[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Xen-devel] [PATCH V2] xen: arm: X-Gene Storm check GIC DIST address for EOI quirk



In old X-Gene Storm firmware and DT, secure mode addresses have been
mentioned in GICv2 node. In this case maintenance interrupt is used
instead of EOI HW method.

This patch checks the GIC Distributor Base Address to enable EOI quirk
for old firmware.

Ref:
http://lists.xen.org/archives/html/xen-devel/2014-07/msg01263.html

ChangeLog:

V2:
- Fine tune interrupt controller node search as per comments on V1 patch
- Incorporating other misc comments on V1.
V1:
- Initial patch.

Tested-by: Christoffer Dall <christoffer.dall@xxxxxxxxxx>
Signed-off-by: Pranavkumar Sawargaonkar <pranavkumar@xxxxxxxxxx>
---
 xen/arch/arm/platforms/xgene-storm.c |   42 +++++++++++++++++++++++++++++++++-
 1 file changed, 41 insertions(+), 1 deletion(-)

diff --git a/xen/arch/arm/platforms/xgene-storm.c 
b/xen/arch/arm/platforms/xgene-storm.c
index 1812e5b..c9a6dfc 100644
--- a/xen/arch/arm/platforms/xgene-storm.c
+++ b/xen/arch/arm/platforms/xgene-storm.c
@@ -22,6 +22,7 @@
 #include <asm/platform.h>
 #include <xen/stdbool.h>
 #include <xen/vmap.h>
+#include <xen/device_tree.h>
 #include <asm/io.h>
 #include <asm/gic.h>
 
@@ -35,9 +36,46 @@ static u64 reset_addr, reset_size;
 static u32 reset_mask;
 static bool reset_vals_valid = false;
 
+#define XGENE_SEC_GICV2_DIST_ADDR    0x78010000
+static u32 __read_mostly xgene_quirks = PLATFORM_QUIRK_GIC_64K_STRIDE;
+
+static void __init xgene_check_pirq_eoi(void)
+{
+    struct dt_device_node *node;
+    int res;
+    paddr_t dbase;
+    static const struct dt_device_match xgene_dt_int_ctrl_match[] =
+    {
+        DT_MATCH_COMPATIBLE("arm,cortex-a15-gic"),
+        { /*sentinel*/ },
+    };
+
+    node = dt_find_interrupt_controller(xgene_dt_int_ctrl_match);
+    if ( !node )
+        panic("%s: Can not find interrupt controller node\n", __func__);
+
+    res = dt_device_get_address(node, 0, &dbase, NULL);
+    if ( !dbase )
+        panic("%s: Cannot find a valid address for the "
+                "distributor", __func__);
+
+    /*
+     * In old X-Gene Storm firmware and DT, secure mode addresses have
+     * been mentioned in GICv2 node. We have to use maintenance interrupt
+     * instead of EOI HW in this case. We check the GIC Distributor Base
+     * Address to maintain compatibility with older firmware.
+     */
+    if ( dbase == XGENE_SEC_GICV2_DIST_ADDR )
+    {
+        xgene_quirks |= PLATFORM_QUIRK_GUEST_PIRQ_NEED_EOI;
+        printk("Xen: warning: Using OLD X-Gene Firmware,"
+                "disabling PIRQ EOI mode ...\n");
+    }
+}
+
 static uint32_t xgene_storm_quirks(void)
 {
-    return PLATFORM_QUIRK_GIC_64K_STRIDE|PLATFORM_QUIRK_GUEST_PIRQ_NEED_EOI;
+    return xgene_quirks;
 }
 
 static int map_one_mmio(struct domain *d, const char *what,
@@ -216,6 +254,8 @@ static int xgene_storm_init(void)
     reset_mask = XGENE_RESET_MASK;
 
     reset_vals_valid = true;
+    xgene_check_pirq_eoi();
+
     return 0;
 }
 
-- 
1.7.9.5


_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel


 


Rackspace

Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.