[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v11 3/6] remus: introduce remus device



introduce remus device, an abstract layer of remus devices(nic, disk,
etc).It provides the following APIs for libxl:
  >libxl__remus_device_setup
    setup remus devices, like attach qdisc, enable disk buffering, etc
  >libxl__remus_device_teardown
    teardown devices
  >libxl__remus_device_postsuspend
  >libxl__remus_device_preresume
  >libxl__remus_device_commit
    above three are for checkpoint.
through remus device layer, the remus execution flow will be like
this:
  xl remus -> remus device setup
                |-> remus checkpoint(postsuspend, preresume, commit)
                      ...
                       |-> remus device teardown, failover or abort
the remus device layer provides an interface
  libxl__remus_device_ops
which a remus device must implement. the whole remus structure:
                            |remus|
                               |
                        |remus device|
                               |
                |nic| |drbd disks| |qemu disks| ...
a device(nic, drbd disks, qemu disks, etc) must implement
libxl__remus_device_ops to support remus.

Signed-off-by: Yang Hongyang <yanghy@xxxxxxxxxxxxxx>
Signed-off-by: Wen Congyang <wency@xxxxxxxxxxxxxx>
Signed-off-by: Lai Jiangshan <laijs@xxxxxxxxxxxxxx>
---
 tools/libxl/Makefile             |   2 +
 tools/libxl/libxl.c              |  34 ++++-
 tools/libxl/libxl_dom.c          | 132 +++++++++++++++--
 tools/libxl/libxl_internal.h     | 182 +++++++++++++++++++++++
 tools/libxl/libxl_remus_device.c | 313 +++++++++++++++++++++++++++++++++++++++
 tools/libxl/libxl_types.idl      |   1 +
 6 files changed, 648 insertions(+), 16 deletions(-)
 create mode 100644 tools/libxl/libxl_remus_device.c

diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index a572dca..7a722a8 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -56,6 +56,8 @@ else
 LIBXL_OBJS-y += libxl_nonetbuffer.o
 endif
 
+LIBXL_OBJS-y += libxl_remus_device.o
+
 LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o
 LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o
 
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 900b8d4..2efc154 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -709,6 +709,31 @@ out:
 static void remus_failover_cb(libxl__egc *egc,
                               libxl__domain_suspend_state *dss, int rc);
 
+static void libxl__remus_setup_failed(libxl__egc *egc,
+                                      libxl__remus_state *rs, int rc)
+{
+    STATE_AO_GC(rs->ao);
+    libxl__ao_complete(egc, ao, rc);
+}
+
+static void libxl__remus_setup_done(libxl__egc *egc,
+                                    libxl__remus_state *rs, int rc)
+{
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rs, *dss, rs);
+    STATE_AO_GC(rs->ao);
+
+    if (!rc) {
+        libxl__domain_suspend(egc, dss);
+        return;
+    }
+
+    LOG(ERROR, "Remus: failed to setup device for guest with domid %u",
+        dss->domid);
+    rs->saved_rc = rc;
+    rs->callback = libxl__remus_setup_failed;
+    libxl__remus_device_teardown(egc, rs);
+}
+
 /* TODO: Explicit Checkpoint acknowledgements via recv_fd. */
 int libxl_domain_remus_start(libxl_ctx *ctx, libxl_domain_remus_info *info,
                              uint32_t domid, int send_fd, int recv_fd,
@@ -737,10 +762,15 @@ int libxl_domain_remus_start(libxl_ctx *ctx, 
libxl_domain_remus_info *info,
 
     assert(info);
 
-    /* TBD: Remus setup - i.e. attach qdisc, enable disk buffering, etc */
+    /* Convenience aliases */
+    libxl__remus_state *const rs = &dss->rs;
+    rs->ao = ao;
+    rs->domid = domid;
+    rs->saved_rc = 0;
+    rs->callback = libxl__remus_setup_done;
 
     /* Point of no return */
-    libxl__domain_suspend(egc, dss);
+    libxl__remus_device_setup(egc, rs);
     return AO_INPROGRESS;
 
  out:
diff --git a/tools/libxl/libxl_dom.c b/tools/libxl/libxl_dom.c
index c11993d..dde8bf6 100644
--- a/tools/libxl/libxl_dom.c
+++ b/tools/libxl/libxl_dom.c
@@ -1426,6 +1426,17 @@ static void libxl__domain_suspend_callback(void *data)
     domain_suspend_callback_common(egc, dss);
 }
 
+static void remus_device_postsuspend_cb(libxl__egc *egc,
+                                        libxl__remus_state *rs, int rc)
+{
+    int ok = 0;
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rs, *dss, rs);
+
+    if (!rc)
+        ok = 1;
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
 static void domain_suspend_callback_common_done(libxl__egc *egc,
                                 libxl__domain_suspend_state *dss, int ok)
 {
@@ -1447,32 +1458,51 @@ static void libxl__remus_domain_suspend_callback(void 
*data)
 static void remus_domain_suspend_callback_common_done(libxl__egc *egc,
                                 libxl__domain_suspend_state *dss, int ok)
 {
-    /* REMUS TODO: Issue disk and network checkpoint reqs. */
+    if (!ok)
+        goto out;
+
+    libxl__remus_state *const rs = &dss->rs;
+    rs->callback = remus_device_postsuspend_cb;
+    libxl__remus_device_postsuspend(egc, rs);
+    return;
+
+out:
     libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
 }
 
-static void libxl__remus_domain_resume_callback(void *data)
+static void remus_device_preresume_cb(libxl__egc *egc,
+                                      libxl__remus_state *rs, int rc)
 {
     int ok = 0;
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rs, *dss, rs);
+    STATE_AO_GC(dss->ao);
+
+    if (!rc) {
+        /* Resumes the domain and the device model */
+        if (!libxl__domain_resume(gc, dss->domid, /* Fast Suspend */1))
+            ok = 1;
+    }
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, ok);
+}
+
+static void libxl__remus_domain_resume_callback(void *data)
+{
     libxl__save_helper_state *shs = data;
     libxl__egc *egc = shs->egc;
     libxl__domain_suspend_state *dss = CONTAINER_OF(shs, *dss, shs);
     STATE_AO_GC(dss->ao);
 
-    /* Resumes the domain and the device model */
-    if (libxl__domain_resume(gc, dss->domid, /* Fast Suspend */1))
-        goto out;
-
-    /* REMUS TODO: Deal with disk. Start a new network output buffer */
-    ok = 1;
-out:
-    libxl__xc_domain_saverestore_async_callback_done(egc, shs, ok);
+    libxl__remus_state *const rs = &dss->rs;
+    rs->callback = remus_device_preresume_cb;
+    libxl__remus_device_preresume(egc, rs);
 }
 
 /*----- remus asynchronous checkpoint callback -----*/
 
 static void remus_checkpoint_dm_saved(libxl__egc *egc,
                                       libxl__domain_suspend_state *dss, int 
rc);
+static void remus_next_checkpoint(libxl__egc *egc, libxl__ev_time *ev,
+                                  const struct timeval *requested_abs);
 
 static void libxl__remus_domain_checkpoint_callback(void *data)
 {
@@ -1489,13 +1519,67 @@ static void 
libxl__remus_domain_checkpoint_callback(void *data)
     }
 }
 
+static void remus_device_commit_cb(libxl__egc *egc,
+                                   libxl__remus_state *rs, int rc)
+{
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rs, *dss, rs);
+
+    STATE_AO_GC(dss->ao);
+
+    if (rc) {
+        LOG(ERROR, "Failed to do device commit op."
+            " Terminating Remus..");
+        goto out;
+    } else {
+        /* Set checkpoint interval timeout */
+        rc = libxl__ev_time_register_rel(gc, &rs->timeout,
+                                         remus_next_checkpoint,
+                                         dss->interval);
+        if (rc) {
+            LOG(ERROR, "unable to register timeout for next epoch."
+                " Terminating Remus..");
+            goto out;
+        }
+    }
+    return;
+
+out:
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
 static void remus_checkpoint_dm_saved(libxl__egc *egc,
                                       libxl__domain_suspend_state *dss, int rc)
 {
-    /* REMUS TODO: Wait for disk and memory ack, release network buffer */
-    /* REMUS TODO: make this asynchronous */
-    assert(!rc); /* REMUS TODO handle this error properly */
-    usleep(dss->interval * 1000);
+    /* Convenience aliases */
+    libxl__remus_state *const rs = &dss->rs;
+
+    STATE_AO_GC(dss->ao);
+
+    if (rc) {
+        LOG(ERROR, "Failed to save device model. Terminating Remus..");
+        goto out;
+    }
+
+    rs->callback = remus_device_commit_cb;
+    libxl__remus_device_commit(egc, rs);
+
+    return;
+
+out:
+    libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 0);
+}
+
+static void remus_next_checkpoint(libxl__egc *egc, libxl__ev_time *ev,
+                                  const struct timeval *requested_abs)
+{
+    libxl__remus_state *rs = CONTAINER_OF(ev, *rs, timeout);
+
+    /* Convenience aliases */
+    libxl__domain_suspend_state *const dss = CONTAINER_OF(rs, *dss, rs);
+
+    STATE_AO_GC(dss->ao);
+
+    libxl__ev_time_deregister(gc, &rs->timeout);
     libxl__xc_domain_saverestore_async_callback_done(egc, &dss->shs, 1);
 }
 
@@ -1720,6 +1804,13 @@ static void save_device_model_datacopier_done(libxl__egc 
*egc,
     dss->save_dm_callback(egc, dss, our_rc);
 }
 
+static void libxl__remus_teardown_done(libxl__egc *egc,
+                                       libxl__remus_state *rs, int rc)
+{
+    libxl__domain_suspend_state *dss = CONTAINER_OF(rs, *dss, rs);
+    dss->callback(egc, dss, rc);
+}
+
 static void domain_suspend_done(libxl__egc *egc,
                         libxl__domain_suspend_state *dss, int rc)
 {
@@ -1734,6 +1825,19 @@ static void domain_suspend_done(libxl__egc *egc,
         xc_suspend_evtchn_release(CTX->xch, CTX->xce, domid,
                            dss->guest_evtchn.port, &dss->guest_evtchn_lockfd);
 
+    if (dss->remus) {
+        /*
+         * With Remus, if we reach this point, it means either
+         * backup died or some network error occurred preventing us
+         * from sending checkpoints. Teardown the network buffers and
+         * release netlink resources.  This is an async op.
+         */
+        dss->rs.saved_rc = rc;
+        dss->rs.callback = libxl__remus_teardown_done;
+        libxl__remus_device_teardown(egc, &dss->rs);
+        return;
+    }
+
     dss->callback(egc, dss, rc);
 }
 
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 2b46121..45deca7 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2462,6 +2462,187 @@ typedef struct libxl__save_helper_state {
                       * marshalling and xc callback functions */
 } libxl__save_helper_state;
 
+/*----- remus device related state structure -----*/
+/* remus device is an abstract layer of remus devices(nic, disk,
+ * etc).It provides the following APIs for libxl:
+ *   >libxl__remus_device_setup
+ *     setup remus devices, like attach qdisc, enable disk buffering, etc
+ *   >libxl__remus_device_teardown
+ *     teardown devices
+ *   >libxl__remus_device_postsuspend
+ *   >libxl__remus_device_preresume
+ *   >libxl__remus_device_commit
+ *     above three are for checkpoint.
+ * through remus device layer, the remus execution flow will be like
+ * this:
+ * xl remus -> remus device setup
+ *               |-> remus checkpoint(postsuspend, preresume, commit)
+ *                     ...
+ *                      |-> remus device teardown, failover or abort
+ * the remus device layer provides an interface
+ *   libxl__remus_device_ops
+ * which a remus device must implement. the whole remus structure:
+ *                           |remus|
+ *                              |
+ *                       |remus device|
+ *                              |
+ *               |nic| |drbd disks| |qemu disks| ...
+ * a device(nic, drbd disks, qemu disks, etc) must implement
+ * libxl__remus_device_ops to support remus.
+ */
+
+typedef enum libxl__remus_device_kind {
+    LIBXL__REMUS_DEVICE_NIC,
+    LIBXL__REMUS_DEVICE_DISK,
+} libxl__remus_device_kind;
+
+typedef struct libxl__remus_state libxl__remus_state;
+typedef struct libxl__remus_device libxl__remus_device;
+typedef struct libxl__remus_device_state libxl__remus_device_state;
+typedef struct libxl__remus_device_ops libxl__remus_device_ops;
+
+struct libxl__remus_device_ops {
+    /*
+     * init() and destroy() APIs are produced by a device type and
+     * consumed by the main remus code, a device type must implement
+     * these two APIs.
+     */
+    /* init device ops private data, etc. must implement */
+    int (*init)(libxl__remus_device_ops *self,
+                libxl__remus_state *rs);
+    /* free device ops private data, etc. must implement */
+    void (*destroy)(libxl__remus_device_ops *self);
+    /*
+     * This is device ops's private data, for different device types,
+     * the data structs are different
+     */
+    void *data;
+
+    /*
+     * checkpoint callbacks, these are async ops, call dev->callback
+     * when done. These function pointers may be NULL, means the op is
+     * not implemented, and it will do nothing when checkpoint.
+     * The callers of these APIs must check the function pointer first.
+     * These callbacks can be implemented synchronously, call
+     * dev->callback at last directly.
+     */
+    void (*postsuspend)(libxl__remus_device *dev);
+    void (*preresume)(libxl__remus_device *dev);
+    void (*commit)(libxl__remus_device *dev);
+
+    /*
+     * This API determines whether the ops matchs the specific device. In the
+     * implementation, we first init all device ops, for example, NIC ops,
+     * DRBD ops ... Then we will find out the libxl devices, and match the
+     * device with the ops, if the device is a drbd disk, then it will be
+     * matched with DRBD ops, and the further ops(such as checkpoint ops etc.)
+     * of this device will using DRBD ops. This API is mainly for disks,
+     * because we must use an external script to determine whether a
+     * libxl_disk is a DRBD disk. a device type must implement this API.
+     * It's an async op and must be implemented asynchronously,
+     * call dev->callback when done.
+     */
+    void (*match)(libxl__remus_device_ops *self,
+                  libxl__remus_device *dev);
+
+    /*
+     * setup() and teardown() are refer to the actual remus device,
+     * a device type must implement these two APIs. They are async
+     * ops, and call dev->callback when done.
+     * These callbacks can be implemented synchronously, call
+     * dev->callback at last directly.
+     */
+    /* setup the remus device */
+    void (*setup)(libxl__remus_device *dev);
+
+    /* teardown the remus device */
+    void (*teardown)(libxl__remus_device *dev);
+};
+
+/*
+ * This structure is for remus device layer, it records remus devices
+ * that have been setuped.
+ */
+struct libxl__remus_device_state {
+    libxl__ao *ao;
+    libxl__egc *egc;
+
+    /* devices that have been setuped */
+    libxl__remus_device **dev;
+
+    int num_nics;
+    int num_disks;
+
+    /* for counting devices that have been handled */
+    int num_devices;
+    /* for counting devices that matched and setuped */
+    int num_setuped;
+};
+
+typedef void libxl__remus_device_callback(libxl__egc *,
+                                          libxl__remus_device *,
+                                          int rc);
+/*
+ * This structure is init and setup by remus device abstruct layer,
+ * and pass to remus device ops
+ */
+struct libxl__remus_device {
+    /* set by remus device abstruct layer */
+    int devid;
+    /* libxl__device_* which this remus device related to */
+    const void *backend_dev;
+    libxl__remus_device_kind kind;
+    /*
+     * This is for matching, we must go through all device ops until we
+     * find a matched op for the device. The ops_index record which ops
+     * we are matching.
+     */
+    int ops_index;
+    libxl__remus_device_ops *ops;
+    libxl__remus_device_callback *callback;
+    libxl__remus_device_state *rds;
+
+    /* used by remus device implementation */
+    /* *kind* of device's private data */
+    void *data;
+    /* for calling scripts, eg. setup|teardown|match scripts */
+    libxl__async_exec_state aes;
+    /*
+     * for async func calls, in the implenmentation of device ops, we
+     * may use fork to do async ops. this is owned by device-specific
+     * ops methods
+     */
+    libxl__ev_child child;
+};
+
+typedef void libxl__remus_callback(libxl__egc *,
+                                   libxl__remus_state *, int rc);
+
+struct libxl__remus_state {
+    /* must set by caller of libxl__remus_device_(setup|teardown) */
+    libxl__ao *ao;
+    uint32_t domid;
+    libxl__remus_callback *callback;
+
+    /* private */
+    int saved_rc;
+    /* context containing device related stuff */
+    libxl__remus_device_state dev_state;
+
+    libxl__ev_time timeout; /* used for checkpoint */
+};
+
+/* the following 5 APIs are async ops, call rs->callback when done */
+_hidden void libxl__remus_device_setup(libxl__egc *egc,
+                                       libxl__remus_state *rs);
+_hidden void libxl__remus_device_teardown(libxl__egc *egc,
+                                          libxl__remus_state *rs);
+_hidden void libxl__remus_device_postsuspend(libxl__egc *egc,
+                                             libxl__remus_state *rs);
+_hidden void libxl__remus_device_preresume(libxl__egc *egc,
+                                           libxl__remus_state *rs);
+_hidden void libxl__remus_device_commit(libxl__egc *egc,
+                                        libxl__remus_state *rs);
 _hidden int libxl__netbuffer_enabled(libxl__gc *gc);
 
 /*----- Domain suspend (save) state structure -----*/
@@ -2492,6 +2673,7 @@ struct libxl__domain_suspend_state {
     int live;
     int debug;
     const libxl_domain_remus_info *remus;
+    libxl__remus_state rs;
     /* private */
     libxl__ev_evtchn guest_evtchn;
     int guest_evtchn_lockfd;
diff --git a/tools/libxl/libxl_remus_device.c b/tools/libxl/libxl_remus_device.c
new file mode 100644
index 0000000..ecea2d2
--- /dev/null
+++ b/tools/libxl/libxl_remus_device.c
@@ -0,0 +1,313 @@
+/*
+ * Copyright (C) 2014
+ * Author: Lai Jiangshan <laijs@xxxxxxxxxxxxxx>
+ *         Yang Hongyang <yanghy@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+
+static libxl__remus_device_ops *dev_ops[] = {
+};
+
+static void device_common_cb(libxl__egc *egc,
+                             libxl__remus_device *dev,
+                             int rc)
+{
+    /* Convenience aliases */
+    libxl__remus_device_state *const rds = dev->rds;
+    libxl__remus_state *const rs = CONTAINER_OF(rds, *rs, dev_state);
+
+    STATE_AO_GC(rs->ao);
+
+    rds->num_devices++;
+
+    if (rc)
+        rs->saved_rc = ERROR_FAIL;
+
+    if (rds->num_devices == rds->num_setuped)
+        rs->callback(egc, rs, rs->saved_rc);
+}
+
+void libxl__remus_device_postsuspend(libxl__egc *egc, libxl__remus_state *rs)
+{
+    int i;
+    libxl__remus_device *dev;
+    STATE_AO_GC(rs->ao);
+
+    /* Convenience aliases */
+    libxl__remus_device_state *const rds = &rs->dev_state;
+
+    rds->num_devices = 0;
+    rs->saved_rc = 0;
+    for (i = 0; i < rds->num_setuped; i++) {
+        dev = rds->dev[i];
+        dev->callback = device_common_cb;
+        if (dev->ops->postsuspend) {
+            dev->ops->postsuspend(dev);
+        } else {
+            rds->num_devices++;
+            if (rds->num_devices == rds->num_setuped)
+                rs->callback(egc, rs, rs->saved_rc);
+        }
+    }
+}
+
+void libxl__remus_device_preresume(libxl__egc *egc, libxl__remus_state *rs)
+{
+    int i;
+    libxl__remus_device *dev;
+    STATE_AO_GC(rs->ao);
+
+    /* Convenience aliases */
+    libxl__remus_device_state *const rds = &rs->dev_state;
+
+    rds->num_devices = 0;
+    rs->saved_rc = 0;
+    for (i = 0; i < rds->num_setuped; i++) {
+        dev = rds->dev[i];
+        dev->callback = device_common_cb;
+        if (dev->ops->preresume) {
+            dev->ops->preresume(dev);
+        } else {
+            rds->num_devices++;
+            if (rds->num_devices == rds->num_setuped)
+                rs->callback(egc, rs, rs->saved_rc);
+        }
+    }
+}
+
+void libxl__remus_device_commit(libxl__egc *egc, libxl__remus_state *rs)
+{
+    int i;
+    libxl__remus_device *dev;
+    STATE_AO_GC(rs->ao);
+
+    /*
+     * REMUS TODO: Wait for disk and explicit memory ack (through restore
+     * callback from remote) before releasing network buffer.
+     */
+    /* Convenience aliases */
+    libxl__remus_device_state *const rds = &rs->dev_state;
+
+    rds->num_devices = 0;
+    rs->saved_rc = 0;
+    for (i = 0; i < rds->num_setuped; i++) {
+        dev = rds->dev[i];
+        dev->callback = device_common_cb;
+        if (dev->ops->commit) {
+            dev->ops->commit(dev);
+        } else {
+            rds->num_devices++;
+            if (rds->num_devices == rds->num_setuped)
+                rs->callback(egc, rs, rs->saved_rc);
+        }
+    }
+}
+
+static void device_setup_cb(libxl__egc *egc,
+                            libxl__remus_device *dev,
+                            int rc)
+{
+    /* Convenience aliases */
+    libxl__remus_device_state *const rds = dev->rds;
+    libxl__remus_state *const rs = CONTAINER_OF(rds, *rs, dev_state);
+
+    STATE_AO_GC(rs->ao);
+
+    rds->num_devices++;
+    /*
+     * we add devices that have been setuped to the array no matter
+     * the setup process succeed or failed because we need to ensure
+     * the device been teardown while setup failed. If any of the
+     * device setup failed, we will quit remus, but before we exit,
+     * we will teardown the devices that have been added to **dev
+     */
+    rds->dev[rds->num_setuped++] = dev;
+    if (rc) {
+        /* setup failed */
+        rs->saved_rc = ERROR_FAIL;
+    }
+
+    if (rds->num_devices == (rds->num_nics + rds->num_disks))
+        rs->callback(egc, rs, rs->saved_rc);
+}
+
+static void device_match_cb(libxl__egc *egc,
+                            libxl__remus_device *dev,
+                            int rc)
+{
+    libxl__remus_device_state *const rds = dev->rds;
+    libxl__remus_state *rs = CONTAINER_OF(rds, *rs, dev_state);
+
+    STATE_AO_GC(rs->ao);
+
+    if (rc) {
+        if (++dev->ops_index >= ARRAY_SIZE(dev_ops) ||
+            rc != ERROR_NOT_MATCH) {
+            /* the device can not be matched */
+            rds->num_devices++;
+            rs->saved_rc = ERROR_FAIL;
+            if (rds->num_devices == (rds->num_nics + rds->num_disks))
+                rs->callback(egc, rs, rs->saved_rc);
+            return;
+        }
+        /* the ops does not match, try next ops */
+        dev->ops = dev_ops[dev->ops_index];
+        dev->ops->match(dev->ops, dev);
+    } else {
+        /* the ops matched, setup the device */
+        dev->callback = device_setup_cb;
+        dev->ops->setup(dev);
+    }
+}
+
+static void device_teardown_cb(libxl__egc *egc,
+                               libxl__remus_device *dev,
+                               int rc)
+{
+    int i;
+    libxl__remus_device_ops *ops;
+    libxl__remus_device_state *const rds = dev->rds;
+    libxl__remus_state *rs = CONTAINER_OF(rds, *rs, dev_state);
+
+    STATE_AO_GC(rs->ao);
+
+    /* ignore teardown errors to teardown as many devs as possible*/
+    rds->num_setuped--;
+
+    if (rds->num_setuped == 0) {
+        /* clean device ops */
+        for (i = 0; i < ARRAY_SIZE(dev_ops); i++) {
+            ops = dev_ops[i];
+            ops->destroy(ops);
+        }
+        rs->callback(egc, rs, rs->saved_rc);
+    }
+}
+
+static __attribute__((unused)) void libxl__remus_device_init(libxl__egc *egc,
+                                     libxl__remus_device_state *rds,
+                                     libxl__remus_device_kind kind,
+                                     void *libxl_dev)
+{
+    libxl__remus_device *dev = NULL;
+    libxl_device_nic *nic = NULL;
+    libxl_device_disk *disk = NULL;
+
+    STATE_AO_GC(rds->ao);
+    GCNEW(dev);
+    dev->ops_index = 0; /* we will match the ops later */
+    dev->backend_dev = libxl_dev;
+    dev->kind = kind;
+    dev->rds = rds;
+
+    switch (kind) {
+        case LIBXL__REMUS_DEVICE_NIC:
+            nic = libxl_dev;
+            dev->devid = nic->devid;
+            break;
+        case LIBXL__REMUS_DEVICE_DISK:
+            disk = libxl_dev;
+            /* there are no dev id for disk devices */
+            dev->devid = -1;
+            break;
+        default:
+            return;
+    }
+
+    libxl__async_exec_init(&dev->aes);
+    libxl__ev_child_init(&dev->child);
+
+    /* match the ops begin */
+    dev->callback = device_match_cb;
+    dev->ops = dev_ops[dev->ops_index];
+    dev->ops->match(dev->ops, dev);
+}
+
+void libxl__remus_device_setup(libxl__egc *egc, libxl__remus_state *rs)
+{
+    int i;
+    libxl__remus_device_ops *ops;
+
+    /* Convenience aliases */
+    libxl__remus_device_state *const rds = &rs->dev_state;
+
+    STATE_AO_GC(rs->ao);
+
+    if (ARRAY_SIZE(dev_ops) == 0)
+        goto out;
+
+    for (i = 0; i < ARRAY_SIZE(dev_ops); i++) {
+        ops = dev_ops[i];
+        if (ops->init(ops, rs)) {
+            rs->saved_rc = ERROR_FAIL;
+            goto out;
+        }
+    }
+
+    rds->ao = rs->ao;
+    rds->egc = egc;
+    rds->num_devices = 0;
+    rds->num_nics = 0;
+    rds->num_disks = 0;
+
+    /* TBD: Remus setup - i.e. attach qdisc, enable disk buffering, etc */
+
+    GCNEW_ARRAY(rds->dev, rds->num_nics + rds->num_disks);
+
+    /* TBD: CALL libxl__remus_device_init to init remus devices */
+
+    if (rds->num_nics == 0 && rds->num_disks == 0)
+        goto out;
+
+    return;
+
+out:
+    rs->callback(egc, rs, rs->saved_rc);
+    return;
+}
+
+void libxl__remus_device_teardown(libxl__egc *egc, libxl__remus_state *rs)
+{
+    int i;
+    libxl__remus_device *dev;
+    libxl__remus_device_ops *ops;
+
+    STATE_AO_GC(rs->ao);
+
+    /* Convenience aliases */
+    libxl__remus_device_state *const rds = &rs->dev_state;
+
+    if (rds->num_setuped == 0) {
+        /* clean device ops */
+        for (i = 0; i < ARRAY_SIZE(dev_ops); i++) {
+            ops = dev_ops[i];
+            ops->destroy(ops);
+        }
+        goto out;
+    }
+
+    for (i = 0; i < rds->num_setuped; i++) {
+        dev = rds->dev[i];
+        dev->callback = device_teardown_cb;
+        dev->ops->teardown(dev);
+    }
+
+    return;
+
+out:
+    rs->callback(egc, rs, rs->saved_rc);
+    return;
+}
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 52f1aa9..4278a6b 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -43,6 +43,7 @@ libxl_error = Enumeration("error", [
     (-12, "OSEVENT_REG_FAIL"),
     (-13, "BUFFERFULL"),
     (-14, "UNKNOWN_CHILD"),
+    (-15, "NOT_MATCH"),
     ], value_namespace = "")
 
 libxl_domain_type = Enumeration("domain_type", [
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.