[Xen-devel] [PATCH v8 09/13] libxl/xl: push VCPU affinity pinning down to libxl

[Dario Faggioli <dario.faggioli@xxxxxxxxxx>]

From: Wei Liu <wei.liu2@xxxxxxxxxx>

This patch introduces an array of libxl_bitmap called "vcpu_hard_affinity"
in libxl IDL to preserve VCPU to PCPU mapping. This is necessary for libxl
to preserve all information to construct a domain.

Also define LIBXL_HAVE_AFFINITY_LIST in libxl.h to mark the change in
API.

This patch was originally part of Wei's series about pushing as much
information as possible on domain configuration in libxl, rather than
xl. See here, for more details:
  http://lists.xen.org/archives/html/xen-devel/2014-06/msg01026.html
  http://lists.xen.org/archives/html/xen-devel/2014-06/msg01031.html

Signed-off-by: Wei Liu <wei.liu2@xxxxxxxxxx>
Signed-off-by: Dario Faggioli <dario.faggioli@xxxxxxxxxx>>
---
Changes since v7:
 This patch is new in the series, and it is coming from Wei's series
 about pushing domain config information down to libxl. It is being
 incorporated in this series to reduce as much as possible the
 inter-dependencies between the two patch series, i.e., for ease
 of development and review.
---
 tools/libxl/libxl.h         |   15 ++++++++++
 tools/libxl/libxl_dom.c     |   14 +++++++++
 tools/libxl/libxl_types.idl |    1 +
 tools/libxl/xl_cmdimpl.c    |   65 ++++++++++++-------------------------------
 4 files changed, 48 insertions(+), 47 deletions(-)

diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index c2b143b..663abe2 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -338,6 +338,21 @@
 #endif
 
 /*
+ * LIBXL_HAVE_BUILDINFO_VCPU_HARD_AFFINITY_ARRAY
+ *
+ * If this is defined, then libxl_domain_build_info structure will
+ * contain vcpu_hard_affinity, an array of libxl_bitmap that contains
+ * the necessary information to set the hard affinity of each VCPU to
+ * a set of PCPUs. Libxl will try to pin VCPUs to PCPUs according to
+ * this list.
+ *
+ * The number of libxl_bitmap in the array equals to the maximum number
+ * of VCPUs. The size of each bitmap is computed basing on the maximum
+ * number of PCPUs.
+ */
+#define LIBXL_HAVE_BUILDINFO_VCPU_HARD_AFFINITY_ARRAY 1
+
+/*
  * LIBXL_HAVE_BUILDINFO_USBDEVICE_LIST
  *
  * If this is defined, then the libxl_domain_build_info structure will
diff --git a/tools/libxl/libxl_dom.c b/tools/libxl/libxl_dom.c
index a90a8d5..1767659 100644
--- a/tools/libxl/libxl_dom.c
+++ b/tools/libxl/libxl_dom.c
@@ -264,6 +264,20 @@ int libxl__build_pre(libxl__gc *gc, uint32_t domid,
     libxl_set_vcpuaffinity_all(ctx, domid, info->max_vcpus,
                                &info->cpumap, NULL);
 
+    /* If we have the vcpu hard affinity list, honour it */
+    if (d_config->b_info.num_vcpu_hard_affinity) {
+        int i;
+
+        for (i = 0; i < d_config->b_info.num_vcpu_hard_affinity; i++) {
+            if (libxl_set_vcpuaffinity(ctx, domid, i,
+                                       &d_config->b_info.vcpu_hard_affinity[i],
+                                       NULL)) {
+                LOG(ERROR, "setting affinity failed on vcpu `%d'", i);
+                return ERROR_FAIL;
+            }
+        }
+    }
+
     if (xc_domain_setmaxmem(ctx->xch, domid, info->target_memkb +
         LIBXL_MAXMEM_CONSTANT) < 0) {
         LIBXL__LOG_ERRNO(ctx, LIBXL__LOG_ERROR, "Couldn't set max memory");
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index 2da58e2..05978d7 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -299,6 +299,7 @@ libxl_domain_build_info = Struct("domain_build_info",[
     ("avail_vcpus",     libxl_bitmap),
     ("cpumap",          libxl_bitmap),
     ("nodemap",         libxl_bitmap),
+    ("vcpu_hard_affinity", Array(libxl_bitmap, "num_vcpu_hard_affinity")),
     ("numa_placement",  libxl_defbool),
     ("tsc_mode",        libxl_tsc_mode),
     ("max_memkb",       MemKB),
diff --git a/tools/libxl/xl_cmdimpl.c b/tools/libxl/xl_cmdimpl.c
index 516a4d7..ac603c8 100644
--- a/tools/libxl/xl_cmdimpl.c
+++ b/tools/libxl/xl_cmdimpl.c
@@ -88,9 +88,6 @@ xlchild children[child_max];
 static const char *common_domname;
 static int fd_lock = -1;
 
-/* Stash for specific vcpu to pcpu mappping */
-static int *vcpu_to_pcpu;
-
 static const char savefileheader_magic[32]=
     "Xen saved domain, xl format\n \0 \r";
 
@@ -825,6 +822,7 @@ static void parse_config_data(const char *config_source,
         b_info->max_vcpus = l;
 
     if (!xlu_cfg_get_list (config, "cpus", &cpus, 0, 1)) {
+        b_info->num_vcpu_hard_affinity = b_info->max_vcpus;
         int n_cpus = 0;
 
         if (libxl_cpu_bitmap_alloc(ctx, &b_info->cpumap, 0)) {
@@ -832,21 +830,19 @@ static void parse_config_data(const char *config_source,
             exit(1);
         }
 
-        /* Prepare the array for single vcpu to pcpu mappings */
-        vcpu_to_pcpu = xmalloc(sizeof(int) * b_info->max_vcpus);
-        memset(vcpu_to_pcpu, -1, sizeof(int) * b_info->max_vcpus);
+        b_info->vcpu_hard_affinity =
+            xmalloc(b_info->num_vcpu_hard_affinity * sizeof(libxl_bitmap));
+
+        for (i = 0; i < b_info->num_vcpu_hard_affinity; i++) {
+            libxl_bitmap_init(&b_info->vcpu_hard_affinity[i]);
+            if (libxl_cpu_bitmap_alloc(ctx,
+                                       &b_info->vcpu_hard_affinity[i], 0)) {
+                fprintf(stderr, "Unable to allocate cpumap for vcpu %d\n", i);
+                exit(1);
+            }
+            libxl_bitmap_set_any(&b_info->vcpu_hard_affinity[i]);
+        }
 
-        /*
-         * Idea here is to let libxl think all the domain's vcpus
-         * have cpu affinity with all the pcpus on the list.
-         * It is then us, here in xl, that matches each single vcpu
-         * to its pcpu (and that's why we need to stash such info in
-         * the vcpu_to_pcpu array now) after the domain has been created.
-         * Doing it like this saves the burden of passing to libxl
-         * some big array hosting the single mappings. Also, using
-         * the cpumap derived from the list ensures memory is being
-         * allocated on the proper nodes anyway.
-         */
         libxl_bitmap_set_none(&b_info->cpumap);
         while ((buf = xlu_cfg_get_listitem(cpus, n_cpus)) != NULL) {
             i = atoi(buf);
@@ -855,12 +851,14 @@ static void parse_config_data(const char *config_source,
                 exit(1);
             }
             libxl_bitmap_set(&b_info->cpumap, i);
-            if (n_cpus < b_info->max_vcpus)
-                vcpu_to_pcpu[n_cpus] = i;
+            if (n_cpus < b_info->max_vcpus) {
+                libxl_bitmap_set_none(&b_info->vcpu_hard_affinity[n_cpus]);
+                libxl_bitmap_set(&b_info->vcpu_hard_affinity[n_cpus], i);
+            }
             n_cpus++;
         }
 
-        /* We have a cpumap, disable automatic placement */
+        /* We have a list of cpumaps, disable automatic placement */
         libxl_defbool_set(&b_info->numa_placement, false);
     }
     else if (!xlu_cfg_get_string (config, "cpus", &buf, 0)) {
@@ -2217,33 +2215,6 @@ start:
     if ( ret )
         goto error_out;
 
-    /* If single vcpu to pcpu mapping was requested, honour it */
-    if (vcpu_to_pcpu) {
-        libxl_bitmap vcpu_cpumap;
-
-        ret = libxl_cpu_bitmap_alloc(ctx, &vcpu_cpumap, 0);
-        if (ret)
-            goto error_out;
-        for (i = 0; i < d_config.b_info.max_vcpus; i++) {
-
-            if (vcpu_to_pcpu[i] != -1) {
-                libxl_bitmap_set_none(&vcpu_cpumap);
-                libxl_bitmap_set(&vcpu_cpumap, vcpu_to_pcpu[i]);
-            } else {
-                libxl_bitmap_set_any(&vcpu_cpumap);
-            }
-            if (libxl_set_vcpuaffinity(ctx, domid, i, &vcpu_cpumap, NULL)) {
-                fprintf(stderr, "setting affinity failed on vcpu `%d'.\n", i);
-                libxl_bitmap_dispose(&vcpu_cpumap);
-                free(vcpu_to_pcpu);
-                ret = ERROR_FAIL;
-                goto error_out;
-            }
-        }
-        libxl_bitmap_dispose(&vcpu_cpumap);
-        free(vcpu_to_pcpu); vcpu_to_pcpu = NULL;
-    }
-
     ret = libxl_userdata_store(ctx, domid, "xl",
                                     config_data, config_len);
     if (ret) {


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel