Xen project Mailing List

>FYI qemu-upstream xen passhthrough currently also doesn't support specifying a request

> for a certain dev/function nr.
> And it is vaguely related to the lacking ability to passthrough multifunction devices as

> multifunction devices. (the xm + qemu_trad require you to specify the virtual dev/func in

> this case, and additional some checks in libxl can't handle the multifunction mask and bail

> out early)

> Sander

But it seems to work in XM toolchain. For example :-

pci = [ '0000:08:00.1=0,2=1,3=2,4=3@0a' ]

ironpass3:~/sles11_sp2_gm # xm pci-list-assignable-devices

0000:08:00.1

0000:08:00.2

0000:08:00.3

0000:08:00.4

ironpass3:~/sles11_sp2_gm # xm create sles11_sp2_gm.xenconfig

Using config file "./sles11_sp2_gm.xenconfig".

Started domain sles11_sp2_gm (id=5)

ironpass3:~/sles11_sp2_gm # uname -a

Linux ironpass3 3.0.93-0.8-xen #1 SMP Tue Aug 27 08:44:18 UTC 2013 (70ed288) x86_64 x86_64 x86_64 GNU/Linux

ironpass3:~/sles11_sp2_gm #

ironpass3:~/sles11_sp2_gm # grep pci sles11_sp2_gm.xenconfig

#pci = [ '0000:08:00.1=0@0a', '0000:08:00.2=0@0b', '0000:08:00.3=0@0c', '0000:08:00.4=0@0d' ]

pci = [ '0000:08:00.1=0,2=1,3=2,4=3@0a' ]

xen_platform_pci=0

ironpass3:~/sles11_sp2_gm #

ironpass3:~/sles11_sp2_gm # lspci -nn -s 08:00

08:00.0 Co-processor [0b40]: Intel Corporation Device [8086:0434] (rev 10)

08:00.1 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

08:00.2 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

08:00.3 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

08:00.4 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

08:00.5 Co-processor [0b40]: Intel Corporation Device [8086:043e] (rev 10)

ironpass3:~/sles11_sp2_gm #

ironpass3:~/sles11_sp2_gm # xm console sles11_sp2_gm

linux-34o4:~ # lspci -nn

00:00.0 Host bridge [0600]: Intel Corporation 440FX - 82441FX PMC [Natoma] [8086:1237] (rev 02)

00:01.0 ISA bridge [0601]: Intel Corporation 82371SB PIIX3 ISA [Natoma/Triton II] [8086:7000]

00:01.1 IDE interface [0101]: Intel Corporation 82371SB PIIX3 IDE [Natoma/Triton II] [8086:7010]

00:01.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113] (rev 01)

00:02.0 VGA compatible controller [0300]: Cirrus Logic GD 5446 [1013:00b8]

00:0a.0 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

00:0a.1 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

00:0a.2 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

00:0a.3 Ethernet controller [0200]: Intel Corporation DH8900CC Series Gigabit Network Connection [8086:0438] (rev 10)

linux-34o4:~ #

>Do you happen to know (or can you easily do the experiment to find out)
>what happens with '0000:07:11.6@1a' on xm? Does the guest see function 0
>or function 6? If it is 0 then I think we can safely say xl will not
>change, but if it is 6 we'll have to have a think...
>Ian.

Each PCI- device have to have function 0. So in the above case it gets 0.

However, we may specify '0000:07:11.6=0@1a' and ''0000:07:11.8=1@1a' and XM does handle it as expected.

However, xl does not allow us to specify device function in the guest.

Is there a way specifying virtual function slot can become a parameter? After all, xm cfg file is supposed to be 100% compatible with 'xl'.

In Xen 4.2.2_06 version, is 'xl' preferred way to instantiate VMs? We currently use 'xm' but wanted to move to 'xl' because it has better support for NUMA alignment and memory backing.

Thanks,

/Saurabh

On Mon, Nov 4, 2013 at 7:45 AM, Ian Campbell <Ian.Campbell@xxxxxxxxxx> wrote:

create ^
title it xl does not support specifying virtual function for passthrough device
thanks

On Thu, 2013-10-31 at 14:29 -0700, Saurabh Mishra wrote:
> In XM toolchain, we use to put pci = [ '0000:07:11.6=0@1a' ] but looks
> like in XL toolchain there is no way to specify function in the guest.

The code is a bit confusing, but that does appear to be the case. libxl
seems to have some degree of support but I can't see any code in xl (or
the libxlu helper library function which parses the PCI options) that
would support the =N@M syntax.

Given the lack of xl support there's a good chance that the libxl
support is relatively untested.

> Kindly let me know.
>
>
> XM - pci = [ '0000:07:11.6=0@1a' ]
> XL - pci = [ '0000:07:11.6@1a' ]
>
>
> In the guest VM we see that PCI device is getting 0 function in both
> the cases however, it may not work the same way in the future.

Do you happen to know (or can you easily do the experiment to find out)
what happens with '0000:07:11.6@1a' on xm? Does the guest see function 0
or function 6? If it is 0 then I think we can safely say xl will not
change, but if it is 6 we'll have to have a think...

Ian.

[Xen-devel] xl does not support specifying virtual function for passthrough device