|
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH] xen/arm: gic-hip04: Resync the driver with the GICv2
The GIC hip04 driver was differring from GICv2. I suspect that some of
the changes in the common GIC code make boot fail on hip04. Although, I
don't have a platform to check so it has been only build tested.
List of GICv2 commit ported to the HIP04:
commit ce12e6dba4b2d120e35dffd95a745452224e7144
Author: Edgar E. Iglesias <edgar.iglesias@xxxxxxxxxx>
Date: Fri Apr 10 16:21:10 2015 +1000
xen/arm: Don't write to GICH_MISR
GICH_MISR is read-only in GICv2.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xxxxxxxxxx>
Reviewed-by: Julien Grall <julien.grall@xxxxxxxxxx>
Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
commit 2eb4f996547dc632aa94b2b7b4f783bec8ffe457
Author: Julien Grall <julien.grall@xxxxxxxxxx>
Date: Wed Apr 1 17:21:47 2015 +0100
xen/arm: gic: GICv2 & GICv3 only supports 1020 physical interrupts
GICD_TYPER.ITLinesNumber can encode up to 1024 interrupts. Although,
IRQ 1020-1023 are reserved for special purpose.
The result is used by the callers of gic_number_lines in order to check
the validity of an IRQ.
Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Cc: Frediano Ziglio <frediano.ziglio@xxxxxxxxxx>
Cc: Zoltan Kiss <zoltan.kiss@xxxxxxxxxx>
commit e2d486b385ce58b6db7561417de28ba837dcd4ac
Author: Julien Grall <julien.grall@xxxxxxxxxx>
Date: Wed Apr 1 17:21:34 2015 +0100
xen/arm: Divide GIC initialization in 2 parts
Currently the function to translate IRQ from the device tree is set
unconditionally to be able to be able to retrieve serial/timer IRQ
before the GIC has been initialized.
It assumes that the xlate function won't ever changed. We may also need
to have the primary interrupt controller very early.
Rework the gic initialization in 2 parts:
- gic_preinit: Get the interrupt controller device tree node and
set up GIC and xlate callbacks
- gic_init: Initialize the interrupt controller and the boot CPU
interrupts.
The former function will be called just after the IRQ subsystem as been
initialized.
Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
Acked-by: Stefano Stabellini <stefano.stabellini@xxxxxxxxxxxxx>
Acked-by: Ian Campbell <ian.campbell@xxxxxxxxxx>
Cc: Frediano Ziglio <frediano.ziglio@xxxxxxxxxx>
Cc: Zoltan Kiss <zoltan.kiss@xxxxxxxxxx>
Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx>
Cc: Zoltan Kiss <zoltan.kiss@xxxxxxxxxx>
---
So far I've got no news about previous changes in the GIC [1] applied in
April... Since then the driver is likely broken and would prevent Xen to
boot on a supported platform. This patch is trying to fix it even though
I don't have a board to test.
It's a prerequisite for an upcoming series which update/rework the
vGICv2 drivers and will impact the GICv2 drivers (~10 patches).
I'm concerned to see a newly driver (pushed last march) already orphan.
Does Huawei still plan to maintain this driver?
[1] http://lists.xenproject.org/archives/html/xen-devel/2015-03/msg02465.html
---
xen/arch/arm/gic-hip04.c | 89 ++++++++++++++++++++++++++----------------------
1 file changed, 48 insertions(+), 41 deletions(-)
diff --git a/xen/arch/arm/gic-hip04.c b/xen/arch/arm/gic-hip04.c
index 073ad33..efdccdb 100644
--- a/xen/arch/arm/gic-hip04.c
+++ b/xen/arch/arm/gic-hip04.c
@@ -267,6 +267,7 @@ static void __init hip04gic_dist_init(void)
uint32_t type;
uint32_t cpumask;
uint32_t gic_cpus;
+ unsigned int nr_lines;
int i;
cpumask = readl_gicd(GICD_ITARGETSR) & 0xffff;
@@ -276,31 +277,34 @@ static void __init hip04gic_dist_init(void)
writel_gicd(0, GICD_CTLR);
type = readl_gicd(GICD_TYPER);
- gicv2_info.nr_lines = 32 * ((type & GICD_TYPE_LINES) + 1);
+ nr_lines = 32 * ((type & GICD_TYPE_LINES) + 1);
gic_cpus = 16;
printk("GIC-HIP04: %d lines, %d cpu%s%s (IID %8.8x).\n",
- gicv2_info.nr_lines, gic_cpus, (gic_cpus == 1) ? "" : "s",
+ nr_lines, gic_cpus, (gic_cpus == 1) ? "" : "s",
(type & GICD_TYPE_SEC) ? ", secure" : "",
readl_gicd(GICD_IIDR));
/* Default all global IRQs to level, active low */
- for ( i = 32; i < gicv2_info.nr_lines; i += 16 )
+ for ( i = 32; i < nr_lines; i += 16 )
writel_gicd(0x0, GICD_ICFGR + (i / 16) * 4);
/* Route all global IRQs to this CPU */
- for ( i = 32; i < gicv2_info.nr_lines; i += 2 )
+ for ( i = 32; i < nr_lines; i += 2 )
writel_gicd(cpumask, GICD_ITARGETSR + (i / 2) * 4);
/* Default priority for global interrupts */
- for ( i = 32; i < gicv2_info.nr_lines; i += 4 )
+ for ( i = 32; i < nr_lines; i += 4 )
writel_gicd(GIC_PRI_IRQ << 24 | GIC_PRI_IRQ << 16 |
GIC_PRI_IRQ << 8 | GIC_PRI_IRQ,
GICD_IPRIORITYR + (i / 4) * 4);
/* Disable all global interrupts */
- for ( i = 32; i < gicv2_info.nr_lines; i += 32 )
+ for ( i = 32; i < nr_lines; i += 32 )
writel_gicd(~0x0, GICD_ICENABLER + (i / 32) * 4);
+ /* Only 1020 interrupts are supported */
+ gicv2_info.nr_lines = min(1020U, nr_lines);
+
/* Turn on the distributor */
writel_gicd(GICD_CTL_ENABLE, GICD_CTLR);
}
@@ -351,8 +355,6 @@ static void __cpuinit hip04gic_hyp_init(void)
vtr = readl_gich(GICH_VTR);
nr_lrs = (vtr & GICH_V2_VTR_NRLRGS) + 1;
gicv2_info.nr_lrs = nr_lrs;
-
- writel_gich(GICH_MISR_EOI, GICH_MISR);
}
static void __cpuinit hip04gic_hyp_disable(void)
@@ -688,37 +690,10 @@ static hw_irq_controller hip04gic_guest_irq_type = {
.set_affinity = hip04gic_irq_set_affinity,
};
-const static struct gic_hw_operations hip04gic_ops = {
- .info = &gicv2_info,
- .secondary_init = hip04gic_secondary_cpu_init,
- .save_state = hip04gic_save_state,
- .restore_state = hip04gic_restore_state,
- .dump_state = hip04gic_dump_state,
- .gicv_setup = hip04gicv_setup,
- .gic_host_irq_type = &hip04gic_host_irq_type,
- .gic_guest_irq_type = &hip04gic_guest_irq_type,
- .eoi_irq = hip04gic_eoi_irq,
- .deactivate_irq = hip04gic_dir_irq,
- .read_irq = hip04gic_read_irq,
- .set_irq_properties = hip04gic_set_irq_properties,
- .send_SGI = hip04gic_send_SGI,
- .disable_interface = hip04gic_disable_interface,
- .update_lr = hip04gic_update_lr,
- .update_hcr_status = hip04gic_hcr_status,
- .clear_lr = hip04gic_clear_lr,
- .read_lr = hip04gic_read_lr,
- .write_lr = hip04gic_write_lr,
- .read_vmcr_priority = hip04gic_read_vmcr_priority,
- .read_apr = hip04gic_read_apr,
- .make_dt_node = hip04gic_make_dt_node,
-};
-
-/* Set up the GIC */
-static int __init hip04gic_init(struct dt_device_node *node, const void *data)
+static int __init hip04gic_init(void)
{
int res;
-
- dt_device_set_used_by(node, DOMID_XEN);
+ const struct dt_device_node *node = gicv2_info.node;
res = dt_device_get_address(node, 0, &gicv2.dbase, NULL);
if ( res || !gicv2.dbase || (gicv2.dbase & ~PAGE_MASK) )
@@ -741,9 +716,6 @@ static int __init hip04gic_init(struct dt_device_node
*node, const void *data)
panic("GIC-HIP04: Cannot find the maintenance IRQ");
gicv2_info.maintenance_irq = res;
- /* Set the GIC as the primary interrupt controller */
- dt_interrupt_controller = node;
-
/* TODO: Add check on distributor, cpu size */
printk("GIC-HIP04 initialization:\n"
@@ -788,8 +760,43 @@ static int __init hip04gic_init(struct dt_device_node
*node, const void *data)
spin_unlock(&gicv2.lock);
+ return 0;
+}
+
+const static struct gic_hw_operations hip04gic_ops = {
+ .info = &gicv2_info,
+ .init = hip04gic_init,
+ .secondary_init = hip04gic_secondary_cpu_init,
+ .save_state = hip04gic_save_state,
+ .restore_state = hip04gic_restore_state,
+ .dump_state = hip04gic_dump_state,
+ .gicv_setup = hip04gicv_setup,
+ .gic_host_irq_type = &hip04gic_host_irq_type,
+ .gic_guest_irq_type = &hip04gic_guest_irq_type,
+ .eoi_irq = hip04gic_eoi_irq,
+ .deactivate_irq = hip04gic_dir_irq,
+ .read_irq = hip04gic_read_irq,
+ .set_irq_properties = hip04gic_set_irq_properties,
+ .send_SGI = hip04gic_send_SGI,
+ .disable_interface = hip04gic_disable_interface,
+ .update_lr = hip04gic_update_lr,
+ .update_hcr_status = hip04gic_hcr_status,
+ .clear_lr = hip04gic_clear_lr,
+ .read_lr = hip04gic_read_lr,
+ .write_lr = hip04gic_write_lr,
+ .read_vmcr_priority = hip04gic_read_vmcr_priority,
+ .read_apr = hip04gic_read_apr,
+ .make_dt_node = hip04gic_make_dt_node,
+};
+
+/* Set up the GIC */
+static int __init hip04gic_preinit(struct dt_device_node *node,
+ const void *data)
+{
gicv2_info.hw_version = GIC_V2;
+ gicv2_info.node = node;
register_gic_ops(&hip04gic_ops);
+ dt_irq_xlate = gic_irq_xlate;
return 0;
}
@@ -802,7 +809,7 @@ static const struct dt_device_match hip04gic_dt_match[]
__initconst =
DT_DEVICE_START(hip04gic, "GIC-HIP04", DEVICE_GIC)
.dt_match = hip04gic_dt_match,
- .init = hip04gic_init,
+ .init = hip04gic_preinit,
DT_DEVICE_END
/*
--
2.1.4
_______________________________________________
Xen-devel mailing list
Xen-devel@xxxxxxxxxxxxx
http://lists.xen.org/xen-devel
|
 |
Lists.xenproject.org is hosted with RackSpace, monitoring our |