[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] Failed to launch xen on J6 evm



Hi

 

I am using J6 evm.

 

Tried to launch xen and it fails after reporting starting kernel.

I tried to change the load addresses and

played with couple different u-boots and file system images…but still on square 1.

 

I would like to know if this is a known issue with J6 EVM and

If there are any probable fixes/hints for bringing up XEN on J6 evm.

 

Here is the boot log where it hangs…

 

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 

 

U-Boot SPL 2013.04 (Sep 24 2014 - 00:00:28)

DRA752 ES1.1

OMAP SD/MMC: 0

reading u-boot.img

reading u-boot.img

 

 

U-Boot 2013.04 (Sep 24 2014 - 00:00:28)

 

CPU  : DRA752 ES1.1

Board: DRA7xx

I2C:   ready

DRAM:  1.5 GiB

WARNING: Caches not enabled

MMC:   OMAP SD/MMC: 0, OMAP SD/MMC: 1

Using default environment

 

In:    serial

Out:   serial

Err:   serial

Net:   <ethaddr> not set. Validating first E-fuse MAC

cpsw

Hit any key to stop autoboot:  0

 

..

..

setenv dtb_addr_r 0x825f0000

setenv xen_addr_r 0x90000000

setenv kernel_addr_r 0xa0000000

..

..

 

fatload mmc 0:1 $dtb_addr_r dra7-evm.dtb

fatload mmc 0:1 $xen_addr_r xenuImage

..

..

 

DRA752 EVM # fdt print /chosen

chosen {

        xen,dom0-bootargs = "console=hvc0 root=/dev/mmcblk0p2 rw rootwait fixrtc";

        xen,xen-bootargs = "dom0_mem=128M sync_console console=dtuart dtuart=serial2 noreboot";

        #size-cells = <0x00000001>;

        #address-cells = <0x00000001>;

        module@0 {

                reg = <0xa0000000 0x004b0000>;

                compatible = "xen,linux-zimage", "xen,multiboot-module";

        };

};

 

 

DRA752 EVM # bootm $xen_addr_r - $dtb_addr_r

## Booting kernel from Legacy Image at 90000000 ...

   Image Name:   Xen.Trial.12

   Image Type:   ARM Linux Kernel Image (uncompressed)

   Data Size:    754524 Bytes = 736.8 KiB

   Load Address: 80008000

   Entry Point:  80008000

   Verifying Checksum ... OK

## Flattened Device Tree blob at 825f0000

   Booting using the fdt blob at 0x825f0000

   Loading Kernel Image ... OK

OK

   reserving fdt memory region: addr=825f0000 size=17000

   Loading Device Tree to 83fe6000, end 83ffffff ... OK

 

Starting kernel ...

 

>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> 

 

Thanks

Naveen Korupol

 

Panasonic Automotive Systems Company of America

Panasonic Corporation of North America
37101 Corporate Drive,
Farmington Hills, MI 48331

T 248.324.6737
F 248.324.6893
korupoln@xxxxxxxxxxxxxxxx

 

 

 

Please note my new email address Naveen.Korupol@xxxxxxxxxxxxxxxxxxxxx The old address will be available until September 15, 2015.
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel

 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.