[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] Re: [Xen-devel] [PATCH v2] Enable serial output for Oxford Semiconductor PCIe cards and fixes.
On Fri, Mar 07, 2014 at 03:27:35PM -0600, Aravind Gopalakrishnan wrote: > On 3/7/2014 1:01 PM, Konrad Rzeszutek Wilk wrote: > >Since v1 > >[http://mid.gmane.org/1394040334-16278-1-git-send-email-konrad.wilk@xxxxxxxxxx]: > > - Update it per Jan and Andrew comments > > - Tackle on two bug-fixes. > > > > > >Hey, > > > >This is the second, posting of the changes to the ns16550 driver > >to also support other chipsets - like the Oxford 16C950 one - popular on > >the inexpensive Rosewill RC-300E. > > > >There are also two bug-fixes that I discovered while testing my code. > >One of them was found through code inspection while the other was > >when I was testing my code. > > > >Of interest is: > > [PATCH v2 3/7] serial: Support OXPCIe952 aka Oxford Semiconductor > > > > that enables the functionality on the PCIe card I have - while the rest > >of the patches flesh out the code to support more of PCI and PCIe type cards. > > > > xen/arch/x86/oprofile/op_model_athlon.c | 5 +- > > xen/arch/x86/x86_64/mmconf-fam10h.c | 1 + > > xen/arch/x86/x86_64/mmconfig-shared.c | 1 + > > xen/arch/x86/x86_64/mmconfig.h | 7 - > > xen/drivers/char/ns16550.c | 254 > > ++++++++++++++++++++++++++++-- > > xen/include/xen/pci_ids.h | 12 ++ > > 6 files changed, 253 insertions(+), 27 deletions(-) > > > >Konrad Rzeszutek Wilk (7): > > serial: Skip over PCIe device which have no quirks (fix AMT > > regression). > > serial: Fix COM1 assumption if pci_uart_config did not find the PCI > > serial card. > > serial: Support OXPCIe952 aka Oxford Semiconductor Ltd Device c138 > > (1415:c138) > > serial: Seperate the PCI device ids and parameters > > serial: Use #defines for PCI vendors. > > serial: Expand the PCI serial quirks for OXPCIe200 and OXPCIe952 1 > > Native UART > > pci: Put all PCI device vendor and models in one file. > > > > > > Tested the patch set with Broadcom Trumanage MMIO device just to > make sure there are no regressions and can verify that it works > fine.. Thank you! > > Thanks, > -Aravind. > _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |