[Xen-devel] [PATCH v2] xen: arm32: reduce default size of the xenheap

[Ian Campbell <ian.campbell@xxxxxxxxxx>]

... and make it tunable via the command line.

1/8 of RAM is 128M on a 1GB system and 256M on a 2GB system etc,
which is a lot. 1/32 of RAM seems more reasonable. Also drop the
minimum to 32M.

Leave the maximum at 1GB.

Signed-off-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Cc: Jintack Lim <jintack@xxxxxxxxxxxxxxx>
Cc: Jan Beulich <JBeulich@xxxxxxxx>
---
v2:
 - Use xenheap_megabytes as the option, which is what older x86 Xen
   used.

I'd like to backport at least the command line option to 4.5. Reducing
the default heap size is a bit border line but I'm inclined to take
it.
---
 docs/misc/xen-command-line.markdown |    8 ++++++++
 xen/arch/arm/setup.c                |   25 ++++++++++++++++++-------
 2 files changed, 26 insertions(+), 7 deletions(-)

diff --git a/docs/misc/xen-command-line.markdown 
b/docs/misc/xen-command-line.markdown
index bc316be..0a99d1a 100644
--- a/docs/misc/xen-command-line.markdown
+++ b/docs/misc/xen-command-line.markdown
@@ -237,6 +237,14 @@ and not running softirqs. Reduce this if softirqs are not 
being run frequently
 enough. Setting this to a high value may cause boot failure, particularly if
 the NMI watchdog is also enabled.
 
+### xenheap\_megabytes (arm32)
+> `= <size>`
+
+> Default: `1/32 RAM`
+
+Amount of RAM to set aside for the Xenheap. By default 1/32 of the RAM
+up to a maximum of 1GB and with a minimum of 32M.
+
 ### clocksource
 > `= pit | hpet | acpi`
 
diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c
index a916ca6..73691c0 100644
--- a/xen/arch/arm/setup.c
+++ b/xen/arch/arm/setup.c
@@ -50,6 +50,11 @@ struct bootinfo __initdata bootinfo;
 
 struct cpuinfo_arm __read_mostly boot_cpu_data;
 
+#ifdef CONFIG_ARM_32
+static unsigned long opt_xenheap_megabytes __initdata;
+integer_param("xenheap_megabytes", opt_xenheap_megabytes);
+#endif
+
 static __used void init_done(void)
 {
     free_init_memory();
@@ -501,16 +506,21 @@ static void __init setup_mm(unsigned long dtb_paddr, 
size_t dtb_size)
      *
      *  - must be 32 MiB aligned
      *  - must not include Xen itself or the boot modules
-     *  - must be at most 1GB or 1/8 the total RAM in the system if less
-     *  - must be at least 128M
+     *  - must be at most 1GB or 1/32 the total RAM in the system if less
+     *  - must be at least 32M
      *
      * We try to allocate the largest xenheap possible within these
      * constraints.
      */
     heap_pages = ram_pages;
-    xenheap_pages = (heap_pages/8 + 0x1fffUL) & ~0x1fffUL;
-    xenheap_pages = max(xenheap_pages, 128UL<<(20-PAGE_SHIFT));
-    xenheap_pages = min(xenheap_pages, 1UL<<(30-PAGE_SHIFT));
+    if ( opt_xenheap_megabytes )
+        xenheap_pages = opt_xenheap_megabytes << (20-PAGE_SHIFT);
+    else
+    {
+        xenheap_pages = (heap_pages/32 + 0x1fffUL) & ~0x1fffUL;
+        xenheap_pages = max(xenheap_pages, 32UL<<(20-PAGE_SHIFT));
+        xenheap_pages = min(xenheap_pages, 1UL<<(30-PAGE_SHIFT));
+    }
 
     do
     {
@@ -528,8 +538,9 @@ static void __init setup_mm(unsigned long dtb_paddr, size_t 
dtb_size)
 
     domheap_pages = heap_pages - xenheap_pages;
 
-    printk("Xen heap: %"PRIpaddr"-%"PRIpaddr" (%lu pages)\n",
-            e - (pfn_to_paddr(xenheap_pages)), e, xenheap_pages);
+    printk("Xen heap: %"PRIpaddr"-%"PRIpaddr" (%lu pages%s)\n",
+           e - (pfn_to_paddr(xenheap_pages)), e, xenheap_pages,
+           opt_xenheap_megabytes ? ", from command-line" : "");
     printk("Dom heap: %lu pages\n", domheap_pages);
 
     setup_xenheap_mappings((e >> PAGE_SHIFT) - xenheap_pages, xenheap_pages);
-- 
1.7.10.4


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel