Re: [Xen-devel] [xen-unstable test] 20099: regressions - trouble: broken/fail/pass

[Ian Campbell <Ian.Campbell@xxxxxxxxxx>]

On Mon, 2013-10-07 at 20:12 +0100, xen.org wrote:
>  test-armhf-armhf-xl           3 host-install(3)              broken never 
> pass

From the serial logs:
        Retrieving file: pxe/pxelinux.cfg/01-fc-2f-40-dd-a8-4c
        Using xgmac0 device
        TFTP from server 10.80.248.135; our IP address is 10.80.229.109; 
sending through gateway 10.80.224.1
        Filename 'pxe/pxelinux.cfg/01-fc-2f-40-dd-a8-4c'.
        Load address: 0x700000
        Loading: #
        done
        Bytes transferred = 506 (1fa hex)
        Config file found
        Ignoring unknown command: serial
        1:      ^Overwrite
        Retrieving file: /osstest/tmp/marilith-n5--initrd.gz
        Using xgmac0 device
        TFTP from server 10.80.248.135; our IP address is 10.80.229.109; 
sending through gateway 10.80.224.1
        Filename '/osstest/tmp/marilith-n5--initrd.gz'.
        Load address: 0x4000000
        Loading: 
        TFTP error: 'File not found' (1)
        Not retrying...
        Skipping overwrite for failure retrieving initrd
        Highbank #

So it seems that u-boot only supports taking the prefix from the
filename when fetching the pxelinux.cfg file and not when fetching any
files referenced from that config.

I've added a symlink /tftpboot/osstest -> pxe/osstest. Bit of a skanky
hack, hopefully we can get u-boot fixed at some point.

Ian.


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel