[Xen-devel] [PATCH v1 2/2] xen/arm: Add Xilinx ZynqMP early printk support

["Edgar E. Iglesias" <edgar.iglesias@xxxxxxxxx>]

From: "Edgar E. Iglesias" <edgar.iglesias@xxxxxxxxxx>

Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xxxxxxxxxx>
---
 docs/misc/arm/early-printk.txt       |  1 +
 xen/arch/arm/Rules.mk                |  6 +++++
 xen/arch/arm/arm64/debug-cadence.inc | 45 ++++++++++++++++++++++++++++++++++++
 3 files changed, 52 insertions(+)
 create mode 100644 xen/arch/arm/arm64/debug-cadence.inc

diff --git a/docs/misc/arm/early-printk.txt b/docs/misc/arm/early-printk.txt
index 1ca2a55..537e15d 100644
--- a/docs/misc/arm/early-printk.txt
+++ b/docs/misc/arm/early-printk.txt
@@ -20,6 +20,7 @@ where mach is the name of the machine:
   - hip04-d01: printk with 8250 on HiSilicon Hip-04 D01
   - seattle: printk with pl011 for AMD Seattle processor
   - lager: printk with SCIF0 on Renesas R-Car H2 processors
+  - zynqmp: printk with Cadence UART for Xilinx ZynqMP SoCs
 
 The base address and baud rate is hardcoded in xen/arch/arm/Rules.mk,
 see there when adding support for new machines.
diff --git a/xen/arch/arm/Rules.mk b/xen/arch/arm/Rules.mk
index c7bd227..649de49 100644
--- a/xen/arch/arm/Rules.mk
+++ b/xen/arch/arm/Rules.mk
@@ -114,6 +114,12 @@ EARLY_PRINTK_INC := scif
 EARLY_UART_BASE_ADDRESS := 0xe6e60000
 endif
 
+ifeq ($(CONFIG_EARLY_PRINTK), zynqmp)
+EARLY_PRINTK_INC := cadence
+EARLY_PRINTK_BAUD := 115200
+EARLY_UART_BASE_ADDRESS := 0xff000000
+endif
+
 ifneq ($(EARLY_PRINTK_INC),)
 EARLY_PRINTK := y
 endif
diff --git a/xen/arch/arm/arm64/debug-cadence.inc 
b/xen/arch/arm/arm64/debug-cadence.inc
new file mode 100644
index 0000000..84dee4c
--- /dev/null
+++ b/xen/arch/arm/arm64/debug-cadence.inc
@@ -0,0 +1,45 @@
+/*
+ * xen/arch/arm/arm64/debug-cadence.S
+ *
+ * Cadence UART specific debug code
+ *
+ * Copyright (c) 2015 Xilinx Inc.
+ * Written by Edgar E. Iglesias.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#include <asm/asm_defns.h>
+#include <asm/cadence-uart.h>
+
+/* Cadence UART wait UART to be ready to transmit
+ * xb: register which contains the UART base address
+ * c: scratch register number */
+.macro early_uart_ready xb, c
+1:
+        ldrh  w\c, [\xb, #R_UART_SR]
+        tst   w\c, #UART_SR_INTR_TFUL
+        b.ne  1b
+.endm
+
+/* Cadence UART transmit character
+ * xb: register which contains the UART base address
+ * wt: register which contains the character to transmit */
+.macro early_uart_transmit xb, wt
+        strb  \wt, [\xb, #R_UART_TX]
+.endm
+
+/*
+ * Local variables:
+ * mode: ASM
+ * indent-tabs-mode: nil
+ * End:
+ */
-- 
1.9.1


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel