[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH] xen: arm: configure correct dom0_gnttab_start/size



On Thu, 2014-09-11 at 16:21 +0100, Ian Campbell wrote:

I think we should apply this workaround for 4.5 and do things properly
for 4.6. Any thoughts?

> Vexpress is currently failing to boot for me with:
> ------------[ cut here ]------------
> WARNING: CPU: 0 PID: 1 at arch/arm/mm/ioremap.c:301 
> __arm_ioremap_pfn_caller+0x118/0x1a4()
> CPU: 0 PID: 1 Comm: swapper Tainted: G        W     3.16.0-arm-native+ #276
> [<c0011e9c>] (unwind_backtrace) from [<c0010758>] (show_stack+0x10/0x14)
> [<c0010758>] (show_stack) from [<c001a3ec>] (warn_slowpath_common+0x5c/0x7c)
> [<c001a3ec>] (warn_slowpath_common) from [<c001a4c8>] 
> (warn_slowpath_null+0x18/0x20)
> [<c001a4c8>] (warn_slowpath_null) from [<c001488c>] 
> (__arm_ioremap_pfn_caller+0x118/0x1a4)
> [<c001488c>] (__arm_ioremap_pfn_caller) from [<c00149a0>] 
> (__arm_ioremap+0x14/0x20)
> [<c00149a0>] (__arm_ioremap) from [<c01d103c>] 
> (gnttab_setup_auto_xlat_frames+0x30/0xdc)
> [<c01d103c>] (gnttab_setup_auto_xlat_frames) from [<c0495324>] 
> (xen_guest_init+0x19c/0x2d4)
> [<c0495324>] (xen_guest_init) from [<c0492c6c>] (do_one_initcall+0xfc/0x1a4)
> [<c0492c6c>] (do_one_initcall) from [<c0492d6c>] 
> (kernel_init_freeable+0x58/0x1b4)
> [<c0492d6c>] (kernel_init_freeable) from [<c039611c>] (kernel_init+0x8/0xe4)
> [<c039611c>] (kernel_init) from [<c000de58>] (ret_from_fork+0x14/0x3c)
> ---[ end trace 3406ff24bd97382f ]---
> xen:grant_table: Failed to ioremap gnttab share frames 
> (addr=0x00000000b0000000)!
> 
> which is:
>         /*
>          * Don't allow RAM to be mapped - this causes problems with ARMv6+
>          */
>         if (WARN_ON(pfn_valid(pfn)))
>                 return NULL;
> 
> This makes sense since the gnttab defaults to 0xb000000 and my dom0
> is being allocated a 1:1 mapping at 0xa0000000-0xc0000000.
> 
> I suspect this broke around the time we stopped forcing dom0 memory to be
> allocated as low as possible which happened to prevent the default dom0_gnttab
> region overlapping RAM.
> 
> This patch specifies an explicit dom0_gnttab base which is explicitly unused
> according to the FVP model docs (although it correpsonds to CS5 this isn't
> wired up to anything).
> 
> Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
> ---
> This just fixes vexpress, I wonder if a followup patch should either remove 
> the
> default dom0_gnttab (forcing all platforms to specify one explicitly) or make
> the default something less arbitrary than 0xb0000000, e.g. 0x0-0x20000 or
> 0xfffe0000-0x100000000 (very start or very end of RAM). Perhaps with a command
> line option to override for new platform hacking.
> 
> Or maybe we should search for an unused hole in the dom0 RAM space?
> ---
>  xen/arch/arm/platforms/vexpress.c |    2 ++
>  1 file changed, 2 insertions(+)
> 
> diff --git a/xen/arch/arm/platforms/vexpress.c 
> b/xen/arch/arm/platforms/vexpress.c
> index 8e6a4ea..ce66935 100644
> --- a/xen/arch/arm/platforms/vexpress.c
> +++ b/xen/arch/arm/platforms/vexpress.c
> @@ -176,6 +176,8 @@ PLATFORM_START(vexpress, "VERSATILE EXPRESS")
>  #endif
>      .reset = vexpress_reset,
>      .blacklist_dev = vexpress_blacklist_dev,
> +    .dom0_gnttab_start = 0x10000000,
> +    .dom0_gnttab_size = 0x20000,
>  PLATFORM_END
>  
>  /*



_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.