[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Xen-devel] [PATCH v10 11/20] x86/VPMU: Interface for setting PMU mode and flags
- To: "Tian, Kevin" <kevin.tian@xxxxxxxxx>, "jbeulich@xxxxxxxx" <jbeulich@xxxxxxxx>, "suravee.suthikulpanit@xxxxxxx" <suravee.suthikulpanit@xxxxxxx>, "Dong, Eddie" <eddie.dong@xxxxxxxxx>, "Aravind.Gopalakrishnan@xxxxxxx" <Aravind.Gopalakrishnan@xxxxxxx>
- From: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
- Date: Thu, 18 Sep 2014 17:50:54 -0400
- Cc: "andrew.cooper3@xxxxxxxxxx" <andrew.cooper3@xxxxxxxxxx>, "xen-devel@xxxxxxxxxxxxx" <xen-devel@xxxxxxxxxxxxx>, "keir@xxxxxxx" <keir@xxxxxxx>, "Nakajima, Jun" <jun.nakajima@xxxxxxxxx>, "tim@xxxxxxx" <tim@xxxxxxx>
- Delivery-date: Thu, 18 Sep 2014 21:50:49 +0000
- List-id: Xen developer discussion <xen-devel.lists.xen.org>
On 09/18/2014 12:11 AM, Tian, Kevin wrote:
From: Boris Ostrovsky [mailto:boris.ostrovsky@xxxxxxxxxx]
Sent: Wednesday, September 03, 2014 8:41 PM
Add runtime interface for setting PMU mode and flags. Three main modes are
provided:
* PMU off
* PMU on: Guests can access PMU MSRs and receive PMU interrupts. dom0
profiles itself and the hypervisor.
* dom0-only PMU: dom0 collects samples for both itself and guests.
could you associate above three modes to the actual definitions in the code?
from code only two modes are defined:
Wrong commit message (I kept it from early days of the patch). This
patch only has two modes: "on" (aka" self") and "off". The third mode is
introduced by a later patch.
+/* PMU modes:
+ * - XENPMU_MODE_OFF: No PMU virtualization
+ * - XENPMU_MODE_SELF: Guests can profile themselves, dom0 profiles
+ * itself and Xen
+ */
how do I understand "PMU on" mode then?
"Self" is "on". I'll mention this in the commit message and in the
comments before parsing code
For feature flags only Intel's BTS is currently supported.
Mode and flags are set via HYPERVISOR_xenpmu_op hypercall.
Signed-off-by: Boris Ostrovsky <boris.ostrovsky@xxxxxxxxxx>
Reviewed-by: Dietmar Hahn <dietmar.hahn@xxxxxxxxxxxxxx>
Tested-by: Dietmar Hahn <dietmar.hahn@xxxxxxxxxxxxxx>
---
xen/arch/x86/domain.c | 7 +-
xen/arch/x86/hvm/svm/vpmu.c | 4 +-
xen/arch/x86/hvm/vmx/vpmu_core2.c | 10 +-
xen/arch/x86/hvm/vpmu.c | 214
+++++++++++++++++++++++++++++++++++--
xen/arch/x86/x86_64/compat/entry.S | 4 +
xen/arch/x86/x86_64/entry.S | 4 +
xen/include/Makefile | 2 +
xen/include/asm-x86/hvm/vpmu.h | 27 +++--
xen/include/public/pmu.h | 42 ++++++++
xen/include/public/xen.h | 1 +
xen/include/xen/hypercall.h | 4 +
xen/include/xlat.lst | 4 +
12 files changed, 295 insertions(+), 28 deletions(-)
diff --git a/xen/arch/x86/domain.c b/xen/arch/x86/domain.c
index f7e0e78..64d4a83 100644
--- a/xen/arch/x86/domain.c
+++ b/xen/arch/x86/domain.c
@@ -1499,8 +1499,7 @@ void context_switch(struct vcpu *prev, struct vcpu
*next)
if ( is_hvm_vcpu(prev) )
{
- if (prev != next)
- vpmu_save(prev);
+ vpmu_switch_from(prev, next);
if ( !list_empty(&prev->arch.hvm_vcpu.tm_list) )
pt_save_timer(prev);
@@ -1543,9 +1542,9 @@ void context_switch(struct vcpu *prev, struct vcpu
*next)
!is_hardware_domain(next->domain));
}
- if (is_hvm_vcpu(next) && (prev != next) )
+ if ( is_hvm_vcpu(prev) )
/* Must be done with interrupts enabled */
- vpmu_load(next);
+ vpmu_switch_to(prev, next);
context_saved(prev);
diff --git a/xen/arch/x86/hvm/svm/vpmu.c b/xen/arch/x86/hvm/svm/vpmu.c
index 124b147..37d8228 100644
--- a/xen/arch/x86/hvm/svm/vpmu.c
+++ b/xen/arch/x86/hvm/svm/vpmu.c
@@ -479,14 +479,14 @@ struct arch_vpmu_ops amd_vpmu_ops = {
.arch_vpmu_dump = amd_vpmu_dump
};
-int svm_vpmu_initialise(struct vcpu *v, unsigned int vpmu_flags)
+int svm_vpmu_initialise(struct vcpu *v)
{
struct vpmu_struct *vpmu = vcpu_vpmu(v);
uint8_t family = current_cpu_data.x86;
int ret = 0;
/* vpmu enabled? */
- if ( !vpmu_flags )
+ if ( vpmu_mode == XENPMU_MODE_OFF )
return 0;
switch ( family )
diff --git a/xen/arch/x86/hvm/vmx/vpmu_core2.c
b/xen/arch/x86/hvm/vmx/vpmu_core2.c
index 1cdafe0..f5d85e4 100644
--- a/xen/arch/x86/hvm/vmx/vpmu_core2.c
+++ b/xen/arch/x86/hvm/vmx/vpmu_core2.c
@@ -703,13 +703,13 @@ static int core2_vpmu_do_interrupt(struct
cpu_user_regs *regs)
return 1;
}
-static int core2_vpmu_initialise(struct vcpu *v, unsigned int vpmu_flags)
+static int core2_vpmu_initialise(struct vcpu *v)
{
struct vpmu_struct *vpmu = vcpu_vpmu(v);
u64 msr_content;
static bool_t ds_warned;
- if ( !(vpmu_flags & VPMU_BOOT_BTS) )
+ if ( !(vpmu_features & XENPMU_FEATURE_INTEL_BTS) )
goto func_out;
/* Check the 'Debug Store' feature in the CPUID.EAX[1]:EDX[21] */
while ( boot_cpu_has(X86_FEATURE_DS) )
@@ -824,7 +824,7 @@ struct arch_vpmu_ops core2_no_vpmu_ops = {
.do_cpuid = core2_no_vpmu_do_cpuid,
};
-int vmx_vpmu_initialise(struct vcpu *v, unsigned int vpmu_flags)
+int vmx_vpmu_initialise(struct vcpu *v)
{
struct vpmu_struct *vpmu = vcpu_vpmu(v);
uint8_t family = current_cpu_data.x86;
@@ -832,7 +832,7 @@ int vmx_vpmu_initialise(struct vcpu *v, unsigned int
vpmu_flags)
int ret = 0;
vpmu->arch_vpmu_ops = &core2_no_vpmu_ops;
- if ( !vpmu_flags )
+ if ( vpmu_mode == XENPMU_MODE_OFF )
return 0;
if ( family == 6 )
@@ -875,7 +875,7 @@ int vmx_vpmu_initialise(struct vcpu *v, unsigned int
vpmu_flags)
/* future: */
case 0x3d:
case 0x4e:
- ret = core2_vpmu_initialise(v, vpmu_flags);
+ ret = core2_vpmu_initialise(v);
if ( !ret )
vpmu->arch_vpmu_ops = &core2_vpmu_ops;
return ret;
diff --git a/xen/arch/x86/hvm/vpmu.c b/xen/arch/x86/hvm/vpmu.c
index 89bead4..39d13f6 100644
--- a/xen/arch/x86/hvm/vpmu.c
+++ b/xen/arch/x86/hvm/vpmu.c
@@ -21,6 +21,8 @@
#include <xen/config.h>
#include <xen/sched.h>
#include <xen/xenoprof.h>
+#include <xen/event.h>
+#include <xen/guest_access.h>
#include <asm/regs.h>
#include <asm/types.h>
#include <asm/msr.h>
@@ -32,13 +34,21 @@
#include <asm/hvm/svm/vmcb.h>
#include <asm/apic.h>
#include <public/pmu.h>
+#include <xen/tasklet.h>
+
+#include <compat/pmu.h>
+CHECK_pmu_params;
+CHECK_pmu_intel_ctxt;
+CHECK_pmu_amd_ctxt;
+CHECK_pmu_cntr_pair;
/*
* "vpmu" : vpmu generally enabled
* "vpmu=off" : vpmu generally disabled
* "vpmu=bts" : vpmu enabled and Intel BTS feature switched on.
*/
this comment doesn't describe "self" mode. better to have it consistent
with later param parse.
-static unsigned int __read_mostly opt_vpmu_enabled;
+uint64_t __read_mostly vpmu_mode = XENPMU_MODE_OFF;
+uint64_t __read_mostly vpmu_features = 0;
static void parse_vpmu_param(char *s);
custom_param("vpmu", parse_vpmu_param);
@@ -52,7 +62,7 @@ static void __init parse_vpmu_param(char *s)
break;
default:
if ( !strcmp(s, "bts") )
- opt_vpmu_enabled |= VPMU_BOOT_BTS;
+ vpmu_features |= XENPMU_FEATURE_INTEL_BTS;
else if ( *s )
{
printk("VPMU: unknown flag: %s - vpmu disabled!\n", s);
@@ -60,7 +70,7 @@ static void __init parse_vpmu_param(char *s)
}
/* fall through */
case 1:
- opt_vpmu_enabled |= VPMU_BOOT_ENABLED;
+ vpmu_mode = XENPMU_MODE_SELF;
break;
}
}
@@ -77,6 +87,9 @@ int vpmu_do_wrmsr(unsigned int msr, uint64_t
msr_content, uint64_t supported)
{
struct vpmu_struct *vpmu = vcpu_vpmu(current);
+ if ( !(vpmu_mode & XENPMU_MODE_SELF) )
+ return 0;
+
if ( vpmu->arch_vpmu_ops && vpmu->arch_vpmu_ops->do_wrmsr )
return vpmu->arch_vpmu_ops->do_wrmsr(msr, msr_content,
supported);
return 0;
@@ -86,6 +99,9 @@ int vpmu_do_rdmsr(unsigned int msr, uint64_t
*msr_content)
{
struct vpmu_struct *vpmu = vcpu_vpmu(current);
+ if ( !(vpmu_mode & XENPMU_MODE_SELF) )
+ return 0;
+
if ( vpmu->arch_vpmu_ops && vpmu->arch_vpmu_ops->do_rdmsr )
return vpmu->arch_vpmu_ops->do_rdmsr(msr, msr_content);
return 0;
@@ -240,19 +256,19 @@ void vpmu_initialise(struct vcpu *v)
switch ( vendor )
{
case X86_VENDOR_AMD:
- if ( svm_vpmu_initialise(v, opt_vpmu_enabled) != 0 )
- opt_vpmu_enabled = 0;
+ if ( svm_vpmu_initialise(v) != 0 )
+ vpmu_mode = XENPMU_MODE_OFF;
break;
case X86_VENDOR_INTEL:
- if ( vmx_vpmu_initialise(v, opt_vpmu_enabled) != 0 )
- opt_vpmu_enabled = 0;
+ if ( vmx_vpmu_initialise(v) != 0 )
+ vpmu_mode = XENPMU_MODE_OFF;
break;
default:
printk("VPMU: Initialization failed. "
"Unknown CPU vendor %d\n", vendor);
- opt_vpmu_enabled = 0;
+ vpmu_mode = XENPMU_MODE_OFF;
break;
}
}
@@ -274,3 +290,185 @@ void vpmu_dump(struct vcpu *v)
vpmu->arch_vpmu_ops->arch_vpmu_dump(v);
}
+static atomic_t vpmu_sched_counter;
+
+static void vpmu_sched_checkin(unsigned long unused)
+{
+ atomic_inc(&vpmu_sched_counter);
+}
+
+static int
+vpmu_force_context_switch(XEN_GUEST_HANDLE_PARAM(xen_pmu_params
_t) arg)
looks a tricky implementation...
+{
+ unsigned i, j, allbutself_num, tasknum, mycpu;
+ static s_time_t start;
+ static struct tasklet **sync_task;
+ struct vcpu *curr_vcpu = current;
+ static struct vcpu *sync_vcpu;
+ int ret = 0;
+
+ tasknum = allbutself_num = num_online_cpus() - 1;
+
+ if ( sync_task ) /* if set, we are in hypercall continuation */
+ {
+ if ( (sync_vcpu != NULL) && (sync_vcpu != curr_vcpu) )
+ /* We are not the original caller */
+ return -EAGAIN;
I assume hypercall continuation will happen on original vcpu context. Under
which situation the hypercall will be continued on a different vcpu? If yes,
would it be an unbounded situation where you may wait unexpected time
to have sync_vcpu==curr_vcpu?
The continuation call is gone in v11. If we are stuck waiting for more
than 5 seconds we'll simply return -EAGAIN and have the caller retry.
+ goto cont_wait;
+ }
+
+ sync_task = xmalloc_array(struct tasklet *, allbutself_num);
+ if ( !sync_task )
+ {
+ printk(XENLOG_WARNING "vpmu_force_context_switch: out of
memory\n");
+ return -ENOMEM;
+ }
+
+ for ( tasknum = 0; tasknum < allbutself_num; tasknum++ )
+ {
+ sync_task[tasknum] = xmalloc(struct tasklet);
+ if ( sync_task[tasknum] == NULL )
+ {
+ printk(XENLOG_WARNING "vpmu_force_context_switch: out of
memory\n");
+ ret = -ENOMEM;
+ goto out;
+ }
+ tasklet_init(sync_task[tasknum], vpmu_sched_checkin, 0);
+ }
+
+ atomic_set(&vpmu_sched_counter, 0);
+ sync_vcpu = curr_vcpu;
+
+ j = 0;
+ mycpu = smp_processor_id();
+ for_each_online_cpu( i )
+ {
+ if ( i != mycpu )
+ tasklet_schedule_on_cpu(sync_task[j++], i);
+ }
are you sure tasklet can always cause context switch?
Yes, tasklet is run as result of SCHEDULE_SOFTIRQ.
and how do you ensure
vpmu won't become dirty again if the target vcpu switches out, and then switches
back again to use vpmu, but before your whole hypercall completes? Here some
way is required to really stop vpmu on the target vcpu imho, but I may be wrong
on understanding the whole background here... :-)
I change vpmu_mode *before* calling this sync routine so even if remote
VCPU comes on again it won't load that VCPU's VPMU. That's because the
only time I do this sync is when I:
* Turn VPMU mode off. In which case no VPMU will ever get loaded
* Switch to XENPMU_MODE_ALL mode (in v11 version) in which case the only
time VPMU will get loaded is if it's dom0's VPMU. Which is fine.
+
+ vpmu_save(curr_vcpu);
+
+ start = NOW();
+
+ cont_wait:
+ /*
+ * Note that we may fail here if a CPU is hot-(un)plugged while we are
+ * waiting. We will then time out.
+ */
+ while ( atomic_read(&vpmu_sched_counter) != allbutself_num )
+ {
+ /* Give up after 5 seconds */
+ if ( NOW() > start + SECONDS(5) )
+ {
+ printk(XENLOG_WARNING
+ "vpmu_force_context_switch: failed to sync\n");
+ ret = -EBUSY;
+ break;
+ }
+ cpu_relax();
+ if ( hypercall_preempt_check() )
+ return hypercall_create_continuation(
+ __HYPERVISOR_xenpmu_op, "ih", XENPMU_mode_set,
arg);
+ }
+
+ out:
+
+ for ( i = 0; i < tasknum; i++ )
+ {
+ tasklet_kill(sync_task[i]);
+ xfree(sync_task[i]);
+ }
+ xfree(sync_task);
+ sync_task = NULL;
+ sync_vcpu = NULL;
+
+ return ret;
+}
+
+long do_xenpmu_op(int op,
XEN_GUEST_HANDLE_PARAM(xen_pmu_params_t) arg)
+{
+ int ret = -EINVAL;
+ xen_pmu_params_t pmu_params;
+
+ switch ( op )
+ {
+ case XENPMU_mode_set:
+ {
+ static DEFINE_SPINLOCK(xenpmu_mode_lock);
why not a global lock? should it cover feature_set too?
This lock is not protecting setting the mode but rather it tries to
prevent multiple CPUs doing the sync (tasklet thing) at the same time.
+ uint32_t current_mode;
+
+ if ( !is_control_domain(current->domain) )
+ return -EPERM;
+
+ if ( copy_from_guest(&pmu_params, arg, 1) )
+ return -EFAULT;
+
+ if ( pmu_params.val & ~XENPMU_MODE_SELF )
+ return -EINVAL;
+
+ /*
+ * Return error is someone else is in the middle of changing mode
---
+ * this is most likely indication of two system administrators
+ * working against each other
+ */
+ if ( !spin_trylock(&xenpmu_mode_lock) )
+ return -EAGAIN;
+
+ current_mode = vpmu_mode;
+ vpmu_mode = pmu_params.val;
+
+ if ( vpmu_mode == XENPMU_MODE_OFF )
+ {
+ /*
+ * Make sure all (non-dom0) VCPUs have unloaded their
VPMUs. This
+ * can be achieved by having all physical processors go
through
+ * context_switch().
I didn't see any condition check on 'non-dom0' to reflect above comment...
The comment is not quite correct. I wrote it for XENPMU_MODE_ALL mode,
which is not what I do here. I'll update it.
+ */
+ ret = vpmu_force_context_switch(arg);
+ if ( ret )
+ vpmu_mode = current_mode;
+ }
+ else
+ ret = 0;
+
+ spin_unlock(&xenpmu_mode_lock);
+ break;
+ }
+
+ case XENPMU_mode_get:
+ memset(&pmu_params, 0, sizeof(pmu_params));
+ pmu_params.val = vpmu_mode;
+ pmu_params.version.maj = XENPMU_VER_MAJ;
+ pmu_params.version.min = XENPMU_VER_MIN;
+ if ( copy_to_guest(arg, &pmu_params, 1) )
+ return -EFAULT;
+ ret = 0;
+ break;
+
+ case XENPMU_feature_set:
+ if ( !is_control_domain(current->domain) )
+ return -EPERM;
+
+ if ( copy_from_guest(&pmu_params, arg, 1) )
+ return -EFAULT;
+
+ if ( pmu_params.val & ~XENPMU_FEATURE_INTEL_BTS )
+ return -EINVAL;
+
+ vpmu_features = pmu_params.val;
+
+ ret = 0;
+ break;
+
+ case XENPMU_feature_get:
+ memset(&pmu_params, 0, sizeof(pmu_params));
+ pmu_params.val = vpmu_mode;
+ if ( copy_to_guest(arg, &pmu_params, 1) )
+ return -EFAULT;
+ ret = 0;
+ break;
+ }
+
+ return ret;
+}
diff --git a/xen/arch/x86/x86_64/compat/entry.S
b/xen/arch/x86/x86_64/compat/entry.S
index ac594c9..8587c46 100644
--- a/xen/arch/x86/x86_64/compat/entry.S
+++ b/xen/arch/x86/x86_64/compat/entry.S
@@ -417,6 +417,8 @@ ENTRY(compat_hypercall_table)
.quad do_domctl
.quad compat_kexec_op
.quad do_tmem_op
+ .quad do_ni_hypercall /* reserved for XenClient */
why XenClient here?
See include/public/xen.h, hypercall 39.
-boris
+ .quad do_xenpmu_op /* 40 */
.rept __HYPERVISOR_arch_0-((.-compat_hypercall_table)/8)
.quad compat_ni_hypercall
.endr
@@ -465,6 +467,8 @@ ENTRY(compat_hypercall_args_table)
.byte 1 /* do_domctl */
.byte 2 /* compat_kexec_op */
.byte 1 /* do_tmem_op */
+ .byte 0 /* reserved for XenClient */
+ .byte 2 /* do_xenpmu_op */ /* 40 */
.rept __HYPERVISOR_arch_0-(.-compat_hypercall_args_table)
.byte 0 /* compat_ni_hypercall */
.endr
diff --git a/xen/arch/x86/x86_64/entry.S b/xen/arch/x86/x86_64/entry.S
index a3ed216..704f4d1 100644
--- a/xen/arch/x86/x86_64/entry.S
+++ b/xen/arch/x86/x86_64/entry.S
@@ -762,6 +762,8 @@ ENTRY(hypercall_table)
.quad do_domctl
.quad do_kexec_op
.quad do_tmem_op
+ .quad do_ni_hypercall /* reserved for XenClient */
+ .quad do_xenpmu_op /* 40 */
.rept __HYPERVISOR_arch_0-((.-hypercall_table)/8)
.quad do_ni_hypercall
.endr
@@ -810,6 +812,8 @@ ENTRY(hypercall_args_table)
.byte 1 /* do_domctl */
.byte 2 /* do_kexec */
.byte 1 /* do_tmem_op */
+ .byte 0 /* reserved for XenClient */
+ .byte 2 /* do_xenpmu_op */ /* 40 */
.rept __HYPERVISOR_arch_0-(.-hypercall_args_table)
.byte 0 /* do_ni_hypercall */
.endr
diff --git a/xen/include/Makefile b/xen/include/Makefile
index f7ccbc9..f97733a 100644
--- a/xen/include/Makefile
+++ b/xen/include/Makefile
@@ -26,7 +26,9 @@ headers-y := \
headers-$(CONFIG_X86) += compat/arch-x86/xen-mca.h
headers-$(CONFIG_X86) += compat/arch-x86/xen.h
headers-$(CONFIG_X86) += compat/arch-x86/xen-$(compat-arch-y).h
+headers-$(CONFIG_X86) += compat/arch-x86/pmu.h
headers-y += compat/arch-$(compat-arch-y).h
compat/xlat.h
+headers-y += compat/pmu.h
headers-$(FLASK_ENABLE) += compat/xsm/flask_op.h
cppflags-y := -include public/xen-compat.h
diff --git a/xen/include/asm-x86/hvm/vpmu.h
b/xen/include/asm-x86/hvm/vpmu.h
index 6fa0def..8572835 100644
--- a/xen/include/asm-x86/hvm/vpmu.h
+++ b/xen/include/asm-x86/hvm/vpmu.h
@@ -24,13 +24,6 @@
#include <public/pmu.h>
-/*
- * Flag bits given as a string on the hypervisor boot parameter 'vpmu'.
- * See arch/x86/hvm/vpmu.c.
- */
-#define VPMU_BOOT_ENABLED 0x1 /* vpmu generally enabled. */
-#define VPMU_BOOT_BTS 0x2 /* Intel BTS feature wanted. */
-
#define vcpu_vpmu(vcpu) (&(vcpu)->arch.vpmu)
#define vpmu_vcpu(vpmu) container_of((vpmu), struct vcpu, arch.vpmu)
@@ -59,8 +52,8 @@ struct arch_vpmu_ops {
void (*arch_vpmu_dump)(const struct vcpu *);
};
-int vmx_vpmu_initialise(struct vcpu *, unsigned int flags);
-int svm_vpmu_initialise(struct vcpu *, unsigned int flags);
+int vmx_vpmu_initialise(struct vcpu *);
+int svm_vpmu_initialise(struct vcpu *);
struct vpmu_struct {
u32 flags;
@@ -116,5 +109,21 @@ void vpmu_dump(struct vcpu *v);
extern int acquire_pmu_ownership(int pmu_ownership);
extern void release_pmu_ownership(int pmu_ownership);
+extern uint64_t vpmu_mode;
+extern uint64_t vpmu_features;
+
+/* Context switch */
+inline void vpmu_switch_from(struct vcpu *prev, struct vcpu *next)
+{
+ if ( (prev != next) && (vpmu_mode & XENPMU_MODE_SELF) )
+ vpmu_save(prev);
+}
+
+inline void vpmu_switch_to(struct vcpu *prev, struct vcpu *next)
+{
+ if ( (prev != next) && (vpmu_mode & XENPMU_MODE_SELF) )
+ vpmu_load(next);
+}
+
#endif /* __ASM_X86_HVM_VPMU_H_*/
diff --git a/xen/include/public/pmu.h b/xen/include/public/pmu.h
index e6f45ee..0855005 100644
--- a/xen/include/public/pmu.h
+++ b/xen/include/public/pmu.h
@@ -13,6 +13,48 @@
#define XENPMU_VER_MAJ 0
#define XENPMU_VER_MIN 1
+/*
+ * ` enum neg_errnoval
+ * ` HYPERVISOR_xenpmu_op(enum xenpmu_op cmd, struct xenpmu_params
*args);
+ *
+ * @cmd == XENPMU_* (PMU operation)
+ * @args == struct xenpmu_params
+ */
+/* ` enum xenpmu_op { */
+#define XENPMU_mode_get 0 /* Also used for getting PMU version
*/
+#define XENPMU_mode_set 1
+#define XENPMU_feature_get 2
+#define XENPMU_feature_set 3
+/* ` } */
+
+/* Parameters structure for HYPERVISOR_xenpmu_op call */
+struct xen_pmu_params {
+ /* IN/OUT parameters */
+ struct {
+ uint32_t maj;
+ uint32_t min;
+ } version;
+ uint64_t val;
+
+ /* IN parameters */
+ uint64_t vcpu;
+};
+typedef struct xen_pmu_params xen_pmu_params_t;
+DEFINE_XEN_GUEST_HANDLE(xen_pmu_params_t);
+
+/* PMU modes:
+ * - XENPMU_MODE_OFF: No PMU virtualization
+ * - XENPMU_MODE_SELF: Guests can profile themselves, dom0 profiles
+ * itself and Xen
+ */
+#define XENPMU_MODE_OFF 0
+#define XENPMU_MODE_SELF (1<<0)
+
+/*
+ * PMU features:
+ * - XENPMU_FEATURE_INTEL_BTS: Intel BTS support (ignored on AMD)
+ */
+#define XENPMU_FEATURE_INTEL_BTS 1
/* Shared between hypervisor and PV domain */
struct xen_pmu_data {
diff --git a/xen/include/public/xen.h b/xen/include/public/xen.h
index a6a2092..0766790 100644
--- a/xen/include/public/xen.h
+++ b/xen/include/public/xen.h
@@ -101,6 +101,7 @@ DEFINE_XEN_GUEST_HANDLE(xen_ulong_t);
#define __HYPERVISOR_kexec_op 37
#define __HYPERVISOR_tmem_op 38
#define __HYPERVISOR_xc_reserved_op 39 /* reserved for XenClient
*/
+#define __HYPERVISOR_xenpmu_op 40
/* Architecture-specific hypercall definitions. */
#define __HYPERVISOR_arch_0 48
diff --git a/xen/include/xen/hypercall.h b/xen/include/xen/hypercall.h
index a9e5229..cf34547 100644
--- a/xen/include/xen/hypercall.h
+++ b/xen/include/xen/hypercall.h
@@ -14,6 +14,7 @@
#include <public/event_channel.h>
#include <public/tmem.h>
#include <public/version.h>
+#include <public/pmu.h>
#include <asm/hypercall.h>
#include <xsm/xsm.h>
@@ -139,6 +140,9 @@ do_tmem_op(
extern long
do_xenoprof_op(int op, XEN_GUEST_HANDLE_PARAM(void) arg);
+extern long
+do_xenpmu_op(int op, XEN_GUEST_HANDLE_PARAM(xen_pmu_params_t)
arg);
+
#ifdef CONFIG_COMPAT
extern int
diff --git a/xen/include/xlat.lst b/xen/include/xlat.lst
index c8fafef..5809c60 100644
--- a/xen/include/xlat.lst
+++ b/xen/include/xlat.lst
@@ -101,6 +101,10 @@
! vcpu_set_singleshot_timer vcpu.h
? xenoprof_init xenoprof.h
? xenoprof_passive xenoprof.h
+? pmu_params pmu.h
+? pmu_intel_ctxt arch-x86/pmu.h
+? pmu_amd_ctxt arch-x86/pmu.h
+? pmu_cntr_pair arch-x86/pmu.h
? flask_access xsm/flask_op.h
! flask_boolean xsm/flask_op.h
? flask_cache_stats xsm/flask_op.h
--
1.8.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
