[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] TSC trouble in hvm linux, after host S3

Hello. I'm trying to debug a problem of linux hvms (3.11.7 dom0 kernel, xen 4.3.1, guest kernels tried were 3.2, 3.5, 3.8), using tsc as clocksource, hanging some time after host S3 has been performed. I'm using the default tsc_mode (also tried never emulate to make sure), vtsc is off.

It seems linux tsc clocksource code expects the counter to be reset to 0 after S3 resume, except on some Atom chips who guarantee constant tsc thru S3 (I'm not testing on these though). That doesn't seem to be case. I dumped results of rtdsc() both in dom0 and the linux guest. It seems that in dom0 the tsc after S3 restarts to 0 as expected, in the linux hvm however it goes into negative values. As soon as it wraps back to 0, timekeeping in linux gets broken.

The negativeness seem to be because there is some offsetting being done to the tsc in hvm guest -> I sort of expected that since vtsc on that hvm is off, the values returned by rdtsc() would match, that is however not the case, when the hvm guest boots the tsc in there seems to start from 0, not from the current rdtsc value in dom0. So, after host S3, my linux hvm has about equivalent time to live as the delta between xen boot and guest boot (i.e. if i booted the hvm 2mins after host boot, it will hang ~2mins after host s3 since thats when the tsc will wrap)

Any ideas on cause/fix? Why the tsc in hvm guest is offset from dom0 one even 

Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.