[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] Problems when creating domU on OMAP5



On Tue, Sep 17, 2013 at 12:54:37PM +0100, Julien Grall wrote:
> On 09/16/2013 02:42 PM, Chen Baozi wrote:
> >On Mon, Sep 16, 2013 at 09:18:28PM +0800, Chen Baozi wrote:
> >>Hi all,
> >>
> >>I tried to create a domU on OMAP5 today. But it seems there are still some
> >>problems to solve before I can successfully creat it.
> >>
> >>I first cloned Julien's arndale-domU-3.9 branch which mentioned in wiki.
> >>Then I modified gic addresses xenvm-4.2.dts to meet OMAP5432 requirement:
> >>
> >>--- a/arch/arm/boot/dts/xenvm-4.2.dts
> >>+++ b/arch/arm/boot/dts/xenvm-4.2.dts
> >>@@ -49,13 +49,13 @@
> >>                 reg = <0 0x80000000 0 0x08000000>;
> >>         };
> >>
> >>-       gic: interrupt-controller@2c001000 {
> >>+       gic: interrupt-controller@48211000 {
> >>                 compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic";
> >>                 #interrupt-cells = <3>;
> >>                 #address-cells = <0>;
> >>                 interrupt-controller;
> >>-               reg = <0 0x10481000 0 0x1000>,
> >>-                     <0 0x10482000 0 0x100>;
> >>+               reg = <0 0x48211000 0 0x1000>,
> >>+                     <0 0x48212000 0 0x1000>;
> >>         };
> >>
> >>         timer {
> >>
> >>And make the kernel image as wiki said:
> >>
> >>$ cat arch/arm/boot/zImage arch/arm/boot/xenvm-4.2.dtb > image
> >>
> >>Write a config file used by xl like:
> >>
> >>kernel = "/root/domU/image"
> >>memory = "128"
> >>name = "domU"
> >>vcpus = 1
> >>disk = [ 'phy:/dev/loop0,xvda,w' ]
> >>
> >>Setup loop device:
> >>
> >>$ losetup /dev/loop0 /root/domU/xen-arm.img
> >>
> >>which xen-arm.img is the a bootable rootfs.
> >>
> >>Finally I execute xl to create the domU:
> >>
> >>$ sudo xl create -f config -d
> >>Parsing config from config
> >>unable to format domain config as JSON (YAJL:1)
> >>[   80.685264] Failed to unmap pfn:9bce5 rc:-2
> >>[   80.691741] Failed to unmap pfn:9e7da rc:-2
> >>[   80.696310] Failed to unmap pfn:9bce5 rc:-2
> >>[   80.702494] Failed to unmap pfn:9ba57 rc:-2
> >>[   80.706932] Failed to unmap pfn:9bce3 rc:-2
> >>[   80.718394] Failed to unmap pfn:9bce2 rc:-2
> >>libxl: error: libxl_device.c:894:device_backend_callback: unable to add 
> >>device with path /local/domain/0/backend/vbd/1/51712
> >>libxl: error: libxl_create.c:932:domcreate_launch_dm: unable to add disk 
> >>devices
> >>libxl: error: libxl_device.c:894:device_backend_callback: unable to remove 
> >>device with path /local/domain/0/backend/vbd/1/51712
> >>libxl: error: libxl.c:1451:devices_destroy_cb: libxl__devices_destroy 
> >>failed for 1
> >>(XEN) mm.c:1092:d0 gnttab_mark_dirty not implemented yet
> >>
> >
> >Besides, after few minutes of executing "xl create" command, there are
> >continuous kernel oops message such as:
> 
> I suspect an interrupt problem. I have a patch series that should
> fix the different issues with the interrupts, but I didn't take time
> to rewrite properly :(.
> 
> Can you give a try to the following branch (and your patches) on the omap5?
> 
> git clone -b interrupts-v1
> git://xenbits.xen.org/people/julieng/xen-unstable.git
> 
> Thanks,

Sure, I'll look into your branch and test if it work on the omap5.

Cheers,

Baozi

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.