[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [v4][PATCH 2/5] xen, gfx passthrough: create intel isa bridge



Tuesday, June 3, 2014, 1:42:44 PM, you wrote:

> On 06/03/2014 12:29 PM, Stefano Stabellini wrote:
>> On Tue, 3 Jun 2014, Paolo Bonzini wrote:
>>> Il 30/05/2014 10:59, Tiejun Chen ha scritto:
>>>> +static int create_pch_isa_bridge(PCIBus *bus, XenHostPCIDevice *hdev)
>>>> +{
>>>> +    struct PCIDevice *dev;
>>>> +
>>>> +    char rid;
>>>> +
>>>> +    dev = pci_create(bus, PCI_DEVFN(0x1f, 0), "intel-pch-isa-bridge");
>>> This is really a huge hack.  You're going to have two ISA bridge devices in
>>> the machine, with the BIOS imagining that the "good" one is at 1f.0 and the
>>> ACPI tables actually describing the other one.  But the PCI device at 1f.0
>>> remains there and a driver in the OS could catch it---not just
>>> intel_detect_pch---and if you want to add such a hack it should be done in 
>>> the
>>> Xen management layers.
>>>
>>> If possible, the host bridge patches are even worse.  If you change the 
>>> vendor
>>> and device ID while keeping the registers of the i440FX you're going to get
>>> conflicts or break firmware badly; TianoCore and SeaBIOS both expect the
>>> normal i440FX vendor and device IDs, for example.
>>>
>>> The hardcoded list of offsets is also not acceptable.  It is also not clear
>>> who is accessing the registers, whether the BIOS or the driver. For Linux, a
>>> cursory look at the driver shows that it only accesses 0x50/0x52 of the 
>>> listed
>>> offsets, but also 0x44/0x48 ("MCH BAR"), what happens if that code path is
>>> encountered?
>>>
>>> The main problem with IGD passthrough is the incestuous (and that's a
>>> euphemism) relationship between the MCH, PCH and graphics driver.  It may 
>>> make
>>> sense at the hardware level, but for virtualization it doesn't.  A
>>> virt-specific driver for GPU command passthrough (with aid from the kernel
>>> driver, but abstracting all the MCH/PCH-dependent details) would make much
>>> more sense.
>>>
>>> It's really not your fault, there's not much you can do given the hardware
>>> architecture.  But I don't think this code can be accepted upstream, sorry.
>> Yeah, the code is not nice and it is not Tiejun's fault.
>>
>> Is there any way at all he could change the patch series to make it more
>> appealing to you? Or maybe we could having more clearly separated from
>> the rest of the codebase?
>>
>>
>> Otherwise I hate to have to diverge again from upstream QEMU but given
>> that we were already carrying these changes in the old
>> qemu-xen-traditional tree without issues, I feel that it would be unfair
>> for me not to merge them in the upstream based qemu-xen tree.
>> Unfortunately I imagine that the lack of this feature could be
>> considered a regression for us.
>>
>> Do the other Xen maintainters have any opinions on this? I would
>> appreciate your opinions.

> Well my very initial take is to say that it was a mistake to accept the 
> IGD stuff into qemu-xen-traditional before making sure that it would be 
> suitable for qemu-upstream.  Avoiding having a fork again (or 
> maintaining a set of out-of-tree patches) is more important than this 
> one feature, IMHO.

> When Intel submitted this for qemu-xen-traditional, we should have 
> recommended to them at that time to start with qemu-upstream; or, we 
> should have made it clear that if they chose to submit it to 
> qemu-xen-traditional first, they would be taking the risk of having it 
> only be there.  If we didn't warn them of that, that was a mistake on 
> our part; but I don't think we can do anything other than apologize.  
> (And of course see if there *is* a way to actually get it upstream.)

>   -George

Which make me wonder how much of the hackery is due to fundamental passthrough
issues of vga devices and how much is due to driver/firmware assumptions made 
because the 
driver/firmware was made with an integrated device in mind ?

The first part (probably legacy vga stuff) would probably be acceptable since 
it's probably shared for all vga devices (vendor independent) and would also be 
required for KVM.

The last part should perhaps be fixed in the driver/firmware (for instance 
the assumption the device is always device 00:02.0, that's valid for real intel 
hardware, but not necessary for passthrough or emulation). A requirement for 
using the latest firmware/drivers for passthrough to work could be acceptable i 
guess ?

--
Sander




_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.