|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH for-4.5 v21 08/14] libxl/remus: setup and control disk replication for DRBD backends
This patch adds the machinery required for protecting a guest's
disk state, when the guest disk uses a DRBD disk backend.
This patch comprises of two parts:
1. Hotplug scripts: The block-drbd-probe script is responsible for
performing sanity checks on the state of the DRBD disk before the
checkpointing process begins. This script should be invoked by
libxl for each of the guest's disk devices, when starting Remus.
2. Remus drbd disk device: Implements the interfaces required by the
remus abstract device layer. A note about the implementation:
a) setup() is called for each disk attached to the guest.
During setup():
i) The hotplug script is called to perform the sanity check.
ii) Libxl obtains a handle to the DRBD device (/dev/drbd*) and
and subsequently controls disk checkpoint replication using
this handle in the checkpoint callbacks.
c) The preresume() checkpoint callback is executed asynchronously
using libxl__ev_child_fork(), as it may potentially block for more
than few seconds in case of backup failure.
Signed-off-by: Lai Jiangshan <laijs@xxxxxxxxxxxxxx>
Signed-off-by: Wen Congyang <wency@xxxxxxxxxxxxxx>
Signed-off-by: Yang Hongyang <yanghy@xxxxxxxxxxxxxx>
Signed-off-by: Ian Jackson <Ian.Jackson@xxxxxxxxxxxxx>
Edits to commit message:
Signed-off-by: Shriram Rajagopalan <rshriram@xxxxxxxxx>
Acked-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx>
Acked-by: Konrad Rzeszutek Wilk <konrad.wilk@xxxxxxxxxx>
---
docs/README.remus | 10 ++
tools/hotplug/Linux/Makefile | 1 +
tools/hotplug/Linux/block-drbd-probe | 87 ++++++++++++
tools/libxl/Makefile | 2 +-
tools/libxl/libxl.c | 1 +
tools/libxl/libxl_internal.h | 5 +
tools/libxl/libxl_remus_device.c | 7 +
tools/libxl/libxl_remus_disk_drbd.c | 258 +++++++++++++++++++++++++++++++++++
8 files changed, 370 insertions(+), 1 deletion(-)
create mode 100755 tools/hotplug/Linux/block-drbd-probe
create mode 100644 tools/libxl/libxl_remus_disk_drbd.c
diff --git a/docs/README.remus b/docs/README.remus
index ddf5b55..20783c9 100644
--- a/docs/README.remus
+++ b/docs/README.remus
@@ -8,3 +8,13 @@ Using Remus with libxl on Xen 4.5 and higher:
or higher along with the development headers and command line utilities.
If your distro does not have the appropriate libnl3 version, you can find
the latest source tarball of libnl3 at
http://www.carisma.slowglass.com/~tgr/libnl/
+
+Disk replication:
+ VMs protected by Remus need to use DRBD based disk backends. Specifically, you
+ need a compile and install a custom version of DRBD, that is available
publicly
+ at https://github.com/rshriram/remus-drbd
+ This code is based on DRBD 8.3.11 and uses a new replication protocol (named
+ protocol D) for asynchronous disk checkpoint replication. A protected VM's
DRBD
+ disks on the primary and backup hosts need to be configured to use protocol D
+ as the replication protocol. An example resource configuration file can be
found
+ in the aforementioned github repository.
diff --git a/tools/hotplug/Linux/Makefile b/tools/hotplug/Linux/Makefile
index 31e57f7..5317fef 100644
--- a/tools/hotplug/Linux/Makefile
+++ b/tools/hotplug/Linux/Makefile
@@ -24,6 +24,7 @@ XEN_SCRIPTS += xen-hotplug-cleanup
XEN_SCRIPTS += external-device-migrate
XEN_SCRIPTS += vscsi
XEN_SCRIPTS += block-iscsi
+XEN_SCRIPTS += block-drbd-probe
XEN_SCRIPTS += $(XEN_SCRIPTS-y)
SUBDIRS-$(CONFIG_SYSTEMD) += systemd
diff --git a/tools/hotplug/Linux/block-drbd-probe
b/tools/hotplug/Linux/block-drbd-probe
new file mode 100755
index 0000000..247a9d0
--- /dev/null
+++ b/tools/hotplug/Linux/block-drbd-probe
@@ -0,0 +1,87 @@
+#! /bin/bash
+#
+# Copyright (C) 2014 FUJITSU LIMITED
+#
+# This library is free software; you can redistribute it and/or
+# modify it under the terms of version 2.1 of the GNU Lesser General Public
+# License as published by the Free Software Foundation.
+#
+# This library is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public
+# License along with this library; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+#
+# Usage:
+# block-drbd-probe devicename
+#
+# Return value:
+# 0: the device is drbd device
+# 1: the device is not drbd device
+# 2: unkown error
+# 3: the drbd device does not use protocol D
+# 4: the drbd device is not ready
+
+set -e
+
+drbd_res=
+
+function get_res_name()
+{
+ local drbd_dev=$1
+ local drbd_dev_list=($(drbdadm sh-dev all))
+ local drbd_res_list=($(drbdadm sh-resource all))
+ local temp_drbd_dev temp_drbd_res
+ local found=0
+
+ for temp_drbd_dev in ${drbd_dev_list[@]}; do
+ if [[ "$temp_drbd_dev" == "$drbd_dev" ]]; then
+ found=1
+ break
+ fi
+ done
+
+ if [[ $found -eq 0 ]]; then
+ return 1
+ fi
+
+ for temp_drbd_res in ${drbd_res_list[@]}; do
+ temp_drbd_dev=$(drbdadm sh-dev $temp_drbd_res)
+ if [[ "$temp_drbd_dev" == "$drbd_dev" ]]; then
+ drbd_res="$temp_drbd_res"
+ return 0
+ fi
+ done
+
+ # OOPS
+ return 2
+}
+
+get_res_name $1
+rc=$?
+if [[ $rc -ne 0 ]]; then
+ exit $rc
+fi
+
+# check protocol
+drbdsetup $1 show | grep -q "protocol D;"
+if [[ $? -ne 0 ]]; then
+ exit 3
+fi
+
+# check connect status
+state=$(drbdadm cstate "$drbd_res")
+if [[ "$state" != "Connected" ]]; then
+ exit 4
+fi
+
+# check role
+role=$(drbdadm role "$drbd_res")
+if [[ "$role" != "Primary/Secondary" ]]; then
+ exit 4
+fi
+
+exit 0
diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile
index da3cddb..a6c3b0e 100644
--- a/tools/libxl/Makefile
+++ b/tools/libxl/Makefile
@@ -56,7 +56,7 @@ else
LIBXL_OBJS-y += libxl_nonetbuffer.o
endif
-LIBXL_OBJS-y += libxl_remus_device.o
+LIBXL_OBJS-y += libxl_remus_device.o libxl_remus_disk_drbd.o
LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o
LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o
diff --git a/tools/libxl/libxl.c b/tools/libxl/libxl.c
index 27fdfc2..1856ae5 100644
--- a/tools/libxl/libxl.c
+++ b/tools/libxl/libxl.c
@@ -825,6 +825,7 @@ int libxl_domain_remus_start(libxl_ctx *ctx,
libxl_domain_remus_info *info,
goto out;
}
rds->device_kind_flags |= (1 << LIBXL__DEVICE_KIND_VIF);
+ rds->device_kind_flags |= (1 << LIBXL__DEVICE_KIND_VBD);
rds->ao = ao;
rds->domid = domid;
diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h
index 2776d19..b87c5e2 100644
--- a/tools/libxl/libxl_internal.h
+++ b/tools/libxl/libxl_internal.h
@@ -2667,6 +2667,8 @@ struct libxl__remus_device_instance_ops {
int init_subkind_nic(libxl__remus_devices_state *rds);
void cleanup_subkind_nic(libxl__remus_devices_state *rds);
+int init_subkind_drbd_disk(libxl__remus_devices_state *rds);
+void cleanup_subkind_drbd_disk(libxl__remus_devices_state *rds);
typedef void libxl__remus_callback(libxl__egc *,
libxl__remus_devices_state *, int rc);
@@ -2709,6 +2711,9 @@ struct libxl__remus_devices_state {
char *netbufscript;
struct nl_sock *nlsock;
struct nl_cache *qdisc_cache;
+
+ /* private for drbd disk subkind ops */
+ char *drbd_probe_script;
};
/*
diff --git a/tools/libxl/libxl_remus_device.c b/tools/libxl/libxl_remus_device.c
index b20168f..a6cb7f6 100644
--- a/tools/libxl/libxl_remus_device.c
+++ b/tools/libxl/libxl_remus_device.c
@@ -18,8 +18,10 @@
#include "libxl_internal.h"
extern const libxl__remus_device_instance_ops remus_device_nic;
+extern const libxl__remus_device_instance_ops remus_device_drbd_disk;
static const libxl__remus_device_instance_ops *remus_ops[] = {
&remus_device_nic,
+ &remus_device_drbd_disk,
NULL,
};
@@ -36,6 +38,9 @@ static int init_device_subkind(libxl__remus_devices_state
*rds)
if (rc) goto out;
}
+ rc = init_subkind_drbd_disk(rds);
+ if (rc) goto out;
+
rc = 0;
out:
return rc;
@@ -48,6 +53,8 @@ static void cleanup_device_subkind(libxl__remus_devices_state
*rds)
if (libxl__netbuffer_enabled(gc))
cleanup_subkind_nic(rds);
+
+ cleanup_subkind_drbd_disk(rds);
}
/*----- setup() and teardown() -----*/
diff --git a/tools/libxl/libxl_remus_disk_drbd.c
b/tools/libxl/libxl_remus_disk_drbd.c
new file mode 100644
index 0000000..3215f93
--- /dev/null
+++ b/tools/libxl/libxl_remus_disk_drbd.c
@@ -0,0 +1,258 @@
+/*
+ * Copyright (C) 2014 FUJITSU LIMITED
+ * Author Lai Jiangshan <laijs@xxxxxxxxxxxxxx>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU Lesser General Public License as published
+ * by the Free Software Foundation; version 2.1 only. with the special
+ * exception on linking described in file LICENSE.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU Lesser General Public License for more details.
+ */
+
+#include "libxl_osdeps.h" /* must come before any other headers */
+
+#include "libxl_internal.h"
+
+/*** drbd implementation ***/
+const int DRBD_SEND_CHECKPOINT = 20;
+const int DRBD_WAIT_CHECKPOINT_ACK = 30;
+
+typedef struct libxl__remus_drbd_disk {
+ int ctl_fd;
+ int ackwait;
+} libxl__remus_drbd_disk;
+
+int init_subkind_drbd_disk(libxl__remus_devices_state *rds)
+{
+ STATE_AO_GC(rds->ao);
+
+ rds->drbd_probe_script = GCSPRINTF("%s/block-drbd-probe",
+ libxl__xen_script_dir_path());
+
+ return 0;
+}
+
+void cleanup_subkind_drbd_disk(libxl__remus_devices_state *rds)
+{
+ return;
+}
+
+/*----- helper functions, for async calls -----*/
+static void drbd_async_call(libxl__egc *egc,
+ libxl__remus_device *dev,
+ void func(libxl__remus_device *),
+ libxl__ev_child_callback callback)
+{
+ int pid = -1, rc;
+ libxl__ao_device *aodev = &dev->aodev;
+ STATE_AO_GC(dev->rds->ao);
+
+ /* Fork and call */
+ pid = libxl__ev_child_fork(gc, &aodev->child, callback);
+ if (pid == -1) {
+ LOG(ERROR, "unable to fork");
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ if (!pid) {
+ /* child */
+ func(dev);
+ /* notreached */
+ abort();
+ }
+
+ return;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+}
+
+/*----- match(), setup() and teardown() -----*/
+
+/* callbacks */
+static void match_async_exec_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status);
+
+/* implementations */
+
+static void match_async_exec(libxl__egc *egc, libxl__remus_device *dev);
+
+static void drbd_setup(libxl__egc *egc, libxl__remus_device *dev)
+{
+ STATE_AO_GC(dev->rds->ao);
+
+ match_async_exec(egc, dev);
+}
+
+static void match_async_exec(libxl__egc *egc, libxl__remus_device *dev)
+{
+ int arraysize, nr = 0, rc;
+ const libxl_device_disk *disk = dev->backend_dev;
+ libxl__async_exec_state *aes = &dev->aodev.aes;
+ STATE_AO_GC(dev->rds->ao);
+
+ /* setup env & args */
+ arraysize = 1;
+ GCNEW_ARRAY(aes->env, arraysize);
+ aes->env[nr++] = NULL;
+ assert(nr <= arraysize);
+
+ arraysize = 3;
+ nr = 0;
+ GCNEW_ARRAY(aes->args, arraysize);
+ aes->args[nr++] = dev->rds->drbd_probe_script;
+ aes->args[nr++] = disk->pdev_path;
+ aes->args[nr++] = NULL;
+ assert(nr <= arraysize);
+
+ aes->ao = dev->rds->ao;
+ aes->what = GCSPRINTF("%s %s", aes->args[0], aes->args[1]);
+ aes->timeout_ms = LIBXL_HOTPLUG_TIMEOUT * 1000;
+ aes->callback = match_async_exec_cb;
+ aes->stdfds[0] = -1;
+ aes->stdfds[1] = -1;
+ aes->stdfds[2] = -1;
+
+ rc = libxl__async_exec_start(gc, aes);
+ if (rc)
+ goto out;
+
+ return;
+
+out:
+ dev->aodev.rc = rc;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+static void match_async_exec_cb(libxl__egc *egc,
+ libxl__async_exec_state *aes,
+ int status)
+{
+ int rc;
+ libxl__ao_device *aodev = CONTAINER_OF(aes, *aodev, aes);
+ libxl__remus_device *dev = CONTAINER_OF(aodev, *dev, aodev);
+ libxl__remus_drbd_disk *drbd_disk;
+ const libxl_device_disk *disk = dev->backend_dev;
+
+ STATE_AO_GC(aodev->ao);
+
+ if (status) {
+ rc = ERROR_REMUS_DEVOPS_DOES_NOT_MATCH;
+ goto out;
+ }
+
+ /* ops matched */
+ dev->matched = true;
+
+ GCNEW(drbd_disk);
+ dev->concrete_data = drbd_disk;
+ drbd_disk->ackwait = 0;
+ drbd_disk->ctl_fd = open(disk->pdev_path, O_RDONLY);
+ if (drbd_disk->ctl_fd < 0) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rc = 0;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+}
+
+static void drbd_teardown(libxl__egc *egc, libxl__remus_device *dev)
+{
+ libxl__remus_drbd_disk *drbd_disk = dev->concrete_data;
+ STATE_AO_GC(dev->rds->ao);
+
+ close(drbd_disk->ctl_fd);
+ dev->aodev.rc = 0;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+/*----- checkpointing APIs -----*/
+
+/* callbacks */
+static void checkpoint_async_call_done(libxl__egc *egc,
+ libxl__ev_child *child,
+ pid_t pid, int status);
+
+/* API implementations */
+
+/* this op will not wait and block, so implement as sync op */
+static void drbd_postsuspend(libxl__egc *egc, libxl__remus_device *dev)
+{
+ STATE_AO_GC(dev->rds->ao);
+
+ libxl__remus_drbd_disk *rdd = dev->concrete_data;
+
+ if (!rdd->ackwait) {
+ if (ioctl(rdd->ctl_fd, DRBD_SEND_CHECKPOINT, 0) <= 0)
+ rdd->ackwait = 1;
+ }
+
+ dev->aodev.rc = 0;
+ dev->aodev.callback(egc, &dev->aodev);
+}
+
+
+static void drbd_preresume_async(libxl__remus_device *dev);
+
+static void drbd_preresume(libxl__egc *egc, libxl__remus_device *dev)
+{
+ STATE_AO_GC(dev->rds->ao);
+
+ drbd_async_call(egc, dev, drbd_preresume_async,
checkpoint_async_call_done);
+}
+
+static void drbd_preresume_async(libxl__remus_device *dev)
+{
+ libxl__remus_drbd_disk *rdd = dev->concrete_data;
+ int ackwait = rdd->ackwait;
+
+ if (ackwait) {
+ ioctl(rdd->ctl_fd, DRBD_WAIT_CHECKPOINT_ACK, 0);
+ ackwait = 0;
+ }
+
+ _exit(ackwait);
+}
+
+static void checkpoint_async_call_done(libxl__egc *egc,
+ libxl__ev_child *child,
+ pid_t pid, int status)
+{
+ int rc;
+ libxl__ao_device *aodev = CONTAINER_OF(child, *aodev, child);
+ libxl__remus_device *dev = CONTAINER_OF(aodev, *dev, aodev);
+ libxl__remus_drbd_disk *rdd = dev->concrete_data;
+
+ STATE_AO_GC(aodev->ao);
+
+ if (!WIFEXITED(status)) {
+ rc = ERROR_FAIL;
+ goto out;
+ }
+
+ rdd->ackwait = WEXITSTATUS(status);
+ rc = 0;
+
+out:
+ aodev->rc = rc;
+ aodev->callback(egc, aodev);
+}
+
+const libxl__remus_device_instance_ops remus_device_drbd_disk = {
+ .kind = LIBXL__DEVICE_KIND_VBD,
+ .setup = drbd_setup,
+ .teardown = drbd_teardown,
+ .postsuspend = drbd_postsuspend,
+ .preresume = drbd_preresume,
+};
--
1.9.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |