|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v4 10/10] x86: Support compiling out userspace IO (iopl and ioperm)
On the vast majority of modern systems, no processes will use the
userspsace IO syscalls, iopl and ioperm. Add a new config option,
CONFIG_X86_IOPORT, to support configuring them out of the kernel
entirely. Most current systems do not run programs using these
syscalls, so X86_IOPORT does not depend on EXPERT, though it does still
default to y.
In addition to saving a significant amount of space, this also reduces
the size of several major kernel data structures, drops a bit of code
from several task-related hot paths, and reduces the attack surface of
the kernel.
bloat-o-meter results:
add/remove: 0/4 grow/shrink: 4/9 up/down: 83/-9074 (-8991)
function old new delta
drop_fpu 80 160 +80
perf_event_init_task 638 639 +1
perf_event_exec 192 193 +1
perf_event_aux 132 133 +1
test_tsk_thread_flag 10 - -10
ioperm_active 14 3 -11
init_task 916 904 -12
flush_thread 168 149 -19
cpu_init 364 339 -25
__drop_fpu 60 - -60
ioperm_get 92 6 -86
exit_thread 105 10 -95
sys_iopl 106 - -106
copy_thread 364 257 -107
__switch_to_xtra 234 123 -111
sys_ioperm 240 - -240
init_tss 8576 384 -8192
Signed-off-by: Josh Triplett <josh@xxxxxxxxxxxxxxxx>
---
arch/x86/Kconfig | 10 ++++++++++
arch/x86/include/asm/paravirt.h | 2 ++
arch/x86/include/asm/paravirt_types.h | 4 ++++
arch/x86/include/asm/processor.h | 19 ++++++++++++++++++-
arch/x86/include/asm/syscalls.h | 3 +++
arch/x86/kernel/Makefile | 3 ++-
arch/x86/kernel/entry_64.S | 9 ++++++---
arch/x86/kernel/process-io.h | 10 ++++++++++
arch/x86/kernel/ptrace.c | 8 ++++++++
drivers/tty/vt/vt_ioctl.c | 2 +-
kernel/sys_ni.c | 5 +++++
11 files changed, 69 insertions(+), 6 deletions(-)
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index f2327e8..a7de2eb 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -984,6 +984,16 @@ config X86_ESPFIX64
def_bool y
depends on X86_16BIT && X86_64
+config X86_IOPORT
+ bool "iopl and ioperm system calls"
+ default y
+ ---help---
+ This option enables the iopl and ioperm system calls, which allow
+ privileged userspace processes to directly access I/O ports. This
+ is used by software that drives hardware directly from userspace
+ without using a kernel driver. Unless you intend to run such
+ software, you can safely say N here.
+
config TOSHIBA
tristate "Toshiba Laptop support"
depends on X86_32
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index cd6e161..52d2ec8 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -299,10 +299,12 @@ static inline void write_idt_entry(gate_desc *dt, int
entry, const gate_desc *g)
{
PVOP_VCALL3(pv_cpu_ops.write_idt_entry, dt, entry, g);
}
+#ifdef CONFIG_X86_IOPORT
static inline void set_iopl_mask(unsigned mask)
{
PVOP_VCALL1(pv_cpu_ops.set_iopl_mask, mask);
}
+#endif /* CONFIG_X86_IOPORT */
/* The paravirtualized I/O functions */
static inline void slow_down_io(void)
diff --git a/arch/x86/include/asm/paravirt_types.h
b/arch/x86/include/asm/paravirt_types.h
index 3caf2a8..a22a5d4 100644
--- a/arch/x86/include/asm/paravirt_types.h
+++ b/arch/x86/include/asm/paravirt_types.h
@@ -142,8 +142,12 @@ struct pv_cpu_ops {
void (*load_sp0)(struct tss_struct *tss, struct thread_struct *t);
+#ifdef CONFIG_X86_IOPORT
void (*set_iopl_mask)(unsigned mask);
#define INIT_SET_IOPL_MASK(f) .set_iopl_mask = f,
+#else
+#define INIT_SET_IOPL_MASK(f)
+#endif
void (*wbinvd)(void);
void (*io_delay)(void);
diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h
index 1fa78f7..6e0b639 100644
--- a/arch/x86/include/asm/processor.h
+++ b/arch/x86/include/asm/processor.h
@@ -255,7 +255,11 @@ struct x86_hw_tss {
/*
* IO-bitmap sizes:
*/
+#ifdef CONFIG_X86_IOPORT
#define IO_BITMAP_BITS 65536
+#else
+#define IO_BITMAP_BITS 0
+#endif
#define IO_BITMAP_BYTES (IO_BITMAP_BITS/8)
#define IO_BITMAP_LONGS (IO_BITMAP_BYTES/sizeof(long))
#define INVALID_IO_BITMAP_OFFSET 0x8000
@@ -269,6 +273,7 @@ struct tss_struct {
*/
struct x86_hw_tss x86_tss;
+#ifdef CONFIG_X86_IOPORT
/*
* The extra 1 is there because the CPU will access an
* additional byte beyond the end of the IO permission
@@ -276,6 +281,7 @@ struct tss_struct {
* be within the limit.
*/
unsigned long io_bitmap[IO_BITMAP_LONGS + 1];
+#endif /* CONFIG_X86_IOPORT */
/*
* .. and then another 0x100 bytes for the emergency kernel stack:
@@ -288,6 +294,7 @@ DECLARE_PER_CPU_SHARED_ALIGNED(struct tss_struct, init_tss);
static inline void init_tss_io(struct tss_struct *t)
{
+#ifdef CONFIG_X86_IOPORT
int i;
t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
@@ -298,6 +305,9 @@ static inline void init_tss_io(struct tss_struct *t)
*/
for (i = 0; i <= IO_BITMAP_LONGS; i++)
t->io_bitmap[i] = ~0UL;
+#else
+ t->x86_tss.io_bitmap_base = INVALID_IO_BITMAP_OFFSET;
+#endif
}
/*
@@ -524,11 +534,13 @@ struct thread_struct {
unsigned int saved_fs;
unsigned int saved_gs;
#endif
+#ifdef CONFIG_X86_IOPORT
/* IO permissions: */
unsigned long *io_bitmap_ptr;
unsigned long iopl;
/* Max allowed port in the bitmap, in bytes: */
unsigned io_bitmap_max;
+#endif /* CONFIG_X86_IOPORT */
/*
* fpu_counter contains the number of consecutive context switches
* that the FPU is used. If this is over a threshold, the lazy fpu
@@ -545,7 +557,7 @@ struct thread_struct {
*/
static inline void native_set_iopl_mask(unsigned mask)
{
-#ifdef CONFIG_X86_32
+#if defined(CONFIG_X86_IOPORT) && defined(CONFIG_X86_32)
unsigned int reg;
asm volatile ("pushfl;"
@@ -856,6 +868,7 @@ static inline void spin_lock_prefetch(const void *x)
#define STACK_TOP TASK_SIZE
#define STACK_TOP_MAX STACK_TOP
+#ifdef CONFIG_X86_IOPORT
#define INIT_THREAD_IO .io_bitmap_ptr = NULL,
/*
@@ -865,6 +878,10 @@ static inline void spin_lock_prefetch(const void *x)
* be within the limit.
*/
#define INIT_TSS_IO .io_bitmap = { [0 ... IO_BITMAP_LONGS] = ~0 },
+#else
+#define INIT_THREAD_IO
+#define INIT_TSS_IO
+#endif
#define INIT_THREAD { \
.sp0 = sizeof(init_stack) + (long)&init_stack, \
diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h
index 592a6a6..4db79ea 100644
--- a/arch/x86/include/asm/syscalls.h
+++ b/arch/x86/include/asm/syscalls.h
@@ -16,9 +16,12 @@
#include <linux/types.h>
/* Common in X86_32 and X86_64 */
+
+#ifdef CONFIG_X86_IOPORT
/* kernel/ioport.c */
asmlinkage long sys_ioperm(unsigned long, unsigned long, int);
asmlinkage long sys_iopl(unsigned int);
+#endif /* CONFIG_X86_IOPORT */
/* kernel/ldt.c */
asmlinkage int sys_modify_ldt(int, void __user *, unsigned long);
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 8f1e774..84d5fbe 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -20,7 +20,8 @@ CFLAGS_irq.o := -I$(src)/../include/asm/trace
obj-y := process_$(BITS).o signal.o entry_$(BITS).o
obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o
-obj-y += time.o ioport.o ldt.o dumpstack.o nmi.o
+obj-y += time.o ldt.o dumpstack.o nmi.o
+obj-$(CONFIG_X86_IOPORT) += ioport.o
obj-y += setup.o x86_init.o i8259.o irqinit.o jump_label.o
obj-$(CONFIG_IRQ_WORK) += irq_work.o
obj-y += probe_roms.o
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index df088bb..1e6a74e0 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -609,6 +609,11 @@ ENTRY(stub_\func)
END(stub_\func)
.endm
+ FORK_LIKE clone
+ FORK_LIKE fork
+ FORK_LIKE vfork
+
+#ifdef CONFIG_X86_IOPORT
.macro FIXED_FRAME label,func
ENTRY(\label)
CFI_STARTPROC
@@ -621,10 +626,8 @@ ENTRY(\label)
END(\label)
.endm
- FORK_LIKE clone
- FORK_LIKE fork
- FORK_LIKE vfork
FIXED_FRAME stub_iopl, sys_iopl
+#endif /* CONFIG_X86_IOPORT */
ENTRY(ptregscall_common)
DEFAULT_FRAME 1 8 /* offset 8: return address */
diff --git a/arch/x86/kernel/process-io.h b/arch/x86/kernel/process-io.h
index e48d5c9..3e773fa 100644
--- a/arch/x86/kernel/process-io.h
+++ b/arch/x86/kernel/process-io.h
@@ -3,12 +3,15 @@
static inline void clear_thread_io_bitmap(struct task_struct *p)
{
+#ifdef CONFIG_X86_IOPORT
p->thread.io_bitmap_ptr = NULL;
+#endif /* CONFIG_X86_IOPORT */
}
static inline int copy_io_bitmap(struct task_struct *me,
struct task_struct *p)
{
+#ifdef CONFIG_X86_IOPORT
if (unlikely(test_tsk_thread_flag(me, TIF_IO_BITMAP))) {
p->thread.io_bitmap_ptr = kmemdup(me->thread.io_bitmap_ptr,
IO_BITMAP_BYTES, GFP_KERNEL);
@@ -20,12 +23,14 @@ static inline int copy_io_bitmap(struct task_struct *me,
} else {
p->thread.io_bitmap_ptr = NULL;
}
+#endif /* CONFIG_X86_IOPORT */
return 0;
}
static inline void exit_thread_io(struct task_struct *me)
{
+#ifdef CONFIG_X86_IOPORT
struct thread_struct *t = &me->thread;
unsigned long *bp = t->io_bitmap_ptr;
@@ -42,11 +47,13 @@ static inline void exit_thread_io(struct task_struct *me)
put_cpu();
kfree(bp);
}
+#endif /* CONFIG_X86_IOPORT */
}
static inline void switch_iopl_mask(struct thread_struct *prev,
struct thread_struct *next)
{
+#ifdef CONFIG_X86_IOPORT
/*
* Restore IOPL if needed. In normal use, the flags restore
* in the switch assembly will handle this. But if the kernel
@@ -55,12 +62,14 @@ static inline void switch_iopl_mask(struct thread_struct
*prev,
*/
if (get_kernel_rpl() && unlikely(prev->iopl != next->iopl))
set_iopl_mask(next->iopl);
+#endif /* CONFIG_X86_IOPORT */
}
static inline void switch_io_bitmap(struct tss_struct *tss,
struct task_struct *prev_p,
struct task_struct *next_p)
{
+#ifdef CONFIG_X86_IOPORT
struct thread_struct *prev, *next;
prev = &prev_p->thread;
next = &next_p->thread;
@@ -78,6 +87,7 @@ static inline void switch_io_bitmap(struct tss_struct *tss,
*/
memset(tss->io_bitmap, 0xff, prev->io_bitmap_max);
}
+#endif /* CONFIG_X86_IOPORT */
}
#endif /* _X86_KERNEL_PROCESS_IO_H */
diff --git a/arch/x86/kernel/ptrace.c b/arch/x86/kernel/ptrace.c
index 749b0e4..fdb74a8 100644
--- a/arch/x86/kernel/ptrace.c
+++ b/arch/x86/kernel/ptrace.c
@@ -785,7 +785,11 @@ static int ptrace_set_debugreg(struct task_struct *tsk,
int n,
static int ioperm_active(struct task_struct *target,
const struct user_regset *regset)
{
+#ifdef CONFIG_X86_IOPORT
return target->thread.io_bitmap_max / regset->size;
+#else
+ return 0;
+#endif
}
static int ioperm_get(struct task_struct *target,
@@ -793,12 +797,16 @@ static int ioperm_get(struct task_struct *target,
unsigned int pos, unsigned int count,
void *kbuf, void __user *ubuf)
{
+#ifdef CONFIG_X86_IOPORT
if (!target->thread.io_bitmap_ptr)
return -ENXIO;
return user_regset_copyout(&pos, &count, &kbuf, &ubuf,
target->thread.io_bitmap_ptr,
0, IO_BITMAP_BYTES);
+#else
+ return -ENXIO;
+#endif
}
/*
diff --git a/drivers/tty/vt/vt_ioctl.c b/drivers/tty/vt/vt_ioctl.c
index 2bd78e2..7c7d405 100644
--- a/drivers/tty/vt/vt_ioctl.c
+++ b/drivers/tty/vt/vt_ioctl.c
@@ -410,7 +410,7 @@ int vt_ioctl(struct tty_struct *tty,
*
* XXX: you should never use these, just call ioperm directly..
*/
-#ifdef CONFIG_X86
+#ifdef CONFIG_X86_IOPORT
case KDADDIO:
case KDDELIO:
/*
diff --git a/kernel/sys_ni.c b/kernel/sys_ni.c
index 02aa418..f3014fe 100644
--- a/kernel/sys_ni.c
+++ b/kernel/sys_ni.c
@@ -224,3 +224,8 @@ cond_syscall(sys_seccomp);
/* access BPF programs and maps */
cond_syscall(sys_bpf);
+
+/* userspace I/O port access */
+cond_syscall(stub_iopl);
+cond_syscall(sys_iopl);
+cond_syscall(sys_ioperm);
--
2.1.1
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |