|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v4 00/16] Xen VMware tools support
Changes v3 to v4:
Ian Campbell:
Report on both viridian and vmware_hw set.
Added LIBXL_VGA_INTERFACE_TYPE_VMWARE (vga=vmware).
Andrew Cooper:
Add doc for hypervisor-cpuid.
Boris Ostrovsky:
Changing regs->error_code may not be a good idea.
Dropped this.
Jan Beulich & Boris Ostrovsky:
Only enable vmwxit for GP when vmware_port is set.
Done.
Changes v2 to v3:
Add optional unit test tools.
Re-worked split of changes.
Jan Beulich:
for #0:
I don't think you should be adding a new fine in hvm/ _and_ a new
subdirectory.
Moved all files to hvm/vmware that contain code.
for old #1 (now #1 & #2):
Is there really a point in enabling both Viridian and VMware extensions?
I still think so.
hvmloader change: This needs an explanation
Dropped as not need now.
Can you make vmware_hw similar to Viridian, returning success when
setting the value to what it already is.
Done.
You don't seem to be using sub_idx: ...
Dropped.
Extra changes...
Dropped.
for old #2 (now #3):
... these guards have the (theoretical at this point) risk of clashing
... the patch is obviously incomplete without this header...
Did not fix any of these issues. I will stick with this needs
to be a 2nd patch that changes the include files to better fit
in Xen coding. For now these files are in a sub directory
which is not part of the normal include search.
Moved the includeCheck.h file into this patch.
for old #3 (now #4, #5, #6, #7, #8, #9, #10, #11)
As I think was said on v1 already - this should be split into smaller
pieces ...
Done.
All this would very likely better go into a separate function placed in
vmport.c.
Moved most of the code into vmport.c or vmport_rpc.c.
In any event I'm rather uncomfortable about vmware_port getting
enabled unconditionally, ...
Added vmware_port (done in new patches #4, #5) as an xl.cfg
option.
You'll have to go through and fix coding style issues.
I think I have found all these, but since they do not stand out
for me, let me know of any left.
"MAKE_INSTR(IN," name is ambiguous.
Added all 4 opcodes for in and out that can access this port: INB_DX,
INL_DX, OUTB_DX, OUTL_DX.
A VMX-specific function shouldn't be named this way...
Added new common routine vmport_gp_check() that is called from
both vmx.c and svm.c which is where all the logic about checking
for IN ans OUT is done.
Also fixed naming and added static.
Ah, here we go (as to using HVM_DBG_LOG()): Isn't this _way_ too
fine grained?
I have reduced the number of bits used. Partialy by switching
some to xentrace (new patch #6 and #7).
Right, and zero is an indication that it wasn't found. Also I just
noticed there's a gdprintk() in that event, which for all other ...
Made the gdprintk() optional.
End of v3 changes.
This is a small part of the changes needed to allow running Linux
and windows (and others) guests that were built on VMware and run
run them unchanged on Xen.
This small part is the start of Xen support of VMware backdoor I/O
port which is how VMware tools (a standard addition installed on a
guest) communicates to the hypervisor.
I picked this subset to start with because it only has changes in
Xen.
Some of this code is already in QEMU and so KVM has some of this
already. QEMU supported backdoor commands include VMware mouse
support. A later patch set exists that links these changes, new
code and Xen changes to QEMU to provide VMware mouse support under
Xen. The important part is that VMware mouse is an absolute
position mouse and so network delays do not effect usage of the
virtual mouse.
For example from the guest:
[root@C63-min-tools ~]# vmtoolsd --cmd "info-get guestinfo.joejoel"
No value found
[root@C63-min-tools ~]# vmtoolsd --cmd "info-set guestinfo.joejoel short"
[root@C63-min-tools ~]# vmtoolsd --cmd "info-get guestinfo.joejoel"
short
[root@C63-min-tools ~]# vmtoolsd --cmd "info-set guestinfo.joejoel
long222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222222200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000joel"
[root@C63-min-tools ~]# vmtoolsd --cmd "info-get guestinfo.key1"
data1
[root@C63-min-tools ~]# vmtoolsd --cmd "info-get guestinfo.key2"
No value found
[root@C63-min-tools ~]# vmtoolsd --cmd "info-get guestinfo.key2"
data2
[root@C63-min-tools ~]#
Most of this code has been reverse engineered by looking at
source code for Linux and open VMware tools.
http://open-vm-tools.sourceforge.net
changes RFC to v2:
Jan Beulich:
Add xen/arch/x86/hvm/vmware.c for cpuid_vmware_leaves
Fewer patches
Andrew Cooper:
use the proper constant for apic_khz
Follow 839b966e3f587bbb1a0d954230fb3904330dccb6 style changes.
Changed HVM_PARAM_VMWARE_HW to write once (make is_vmware_domain()
more static).
Dropped vmport status stuff.
Added checks for xzalloc() having failed.
You should include backdoor_def.h ...
Every thing I tried did not work better. So I did not
change VMPORT_PORT and BDOOR_PORT being the same value.
I did not try and adjust VMware's include file backdoor_def.h
to working in other xen source files.
Switching to s_time_t is not valid. get_sec() is defined:
unsigned long get_sec(void);
and so my uses of it should be using unsigned long. However
since that is not a fixed width type, I used the uint64_t
data type which is almost the same, but does allow the 32 bit
build of libxc, libxl to do the correct thing.
Konrad Rzeszutek Wilk:
Please don't include the address. It should be, etc
about the Vmware provided include files.
I went with no changes to these files. Even if the files should
be changed to match xen coding style, etc I still feel that the
original ones should be added via a patch, and then adjusted in a
2nd patch.
Can you use XenBus?
I would say no. XenBus (and XenStore) is about domain to domain
communication. This is about VMware's hyper-call and providing
access to VMware's guest info very low speed access.
Olaf Hering:
Dropped changing of bios-strings. Still needs some documentation
about this may be needed to do in a tool stack or set of commands.
Boris Ostrovsky:
Use svm_nextrip_insn_length()
Looks like __get_instruction_length() does this, so switched to
__get_instruction_length().
RFC:
See
http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1009458
for info on detecting VMware.
Linux does not follow this exactly. It checks for CPUID 1st. If
that fails, it checks for SMBIOS containing "VMware" (not VMware- or
VMW).
So this patch set provides:
SMBIOS -- Add string VMware-
CPUID -- Add VMware's CPUID (Note: currently HyperV (viridian support)
breaks this check.)
Add the magic VMware port
Allow VMware tools poweroff and reboot
Enable access to VMware's guest info
Provide the VMware tools build number
Don Slutz (16):
xen: Add support for VMware cpuid leaves
tools: Add vmware_hw support
vmware: Add VMware provided include files.
xen: Add is_vmware_port_enabled
tools: Add vmware_port support
xen: Convert vmware_port to xentrace usage
tools: Convert vmware_port to xentrace usage
xen: Add limited support of VMware's hyper-call rpc
tools: Add limited support of VMware's hyper-call rpc
Add VMware tool's triggers
Add live migration of VMware's hyper-call RPC
Add dump of HVM_SAVE_CODE(VMPORT) to xen-hvmctx.
Add xen-hvm-param
Add xen-vmware-guestinfo
Add xen-list-vmware-guestinfo
Add xen-hvm-send-trigger
.gitignore | 4 +
docs/man/xl.cfg.pod.5 | 28 +-
docs/misc/hypervisor-cpuid.markdown | 29 +
tools/libxc/xc_domain.c | 115 ++
tools/libxc/xc_domain_restore.c | 14 +
tools/libxc/xc_domain_save.c | 11 +
tools/libxc/xenctrl.h | 24 +
tools/libxc/xg_save_restore.h | 2 +
tools/libxl/libxl.h | 15 +
tools/libxl/libxl_create.c | 6 +-
tools/libxl/libxl_dm.c | 10 +-
tools/libxl/libxl_dom.c | 2 +
tools/libxl/libxl_types.idl | 3 +
tools/libxl/xl_cmdimpl.c | 12 +-
tools/misc/Makefile | 16 +-
tools/misc/xen-hvm-param.c | 164 +++
tools/misc/xen-hvm-send-trigger.c | 103 ++
tools/misc/xen-hvmctx.c | 229 ++++
tools/misc/xen-list-vmware-guestinfo.c | 88 ++
tools/misc/xen-vmware-guestinfo.c | 97 ++
tools/xentrace/formats | 13 +
xen/arch/x86/domain.c | 2 +
xen/arch/x86/domctl.c | 34 +
xen/arch/x86/hvm/Makefile | 3 +-
xen/arch/x86/hvm/hvm.c | 79 ++
xen/arch/x86/hvm/svm/emulate.c | 26 +-
xen/arch/x86/hvm/svm/svm.c | 53 +-
xen/arch/x86/hvm/svm/vmcb.c | 2 +
xen/arch/x86/hvm/vmware/Makefile | 3 +
xen/arch/x86/hvm/vmware/backdoor_def.h | 167 +++
xen/arch/x86/hvm/vmware/cpuid.c | 69 ++
xen/arch/x86/hvm/vmware/guest_msg_def.h | 87 ++
xen/arch/x86/hvm/vmware/includeCheck.h | 17 +
xen/arch/x86/hvm/vmware/vmport.c | 324 ++++++
xen/arch/x86/hvm/vmware/vmport_rpc.c | 1581 ++++++++++++++++++++++++++
xen/arch/x86/hvm/vmx/vmcs.c | 1 +
xen/arch/x86/hvm/vmx/vmx.c | 72 ++
xen/arch/x86/hvm/vmx/vvmx.c | 14 +
xen/arch/x86/traps.c | 8 +-
xen/common/domctl.c | 3 +
xen/include/asm-x86/hvm/domain.h | 7 +
xen/include/asm-x86/hvm/hvm.h | 3 +
xen/include/asm-x86/hvm/io.h | 2 +-
xen/include/asm-x86/hvm/svm/emulate.h | 13 +-
xen/include/asm-x86/hvm/trace.h | 45 +
xen/include/asm-x86/hvm/vmport.h | 72 ++
xen/include/asm-x86/hvm/vmware.h | 31 +
xen/include/public/arch-x86/hvm/save.h | 39 +-
xen/include/public/arch-x86/hvm/vmporttype.h | 118 ++
xen/include/public/domctl.h | 6 +
xen/include/public/hvm/hvm_op.h | 18 +
xen/include/public/hvm/params.h | 8 +-
xen/include/public/trace.h | 12 +
xen/include/xen/sched.h | 3 +
54 files changed, 3884 insertions(+), 23 deletions(-)
create mode 100644 docs/misc/hypervisor-cpuid.markdown
create mode 100644 tools/misc/xen-hvm-param.c
create mode 100644 tools/misc/xen-hvm-send-trigger.c
create mode 100644 tools/misc/xen-list-vmware-guestinfo.c
create mode 100644 tools/misc/xen-vmware-guestinfo.c
create mode 100644 xen/arch/x86/hvm/vmware/Makefile
create mode 100644 xen/arch/x86/hvm/vmware/backdoor_def.h
create mode 100644 xen/arch/x86/hvm/vmware/cpuid.c
create mode 100644 xen/arch/x86/hvm/vmware/guest_msg_def.h
create mode 100644 xen/arch/x86/hvm/vmware/includeCheck.h
create mode 100644 xen/arch/x86/hvm/vmware/vmport.c
create mode 100644 xen/arch/x86/hvm/vmware/vmport_rpc.c
create mode 100644 xen/include/asm-x86/hvm/vmport.h
create mode 100644 xen/include/asm-x86/hvm/vmware.h
create mode 100644 xen/include/public/arch-x86/hvm/vmporttype.h
--
1.8.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |