Xen project Mailing List

On Tue, Nov 19, 2013 at 12:57 PM, Jeremy Fitzhardinge <jeremy@xxxxxxxx> wrote:

After an S3 host resume, I'm seeing:

[48002.772629] ACPI: Low-level resume complete
[48002.772802] PM: Restoring platform NVS memory
[48002.776143] xen_acpi_processor: Uploading Xen processor PM info
[48002.776691] ------------[ cut here ]------------
[48002.776712] WARNING: CPU: 0 PID: 10235 at drivers/base/syscore.c:104 syscore_resume+0x9a/0xe0()
[48002.776751] Interrupts enabled after xen_acpi_processor_resume+0x0/0x34 [xen_acpi_processor]
[48002.776836] Modules linked in: tcp_lp btrfs zlib_deflate raid6_pq xor ufs hfsplus hfs
minix vfat msdos fat jfs xfs libcrc32c reiserfs xt_CHECKSUM tun hidp fuse nf_conntrack_
netbios_ns nf_conntrack_broadcast ipt_MASQUERADE ip6t_REJECT xt_conntrack ebtable_nat eb
table_broute bridge stp llc ebtable_filter ebtables ip6table_nat nf_conntrack_ipv6 nf_de
frag_ipv6 nf_nat_ipv6 ip6table_mangle ip6table_security ip6table_raw ip6table_filter ip6
_tables iptable_nat nf_conntrack_ipv4 nf_defrag_ipv4 nf_nat_ipv4 nf_nat nf_conntrack ipt
able_mangle iptable_security iptable_raw rfcomm bnep snd_hda_codec_hdmi snd_hda_codec_co
nexant iTCO_wdt iTCO_vendor_support arc4 x86_pkg_temp_thermal coretemp iwldvm microcode
btusb snd_hda_intel mac80211 bluetooth joydev snd_hda_codec snd_hwdep snd_seq serio_raw
iwlwifi i2c_i801 snd_seq_device
[48002.776894] snd_pcm cfg80211 sdhci_pci sdhci mmc_core thinkpad_acpi wmi tpm_tis e100
0e rfkill snd_page_alloc tpm tpm_bios snd_timer ptp snd mei_me mei soundcore shpchp lpc_
ich pps_core mfd_core mperf xen_acpi_processor xen_netback xen_blkback xen_gntdev xen_ev
tchn xenfs xen_privcmd uinput binfmt_misc nfsd auth_rpcgss nfs_acl lockd sunrpc dm_crypt
crc32_pclmul crc32c_intel i915 ghash_clmulni_intel i2c_algo_bit drm_kms_helper drm i2c_
core video
[48002.776903] CPU: 0 PID: 10235 Comm: systemd-sleep Not tainted 3.11.7-200.fc19.x86_64 #1
[48002.776905] Hardware name: LENOVO 4286CTO/4286CTO, BIOS 8DET59WW (1.29 ) 04/02/2012
[48002.776917] 0000000000000009 ffff8801c7697d30 ffffffff8164777b ffff8801c7697d78
[48002.776924] ffff8801c7697d68 ffffffff8106715d ffffffffa01f6000 0000000000000003
[48002.776931] ffff8801c7697e08 ffff8801fd970000 0000000000000000 ffff8801c7697dc8
[48002.776933] Call Trace:
[48002.776949] [<ffffffff8164777b>] dump_stack+0x45/0x56
[48002.776959] [<ffffffff8106715d>] warn_slowpath_common+0x7d/0xa0
[48002.776972] [<ffffffff810671cc>] warn_slowpath_fmt+0x4c/0x50
[48002.776989] [<ffffffffa01f4bb0>] ? xen_upload_processor_pm_data+0x300/0x300 [xen_acpi_processor]
[48002.776996] [<ffffffff813f252a>] syscore_resume+0x9a/0xe0
[48002.777006] [<ffffffff810abd7c>] suspend_devices_and_enter+0x40c/0x480
[48002.777014] [<ffffffff810abf68>] pm_suspend+0x178/0x260
[48002.777020] [<ffffffff810aae19>] state_store+0x79/0xf0
[48002.777033] [<ffffffff812fc4af>] kobj_attr_store+0xf/0x20
[48002.777043] [<ffffffff8121a226>] sysfs_write_file+0xc6/0x140
[48002.777054] [<ffffffff811a819d>] vfs_write+0xbd/0x1e0
[48002.777062] [<ffffffff811a8bd9>] SyS_write+0x49/0xa0
[48002.777073] [<ffffffff81656999>] system_call_fastpath+0x16/0x1b
[48002.777077] ---[ end trace 15c5658c596be9f3 ]---
[48002.777081] Enabling non-boot CPUs ...

I wonder if this is a result of upload_pm_data()'s use of mutexes, which
being a sleeping synchronization operation, shouldn't be done in an
interrupt-off context.

I'm also having the machine hang in the suspended state on resume
sometimes (that is, I open the lid/hit a key/press power to resume the
laptop, but the sleep light keeps pulsing and I can't get it out of that
state without a forced power-off. I wonder if these are related.

This is with the stock Fedora 19 kernel, but I don't think there are any
differences from upstream in this area?

There was a commit in 3.12 to handle systems with reduced hardware sleep - but that would be a failure 100% of the time - not intermittent.

What version of Xen are you running?

Ben

Thanks,
J

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

Re: [Xen-devel] Xen S3 host resume: "Interrupts enabled after xen_acpi_processor_resume+0x0/0x34"