[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [Query] Flow of PCI device dedicated to a domU






On Tue, Jul 22, 2014 at 4:03 PM, Andrew Cooper <andrew.cooper3@xxxxxxxxxx> wrote:
On 22/07/14 11:13, Xenbegn developer wrote:



On Tue, Jul 22, 2014 at 3:26 PM, Andrew Cooper <andrew.cooper3@xxxxxxxxxx> wrote:
On 22/07/14 10:50, Xenbegn developer wrote:



On Wed, Jul 16, 2014 at 3:20 PM, Andrew Cooper <andrew.cooper3@xxxxxxxxxx> wrote:
On 16/07/14 07:12, Xenbegn developer wrote:
Hi,
I am trying to understand the flow of how a PCI device driver in domU works after a PCI device is is assigned to a domU.

a) If a PCI device is assigned to a domU, this device has to be on a PCI bus. So as per my view xen would have to somehow provide a PCI Controller on which this device is attached.
=> Is my assumption correct ? If yes how it is done, No then also How enumeration of this device happens in domU kernel

No.

PV guests have no PCI root ports/bridges; they use devices as single entities knowing that Xen/dom0 takes care of the other bits. HVM guests have their PCI devices attached to the virtual southbridge which is all emulated by Qemu.



b) Is the Configuration space of the PCI device directly accessible to the domU (assuming the kernel accesses it using memory map) ? If not then it is trapped by xen

All configuration space is trap+emulate in Xen, although almost all operations permitted.



c) Who assigns the MSI (addr + value) in the PCI device. If Xen then how Xen does a translation from Physical MSI to guest MSI (where in code)

Xen controls all interrupts on the system, which is why it needs to trap all config accesses to notice when a domain is attempting to change the interrupt information. In that case, Xen fixes up its delivery of interrupts to the guest, but leaves the underlying interrupt information intact.

~Andrew

Linux kernel pci code has a function called __write_msi_msg. This method writes to config space for MSI/MSIX
pci_write_config_dword(dev, pos + PCI_MSI_ADDRESS_LO,
ÂÂÂ ÂÂÂ ÂÂÂ ÂÂÂ ÂÂÂÂÂÂ msg->address_lo);

Now as per (b) and (c) it has to be trapped in xen. But in x86/traps.c (guest_io_write) I dont see any MSI handling.
Can you please explain (point to the code) where domain is attempting to change the interrupt information.
ÂÂÂ


PV guests are expected to use PHYSOP hypercalls for interrupt management. Xen does not provide transparent emulation support for them.

HVM guests do get transparent emulation support, as from the point of view of an HVM guest, they are talking to a real PCI device.

Can you please point to a device driver code which is calling PHYSOP calls for setting an MSI Addr + MSI number

No. Partly because I don't know exactly, and mainly because this is something you should trivially be able to search for.

It is not that trivial. Can anoyone from Citrix reply ?
~Andrew

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.