[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH OSSTEST 2/2] standalone mode convenience frontend
I can never remember all the various env vars which I can/should set so this tool provides a command line veneer over the basics. It also does some sanity checks for things which keep tripping me up (inability to read apache logs, lack of ssh-agent) which fail in more or less obscure ways. Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx> --- standalone | 231 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 231 insertions(+) create mode 100755 standalone diff --git a/standalone b/standalone new file mode 100755 index 0000000..00fb707 --- /dev/null +++ b/standalone @@ -0,0 +1,231 @@ +#!/bin/bash + +set -e + +usage() { + cat >&2 <<EOF +usage: standalone [operations] [options...] + +Operations: + +* make-flight [cf] [BRANCH] + + Create a flight testing the named branch. + +* set-paths [cf] [JOB] + + Setup dist path runvars for JOB from existing build results. Useful + after recreating a flight to avoid the need to rebuild. + +* run-job [cfhrR] [JOB] + + Run the named JOB. + + Required options: -h HOST + +* run-test [cfhrR] [JOB] [TEST] + + Run the named TEST as part of JOB. + + Required options: -h HOST + +Options: + +-c FILE, --config=FILE Use FILE as configuration file +-f FLIGHT, --flight=FLIGHT Operate on FLIGHT +-h HOST, --host=HOST Test host +-r, --reuse Do not wipe test host (default) +-R, --noreuse, --noreinstall Wipe the test host (if job or test does so) + +--help This message + +EOF +} + +if [ $# -lt 1 ] ; then + echo "Need an operation" >&2 + usage + exit 1 +fi + +op=$1 ; shift + +if [ x$op = x--help ] ; then + usage + exit 0 +fi + +TEMP=$(getopt -o c:f:h:rR --long config:,flight:,host:,reuse,noreuse,reinstall,help -- "$@") + +eval set -- "$TEMP" + +config= +flight="standalone" +host= +reuse=1 # Don't blow away machines by default + +while true ; do + case "$1" in + -c|--config) config=$2; shift 2;; + -f|--flight) flight=$2; shift 2;; + -h|--host) host=$2; shift 2;; + -r|--reuse) reuse=1; shift 1;; + -R|--noreuse|--reinstall)reuse=0;shift 1;; + --help) usage; exit 0;; + --) shift ; break ;; + *) echo "Internal error!" ; exit 1 ;; + + esac +done + +if [ ! -r /var/log/apache2/access.log ] ; then + echo "WARNING: Cannot read apache logs. Some tests may fail" >&2 +fi + +if ! ssh-add -l >/dev/null ] ; then + echo "WARNING: Unable to access ssh-agent. Some tests may fail" >&2 +fi + +if [ $reuse -eq 0 ]; then + echo "WARNING: Will blow away machine..." + echo "Press ENTER to confirm." + read +fi + +if [ ! -f standalone.db ] ; then + echo "No standalone.db? Run standalone-reset." >&2 + exit 1 +fi + +need_flight() { + if [ -z "$flight" ] ; then + echo "run-job: Need a flight" >&2 + exit 1 + fi +} +need_host() { + if [ -z "$host" ] ; then + echo "run-job: Need a host" >&2 + exit 1 + fi +} + +ensure_logs() { + if [ ! -d "logs" ] ; then + mkdir "logs" + fi + if [ ! -d "logs/$flight" ] ; then + mkdir "logs/$flight" + fi +} + +# other potential ops: +# - run standalone reset + +case $op in + help) + usage + exit 0 + ;; + + make-flight) + need_flight + + if [ $# -lt 1 ] ; then + echo "make-flight: Need branch" >&2 + exit 1 + fi + + branch=$1; shift + + env DAILY_BRANCH_PREEXEC_HOOK=exit\ 0 \ + OSSTEST_USE_HEAD=y \ + BRANCHES_ALWAYS="$branch" \ + OSSTEST_FLIGHT=$flight \ + OSSTEST_CONFIG=$config \ + OSSTEST_NO_BASELINE=y \ + ./cr-daily-branch $@ $branch + ;; + + set-paths) + need_flight + + if [ $# -lt 1 ] ; then + echo "set-paths: Need job" >&2 + exit 1 + fi + +#build-amd64 path_dist build/dist.tar.gz +#build-amd64 path_kerndist build/kerndist.tar.gz +#build-amd64-pvops path_kerndist build/kerndist.tar.gz +#build-amd64 path_xendist build/xendist.tar.gz + + job=$1; shift + + for d in '' xen kern ; do + runvar="path_${d}dist" + path="build/${d}dist.tar.gz" + if [ -f "logs/$flight/$job/$path" ] ; then + ./cs-adjust-flight -v $flight runvar-set $job $runvar $path + fi + done + + if [ -f "logs/$flight/$job/build/kerndist.tar.gz" ] ; then + KERNEL_VER=$(tar tzf logs/$flight/$job/build/kerndist.tar.gz |\ + sed -n -e 's,^lib/modules/\(.*\)/modules.dep$,\1,p') + if [ -n "$KERNEL_VER" ]; then + ./cs-adjust-flight -v $flight \ + runvar-set $job kernel_ver $KERNEL_VER + fi + fi + ;; + + run-job) + need_flight; need_host + + if [ $# -lt 1 ] ; then + echo "run-job: Need job" >&2 + exit 1 + fi + + job=$1; shift + + ensure_logs + + env OSSTEST_CONFIG=$config \ + OSSTEST_FLIGHT=$flight \ + OSSTEST_HOST_HOST=$host \ + OSSTEST_HOST_REUSE=$reuse \ + ./sg-run-job $job 2>&1 | tee logs/$flight/$job.log + rc=${PIPESTATUS[0]} + if [ $rc -ne 0 ] ; then + echo "FAILED rc=${rc}" >&2 + fi + ;; + run-test) + need_flight; need_host + + if [ $# -lt 2 ] ; then + echo "run-test: Need job + test" >&2 + exit 1 + fi + + job=$1; shift + ts=$1; shift + + ensure_logs + + env OSSTEST_CONFIG=$config \ + OSSTEST_FLIGHT=$flight \ + OSSTEST_CONFIG=$config \ + OSSTEST_HOST_REUSE=$reuse \ + OSSTEST_JOB=$job \ + ./$ts host=$host $@ 2>&1 | tee logs/$flight/$job.$ts.log + rc=${PIPESTATUS[0]} + if [ $rc -ne 0 ] ; then + echo "FAILED rc=${rc}" >&2 + fi + ;; + *) + echo "Unknown op $op" ; exit 1 ;; +esac -- 1.8.5.2 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |