[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v2] xen: arm: increase priority of SGIs used as IPIs



Code such as on_selected_cpus expects/requires that an IPI can preempt a
processor which is just handling a normal interrupt. Lacking this property can
result in a deadlock between two CPUs trying to IPI each other from interrupt
context.

For the time being there is only two priorities, IRQ and IPI, although it is
also conceivable that in the future some IPIs might be higher priority than
others. This could be used to implement a better BUG() than we have now, but I
haven't tackled that yet.

Tested with a debug patch which sends a local IPI from a keyhandler, which is
run in serial interrupt context.

This should also fix the issue reported by Oleksandr in "xen/arm:
maintenance_interrupt SMP fix" without resorting to trylock.

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Acked-by: Julien Grall <julien.grall@xxxxxxxxxx>
Cc: Oleksandr Tyshchenko <oleksandr.tyshchenko@xxxxxxxxxxxxxxx>
---
v2: Rebased onto current staging. Split comment in two to clarify.

Since this already has Julien's ack I intend to commit quote soon.
---
 xen/arch/arm/gic.c        |   22 +++++++++++++++-------
 xen/arch/arm/time.c       |    6 +++---
 xen/include/asm-arm/gic.h |   22 ++++++++++++++++++++++
 3 files changed, 40 insertions(+), 10 deletions(-)

diff --git a/xen/arch/arm/gic.c b/xen/arch/arm/gic.c
index f08b3b4..0513138 100644
--- a/xen/arch/arm/gic.c
+++ b/xen/arch/arm/gic.c
@@ -322,7 +322,8 @@ static void __init gic_dist_init(void)
 
     /* Default priority for global interrupts */
     for ( i = 32; i < gic.lines; i += 4 )
-        GICD[GICD_IPRIORITYR + i / 4] = 0xa0a0a0a0;
+        GICD[GICD_IPRIORITYR + i / 4] =
+            GIC_PRI_IRQ<<24 | GIC_PRI_IRQ<<16 | GIC_PRI_IRQ<<8 | GIC_PRI_IRQ;
 
     /* Disable all global interrupts */
     for ( i = 32; i < gic.lines; i += 32 )
@@ -343,9 +344,14 @@ static void __cpuinit gic_cpu_init(void)
      * be set up here with the other per-cpu state. */
     GICD[GICD_ICENABLER] = 0xffff0000; /* Disable all PPI */
     GICD[GICD_ISENABLER] = 0x0000ffff; /* Enable all SGI */
-    /* Set PPI and SGI priorities */
-    for (i = 0; i < 32; i += 4)
-        GICD[GICD_IPRIORITYR + i / 4] = 0xa0a0a0a0;
+    /* Set SGI priorities */
+    for (i = 0; i < 16; i += 4)
+        GICD[GICD_IPRIORITYR + i / 4] =
+            GIC_PRI_IPI<<24 | GIC_PRI_IPI<<16 | GIC_PRI_IPI<<8 | GIC_PRI_IPI;
+    /* Set PPI priorities */
+    for (i = 16; i < 32; i += 4)
+        GICD[GICD_IPRIORITYR + i / 4] =
+            GIC_PRI_IRQ<<24 | GIC_PRI_IRQ<<16 | GIC_PRI_IRQ<<8 | GIC_PRI_IRQ;
 
     /* Local settings: interface controller */
     GICC[GICC_PMR] = 0xff;                /* Don't mask by priority */
@@ -541,7 +547,8 @@ void gic_disable_cpu(void)
 void gic_route_ppis(void)
 {
     /* GIC maintenance */
-    gic_route_dt_irq(&gic.maintenance, cpumask_of(smp_processor_id()), 0xa0);
+    gic_route_dt_irq(&gic.maintenance, cpumask_of(smp_processor_id()),
+                     GIC_PRI_IRQ);
     /* Route timer interrupt */
     route_timer_interrupt();
 }
@@ -556,7 +563,8 @@ void gic_route_spis(void)
         if ( (irq = serial_dt_irq(seridx)) == NULL )
             continue;
 
-        gic_route_dt_irq(irq, cpumask_of(smp_processor_id()), 0xa0);
+        gic_route_dt_irq(irq, cpumask_of(smp_processor_id()),
+                         GIC_PRI_IRQ);
     }
 }
 
@@ -779,7 +787,7 @@ int gic_route_irq_to_guest(struct domain *d, const struct 
dt_irq *irq,
     level = dt_irq_is_level_triggered(irq);
 
     gic_set_irq_properties(irq->irq, level, cpumask_of(smp_processor_id()),
-                           0xa0);
+                           GIC_PRI_IRQ);
 
     retval = __setup_irq(desc, irq->irq, action);
     if (retval) {
diff --git a/xen/arch/arm/time.c b/xen/arch/arm/time.c
index 22e94bb..ba281e9 100644
--- a/xen/arch/arm/time.c
+++ b/xen/arch/arm/time.c
@@ -222,11 +222,11 @@ static void vtimer_interrupt(int irq, void *dev_id, 
struct cpu_user_regs *regs)
 void __cpuinit route_timer_interrupt(void)
 {
     gic_route_dt_irq(&timer_irq[TIMER_PHYS_NONSECURE_PPI],
-                     cpumask_of(smp_processor_id()), 0xa0);
+                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
     gic_route_dt_irq(&timer_irq[TIMER_HYP_PPI],
-                     cpumask_of(smp_processor_id()), 0xa0);
+                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
     gic_route_dt_irq(&timer_irq[TIMER_VIRT_PPI],
-                     cpumask_of(smp_processor_id()), 0xa0);
+                     cpumask_of(smp_processor_id()), GIC_PRI_IRQ);
 }
 
 /* Set up the timer interrupt on this CPU */
diff --git a/xen/include/asm-arm/gic.h b/xen/include/asm-arm/gic.h
index 9c6f9bb..25b2b24 100644
--- a/xen/include/asm-arm/gic.h
+++ b/xen/include/asm-arm/gic.h
@@ -129,6 +129,28 @@
 #define GICH_LR_CPUID_SHIFT     9
 #define GICH_VTR_NRLRGS         0x3f
 
+/*
+ * The minimum GICC_BPR is required to be in the range 0-3. We set
+ * GICC_BPR to 0 but we must expect that it might be 3. This means we
+ * can rely on premption between the following ranges:
+ * 0xf0..0xff
+ * 0xe0..0xdf
+ * 0xc0..0xcf
+ * 0xb0..0xbf
+ * 0xa0..0xaf
+ * 0x90..0x9f
+ * 0x80..0x8f
+ *
+ * Priorities within a range will not preempt each other.
+ *
+ * A GIC must support a mimimum of 16 priority levels.
+ */
+#define GIC_PRI_LOWEST     0xf0
+#define GIC_PRI_IRQ        0xa0
+#define GIC_PRI_IPI        0x90 /* IPIs must preempt normal interrupts */
+#define GIC_PRI_HIGHEST    0x80 /* Higher priorities belong to Secure-World */
+
+
 #ifndef __ASSEMBLY__
 #include <xen/device_tree.h>
 
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.