26 (tst001)
Hey,
I have a nighly build/test system that boots various machines with
upstream Linux and randomly selects Xen 4.1, Xen 4.2, Xen 4.3 and unstable.
After a bit of digging I found out that Xen 4.2 'xl' (but not 'xm')
has some badness in it. When "migrating" ('xl' save followed by 'xl' restore')
the PVHVM guests (and only PVHVM) end up dying. The best theory I came up
with is that they don't have the shared_info setup correctly as the guest
is not receiving any events.
This happens with both 32 and 64 bit guests. It happens also with
v3.10.
Here is a output from the of the guest using "console=hvc0" where you can
see it starting, and being saved and restored. And then dying as it
can't read anything:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.11.0-rc5upstream-00002-gfb96a1c
(build@xxxxxxxxxxxxxxxxxxxxxx) (gcc version 4.4.5 20101112 (Red Hat 4.4.5-2)
(GCC) ) #1 SMP Wed Aug 14 12:33:04 EDT 2013
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000003f7fffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000fc000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.4 present.
[ 0.000000] DMI: Xen HVM domU, BIOS 4.2.2-pre 08/13/2013
[ 0.000000] Hypervisor detected: Xen HVM
[ 0.000000] Xen version 4.2.
[ 0.000000] Xen Platform PCI: I/O protocol version 1
[ 0.000000] Netfront and the Xen platform PCI driver have been compiled for
this kernel: unplug emulated NICs.
[ 0.000000] Blkfront and the Xen platform PCI driver have been compiled for
this kernel: unplug emulated disks.
[ 0.000000] You might have to change the root device
[ 0.000000] from /dev/hd[a-d] to /dev/xvd[a-d]
[ 0.000000] in your root= kernel command line option
[ 0.000000] HVMOP_pagetable_dying not supported
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x3f800 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: write-back
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF write-combining
[ 0.000000] C0000-FFFFF write-back
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0F0000000 mask FF8000000 uncachable
[ 0.000000] 1 base 0F8000000 mask FFC000000 uncachable
[ 0.000000] 2 disabled
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] TOM2: 0000000240000000 aka 9216M
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000fbba0-0x000fbbaf] mapped at
[c00fbba0]
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01ffffff]
[ 0.000000] Base memory trampoline at [c009a000] 9a000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x37800000-0x379fffff]
[ 0.000000] [mem 0x37800000-0x379fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x34000000-0x377fffff]
[ 0.000000] [mem 0x34000000-0x377fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x33ffffff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x33ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x37a00000-0x37bfdfff]
[ 0.000000] [mem 0x37a00000-0x37bfdfff] page 4k
[ 0.000000] BRK [0x019b5000, 0x019b5fff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x3b06e000-0x3f7defff]
[ 0.000000] Allocated new RAMDISK: [mem 0x3348d000-0x37bfd798]
[ 0.000000] Move RAMDISK from [mem 0x3b06e000-0x3f7de798] to [mem
0x3348d000-0x37bfd798]
[ 0.000000] ACPI: RSDP 000ea020 00024 (v02 Xen)
[ 0.000000] ACPI: XSDT fc00f5a0 00054 (v01 Xen HVM 00000000 HVML
00000000)
[ 0.000000] ACPI: FACP fc00f260 000F4 (v04 Xen HVM 00000000 HVML
00000000)
[ 0.000000] ACPI: DSDT fc0035e0 0BBF6 (v02 Xen HVM 00000000 INTL
20090123)
[ 0.000000] ACPI: FACS fc0035a0 00040
[ 0.000000] ACPI: APIC fc00f360 000D8 (v02 Xen HVM 00000000 HVML
00000000)
[ 0.000000] ACPI: HPET fc00f4b0 00038 (v01 Xen HVM 00000000 HVML
00000000)
[ 0.000000] ACPI: WAET fc00f4f0 00028 (v01 Xen HVM 00000000 HVML
00000000)
[ 0.000000] ACPI: SSDT fc00f520 00031 (v02 Xen HVM 00000000 INTL
20090123)
[ 0.000000] ACPI: SSDT fc00f560 00031 (v02 Xen HVM 00000000 INTL
20090123)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 124MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] BRK [0x019b6000, 0x019b6fff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x37bfdfff]
[ 0.000000] HighMem [mem 0x37bfe000-0x3f7fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0x3f7fffff]
[ 0.000000] On node 0 totalpages: 259997
[ 0.000000] free_area_init_node: node 0, pgdat c17ad100, node_mem_map
f2c9d020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3997 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 224254 pages, LIFO batch:31
[ 0.000000] HighMem zone: 249 pages used for memmap
[ 0.000000] HighMem zone: 31746 pages, LIFO batch:7
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0xb008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x06] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x08] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x0a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x0c] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x0e] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x10] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x12] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x14] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x16] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x18] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x1a] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x1c] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-47
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 5 global_irq 5 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 10 global_irq 10 low level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 11 global_irq 11 low level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ5 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ10 used by override.
[ 0.000000] ACPI: IRQ11 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: 15 Processors exceeds NR_CPUS limit of 8
[ 0.000000] smpboot: Allowing 8 CPUs, 6 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 64
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.000000] e820: [mem 0x3f800000-0xfbffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on Xen HVM
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:8
nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @f2c27000 s35264 r0 d22080 u57344
[ 0.000000] pcpu-alloc: s35264 r0 d22080 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 258213
[ 0.000000] Kernel command line: initrd=initramf.gz console=hvc0 test=net
nofb debug no_console_suspend BOOT_IMAGE=vmlinuz
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00037bfe:0003f800)
[ 0.000000] Memory: 947416K/1039988K available (5902K kernel code, 379K
rwdata, 1628K rodata, 924K init, 1000K bss, 92572K reserved, 126984K highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff14000 - 0xfffff000 ( 940 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc17bc000 - 0xc18a3000 ( 924 kB)
[ 0.000000] .data : 0xc15c3f25 - 0xc17bbe40 (2015 kB)
[ 0.000000] .text : 0xc1000000 - 0xc15c3f25 (5903 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor
mode...Ok.
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:2304 nr_irqs:1152 16
[ 0.000000] xen:events: Xen HVM callback vector for event delivery is enabled
[ 0.000000] CPU 0 irqstacks, hard=f2408000 soft=f240a000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [hvc0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Detected 1600.049 MHz processor
[ 0.000000] tsc: Marking TSC unstable due to TSCs unsynchronized
[ 0.002000] Calibrating delay loop (skipped), value calculated using timer
frequency.. 3200.09 BogoMIPS (lpj=1600049)
[ 0.002000] pid_max: default: 32768 minimum: 301
[ 0.002000] Security Framework initialized
[ 0.002000] SELinux: Initializing.
[ 0.002000] SELinux: Starting in permissive mode
[ 0.002181] Mount-cache hash table entries: 512
[ 0.004645] Initializing cgroup subsys freezer
[ 0.005079] CPU: Physical Processor ID: 0
[ 0.005100] CPU: Processor Core ID: 0
[ 0.005131] mce: CPU supports 2 MCE banks
[ 0.005224] Last level iTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.005224] Last level dTLB entries: 4KB 512, 2MB 8, 4MB 4
[ 0.005224] tlb_flushall_shift: 5
[ 0.006350] Freeing SMP alternatives memory: 24K (c18a3000 - c18a9000)
[ 0.019120] ACPI: Core revision 20130517
[ 0.167077] ACPI: All ACPI Tables successfully acquired
[ 0.167833] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.174558] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[ 0.184606] smpboot: CPU0: AMD E-350 Processor (fam: 14, model: 01,
stepping: 00)
[ 0.184684] Xen: using vcpuop timer interface
[ 0.184720] installing Xen timer for CPU 0
[ 0.185000] Performance Events: Broken PMU hardware detected, using software
events only.
[ 0.185000] Failed to access perfctr msr (MSR c0010004 is 0)
[ 0.185855] MCE: In-kernel MCE decoding enabled.
[ 0.186455] NMI watchdog: disabled (cpu0): hardware events not enabled
[ 0.186833] register_vcpu_info failed: err=-22
[ 0.186857] installing Xen timer for CPU 1
[ 0.187930] CPU 1 irqstacks, hard=f1c16000 soft=f1c18000
[ 0.187959] smpboot: Booting Node 0, Processors #1
[ 0.002000] Initializing CPU#1
[ 0.259695] Brought up 2 CPUs
[ 0.259743] smpboot: Total of 2 processors activated (6585.85 BogoMIPS)
[ 0.265260] kworker/u16:0 (19) used greatest stack depth: 7140 bytes left
[ 0.267587] RTC time: 18:02:24, date: 08/14/13
[ 0.268848] NET: Registered protocol family 16
[ 0.280353] ACPI: bus type PCI registered
[ 0.281442] dca service started, version 1.12.1
[ 0.282949] PCI : PCI BIOS area is rw and x. Use pci=nobios if you want it
NX.
[ 0.283364] PCI: PCI BIOS revision 2.10 entry at 0xfb600, last bus=0
[ 0.283400] PCI: Using configuration type 1 for base access
[ 0.283424] PCI: Using configuration type 1 for extended access
[ 0.287025] kworker/u16:0 (50) used greatest stack depth: 7092 bytes left
[ 0.287253] kworker/u16:0 (53) used greatest stack depth: 7056 bytes left
[ 0.298011] kworker/u16:0 (91) used greatest stack depth: 7032 bytes left
[ 0.308201] kworker/u16:0 (131) used greatest stack depth: 6980 bytes left
[ 0.311020] kworker/u16:0 (138) used greatest stack depth: 6752 bytes left
[ 0.344262] bio: create slab <bio-0> at 0
[ 0.346110] ACPI: Added _OSI(Module Device)
[ 0.346152] ACPI: Added _OSI(Processor Device)
[ 0.346188] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.346225] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.350075] ACPI: EC: Look up EC in DSDT
[ 0.456979] ACPI: Interpreter enabled
[ 0.457000] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S1_] (20130517/hwxface-571)
[ 0.457063] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State
[\_S2_] (20130517/hwxface-571)
[ 0.457204] ACPI: (supports S0 S3 S4 S5)
[ 0.457229] ACPI: Using IOAPIC for interrupt routing
[ 0.457695] PCI: Using host bridge windows from ACPI; if necessary, use
"pci=nocrs" and report a bug
[ 0.756056] ACPI: No dock devices found.
[ 1.363252] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 1.367762] PCI host bridge to bus 0000:00
[ 1.367762] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 1.367762] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 1.367762] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 1.367762] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 1.368039] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfbffffff]
[ 1.368829] pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
[ 1.384505] pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
[ 1.391512] pci 0000:00:01.1: [8086:7010] type 00 class 0x010180
[ 1.395023] pci 0000:00:01.1: reg 0x20: [io 0xc220-0xc22f]
[ 1.409642] pci 0000:00:01.2: [8086:7020] type 00 class 0x0c0300
[ 1.413208] pci 0000:00:01.2: reg 0x20: [io 0xc200-0xc21f]
[ 1.428379] pci 0000:00:01.3: [8086:7113] type 00 class 0x068000
[ 1.428732] * Found PM-Timer Bug on the chipset. Due to workarounds for a
bug,
[ 1.428732] * this clock source is slow. Consider trying other clock sources
[ 1.433378] pci 0000:00:01.3: quirk: [io 0xb000-0xb03f] claimed by PIIX4
ACPI
[ 1.447926] pci 0000:00:02.0: [1013:00b8] type 00 class 0x030000
[ 1.448805] pci 0000:00:02.0: reg 0x10: [mem 0xf0000000-0xf1ffffff pref]
[ 1.449591] pci 0000:00:02.0: reg 0x14: [mem 0xf3000000-0xf3000fff]
[ 1.455503] pci 0000:00:03.0: [5853:0001] type 00 class 0xff8000
[ 1.456849] pci 0000:00:03.0: reg 0x10: [io 0xc000-0xc0ff]
[ 1.457520] pci 0000:00:03.0: reg 0x14: [mem 0xf2000000-0xf2ffffff pref]
[ 1.476110] pci_bus 0000:00: on NUMA node 0
[ 1.476176] acpi PNP0A03:00: ACPI _OSC support notification failed,
disabling PCIe ASPM
[ 1.476216] acpi PNP0A03:00: Unable to request _OSC control (_OSC support
mask: 0x08)
[ 1.479856] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 10 11)
[ 1.482214] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *10 11)
[ 1.484421] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 10 *11)
[ 1.486575] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 10 11)
[ 1.682739] ACPI: Enabled 2 GPEs in block 00 to 0F
[ 1.683187] ACPI: \_SB_.PCI0: notify handler is installed
[ 1.683449] Found 1 acpi root devices
[ 1.684210] xen:balloon: Initialising balloon driver
[ 1.697159] xen_balloon: Initialising balloon driver
[ 1.699116] kworker/u16:0 (308) used greatest stack depth: 6696 bytes left
[ 1.699524] vgaarb: device added:
PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.700029] vgaarb: loaded
[ 1.700045] vgaarb: bridge control possible 0000:00:02.0
[ 1.701163] ACPI: bus type USB registered
[ 1.702123] usbcore: registered new interface driver usbfs
[ 1.702291] usbcore: registered new interface driver hub
[ 1.702291] usbcore: registered new device driver usb
[ 1.703240] pps_core: LinuxPPS API ver. 1 registered
[ 1.703240] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo
Giometti <giometti@xxxxxxxx>
[ 1.704163] PTP clock support registered
[ 1.705036] PCI: Using ACPI for IRQ routing
[ 1.705056] PCI: pci_cache_line_size set to 64 bytes
[ 1.706212] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 1.706267] e820: reserve RAM buffer [mem 0x3f800000-0x3fffffff]
[ 1.708226] NetLabel: Initializing
[ 1.708226] NetLabel: domain hash size = 128
[ 1.708243] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.708394] NetLabel: unlabeled traffic allowed by default
[ 1.709692] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 1.709742] hpet0: 3 comparators, 64-bit 62.500000 MHz counter
[ 1.712014] Switching to clocksource xen
[ 1.758040] pnp: PnP ACPI init
[ 1.758172] ACPI: bus type PNP registered
[ 1.758954] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[ 1.758996] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.760131] pnp 00:01: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.761198] system 00:02: [io 0x08a0-0x08a3] has been reserved
[ 1.761259] system 00:02: [io 0x0cc0-0x0ccf] has been reserved
[ 1.761312] system 00:02: [io 0x04d0-0x04d1] has been reserved
[ 1.761346] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.761542] pnp 00:03: [dma 4]
[ 1.762117] pnp 00:03: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.762355] xen: --> pirq=16 -> irq=8 (gsi=8)
[ 1.762845] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.763488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
[ 1.763812] xen: --> pirq=17 -> irq=12 (gsi=12)
[ 1.764334] pnp 00:06: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 1.764667] xen: --> pirq=18 -> irq=1 (gsi=1)
[ 1.765221] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 PNP030b
(active)
[ 1.765560] xen: --> pirq=19 -> irq=6 (gsi=6)
[ 1.765609] pnp 00:08: [dma 2]
[ 1.766112] pnp 00:08: Plug and Play ACPI device, IDs PNP0700 (active)
[ 1.766639] xen: --> pirq=20 -> irq=4 (gsi=4)
[ 1.767164] kworker/u16:0 (344) used greatest stack depth: 6608 bytes left
[ 1.767180] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
[ 1.767967] xen: --> pirq=21 -> irq=7 (gsi=7)
[ 1.768484] pnp 00:0a: Plug and Play ACPI device, IDs PNP0400 (active)
[ 1.769254] system 00:0b: [io 0x10c0-0x1141] has been reserved
[ 1.769310] system 00:0b: [io 0xb044-0xb047] has been reserved
[ 1.769343] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.956014] pnp: PnP ACPI: found 12 devices
[ 1.956049] ACPI: bus type PNP unregistered
[ 1.963146] kworker/u16:0 (361) used greatest stack depth: 6576 bytes left
[ 2.027598] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 2.027638] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 2.027666] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 2.027698] pci_bus 0000:00: resource 7 [mem 0xf0000000-0xfbffffff]
[ 2.028270] NET: Registered protocol family 2
[ 2.029974] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.030100] TCP bind hash table entries: 8192 (order: 4, 65536 bytes)
[ 2.030167] TCP: Hash tables configured (established 8192 bind 8192)
[ 2.030288] TCP: reno registered
[ 2.030325] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 2.030373] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 2.031705] NET: Registered protocol family 1
[ 2.032812] RPC: Registered named UNIX socket transport module.
[ 2.032853] RPC: Registered udp transport module.
[ 2.032877] RPC: Registered tcp transport module.
[ 2.032916] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.032956] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 2.033375] pci 0000:00:01.0: PIIX3: Enabling Passive Release
[ 2.033799] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 2.042123] xen: --> pirq=22 -> irq=23 (gsi=23)
[ 2.042619] pci 0000:00:01.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 2.042653] pci 0000:00:01.2: Performing full reset
[ 2.050820] pci 0000:00:02.0: Boot video device
[ 2.051283] PCI: CLS 0 bytes, default 64
[ 2.051729] Unpacking initramfs...
[ 6.404043] Freeing initrd memory: 73156K (f348d000 - f7bfe000)
[ 6.405007] Machine check injector initialized
[ 6.408638] microcode: CPU0: patch_level=0x05000028
[ 6.408850] microcode: CPU1: patch_level=0x05000028
[ 6.409391] microcode: Microcode Update Driver: v2.00
<tigran@xxxxxxxxxxxxxxxxxxxx>, Peter Oruba
[ 6.409442] Scanning for low memory corruption every 60 seconds
[ 6.412367] audit: initializing netlink socket (disabled)
[ 6.412488] type=2000 audit(1376503350.769:1): initialized
[ 6.445265] bounce pool size: 64 pages
[ 6.445423] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 6.447509] VFS: Disk quotas dquot_6.5.2
[ 6.448170] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 6.450839] NFS: Registering the id_resolver key type
[ 6.450925] Key type id_resolver registered
[ 6.450946] Key type id_legacy registered
[ 6.451010] NTFS driver 2.1.30 [Flags: R/W].
[ 6.455319] msgmni has been set to 1745
[ 6.455936] SELinux: Registering netfilter hooks
[ 6.460211] Block layer SCSI generic (bsg) driver version 0.4 loaded (major
251)
[ 6.460258] io scheduler noop registered
[ 6.460278] io scheduler deadline registered
[ 6.460436] io scheduler cfq registered (default)
[ 6.461673] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 6.462954] cirrusfb 0000:00:02.0: Cirrus Logic chipset on PCI bus, RAM
(4096 kB) at 0xf0000000
[ 6.465354] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
[ 6.465413] ACPI: Power Button [PWRF]
[ 6.466221] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
[ 6.466273] ACPI: Sleep Button [SLPF]
[ 6.469172] kworker/u16:1 (484) used greatest stack depth: 6456 bytes left
[ 6.469254] GHES: HEST is not enabled!
[ 6.469278] ioatdma: Intel(R) QuickData Technology Driver 4.00
[ 6.481100] xen: --> pirq=23 -> irq=28 (gsi=28)
[ 6.481175] xen:grant_table: Grant tables using version 1 layout
[ 6.481303] Grant table initialized
[ 6.483199] kworker/u16:0 (495) used greatest stack depth: 6444 bytes left
[ 6.688912] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 6.733389] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 6.741991] Non-volatile memory driver v1.3
[ 6.742504] Linux agpgart interface v0.103
[ 6.746515] [drm] Initialized drm 1.1.0 20060810
[ 6.760449] loop: module loaded
[ 6.762080] libphy: Fixed MDIO Bus: probed
[ 6.762107] tun: Universal TUN/TAP device driver, 1.6
[ 6.762132] tun: (C) 1999-2004 Max Krasnyansky <maxk@xxxxxxxxxxxx>
[ 6.762902] ixgbevf: Intel(R) 10 Gigabit PCI Express Virtual Function
Network Driver - version 2.7.12-k
[ 6.762950] ixgbevf: Copyright (c) 2009 - 2012 Intel Corporation.
[ 6.765467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 6.765507] ehci_hcd: block sizes: qh 68 qtd 96 itd 160 sitd 96
[ 6.765562] ehci-pci: EHCI PCI platform driver
[ 6.765895] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 6.765931] ohci_hcd: block sizes: ed 64 td 64
[ 6.765978] ohci-pci: OHCI PCI platform driver
[ 6.766337] uhci_hcd: USB Universal Host Controller Interface driver
[ 6.775873] uhci_hcd 0000:00:01.2: setting latency timer to 64
[ 6.776269] uhci_hcd 0000:00:01.2: UHCI Host Controller
[ 6.777250] uhci_hcd 0000:00:01.2: new USB bus registered, assigned bus
number 1
[ 6.777645] uhci_hcd 0000:00:01.2: detected 2 ports
[ 6.778013] uhci_hcd 0000:00:01.2: uhci_check_and_reset_hc: cmd = 0x0000
[ 6.778047] uhci_hcd 0000:00:01.2: Performing full reset
[ 6.778834] uhci_hcd 0000:00:01.2: irq 23, io base 0x0000c200
[ 6.781189] usb usb1: default language 0x0409
[ 6.781360] usb usb1: udev 1, busnum 1, minor = 0
[ 6.781387] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001
[ 6.781418] usb usb1: New USB device strings: Mfr=3, Product=2,
SerialNumber=1
[ 6.781453] usb usb1: Product: UHCI Host Controller
[ 6.781478] usb usb1: Manufacturer: Linux 3.11.0-rc5upstream-00002-gfb96a1c
uhci_hcd
[ 6.781513] usb usb1: SerialNumber: 0000:00:01.2
[ 6.782573] usb usb1: usb_probe_device
[ 6.782599] usb usb1: configuration #1 chosen from 1 choice
[ 6.782700] usb usb1: adding 1-0:1.0 (config #1, interface 0)
[ 6.783484] hub 1-0:1.0: usb_probe_interface
[ 6.783520] hub 1-0:1.0: usb_probe_interface - got id
[ 6.783547] hub 1-0:1.0: USB hub found
[ 6.783676] hub 1-0:1.0: 2 ports detected
[ 6.783715] hub 1-0:1.0: standalone hub
[ 6.783736] hub 1-0:1.0: no power switching (usb 1.0)
[ 6.783760] hub 1-0:1.0: individual port over-current protection
[ 6.783790] hub 1-0:1.0: power on to power good time: 2ms
[ 6.783900] hub 1-0:1.0: local power source is good
[ 6.784341] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 6.786258] usbcore: registered new interface driver usblp
[ 6.787160] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 6.793429] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 6.793492] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 6.794547] mousedev: PS/2 mouse device common for all mice
[ 6.799609] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 6.799867] rtc_cmos 00:04: alarms up to one day, 114 bytes nvram, hpet irqs
[ 6.800435] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input2
[ 6.801490] cpuidle: using governor ladder
[ 6.801519] cpuidle: using governor menu
[ 6.803617] zram: Created 1 device(s) ...
[ 6.805169] Netfilter messages via NETLINK v0.30.
[ 6.805287] nf_conntrack version 0.5.0 (15946 buckets, 63784 max)
[ 6.806193] ctnetlink v0.93: registering with nfnetlink.
[ 6.890581] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 6.890923] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 6.891564] TCP: cubic registered
[ 6.891590] Initializing XFRM netlink socket
[ 6.892283] NET: Registered protocol family 10
[ 6.894370] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 6.895377] sit: IPv6 over IPv4 tunneling driver
[ 6.898258] NET: Registered protocol family 17
[ 6.898864] Key type dns_resolver registered
[ 6.901392] Using IPI No-Shortcut mode
[ 6.902947] PM: Hibernation image not present or could not be loaded.
[ 6.903142] registered taskstats version 1
[ 6.903956] kmemleak: Kernel memory leak detector initialized
[ 6.905329] kmemleak: Automatic memory scanning thread started
[ 6.905920] xenbus_probe_frontend: Device with no driver: device/vbd/5632
[ 6.905957] xenbus_probe_frontend: Device with no driver: device/vbd/51712
[ 6.905987] xenbus_probe_frontend: Device with no driver: device/vkbd/-1
[ 6.906018] xenbus_probe_frontend: Device with no driver: device/vif/0
[ 6.906494] Magic number: 9:933:38
[ 6.906536] bdi 7:3: hash matches
[ 6.906698] pnp 00:0a: hash matches
[ 6.909343] Freeing unused kernel memory: 924K (c17bc000 - c18a3000)
[ 6.909643] Write protecting the kernel text: 5904k
[ 6.909788] Write protecting the kernel read-only data: 1636k
[ 6.909822] NX-protecting the kernel data: 4336k
init started: BusyBox v1.14.3 (2013-08-14 12:37:40 EDT)
Mounting directories [ OK ]
[ 6.946645] mv (1125) used greatest stack depth: 6388 bytes left
[ 6.968662] rm (1130) used greatest stack depth: 6356 bytes left
[ 6.973867] mv (1131) used greatest stack depth: 6236 bytes left
[ 7.229237] mv (1135) used greatest stack depth: 6120 bytes left
mount: mount point /proc/bus/usb does not exist
mount: mount point /sys/kernel/config does not exist
[ 7.332636] input: Xen Virtual Keyboard as /devices/virtual/input/input3
[ 7.334407] input: Xen Virtual Pointer as /devices/virtual/input/input4
[ 7.444693] modprobe (1161) used greatest stack depth: 5936 bytes left
[ 7.481304] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input5
FATAL: Error inserting xen_fbfront
(/lib/modules/3.11.0-rc5upstream-00002-gfb96a1c/kernel/drivers/video/xen-fbfront.ko):
No such device
[ 7.491965] xen_netfront: Initialising Xen virtual ethernet driver
[ 7.612985] vbd vbd-5632: 19 xenbus_dev_probe on device/vbd/5632
[ 7.614400] vbd vbd-5632: failed to write error node for device/vbd/5632 (19
xenbus_dev_probe on device/vbd/5632)
[ 7.677895] blkfront: xvda: barrier or flush: disabled; persistent grants:
enabled; indirect descriptors: enabled;
[ 7.685935] xvda: unknown partition table
[ 7.789744] udevd (1192): /proc/1192/oom_adj is deprecated, please use
/proc/1192/oom_score_adj instead.
[ 7.955072] usb usb1: suspend_rh (auto-stop)
[ 8.021481] SCSI subsystem initialized
[ 8.032027] ACPI: bus type ATA registered
udevd-work[1243]: error opening ATTR{/sys/devices/system/cpu/cpu0/online} for
writing: No such file or directory
[ 8.044392] libata version 3.00 loaded.
[ 8.049999] ata_piix 0000:00:01.1: version 2.13
[ 8.052225] ata_piix 0000:00:01.1: setting latency timer to 64
[ 8.115995] scsi0 : ata_piix
[ 8.137449] scsi1 : ata_piix
[ 8.146548] ata1: PATA max MWDMA2 cmd 0x1f0 ctl 0x3f6 bmdma 0xc220 irq 14
[ 8.146926] ata2: PATA max MWDMA2 cmd 0x170 ctl 0x376 bmdma 0xc228 irq 15
[ 8.315848] ata2.01: NODEV after polling detection
[ 8.323840] ata2.00: ATAPI: QEMU DVD-ROM, 0.10.2, max UDMA/100
[ 8.333767] ata2.00: configured for MWDMA2
[ 8.343317] scsi 1:0:0:0: CD-ROM QEMU QEMU DVD-ROM 0.10
PQ: 0 ANSI: 5
[ 8.360407] modprobe (1358) used greatest stack depth: 5752 bytes left
[ 8.497931] sr0: scsi3-mmc drive: 4x/4x xa/form2 tray
[ 8.497975] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 8.506930] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 8.569470] sr 1:0:0:0: Attached scsi generic sg0 type 5
Waiting for devices [ OK ]
[ 8.598419] ip (2108) used greatest stack depth: 5004 bytes left
Waiting for fb [ OK ]
Waiting for network [ OK ]
Bringing up loopback interface: [ OK ]
Bringing up interface eth0:
Determining IP information for eth0... done.
[ OK ]
Waiting for init.custom [ OK ]
Starting SSHd ...
SSH started [2396]
Waiting for SSHd [ OK ]
WARNING: ssh currently running [2396] ignoring start request
[ 12.190406] Loading iSCSI transport class v2.0-870.
[ 12.206676] iscsi: registered transport (tcp)
Could not read fw values.
Aug 14 18:02:36 g-pvops syslogd 1.5.0: restart.
Running in HVM context on Xen v4.2.
[1:0:0:0] cd/dvd QEMU QEMU DVD-ROM 0.10 /dev/sr0
00:00.0 Host bridge: Intel Corporation 440FX - 82441FX PMC [Natoma] (rev 02)
00:01.0 ISA bridge: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II]
00:01.1 IDE interface: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II]
00:01.2 USB Controller: Intel Corporation 82371SB PIIX3 USB [Natoma/Triton II]
(rev 01)
00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
00:02.0 VGA compatible controller: Cirrus Logic GD 5446
00:03.0 Class ff80: XenSource, Inc. Xen Platform Device (rev 01)
CPU0 CPU1
0: 184 0 IO-APIC-edge timer
1: 9 0 xen-pirq-ioapic-edge i8042
8: 35 0 xen-pirq-ioapic-edge rtc0
9: 0 0 IO-APIC-fasteoi acpi
12: 125 0 xen-pirq-ioapic-edge i8042
14: 0 0 IO-APIC-edge ata_piix
15: 36 35 IO-APIC-edge ata_piix
23: 0 0 xen-pirq-ioapic-level uhci_hcd:usb1
64: 7869 0 xen-percpu-virq timer0
65: 3420 0 xen-percpu-ipi resched0
66: 0 0 xen-percpu-ipi callfunc0
67: 0 0 xen-percpu-virq debug0
68: 389 0 xen-percpu-ipi callfuncsingle0
69: 0 8640 xen-percpu-virq timer1
70: 0 3003 xen-percpu-ipi resched1
71: 0 0 xen-percpu-ipi callfunc1
72: 0 0 xen-percpu-virq debug1
73: 0 415 xen-percpu-ipi callfuncsingle1
74: 304 0 xen-dyn-event xenbus
75: 83 0 xen-dyn-event hvc_console
76: 0 0 xen-dyn-event vkbd
77: 11 0 xen-dyn-event eth0-tx
78: 9 0 xen-dyn-event eth0-rx
79: 2 0 xen-dyn-event blkif
NMI: 0 0 Non-maskable interrupts
LOC: 0 0 Local timer interrupts
SPU: 0 0 Spurious interrupts
PMI: 0 0 Performance monitoring interrupts
IWI: 730 1227 IRQ work interrupts
RTR: 0 0 APIC ICR read retries
RES: 3420 3003 Rescheduling interrupts
CAL: 148 150 Function call interrupts
TLB: 241 265 TLB shootdowns
TRM: 0 0 Thermal event interrupts
THR: 0 0 Threshold APIC interrupts
MCE: 0 0 Machine check exceptions
MCP: 1 1 Machine check polls
ERR: 0
MIS: 0
00000000-00000fff : reserved
00001000-0009dfff : System RAM
0009e000-0009ffff : reserved
000a0000-000bffff : PCI Bus 0000:00
000a0000-000bffff : Video RAM area
000c0000-000c8bff : Video ROM
000c9000-000c99ff : Adapter ROM
000e0000-000fffff : reserved
000f0000-000fffff : System ROM
00100000-3f7fffff : System RAM
01000000-015c3f24 : Kernel code
015c3f25-017bbe3f : Kernel data
018a9000-019a2fff : Kernel bss
3f800000-3fffffff : RAM buffer
f0000000-fbffffff : PCI Bus 0000:00
f0000000-f1ffffff : 0000:00:02.0
f0000000-f1ffffff : cirrusfb
f2000000-f2ffffff : 0000:00:03.0
f2000000-f2ffffff : xen-platform-pci
f3000000-f3000fff : 0000:00:02.0
f3000000-f3000fff : cirrusfb
fc000000-ffffffff : reserved
fec00000-fec003ff : IOAPIC 0
fed00000-fed003ff : HPET 0
fee00000-fee00fff : Local APIC
MemTotal: 1021520 kB
MemFree: 758732 kB
Buffers: 0 kB
Cached: 221984 kB
SwapCached: 0 kB
Active: 19980 kB
Inactive: 92124 kB
Active(anon): 5416 kB
Inactive(anon): 61396 kB
Active(file): 14564 kB
Inactive(file): 30728 kB
Unevictable: 112992 kB
Mlocked: 2628 kB
HighTotal: 126984 kB
HighFree: 0 kB
LowTotal: 894536 kB
LowFree: 758732 kB
SwapTotal: 0 kB
SwapFree: 0 kB
Dirty: 0 kB
Writeback: 0 kB
AnonPages: 2984 kB
Mapped: 3388 kB
Shmem: 64584 kB
Slab: 29152 kB
SReclaimable: 7872 kB
SUnreclaim: 21280 kB
KernelStack: 504 kB
PageTables: 196 kB
NFS_Unstable: 0 kB
Bounce: 0 kB
WritebackTmp: 0 kB
CommitLimit: 510760 kB
Committed_AS: 70924 kB
VmallocTotal: 122880 kB
VmallocUsed: 5340 kB
VmallocChunk: 117152 kB
AnonHugePages: 0 kB
HugePages_Total: 0
HugePages_Free: 0
HugePages_Rsvd: 0
HugePages_Surp: 0
Hugepagesize: 2048 kB
DirectMap4k: 49144 kB
DirectMap2M: 864256 kB
Waiting for init.late [ OK ]
[ 12.489749] device-mapper: ioctl: 4.25.0-ioctl (2013-06-26) initialised:
dm-devel@xxxxxxxxxx
[ 12.494289] device-mapper: multipath: version 1.5.1 loaded
PING storage.dumpdata.com (192.168.103.1) 56(84) bytes of data.
--- storage.dumpdata.com ping statistics ---
1 packets transmitted, 1 received, 0% packet loss, time 1ms
rtt min/avg/max/mdev = 0.539/0.539/0.539/0.000 ms
[ 12.596484] mount.nfs (2490) used greatest stack depth: 4852 bytes left
mount.nfs: access denied by server while mounting storage:/srv/results
192.168.103.1:3260,1
iqn.2003-01.org.linux-iscsi.target:sn.592b414748aa7a6530ce8785b46fc44f
Logging in to [iface: default, target:
iqn.2003-01.org.linux-iscsi.target:sn.592b414748aa7a6530ce8785b46fc44f, portal:
192.168.103.1,3260]
[ 12.911635] scsi2 : iSCSI Initiator over TCP/IP
[ 13.200010] scsi 2:0:0:0: Direct-Access LIO-ORG IBLOCK 4.0
PQ: 0 ANSI: 5
[ 13.208997] scsi 2:0:0:0: Attached scsi generic sg1 type 0
Login to [iface: default, target:
iqn.2003-01.org.linux-iscsi.target:sn.592b414748aa7a6530ce8785b46fc44f, portal:
192.168.103.1,3260]: successful
[ 13.222679] sd 2:0:0:0: [sda] 1953382400 512-byte logical blocks: (1.00
TB/931 GiB)
[ 13.225757] sd 2:0:0:0: [sda] Write Protect is off
[ 13.225798] sd 2:0:0:0: [sda] Mode Sense: 2f 00 00 00
[ 13.227715] sd 2:0:0:0: [sda] Write cache: disabled, read cache: enabled,
doesn't support DPO or FUA
[ 13.240486] sda: unknown partition table
Aug 14 18:02:37 g-pvops iscsid: connection1:0 is operational now
[ 13.249212] sd 2:0:0:0: [sda] Attached SCSI disk
PV /dev/xvda VG vg_i386-pvhvm lvm2 [4.00 GiB / 68.00 MiB free]
PV /dev/sda VG guests lvm2 [931.44 GiB / 161.44 GiB free]
Total: 2 [935.44 GiB] / in use: 2 [935.44 GiB] / in no VG: 0 [0 ]
[ 18.398590] bio: create slab <bio-1> at 1
2 logical volume(s) in volume group "vg_i386-pvhvm" now active
25 logical volume(s) in volume group "guests" now active
libxl: error: libxl.c:87:libxl_ctx_alloc: Is xenstore daemon running?
failed to stat /var/run/xenstored.pid: No such file or directory
cannot init xl context
[ 19.055455] smpboot: CPU 1 is now offline
[ 19.061401] installing Xen timer for CPU 1
[ 19.067643] smpboot: Booting Node 0 Processor 1 APIC 0x2
[ 19.056240] Initializing CPU#1
10,11c10,11
< 64: 9128 0 xen-percpu-virq timer0
< 65: 3825 0 xen-percpu-ipi resched0
---
> 64: 9164 0 xen-percpu-virq timer0
> 65: 3833 0 xen-percpu-ipi resched0
15,16c15,16
< 69: 0 9644 xen-percpu-virq timer1
< 70: 0 3369 xen-percpu-ipi resched1
---
> 69: 0 8 xen-percpu-virq timer1
> 70: 0 9 xen-percpu-ipi resched1
19c19
< 73: 0 457 xen-percpu-ipi callfuncsingle1
---
> 73: 0 3 xen-percpu-ipi callfuncsingle1
21c21
< 75: 116 0 xen-dyn-event hvc_console
---
> 75: 120 0 xen-dyn-event hvc_console
23c23
< 77: 214 0 xen-dyn-event eth0-tx
---
> 77: 216 0 xen-dyn-event eth0-tx
32,33c32,33
< RES: 3825 3369 Rescheduling interrupts
< CAL: 169 165 Function call interrupts
---
> RES: 3833 3383 Rescheduling interrupts
> CAL: 169 174 Function call interrupts
38c38
< MCP: 1 1 Machine check polls
---
> MCP: 1 2 Machine check polls
Starting net testcase..
Starting netserver at port 12865
Starting netserver at hostname 0.0.0.0 port 12865 and family AF_UNSPEC
Aug 14 18:02:43 g-pvops init: starting pid 2697, tty '/dev/tty1': '/bin/sh'
Running Iperf Server as a daemon
The Iperf daemon process ID : 2698
Aug 14 18:02:45 g-pvops init: reloading /etc/inittab
Aug 14 18:02:45 g-pvops init: starting pid 2702, tty '/dev/ttyS0': '/bin/sh'
[ 21.835836] hub 1-0:1.0: hub_suspend
[ 21.835882] usb usb1: bus suspend, wakeup 0
[ 21.835906] usb usb1: suspend_rh
[ 21.839453] PM: freeze of devices complete after 5.512 msecs
[ 21.839491] suspending xenstore...
[ 21.839778] PM: late freeze of devices complete after 0.263 msecs
[ 21.850431] PM: noirq freeze of devices complete after 10.609 msecs
[ 21.851111] xen:events: Xen HVM callback vector for event delivery is enabled
[ 21.851111] Xen Platform PCI: I/O protocol version 1
[ 21.851111] xen:grant_table: Grant tables using version 1 layout
[ 21.851111] xen: --> irq=8, pirq=16
[ 21.851111] xen: --> irq=12, pirq=17
[ 21.851111] xen: --> irq=1, pirq=18
[ 21.851111] xen: --> irq=6, pirq=19
[ 21.851111] xen: --> irq=4, pirq=20
[ 21.851111] xen: --> irq=7, pirq=21
[ 21.851111] xen: --> irq=23, pirq=22
[ 21.851111] xen: --> irq=28, pirq=23
[ 21.851111] BUG: sleeping function called from invalid context at
/home/build/linux-konrad/kernel/mutex.c:96
[ 21.851111] in_atomic(): 1, irqs_disabled(): 1, pid: 7, name: migration/0
[ 21.851111] CPU: 0 PID: 7 Comm: migration/0 Not tainted
3.11.0-rc5upstream-00002-gfb96a1c #1
[ 21.851111] Hardware name: Xen HVM domU, BIOS 4.2.2-pre 08/13/2013
[ 21.851111] c16bb050 f27b7e04 c15b78f0 00000007 f27b7e28 c10afb9d c16bb5e4
00000001
[ 21.851111] 00000001 00000007 f279ed70 c179163c 00000006 f27b7e38 c15b7fe0
0000004b
[ 21.851111] 00000006 f27b7e4c c134c0a3 00000002 f1c4bebc f1c4bed0 f27b7e54
c1378c5b
[ 21.851111] Call Trace:
[ 21.851111] [<c15b78f0>] dump_stack+0x4c/0x68
[ 21.851111] [<c10afb9d>] __might_sleep+0xdd/0x110
[ 21.851111] [<c15b7fe0>] mutex_lock+0x20/0x40
[ 21.851111] [<c134c0a3>] rebind_evtchn_irq+0x33/0xa0
[ 21.851111] [<c1378c5b>] xen_console_resume+0x4b/0x50
[ 21.851111] [<c134e492>] xen_suspend+0x92/0xc0
[ 21.851111] [<c10ef5fb>] stop_machine_cpu_stop+0x8b/0xc0
[ 21.851111] [<c10ef30c>] cpu_stopper_thread+0x8c/0x140
[ 21.851111] [<c10ef570>] ? stop_one_cpu_nowait+0x30/0x30
[ 21.851111] [<c108b611>] ? irq_exit+0x61/0xb0
[ 21.851111] [<c134ba50>] ? xen_evtchn_do_upcall+0x20/0x30
[ 21.851111] [<c15c3039>] ? xen_hvm_callback_vector+0x2d/0x32
[ 21.851111] [<c1077868>] ? default_spin_lock_flags+0x8/0x10
[ 21.851111] [<c15bb695>] ? _raw_spin_lock_irqsave+0x35/0x50
[ 21.851111] [<c10acec3>] smpboot_thread_fn+0x133/0x1b0
[ 21.851111] [<c10a4c6c>] kthread+0x9c/0xa0
[ 21.851111] [<c10acd90>] ? smpboot_create_threads+0x60/0x60
[ 21.851111] [<c10b0303>] ? __schedule_bug+0x13/0x60
[ 21.851111] [<c15c29f7>] ret_from_kernel_thread+0x1b/0x28
[ 21.851111] [<c10a4bd0>] ? kthread_freezable_should_stop+0x60/0x60
[ 21.851111] CE: xen increased min_delta_ns to 150000 nsec
[ 21.851111] CE: xen increased min_delta_ns to 225000 nsec
[ 21.851111] CE: xen increased min_delta_ns to 337500 nsec
[ 21.851111] CE: xen increased min_delta_ns to 506250 nsec
[ 21.851111] CE: xen increased min_delta_ns to 759375 nsec
[ 21.851111] CE: xen increased min_delta_ns to 1000000 nsec
[ 21.851111] CE: Reprogramming failure. Giving up
[ 21.851111] CE: Reprogramming failure. Giving up
[ 21.851641] PM: noirq restore of devices complete after 150.287 msecs
[ 21.851641] PM: early restore of devices complete after 0.124 msecs
[ 22.081799] CE: Reprogramming failure. Giving up
[ 22.081836] hrtimer: interrupt took 58582 ns
[ 22.100103] uhci_hcd 0000:00:01.2: uhci_pci_resume
[ 22.101103] usb usb1: root hub lost power or was reset
[ 22.117081] usb usb1: usb resume
[ 22.117118] usb usb1: wakeup_rh
[ 22.121343] hub 1-0:1.0: hub_reset_resume
[ 22.121383] hub 1-0:1.0: trying to enable port power on non-switchable hub
[ 22.225009] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0000
[ 22.337981] ata2.01: NODEV after polling detection
[ 22.337981] ata2.00: configured for MWDMA2
[ 23.204988] usb usb1: suspend_rh (auto-stop)
[ 43.192133] INFO: rcu_sched detected stalls on CPUs/tasks: { 0} (detected by
1, t=21002 jiffies, g=2639, c=2638, q=1847)
[ 43.192279] sending NMI to all CPUs:
[ 43.192405] NMI backtrace for cpu 1
[ 43.192454] CPU: 1 PID: 0 Comm: swapper/1 Not tainted
3.11.0-rc5upstream-00002-gfb96a1c #1
[ 43.192524] Hardware name: Xen HVM domU, BIOS 4.2.2-pre 08/13/2013
[ 43.192584] task: f27bd550 ti: f27dc000 task.ti: f27dc000
[ 43.192638] EIP: 0060:[<c106e1d4>] EFLAGS: 00200046 CPU: 1
[ 43.192698] EIP is at default_send_IPI_mask_logical+0x74/0xb0
[ 43.192756] EAX: 00000c00 EBX: 03000000 ECX: c1776b20 EDX: fffff000
[ 43.192815] ESI: 00000002 EDI: 00200006 EBP: f27ddce0 ESP: f27ddcd0
[ 43.192873] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 43.192942] CR0: 8005003b CR2: 00000000 CR3: 37718000 CR4: 000006f0
[ 43.193004] Stack:
[ 43.193032] 00000800 00000000 c177d640 00000737 f27ddcec c106e008 00000000
f27ddcfc
[ 43.193098] c106e604 c16aeb08 f2c38940 f27ddd44 c110adbc c16c01bc 00000001
0000520a
[ 43.193098] 00000a4f 00000a4e 00000737 00200086 f2c38940 00200086 c17b4740
00000001
[ 43.193098] Call Trace:
[ 43.193098] [<c106e008>] default_send_IPI_all+0x68/0x70
[ 43.193098] [<c106e604>] arch_trigger_all_cpu_backtrace+0x44/0x70
[ 43.193098] [<c110adbc>] rcu_check_callbacks+0x57c/0x5c0
[ 43.193098] [<c1092028>] update_process_times+0x38/0x70
[ 43.193098] [<c10d7a1c>] tick_sched_handle+0x2c/0x70
[ 43.193098] [<c10d7ce5>] tick_sched_timer+0x45/0x90
[ 43.193098] [<c10a8725>] __run_hrtimer+0x75/0x1e0
[ 43.193098] [<c10d7ca0>] ? tick_nohz_handler+0xc0/0xc0
[ 43.193098] [<c10a8ba8>] hrtimer_interrupt+0x158/0x310
[ 43.193098] [<c10399f4>] xen_timer_interrupt+0x24/0x1f0
[ 43.193098] [<c1047df8>] ? sched_clock+0x8/0x10
[ 43.193098] [<c10b5462>] ? sched_clock_local+0xb2/0x190
[ 43.193098] [<c1077a77>] ? pvclock_clocksource_read+0xd7/0x170
[ 43.193098] [<c1039d75>] ? xen_clocksource_read+0x25/0x40
[ 43.193098] [<c1103dd4>] handle_irq_event_percpu+0x54/0x200
[ 43.193098] [<c1106438>] ? irq_get_irq_data+0x8/0x10
[ 43.193098] [<c134b188>] ? info_for_irq+0x8/0x20
[ 43.193098] [<c1106724>] handle_percpu_irq+0x34/0x50
[ 43.193098] [<c134ba0d>] __xen_evtchn_do_upcall+0x2cd/0x2e0
[ 43.193098] [<c10d7f54>] ? tick_check_idle+0xb4/0xc0
[ 43.193098] [<c134ba4b>] xen_evtchn_do_upcall+0x1b/0x30
[ 43.193098] [<c15c3039>] xen_hvm_callback_vector+0x2d/0x32
[ 43.193098] [<c1076cf5>] ? native_safe_halt+0x5/0x10
[ 43.193098] [<c1049ce7>] default_idle+0x17/0xd0
[ 43.193098] [<c10497e6>] arch_cpu_idle+0x26/0x30
[ 43.193098] [<c10cdbfd>] cpu_startup_entry+0x4d/0x1f0
[ 43.193098] [<c106bc18>] start_secondary+0x188/0x1f0
[ 43.193098] Code: 00 b3 ff ff 80 e5 10 75 ee c1 e3 18 89 98 10 b3 ff ff 89
f0 09 d0 80 ce 04 83 fe 02 0f 44 c2 8b 15 c8 74 77 c1 89 82 00 b3 ff ff <89> f8
50 9d 8d 74 26 00 83 c4 04 5b 5e 5f 5d c3 ba 71 00 00 00
[ 43.195983] NMI backtrace for cpu 0
[ 43.196044] CPU: 0 PID: 0 Comm: swapper/0 Not tainted
3.11.0-rc5upstream-00002-gfb96a1c #1
[ 43.196118] Hardware name: Xen HVM domU, BIOS 4.2.2-pre 08/13/2013
[ 43.196181] task: c176a980 ti: c175e000 task.ti: c175e000
[ 43.196237] EIP: 0060:[<c1001408>] EFLAGS: 00200046 CPU: 0
[ 43.196299] EIP is at xen_hypercall_event_channel_op+0x8/0x20
[ 43.196367] EAX: 00000000 EBX: 00000004 ECX: c175fe34 EDX: c175fe68
[ 43.196429] ESI: f83fe000 EDI: 00000010 EBP: c175fe44 ESP: c175fe24
[ 43.196491] DS: 007b ES: 007b FS: 00d8 GS: 0000 SS: 0068
[ 43.196566] CR0: 8005003b CR2: 00000000 CR3: 2bd5d000 CR4: 000006f0
[ 43.196630] Stack:
[ 43.196660] c1378a7a 00200096 00000000 00000000 00000006 c1795934 f7433600
eba4b654
[ 43.196788] c175fe88 c13781c7 0000a7d6 00200092 f74336b0 00000000 f777dc00
00000000
[ 43.196912] 0e7384cb 0000000a 0e7384cb 0000000a c1077a77 48786f1c eba4b600
f7779d00
[ 43.196933] Call Trace:
[ 43.196933] [<c1378a7a>] ? domU_read_console+0xda/0x110
[ 43.196933] [<c13781c7>] hvc_poll+0xb7/0x260
[ 43.196933] [<c1077a77>] ? pvclock_clocksource_read+0xd7/0x170
[ 43.196933] [<c137855a>] hvc_handle_interrupt+0xa/0x20
[ 43.196933] [<c1103dd4>] handle_irq_event_percpu+0x54/0x200
[ 43.196933] [<c1039d75>] ? xen_clocksource_read+0x25/0x40
[ 43.196933] [<c134b188>] ? info_for_irq+0x8/0x20
[ 43.196933] [<c1103fc1>] handle_irq_event+0x41/0x60
[ 43.196933] [<c1106d98>] handle_edge_irq+0x58/0x100
[ 43.196933] [<c134b914>] __xen_evtchn_do_upcall+0x1d4/0x2e0
[ 43.196933] [<c134ba4b>] xen_evtchn_do_upcall+0x1b/0x30
[ 43.196933] [<c15c3039>] xen_hvm_callback_vector+0x2d/0x32
[ 43.196933] [<c1076cf5>] ? native_safe_halt+0x5/0x10
[ 43.196933] [<c1049ce7>] default_idle+0x17/0xd0
[ 43.196933] [<c10497e6>] arch_cpu_idle+0x26/0x30
[ 43.196933] [<c10cdbfd>] cpu_startup_entry+0x4d/0x1f0
[ 43.196933] [<c15b34a4>] rest_init+0x74/0x80
[ 43.196933] [<c17bcbc5>] start_kernel+0x350/0x356
[ 43.196933] [<c17bc6e6>] ? repair_env_string+0x5b/0x5b
[ 43.196933] [<c17bc369>] i386_start_kernel+0x12c/0x12f
[ 43.196933] Code: cc cc cc b8 1f 00 00 00 0f 01 d9 c3 cc cc cc cc cc cc cc
cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc b8 20 00 00 00 0f 01 d9 <c3> cc
cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc cc
This is with 'console=ttyS0' where it is stuck trying to send an IPI
after the resume and failing:
[ 18.741616] uhci_hcd 0000:00:01.2: port 2 portsc 0083,00
[ 18.749197] hub 1-0:1.0: port 2: status 0101 change 0001
[ 18.853138] hub 1-0:1.0: state 7 ports 2 chg 0004 evt 0000
[ 18.853445] usb 1-2: finish reset-resume
[ 18.960160] usb 1-2: reset full-speed USB device number 2 using uhci_hcd
[ 39.632097] INFO: rcu_sched detected stalls on CPUs/tasks: { 0} (detected by
1, t=21002 jiffies, g=1899, c=1898, q=2059)
[ 39.633076] sending NMI to all CPUs:
[ 39.643741] NMI backtrace for cpu 0
[ 39.643741] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 3.11.0-rc7upstream #1
[ 39.643741] Hardware name: Xen HVM domU, BIOS 4.2.2-pre 08/26/2013
[ 39.643741] task: ffffffff81a13420 ti: ffffffff81a00000 task.ti:
ffffffff81a00000
[ 39.643741] RIP: 0010:[<ffffffff81085736>] [<ffffffff81085736>]
native_safe_halt+0x6/0x10
[ 39.643741] RSP: 0018:ffffffff81a01e58 EFLAGS: 00000286
[ 39.643741] RAX: 00000000ffffffed RBX: ffffffff81a00010 RCX: 0000000000000000
[ 39.643741] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000082
[ 39.643741] RBP: ffffffff81a01e58 R08: 0000000000000000 R09: 0140000000000000
[ 39.643741] R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
[ 39.643741] R13: ffffffff81a00000 R14: ffffffff81a00000 R15: ffffffff81a00010
[ 39.643741] FS: 00007fb3b3f0a700(0000) GS:ffff88003aa00000(0000)
knlGS:0000000000000000
[ 39.643741] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 39.643741] CR2: 0000000000000000 CR3: 000000002a0a7000 CR4: 00000000000006f0
[ 39.643741] Stack:
[ 39.643741] ffffffff81a01e78 ffffffff81054d1a ffffffff81a00010
ffffffff81a00010
[ 39.643741] ffffffff81a01e88 ffffffff81054646 ffffffff81a01ee8
ffffffff810e6f9f
[ 39.643741] ffffffff81b5f900 ffffffff81b682e0 ffffffff81a00010
ffffffff81c70000
[ 39.643741] Call Trace:
[ 39.643741] [<ffffffff81054d1a>] default_idle+0x1a/0xf0
[ 39.643741] [<ffffffff81054646>] arch_cpu_idle+0x26/0x30
[ 39.643741] [<ffffffff810e6f9f>] cpu_startup_entry+0x7f/0x250
[ 39.643741] [<ffffffff8168497f>] rest_init+0x8f/0xa0
[ 39.643741] [<ffffffff81ac90d8>] start_kernel+0x3f2/0x3ff
[ 39.643741] [<ffffffff81ac8b04>] ? repair_env_string+0x5b/0x5b
[ 39.643741] [<ffffffff81ac85f3>] x86_64_start_reservations+0x2a/0x2c
[ 39.643741] [<ffffffff81ac8754>] x86_64_start_kernel+0x15f/0x16e
[ 39.643741] Code: 00 00 00 00 00 55 48 89 e5 fa c9 c3 66 0f 1f 84 00 00 00
00 00 55 48 89 e5 fb c9 c3 66 0f 1f 84 00 00 00 00 00 55 48 89 e5 fb f4 <c9> c3
0f 1f 84 00 00 00 00 00 55 48 89 e5 f4 c9 c3 66 0f 1f 84
[ 39.633076] NMI backtrace for cpu 1
[ 39.633076] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 3.11.0-rc7upstream #1
[ 39.633076] Hardware name: Xen HVM domU, BIOS 4.2.2-pre 08/26/2013
[ 39.633076] task: ffff88003882d800 ti: ffff880038846000 task.ti:
ffff880038846000
[ 39.633076] RIP: 0010:[<ffffffff8107cdb0>] [<ffffffff8107cdb0>]
default_send_IPI_mask_sequence_phys+0xa0/0xe0
[ 39.633076] RSP: 0018:ffff88003aa23b68 EFLAGS: 00000046
[ 39.633076] RAX: 0000000000000400 RBX: 0000000000000002 RCX: 0000000002000000
[ 39.633076] RDX: 0000000000000001 RSI: 0000000000000200 RDI: 0000000000000300
[ 39.633076] RBP: ffff88003aa23ba8 R08: ffffffff81aa41c0 R09: 0000000000000000
[ 39.633076] R10: 0000000000000001 R11: 0000000000000000 R12: 000000000000b0e4
[ 39.633076] R13: ffffffff81aa41c0 R14: 0000000000000400 R15: 0000000000000092
[ 39.633076] FS: 00007f9d0fb9e700(0000) GS:ffff88003aa20000(0000)
knlGS:0000000000000000
[ 39.633076] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 39.633076] CR2: 0000000000000000 CR3: 000000003ed55000 CR4: 00000000000006e0
[ 39.633076] Stack:
[ 39.633076] 0000000000000002 0000000000000001 ffff88003aa23b88
0000000000000000
[ 39.633076] ffffffff81a42400 ffffffff81a42400 0000000000000001
ffffffff81aa4180
[ 39.633076] ffff88003aa23bb8 ffffffff81080152 ffff88003aa23bd8
ffffffff8107ce69
[ 39.633076] Call Trace:
[ 39.633076] <IRQ>
[ 39.633076] [<ffffffff81080152>] physflat_send_IPI_all+0x12/0x20
[ 39.633076] [<ffffffff8107ce69>] arch_trigger_all_cpu_backtrace+0x59/0xa0
[ 39.633076] [<ffffffff8112fa19>] rcu_check_callbacks+0x6c9/0x710
[ 39.633076] [<ffffffff810f1730>] ? tick_nohz_handler+0xc0/0xc0
[ 39.633076] [<ffffffff810a5303>] update_process_times+0x43/0x80
[ 39.633076] [<ffffffff810f1544>] tick_sched_handle+0x34/0x80
[ 39.633076] [<ffffffff810f177f>] tick_sched_timer+0x4f/0x90
[ 39.633076] [<ffffffff810bf99d>] __run_hrtimer+0x7d/0x240
[ 39.633076] [<ffffffff810e8aed>] ? ktime_get_update_offsets+0x4d/0xe0
[ 39.633076] [<ffffffff810bfe4e>] hrtimer_interrupt+0x10e/0x270
[ 39.633076] [<ffffffff81041dcf>] xen_timer_interrupt+0x2f/0x160
[ 39.633076] [<ffffffff81085736>] ? native_safe_halt+0x6/0x10
[ 39.633076] [<ffffffff8112753c>] handle_irq_event_percpu+0x7c/0x240
[ 39.633076] [<ffffffff8112a789>] handle_percpu_irq+0x49/0x70
[ 39.633076] [<ffffffff813c171d>] __xen_evtchn_do_upcall+0x38d/0x3a0
[ 39.633076] [<ffffffff816971e6>] ? __atomic_notifier_call_chain+0x26/0x40
[ 39.633076] [<ffffffff813c176a>] xen_evtchn_do_upcall+0x2a/0x40
[ 39.633076] [<ffffffff8169ceed>] xen_hvm_callback_vector+0x6d/0x80
[ 39.633076] <EOI>
[ 39.633076] [<ffffffff810ce118>] ? sched_clock_cpu+0xb8/0x110
[ 39.633076] [<ffffffff81085736>] ? native_safe_halt+0x6/0x10
[ 39.633076] [<ffffffff81054d1a>] default_idle+0x1a/0xf0
[ 39.633076] [<ffffffff81054646>] arch_cpu_idle+0x26/0x30
[ 39.633076] [<ffffffff810e6f9f>] cpu_startup_entry+0x7f/0x250
[ 39.633076] [<ffffffff810ef775>] ? clockevents_register_device+0x105/0x170
[ 39.633076] [<ffffffff8107a6cf>] start_secondary+0x19f/0x200
[ 39.633076] Code: 0f 1f 00 f3 90 8b 04 25 00 23 5f ff f6 c4 10 75 f2 c1 e1
18 89 0c 25 10 23 5f ff 83 fb 02 44 89 f0 0f 45 c3 89 04 25 00 23 5f ff <eb> 9e
4c 89 ff 57 9d 66 66 90 66 90 48 83 c4 18 5b 41 5c 41 5d
Once more I need to stress that it works great when using 'xm' in Xen 4.2
but fails over when using 'xl' in Xen 4.2.
I can't recall whether 'xl' in Xen 4.2 was considered experiemental or
production ready at that point?
Thoughts? Ideas? Saw this in the past and you know the answer?
On Mon, Aug 26, 2013 at 06:34:10PM -0400, konrad.wilk@xxxxxxxxxx wrote:
> FAILED: TEST:tst001(XEN-x86_64):
> ----------------------------------------------
> tst001 (XEN-x86_64): 3.11.0-rc7upstream ON
> Testing tst001 (XEN-x86_64)
> Test tst001 FAILED:
> host : tst001.dumpdata.com
> release : 3.11.0-rc7upstream
> xen_major : 4
> xen_minor : 2
> xen_changeset : Thu Feb 07 14:24:08 2013 +0000 25979:c713f1f7d3c1
> xen_commandline : com1=115200,8n1 console=com1,vga guest_loglvl=all
> console_to_ring console_timestamps=1 conring_size=2097152 tmem tmem_compress
> tmem_dedup dom0_mem=999M,max:1232M dom0_max_vcpus=2
> cpufreq=xen:performance,verbose loglvl=all apic=debug
> Linux cmdline : earlyprintk=xen debug nofb console=tty console=hvc0
> xen-pciback.hide=(05:00.0)(05:00.1) loglevel=10
> Testing..
> failed: bootstrap-x86_64-pvhvm , ok: bootstrap-i386 bootstrap-x86_64
> bootstrap-i386-pvhvm F19-64 F19-32 F17-64 F17-32 F16-32 F16-64 F15-32 F15-64
> NetBSD FreeBSD RHEL5-64 RHEL5-32 SLES11-32 SLES12-32 OL5_X86_64_PVHVM
> OL5_X86_PVHVM
> tst001 (BAREMETAL-x86_64): 3.11.0-rc7upstream ON
> tst001 (BAREMETAL-i386): 3.11.0-rc7upstream ON
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |