[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH v6 for-4.5 1/5] libxl: add support for 'channels'



A 'channel':
  - is a low-bandwidth private communication channel that resembles
    a physical serial port.
  - is implemented as a PV console with a well-known string name
    which is used to hook the channel to the appropriate software
    in the guest (i.e. some kind of guest agent).
  - has a backend 'connection' which describes what should happen
    to the data.

The following 'connection' types are defined:

 * PTY: the I/O surfaces as a pty in the backend domain
 * SOCKET: a listening Unix domain socket accepts a connection in
   the backend domain and proxies

Channels may be listed but don't currently support hotplug/unplug.

Signed-off-by: David Scott <dave.scott@xxxxxxxxxx>
---
 docs/misc/channel.txt                |   95 ++++++++++++
 docs/misc/console.txt                |   69 ++++++---
 tools/libxl/libxl.c                  |  268 +++++++++++++++++++++++++++++++---
 tools/libxl/libxl.h                  |   20 +++
 tools/libxl/libxl_create.c           |   38 +++--
 tools/libxl/libxl_dm.c               |   46 +++++-
 tools/libxl/libxl_internal.h         |   10 +-
 tools/libxl/libxl_types.idl          |   37 +++++
 tools/libxl/libxl_types_internal.idl |    5 +
 9 files changed, 538 insertions(+), 50 deletions(-)
 create mode 100644 docs/misc/channel.txt

diff --git a/docs/misc/channel.txt b/docs/misc/channel.txt
new file mode 100644
index 0000000..1b8e405
--- /dev/null
+++ b/docs/misc/channel.txt
@@ -0,0 +1,95 @@
+Xen PV Channels
+===============
+
+A channel is a low-bandwidth private byte stream similar to a serial
+link. Typical uses of channels are
+
+  1. to provide initial configuration information to a VM on boot
+     (example use: CloudStack's cloud-early-config service)
+  2. to signal/query an in-guest agent
+     (example use: oVirt's guest agent)
+
+Channels are similar to virtio-serial devices and emulated serial links.
+Channels are intended to be used in the implementation of libvirt <channel>s
+when running on Xen.
+
+Note: if an application requires a high-bandwidth link then it should use
+vchan instead.
+
+How to use channels: an example
+-------------------------------
+
+Consider a cloud deployment where VMs are cloned from pre-made templates,
+and customised on first boot by an in-guest agent which sets the IP address,
+hostname, ssh keys etc. To install the system the cloud administrator would
+first:
+
+  1. Install a guest as normal (no channel configuration necessary)
+  2. Install the in-guest agent specific to the cloud software. This will
+     prepare the guest to communicate over the channel, and also prepare
+     the guest to be cloned safely (sometimes known as "sysprepping")
+  3. Shutdown the guest
+  4. Register the guest as a template with the cloud orchestration software
+  5. Install the cloud orchestration agent in dom0
+
+At runtime, when a cloud tenant requests that a VM is created from the 
template,
+the sequence of events would be:
+
+  1. A VM is "cloned" from the template
+  2. A unique Unix domain socket path in dom0 is allocated
+     (e.g. /my/cloud/software/talk/to/domain/<vm uuid>)
+  3. Domain configuration is created for the VM, listing the channel
+     name expected by the in-guest agent. In xl syntax this would be:
+
+     channel = [ "connection=socket, name=org.my.cloud.software.agent.version1,
+                  path = /my/cloud/software/talk/to/domain/<vm uuid>" ]
+
+  4. The VM is started
+  5. In dom0 the cloud orchestration agent connects to the Unix domain
+     socket, writes a handshake message and waits for a reply
+  6. In the guest, a udev rule (part of the guest agent package) is activated
+     by the hotplug event, and it starts the in-guest agent.
+  7. The in-guest agent completes a handshake with the dom0 agent
+  8. The dom0 agent transmits the unique VM configuration: hostname, IP
+     address, ssh keys etc etc
+  9. The in-guest agent receives the configuration and applies it.
+
+Using channels avoids having to use a temporary disk device or network
+connection.
+
+Design recommendations and pitfalls
+-----------------------------------
+
+It's necessary to install channel-specific software (an "agent") into the guest
+before you can use a channel. By default a channel will appear as a device
+which could be mistaken for a serial port or regular console. It is known
+that some software will proactively seek out serial ports and issue AT commands
+at them; make sure such software is disabled!
+
+Since channels are identified by names, application authors must ensure their
+channel names are unique to avoid clashes. We recommend that channel names
+include parts unique to the application such as a domain names. To assist
+prevent clashes we recommend authors add their names to our global channel
+registry at the end of this document.
+
+Limitations
+-----------
+
+Hotplug and unplug of channels is not currently implemented.
+
+Channel name registry
+---------------------
+
+It is important that channel names are globally unique. To help ensure
+that no-one's name clashes with yours, please add yours to this list.
+
+Key:
+N: Name
+C: Contact
+D: Short description of use, possibly including a URL to your software
+   or API
+
+N: org.xenproject.guest.clipboard.0.1
+C: David Scott <dave.scott@xxxxxxxxxx>
+D: Share clipboard data via an in-guest agent. See:
+   http://wiki.xenproject.org/wiki/Clipboard_sharing_protocol
diff --git a/docs/misc/console.txt b/docs/misc/console.txt
index 8a53a95..ed7b795 100644
--- a/docs/misc/console.txt
+++ b/docs/misc/console.txt
@@ -9,10 +9,11 @@ relevant information in xenstore under 
/local/domain/$DOMID/console.
 
 Now many years after the introduction of the pv console we have
 multiple pv consoles support for pv and hvm guests; multiple pv
-console backends (qemu and xenconsoled) and emulated serial cards too.
+console backends (qemu and xenconsoled, see limitations below) and
+emulated serial cards too.
 
 This document tries to describe how the whole system works and how the
-different components interact with each others.
+different components interact with each other.
 
 The first PV console path in xenstore remains:
 
@@ -23,28 +24,63 @@ live in:
 
 /local/domain/$DOMID/device/console/$DEVID.
 
-The output of a PV console, whether it should be a file, a pty, a
-socket, or something else, is specified by the toolstack in the xenstore
-node "output", under the relevant console section.
-For example:
+PV consoles have
+* (optional) string names;
+* 'connection' information describing to what they should be
+  connected; and
+* a 'type' indicating which daemon should process the data.
+
+We call a PV console with a name a "channel", in reference to the libvirt
+concept with the same name and purpose. The file "channels.txt" describes
+how to use channels and includes a registry of well-known channel names.
+
+If the PV console has a name (i.e. it is a "channel") then the name
+is written to the frontend directory:
+
+name = <name>
+
+If the PV console has no name (i.e. it is a regular console) then the "name"
+key is omitted.
+
+The toolstack writes 'connection' information in the xenstore backend in
+the keys
+* connection: either 'pty' or 'socket'
+* path: only present if connection = 'socket', the path of the socket to
+  glue the channel to
+
+An artifact of the current implementation, the toolstack will write an
+extra backend key
+* output: an identifier only meaningful for qemu/xenconsoled
 
-# xenstore-read /local/domain/26/device/console/1/output
-pty
+If the toolstack wants the console to be connected to a pty, it will write
+to the backend:
 
-The backend chosen for a particular console is specified by the
-toolstack in the "type" node on xenstore, under the relevant console
-section.
+connection = pty
+output = pty
+
+The backend will write the pty device name to the "tty" node in the
+console frontend.
+
+If the toolstack wants a listening Unix domain socket to be created at path
+<path>, a connection accepted and data proxied to the console, it will write:
+
+connection = socket
+path = <path>
+output = chardev:<some internal identifier>
+
+where chardev:<some internal identifier> matches a qemu character device
+configured on the qemu command-line.
+
+The backend implementation daemon chosen for a particular console is specified
+by the toolstack in the "type" node in the xenstore frontend.
 For example:
 
 # xenstore-read /local/domain/26/console/1/type
-xenconsoled
+ioemu
 
 The supported values are only xenconsoled or ioemu; xenconsoled has
 several limitations: it can only be used for the first PV console and it
-can only have a pty as output.
-
-If the output is a pty, backends write the device name to the "tty" node
-in xenstore under the relevant console path.
+can only connect to a pty.
 
 Emulated serials are provided by qemu-dm only to hvm guests; the number
 of emulated serials depends on how many "-serial" command line options
@@ -54,7 +90,6 @@ xenstore in the following path:
 
 /local/domain/$DOMID/serial/$SERIAL_NUM/tty
 
-
 xenconsole is the tool to connect to a PV console or an emulated serial
 that has a pty as output. Xenconsole takes a domid as parameter plus an
 optional console type (pv for PV consoles or serial for emulated
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 77672d0..9ce93d9 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -21,6 +21,15 @@
 #define PAGE_TO_MEMKB(pages) ((pages) * 4)
 #define BACKEND_STRING_SIZE 5
 
+/* Utility to read backend xenstore keys */
+#define READ_BACKEND(tgc, subpath) ({                                   \
+        rc = libxl__xs_read_checked(tgc, XBT_NULL,                      \
+                                    GCSPRINTF("%s/" subpath, be_path),  \
+                                    &tmp);                              \
+        if (rc) goto out;                                               \
+        (char*)tmp;                                                     \
+    });
+
 int libxl_ctx_alloc(libxl_ctx **pctx, int version,
                     unsigned flags, xentoollog_logger * lg)
 {
@@ -3319,14 +3328,6 @@ static int libxl__device_nic_from_xs_be(libxl__gc *gc,
 
     libxl_device_nic_init(nic);
 
-#define READ_BACKEND(tgc, subpath) ({                                   \
-        rc = libxl__xs_read_checked(tgc, XBT_NULL,                      \
-                                    GCSPRINTF("%s/" subpath, be_path),  \
-                                    &tmp);                              \
-        if (rc) goto out;                                               \
-        (char*)tmp;                                                     \
-    });
-
     tmp = READ_BACKEND(gc, "handle");
     if (tmp)
         nic->devid = atoi(tmp);
@@ -3506,28 +3507,33 @@ const char *libxl__device_nic_devname(libxl__gc *gc,
 
/******************************************************************************/
 int libxl__device_console_add(libxl__gc *gc, uint32_t domid,
                               libxl__device_console *console,
-                              libxl__domain_build_state *state)
+                              libxl__domain_build_state *state,
+                              libxl__device *device)
 {
     flexarray_t *front, *ro_front;
     flexarray_t *back;
-    libxl__device device;
     int rc;
 
     if (console->devid && state) {
         rc = ERROR_INVAL;
         goto out;
     }
+    if (!console->devid && (console->name || console->path)) {
+        LOG(ERROR, "Primary console has invalid configuration");
+        rc = ERROR_INVAL;
+        goto out;
+    }
 
     front = flexarray_make(gc, 16, 1);
     ro_front = flexarray_make(gc, 16, 1);
     back = flexarray_make(gc, 16, 1);
 
-    device.backend_devid = console->devid;
-    device.backend_domid = console->backend_domid;
-    device.backend_kind = LIBXL__DEVICE_KIND_CONSOLE;
-    device.devid = console->devid;
-    device.domid = domid;
-    device.kind = LIBXL__DEVICE_KIND_CONSOLE;
+    device->backend_devid = console->devid;
+    device->backend_domid = console->backend_domid;
+    device->backend_kind = LIBXL__DEVICE_KIND_CONSOLE;
+    device->devid = console->devid;
+    device->domid = domid;
+    device->kind = LIBXL__DEVICE_KIND_CONSOLE;
 
     flexarray_append(back, "frontend-id");
     flexarray_append(back, libxl__sprintf(gc, "%d", domid));
@@ -3540,6 +3546,19 @@ int libxl__device_console_add(libxl__gc *gc, uint32_t 
domid,
     flexarray_append(back, "protocol");
     flexarray_append(back, LIBXL_XENCONSOLE_PROTOCOL);
 
+    if (console->name) {
+        flexarray_append(ro_front, "name");
+        flexarray_append(ro_front, console->name);
+    }
+    if (console->connection) {
+        flexarray_append(back, "connection");
+        flexarray_append(back, console->connection);
+    }
+    if (console->path) {
+        flexarray_append(back, "path");
+        flexarray_append(back, console->path);
+    }
+
     flexarray_append(front, "backend-id");
     flexarray_append(front, libxl__sprintf(gc, "%d", console->backend_domid));
 
@@ -3566,8 +3585,7 @@ int libxl__device_console_add(libxl__gc *gc, uint32_t 
domid,
         flexarray_append(front, "protocol");
         flexarray_append(front, LIBXL_XENCONSOLE_PROTOCOL);
     }
-
-    libxl__device_generic_add(gc, XBT_NULL, &device,
+    libxl__device_generic_add(gc, XBT_NULL, device,
                               libxl__xs_kvs_of_flexarray(gc, back, 
back->count),
                               libxl__xs_kvs_of_flexarray(gc, front, 
front->count),
                               libxl__xs_kvs_of_flexarray(gc, ro_front, 
ro_front->count));
@@ -3578,6 +3596,216 @@ out:
 
 
/******************************************************************************/
 
+int libxl__init_console_from_channel(libxl__gc *gc,
+                                     libxl__device_console *console,
+                                     int dev_num,
+                                     libxl_device_channel *channel)
+{
+    int rc;
+    libxl__device_console_init(console);
+    console->devid = dev_num;
+    console->consback = LIBXL__CONSOLE_BACKEND_IOEMU;
+    if (!channel->name){
+        LOG(ERROR, "channel %d has no name", channel->devid);
+        return ERROR_INVAL;
+    }
+    console->name = libxl__strdup(NOGC, channel->name);
+
+    if (channel->backend_domname) {
+        rc = libxl_domain_qualifier_to_domid(CTX, channel->backend_domname,
+                                             &channel->backend_domid);
+        if (rc < 0) return rc;
+    }
+
+    console->backend_domid = channel->backend_domid;
+
+    /* The xenstore 'output' node tells the backend what to connect the console
+       to. If the channel has "connection = pty" then the "output" node will be
+       set to "pty". If the channel has "connection = socket" then the "output"
+       node will be set to "chardev:libxl-channel%d". This tells the qemu
+       backend to proxy data between the console ring and the character device
+       with id "libxl-channel%d". These character devices are currently defined
+       on the qemu command-line via "-chardev" options in libxl_dm.c */
+
+    switch (channel->connection) {
+        case LIBXL_CHANNEL_CONNECTION_UNKNOWN:
+            LOG(ERROR, "channel %d has no defined connection; "
+                "to where should it be connected?", channel->devid);
+            return ERROR_INVAL;
+        case LIBXL_CHANNEL_CONNECTION_PTY:
+            console->connection = libxl__strdup(NOGC, "pty");
+            console->output = libxl__sprintf(NOGC, "pty");
+            break;
+        case LIBXL_CHANNEL_CONNECTION_SOCKET:
+            console->connection = libxl__strdup(NOGC, "socket");
+            if (!channel->u.socket.path) {
+                LOG(ERROR, "channel %d has no path", channel->devid);
+                return ERROR_INVAL;
+            }
+            console->path = libxl__strdup(NOGC, channel->u.socket.path);
+            console->output = libxl__sprintf(NOGC, "chardev:libxl-channel%d",
+                                             channel->devid);
+            break;
+        default:
+            /* We've forgotten to add the clause */
+            LOG(ERROR, "%s: missing implementation for channel connection %d",
+                __func__, channel->connection);
+            abort();
+    }
+
+    return 0;
+}
+
+static int libxl__device_channel_from_xs_be(libxl__gc *gc,
+                                            const char *be_path,
+                                            libxl_device_channel *channel)
+{
+    const char *tmp;
+    int rc;
+
+    libxl_device_channel_init(channel);
+
+    /* READ_BACKEND is from libxl__device_nic_from_xs_be above */
+    channel->name = READ_BACKEND(NOGC, "name");
+    tmp = READ_BACKEND(gc, "connection");
+    if (!strcmp(tmp, "pty")) {
+        channel->connection = LIBXL_CHANNEL_CONNECTION_PTY;
+    } else if (!strcmp(tmp, "socket")) {
+        channel->connection = LIBXL_CHANNEL_CONNECTION_SOCKET;
+        channel->u.socket.path = READ_BACKEND(NOGC, "path");
+    } else {
+        rc = ERROR_INVAL;
+        goto out;
+    }
+
+    rc = 0;
+ out:
+    return rc;
+}
+
+static int libxl__append_channel_list_of_type(libxl__gc *gc,
+                                              uint32_t domid,
+                                              const char *type,
+                                              libxl_device_channel **channels,
+                                              int *nchannels)
+{
+    char *fe_path = NULL, *be_path = NULL;
+    char **dir = NULL;
+    unsigned int n = 0, devid = 0;
+    libxl_device_channel *next = NULL;
+    int rc = 0, i;
+
+    fe_path = GCSPRINTF("%s/device/%s",
+                        libxl__xs_get_dompath(gc, domid), type);
+    dir = libxl__xs_directory(gc, XBT_NULL, fe_path, &n);
+    if (!dir || !n)
+      goto out;
+
+    for (i = 0; i < n; i++) {
+        const char *p, *name;
+        libxl_device_channel *tmp;
+        p = libxl__sprintf(gc, "%s/%s", fe_path, dir[i]);
+        name = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/name", p));
+        /* 'channels' are consoles with names, so ignore all consoles
+           without names */
+        if (!name) continue;
+        be_path = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/backend", p));
+        tmp = realloc(*channels,
+                      sizeof(libxl_device_channel) * (*nchannels + devid + 1));
+        if (!tmp) {
+          rc = ERROR_NOMEM;
+          goto out;
+        }
+        *channels = tmp;
+        next = *channels + *nchannels + devid;
+        rc = libxl__device_channel_from_xs_be(gc, be_path, next);
+        if (rc) goto out;
+        next->devid = devid;
+        devid++;
+    }
+    *nchannels += devid;
+    return 0;
+
+ out:
+    return rc;
+}
+
+libxl_device_channel *libxl_device_channel_list(libxl_ctx *ctx,
+                                                uint32_t domid,
+                                                int *num)
+{
+    GC_INIT(ctx);
+    libxl_device_channel *channels = NULL;
+    int rc;
+
+    *num = 0;
+
+    rc = libxl__append_channel_list_of_type(gc, domid, "console", &channels, 
num);
+    if (rc) goto out_err;
+
+    GC_FREE;
+    return channels;
+
+out_err:
+    LOG(ERROR, "Unable to list channels");
+    while (*num) {
+        (*num)--;
+        libxl_device_channel_dispose(&channels[*num]);
+    }
+    free(channels);
+    return NULL;
+}
+
+int libxl_device_channel_getinfo(libxl_ctx *ctx, uint32_t domid,
+                                 libxl_device_channel *channel,
+                                 libxl_channelinfo *channelinfo)
+{
+    GC_INIT(ctx);
+    char *dompath, *fe_path;
+    char *val;
+
+    dompath = libxl__xs_get_dompath(gc, domid);
+    channelinfo->devid = channel->devid;
+
+    fe_path = libxl__sprintf(gc, "%s/device/console/%d", dompath,
+                             channelinfo->devid + 1);
+    channelinfo->backend = xs_read(ctx->xsh, XBT_NULL,
+                                   libxl__sprintf(gc, "%s/backend",
+                                   fe_path), NULL);
+    if (!channelinfo->backend) {
+        GC_FREE;
+        return ERROR_FAIL;
+    }
+    val = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/backend-id", fe_path));
+    channelinfo->backend_id = val ? strtoul(val, NULL, 10) : -1;
+    val = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/state", fe_path));
+    channelinfo->state = val ? strtoul(val, NULL, 10) : -1;
+    channelinfo->frontend = xs_read(ctx->xsh, XBT_NULL,
+                                    GCSPRINTF("%s/frontend",
+                                    channelinfo->backend), NULL);
+    val = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/frontend-id",
+                         channelinfo->backend));
+    channelinfo->frontend_id = val ? strtoul(val, NULL, 10) : -1;
+    val = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/ring-ref", fe_path));
+    channelinfo->rref = val ? strtoul(val, NULL, 10) : -1;
+    val = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/port", fe_path));
+    channelinfo->evtch = val ? strtoul(val, NULL, 10) : -1;
+
+    channelinfo->connection = channel->connection;
+    switch (channel->connection) {
+         case LIBXL_CHANNEL_CONNECTION_PTY:
+             val = libxl__xs_read(gc, XBT_NULL, GCSPRINTF("%s/tty", fe_path));
+             channelinfo->u.pty.path = strdup(val);
+             break;
+         default:
+             break;
+    }
+    GC_FREE;
+    return 0;
+}
+
+/******************************************************************************/
+
 int libxl__device_vkb_setdefault(libxl__gc *gc, libxl_device_vkb *vkb)
 {
     int rc;
@@ -3842,6 +4070,10 @@ DEFINE_DEVICE_REMOVE(vfb, destroy, 1)
 DEFINE_DEVICE_REMOVE(vtpm, remove, 0)
 DEFINE_DEVICE_REMOVE(vtpm, destroy, 1)
 
+/* channel/console hotunplug is not implemented. There are 2 possibilities:
+ * 1. add support for secondary consoles to xenconsoled
+ * 2. dynamically add/remove qemu chardevs via qmp messages. */
+
 #undef DEFINE_DEVICE_REMOVE
 
 
/******************************************************************************/
diff --git a/tools/libxl/libxl.h b/tools/libxl/libxl.h
index bc68cac..300e489 100644
--- a/tools/libxl/libxl.h
+++ b/tools/libxl/libxl.h
@@ -583,6 +583,15 @@ typedef struct libxl__ctx libxl_ctx;
  */
 #define LIBXL_HAVE_BUILDINFO_KERNEL 1
 
+/*
+ * LIBXL_HAVE_DEVICE_CHANNEL
+ *
+ * If this is defined, then the libxl_device_channel struct exists
+ * and channels can be attached to a domain. Channels manifest as consoles
+ * with names, see docs/misc/console.txt.
+ */
+#define LIBXL_HAVE_DEVICE_CHANNEL 1
+
 /* Functions annotated with LIBXL_EXTERNAL_CALLERS_ONLY may not be
  * called from within libxl itself. Callers outside libxl, who
  * do not #include libxl_internal.h, are fine. */
@@ -1129,6 +1138,17 @@ libxl_device_nic *libxl_device_nic_list(libxl_ctx *ctx, 
uint32_t domid, int *num
 int libxl_device_nic_getinfo(libxl_ctx *ctx, uint32_t domid,
                               libxl_device_nic *nic, libxl_nicinfo *nicinfo);
 
+/*
+ * Virtual Channels
+ * Channels manifest as consoles with names, see docs/misc/channels.txt
+ */
+libxl_device_channel *libxl_device_channel_list(libxl_ctx *ctx,
+                                                uint32_t domid,
+                                                int *num);
+int libxl_device_channel_getinfo(libxl_ctx *ctx, uint32_t domid,
+                                 libxl_device_channel *channel,
+                                 libxl_channelinfo *channelinfo);
+
 /* Virtual TPMs */
 int libxl_device_vtpm_add(libxl_ctx *ctx, uint32_t domid, libxl_device_vtpm 
*vtpm,
                           const libxl_asyncop_how *ao_how)
diff --git a/tools/libxl/libxl_create.c b/tools/libxl/libxl_create.c
index 8b82584..4be4c5c 100644
--- a/tools/libxl/libxl_create.c
+++ b/tools/libxl/libxl_create.c
@@ -387,14 +387,16 @@ int libxl__domain_build_info_setdefault(libxl__gc *gc,
     return 0;
 }
 
-static int init_console_info(libxl__device_console *console, int dev_num)
+static int init_console_info(libxl__gc *gc,
+                             libxl__device_console *console,
+                             int dev_num)
 {
-    memset(console, 0x00, sizeof(libxl__device_console));
+    libxl__device_console_init(console);
     console->devid = dev_num;
     console->consback = LIBXL__CONSOLE_BACKEND_XENCONSOLED;
-    console->output = strdup("pty");
-    if (!console->output)
-        return ERROR_NOMEM;
+    console->output = libxl__strdup(NOGC, "pty");
+    /* console->{name,connection,path} are NULL on normal consoles.
+       Only 'channels' when mapped to consoles have a string name. */
     return 0;
 }
 
@@ -1194,17 +1196,31 @@ static void domcreate_launch_dm(libxl__egc *egc, 
libxl__multidev *multidev,
         }
     }
 
+    /* For both HVM and PV the 0th console is a regular console. We
+       map channels to IOEMU consoles starting at 1 */
+    for (i = 0; i < d_config->num_channels; i++) {
+        libxl__device_console console;
+        libxl__device device;
+        ret = libxl__init_console_from_channel(gc, &console, i + 1,
+                                               &d_config->channels[i]);
+        if ( ret )
+            goto error_out;
+        libxl__device_console_add(gc, domid, &console, NULL, &device);
+        libxl__device_console_dispose(&console);
+    }
+
     switch (d_config->c_info.type) {
     case LIBXL_DOMAIN_TYPE_HVM:
     {
         libxl__device_console console;
+        libxl__device device;
         libxl_device_vkb vkb;
 
-        ret = init_console_info(&console, 0);
+        ret = init_console_info(gc, &console, 0);
         if ( ret )
             goto error_out;
         console.backend_domid = state->console_domid;
-        libxl__device_console_add(gc, domid, &console, state);
+        libxl__device_console_add(gc, domid, &console, state, &device);
         libxl__device_console_dispose(&console);
 
         libxl_device_vkb_init(&vkb);
@@ -1231,22 +1247,24 @@ static void domcreate_launch_dm(libxl__egc *egc, 
libxl__multidev *multidev,
     {
         int need_qemu = 0;
         libxl__device_console console;
+        libxl__device device;
 
         for (i = 0; i < d_config->num_vfbs; i++) {
             libxl__device_vfb_add(gc, domid, &d_config->vfbs[i]);
             libxl__device_vkb_add(gc, domid, &d_config->vkbs[i]);
         }
 
-        ret = init_console_info(&console, 0);
+        ret = init_console_info(gc, &console, 0);
         if ( ret )
             goto error_out;
 
         need_qemu = libxl__need_xenpv_qemu(gc, 1, &console,
                 d_config->num_vfbs, d_config->vfbs,
-                d_config->num_disks, &d_config->disks[0]);
+                d_config->num_disks, &d_config->disks[0],
+                d_config->num_channels, &d_config->channels[0]);
 
         console.backend_domid = state->console_domid;
-        libxl__device_console_add(gc, domid, &console, state);
+        libxl__device_console_add(gc, domid, &console, state, &device);
         libxl__device_console_dispose(&console);
 
         if (need_qemu) {
diff --git a/tools/libxl/libxl_dm.c b/tools/libxl/libxl_dm.c
index fbc82fd..dc748be 100644
--- a/tools/libxl/libxl_dm.c
+++ b/tools/libxl/libxl_dm.c
@@ -416,8 +416,9 @@ static char ** libxl__build_device_model_args_new(libxl__gc 
*gc,
     const libxl_sdl_info *sdl = dm_sdl(guest_config);
     const char *keymap = dm_keymap(guest_config);
     flexarray_t *dm_args;
-    int i;
+    int i, connection, devid;
     uint64_t ram_size;
+    const char *path, *chardev;
 
     dm_args = flexarray_make(gc, 16, 1);
 
@@ -434,6 +435,28 @@ static char ** 
libxl__build_device_model_args_new(libxl__gc *gc,
     flexarray_append(dm_args, "-mon");
     flexarray_append(dm_args, "chardev=libxl-cmd,mode=control");
 
+    for (i = 0; i < guest_config->num_channels; i++) {
+        connection = guest_config->channels[i].connection;
+        devid = guest_config->channels[i].devid;
+        switch (connection) {
+            case LIBXL_CHANNEL_CONNECTION_PTY:
+                chardev = GCSPRINTF("pty,id=libxl-channel%d", devid);
+                break;
+            case LIBXL_CHANNEL_CONNECTION_SOCKET:
+                path = guest_config->channels[i].u.socket.path;
+                chardev = GCSPRINTF("socket,id=libxl-channel%d,path=%s,"
+                                    "server,nowait", devid, path);
+                break;
+            default:
+                /* We've forgotten to add the clause */
+                LOG(ERROR, "%s: unknown channel connection %d",
+                    __func__, connection);
+                return NULL;
+        }
+        flexarray_append(dm_args, "-chardev");
+        flexarray_append(dm_args, (void*)chardev);
+    }
+
     /*
      * Remove default devices created by qemu. Qemu will create only devices
      * defined by xen, since the devices not defined by xen are not usable.
@@ -1116,6 +1139,7 @@ static void spawn_stub_launch_dm(libxl__egc *egc,
     }
 
     for (i = 0; i < num_console; i++) {
+        libxl__device device;
         console[i].devid = i;
         console[i].consback = LIBXL__CONSOLE_BACKEND_IOEMU;
         /* STUBDOM_CONSOLE_LOGGING (console 0) is for minios logging
@@ -1146,7 +1170,8 @@ static void spawn_stub_launch_dm(libxl__egc *egc,
                 break;
         }
         ret = libxl__device_console_add(gc, dm_domid, &console[i],
-                        i == STUBDOM_CONSOLE_LOGGING ? stubdom_state : NULL);
+                        i == STUBDOM_CONSOLE_LOGGING ? stubdom_state : NULL,
+                        &device);
         if (ret)
             goto out;
     }
@@ -1566,7 +1591,8 @@ int libxl__destroy_device_model(libxl__gc *gc, uint32_t 
domid)
 int libxl__need_xenpv_qemu(libxl__gc *gc,
         int nr_consoles, libxl__device_console *consoles,
         int nr_vfbs, libxl_device_vfb *vfbs,
-        int nr_disks, libxl_device_disk *disks)
+        int nr_disks, libxl_device_disk *disks,
+        int nr_channels, libxl_device_channel *channels)
 {
     int i, ret = 0;
     uint32_t domid;
@@ -1606,6 +1632,20 @@ int libxl__need_xenpv_qemu(libxl__gc *gc,
         }
     }
 
+    if (nr_channels > 0) {
+        ret = libxl__get_domid(gc, &domid);
+        if (ret) goto out;
+        for (i = 0; i < nr_channels; i++) {
+            if (channels[i].backend_domid == domid) {
+                /* xenconsoled is limited to the first console only.
+                   Until this restriction is removed we must use qemu for
+                   secondary consoles which includes all channels. */
+                ret = 1;
+                goto out;
+            }
+        }
+    }
+
 out:
     return ret;
 }
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index f61673c..151c474 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -1033,7 +1033,8 @@ _hidden int libxl__device_disk_dev_number(const char 
*virtpath,
 
 _hidden int libxl__device_console_add(libxl__gc *gc, uint32_t domid,
                                       libxl__device_console *console,
-                                      libxl__domain_build_state *state);
+                                      libxl__domain_build_state *state,
+                                      libxl__device *device);
 
 /* Returns 1 if device exists, 0 if not, ERROR_* (<0) on error. */
 _hidden int libxl__device_exists(libxl__gc *gc, xs_transaction_t t,
@@ -1049,6 +1050,10 @@ _hidden int libxl__wait_for_backend(libxl__gc *gc, const 
char *be_path,
                                     const char *state);
 _hidden int libxl__nic_type(libxl__gc *gc, libxl__device *dev,
                             libxl_nic_type *nictype);
+_hidden int libxl__init_console_from_channel(libxl__gc *gc,
+                                             libxl__device_console *console,
+                                             int dev_num,
+                                             libxl_device_channel *channel);
 
 /*
  * For each aggregate type which can be used as an input we provide:
@@ -1468,7 +1473,8 @@ _hidden const char *libxl__domain_device_model(libxl__gc 
*gc,
 _hidden int libxl__need_xenpv_qemu(libxl__gc *gc,
         int nr_consoles, libxl__device_console *consoles,
         int nr_vfbs, libxl_device_vfb *vfbs,
-        int nr_disks, libxl_device_disk *disks);
+        int nr_disks, libxl_device_disk *disks,
+        int nr_channels, libxl_device_channel *channels);
 
 /*
  * This function will cause the whole libxl process to hang
diff --git a/tools/libxl/libxl_types.idl b/tools/libxl/libxl_types.idl
index f1fcbc3..59c3d0b 100644
--- a/tools/libxl/libxl_types.idl
+++ b/tools/libxl/libxl_types.idl
@@ -69,6 +69,12 @@ libxl_domain_type = Enumeration("domain_type", [
     (2, "PV"),
     ], init_val = "LIBXL_DOMAIN_TYPE_INVALID")
 
+libxl_channel_connection = Enumeration("channel_connection", [
+    (0, "UNKNOWN"),
+    (1, "PTY"),
+    (2, "SOCKET"), # a listening Unix domain socket
+    ])
+
 libxl_device_model_version = Enumeration("device_model_version", [
     (0, "UNKNOWN"),
     (1, "QEMU_XEN_TRADITIONAL"), # Historical qemu-xen device model (qemu-dm)
@@ -269,6 +275,22 @@ libxl_cpupoolinfo = Struct("cpupoolinfo", [
     ("cpumap",      libxl_bitmap)
     ], dir=DIR_OUT)
 
+libxl_channelinfo = Struct("channelinfo", [
+    ("backend", string),
+    ("backend_id", uint32),
+    ("frontend", string),
+    ("frontend_id", uint32),
+    ("devid", libxl_devid),
+    ("state", integer),
+    ("evtch", integer),
+    ("rref", integer),
+    ("u", KeyedUnion(None, libxl_channel_connection, "connection",
+           [("unknown", None),
+            ("pty", Struct(None, [("path", string),])),
+            ("socket", None),
+           ])),
+    ], dir=DIR_OUT)
+
 libxl_vminfo = Struct("vminfo", [
     ("uuid", libxl_uuid),
     ("domid", libxl_domid),
@@ -491,6 +513,18 @@ libxl_device_vtpm = Struct("device_vtpm", [
     ("uuid",             libxl_uuid),
 ])
 
+libxl_device_channel = Struct("device_channel", [
+    ("backend_domid", libxl_domid),
+    ("backend_domname", string),
+    ("devid", libxl_devid),
+    ("name", string),
+    ("u", KeyedUnion(None, libxl_channel_connection, "connection",
+           [("unknown", None),
+            ("pty", None),
+            ("socket", Struct(None, [("path", string)])),
+           ])),
+])
+
 libxl_domain_config = Struct("domain_config", [
     ("c_info", libxl_domain_create_info),
     ("b_info", libxl_domain_build_info),
@@ -501,6 +535,9 @@ libxl_domain_config = Struct("domain_config", [
     ("vfbs", Array(libxl_device_vfb, "num_vfbs")),
     ("vkbs", Array(libxl_device_vkb, "num_vkbs")),
     ("vtpms", Array(libxl_device_vtpm, "num_vtpms")),
+    # a channel manifests as a console with a name,
+    # see docs/misc/channels.txt
+    ("channels", Array(libxl_device_channel, "num_channels")),
 
     ("on_poweroff", libxl_action_on_shutdown),
     ("on_reboot", libxl_action_on_shutdown),
diff --git a/tools/libxl/libxl_types_internal.idl 
b/tools/libxl/libxl_types_internal.idl
index 800361b..5e55685 100644
--- a/tools/libxl/libxl_types_internal.idl
+++ b/tools/libxl/libxl_types_internal.idl
@@ -34,6 +34,11 @@ libxl__device_console = Struct("device_console", [
     ("devid", integer),
     ("consback", libxl__console_backend),
     ("output", string),
+    # A regular console has no name.
+    # A console with a name is called a 'channel', see docs/misc/channels.txt
+    ("name", string),
+    ("connection", string),
+    ("path", string),
     ])
 
 libxl__device_action = Enumeration("device_action", [
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.