[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v1 09/47] vidoe: fbdev: atyfb: remove and fix MTRR MMIO "hole" work around



On Fri, Mar 20, 2015 at 04:17:59PM -0700, Luis R. Rodriguez wrote:
> diff --git a/drivers/video/fbdev/aty/atyfb_base.c 
> b/drivers/video/fbdev/aty/atyfb_base.c
> index 8025624..8875e56 100644
> --- a/drivers/video/fbdev/aty/atyfb_base.c
> +++ b/drivers/video/fbdev/aty/atyfb_base.c
> @@ -2630,21 +2630,10 @@ static int aty_init(struct fb_info *info)
>  
>  #ifdef CONFIG_MTRR
>       par->mtrr_aper = -1;
> -     par->mtrr_reg = -1;
>       if (!nomtrr) {
> -             /* Cover the whole resource. */
> -             par->mtrr_aper = mtrr_add(par->res_start, par->res_size,
> +             par->mtrr_aper = mtrr_add(info->fix.smem_start,
> +                                       info->fix.smem_len,
>                                         MTRR_TYPE_WRCOMB, 1);

MTRRs need power of two size, so how is this supposed to work?

> -             if (par->mtrr_aper >= 0 && !par->aux_start) {
> -                     /* Make a hole for mmio. */
> -                     par->mtrr_reg = mtrr_add(par->res_start + 0x800000 -
> -                                              GUI_RESERVE, GUI_RESERVE,
> -                                              MTRR_TYPE_UNCACHABLE, 1);
> -                     if (par->mtrr_reg < 0) {
> -                             mtrr_del(par->mtrr_aper, 0, 0);
> -                             par->mtrr_aper = -1;
> -                     }
> -             }
>       }
>  #endif
>  
> @@ -2776,10 +2765,6 @@ aty_init_exit:
>       par->pll_ops->set_pll(info, &par->saved_pll);
>  
>  #ifdef CONFIG_MTRR
> -     if (par->mtrr_reg >= 0) {
> -             mtrr_del(par->mtrr_reg, 0, 0);
> -             par->mtrr_reg = -1;
> -     }
>       if (par->mtrr_aper >= 0) {
>               mtrr_del(par->mtrr_aper, 0, 0);
>               par->mtrr_aper = -1;
> @@ -3466,7 +3451,7 @@ static int atyfb_setup_generic(struct pci_dev *pdev, 
> struct fb_info *info,
>       }
>  
>       info->fix.mmio_start = raddr;
> -     par->ati_regbase = ioremap(info->fix.mmio_start, 0x1000);
> +     par->ati_regbase = ioremap_nocache(info->fix.mmio_start, 0x1000);
>       if (par->ati_regbase == NULL)
>               return -ENOMEM;
>  
> @@ -3491,6 +3476,8 @@ static int atyfb_setup_generic(struct pci_dev *pdev, 
> struct fb_info *info,
>       info->fix.smem_start = addr;
>       info->fix.smem_len = 0x800000;
>  
> +     aty_fudge_framebuffer_len(info);
> +
>       info->screen_base = ioremap(info->fix.smem_start, info->fix.smem_len);
>       if (info->screen_base == NULL) {
>               ret = -ENOMEM;
> @@ -3563,6 +3550,7 @@ static int atyfb_pci_probe(struct pci_dev *pdev,
>               return -ENOMEM;
>       }
>       par = info->par;
> +     par->bus_type = PCI;
>       info->fix = atyfb_fix;
>       info->device = &pdev->dev;
>       par->pci_id = pdev->device;
> @@ -3732,10 +3720,6 @@ static void atyfb_remove(struct fb_info *info)
>  #endif
>  
>  #ifdef CONFIG_MTRR
> -     if (par->mtrr_reg >= 0) {
> -             mtrr_del(par->mtrr_reg, 0, 0);
> -             par->mtrr_reg = -1;
> -     }
>       if (par->mtrr_aper >= 0) {
>               mtrr_del(par->mtrr_aper, 0, 0);
>               par->mtrr_aper = -1;
> -- 
> 2.3.2.209.gd67f9d5.dirty
> 
> --
> To unsubscribe from this list: send the line "unsubscribe linux-fbdev" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ville Syrjälä
syrjala@xxxxxx
http://www.sci.fi/~syrjala/

_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.