[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index] [Xen-devel] [PATCH v8 1/6] tools/libxl: Check if fdt_{first, next}_subnode are present in libfdt
From: Julien Grall <julien.grall@xxxxxxxxxx> The functions fdt_{fisrt,next}_subnode may not be available because: * It has been introduced in 2013 => Doesn't work on Wheezy * The prototype exists but the functions are not exposed. Don't ask why... The later has been fixed recently in the dtc repo [1] When the functions are not available, implement our own in order to use them in a following patch. [1] git://git.kernel.org/pub/scm/utils/dtc/dtc.git commit a4b093f7366fdb429ca1781144d3985fa50d0fbb Signed-off-by: Julien Grall <julien.grall@xxxxxxxxxx> Signed-off-by: Ian Jackson <ian.jackson@xxxxxxxxxxxxx> Cc: Wei Liu <wei.liu2@xxxxxxxxxx> --- tools/configure needs to be regenerate as this patch is modifying tools/configure.ac Changes in v8: - Forgot to add the new header file libxl_libfdt_compat.h on the previous version Changes in v7: - Drop Ian's ack as he request some changes due to build issue - Check if the declaration are present if not add declaration - Remove changes config.h.in as it will be regenerate before committed Changes in v6: - Add Ian's Ack Changes in v5: - Add Ian's Signed-off-by for the license part and update the license - Rename libxl_fdt to libxl_libfdt_compat.c Changes in v4: - Patch added --- tools/configure.ac | 6 +++ tools/libxl/Makefile | 2 +- tools/libxl/libxl_internal.h | 1 + tools/libxl/libxl_libfdt_compat.c | 94 +++++++++++++++++++++++++++++++++++++++ tools/libxl/libxl_libfdt_compat.h | 80 +++++++++++++++++++++++++++++++++ 5 files changed, 182 insertions(+), 1 deletion(-) create mode 100644 tools/libxl/libxl_libfdt_compat.c create mode 100644 tools/libxl/libxl_libfdt_compat.h diff --git a/tools/configure.ac b/tools/configure.ac index d31c2f3..5b48ab2 100644 --- a/tools/configure.ac +++ b/tools/configure.ac @@ -355,6 +355,12 @@ AC_SUBST(libiconv) case "$host_cpu" in arm*|aarch64) AC_CHECK_LIB([fdt], [fdt_create], [], [AC_MSG_ERROR([Could not find libfdt])]) + +# The functions fdt_{first,next}_subnode may not be available because: +# * It has been introduced in 2013 => Doesn't work on Wheezy +# * The prototype exists but the functions are not exposed. Don't ask why... +AC_CHECK_FUNCS([fdt_first_subnode fdt_next_subnode]) +AC_CHECK_DECLS([fdt_first_subnode, fdt_next_subnode],,,[#include <libfdt.h>]) esac # Checks for header files. diff --git a/tools/libxl/Makefile b/tools/libxl/Makefile index 1b16598..2afb146 100644 --- a/tools/libxl/Makefile +++ b/tools/libxl/Makefile @@ -59,7 +59,7 @@ endif LIBXL_OBJS-y += libxl_remus_device.o libxl_remus_disk_drbd.o LIBXL_OBJS-$(CONFIG_X86) += libxl_cpuid.o libxl_x86.o libxl_psr.o -LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o +LIBXL_OBJS-$(CONFIG_ARM) += libxl_nocpuid.o libxl_arm.o libxl_libfdt_compat.o ifeq ($(CONFIG_NetBSD),y) LIBXL_OBJS-y += libxl_netbsd.o diff --git a/tools/libxl/libxl_internal.h b/tools/libxl/libxl_internal.h index 8eb38aa..857abd4 100644 --- a/tools/libxl/libxl_internal.h +++ b/tools/libxl/libxl_internal.h @@ -3692,6 +3692,7 @@ static inline void libxl__update_config_vtpm(libxl__gc *gc, */ void libxl__bitmap_copy_best_effort(libxl__gc *gc, libxl_bitmap *dptr, const libxl_bitmap *sptr); + #endif /* diff --git a/tools/libxl/libxl_libfdt_compat.c b/tools/libxl/libxl_libfdt_compat.c new file mode 100644 index 0000000..a1823b2 --- /dev/null +++ b/tools/libxl/libxl_libfdt_compat.c @@ -0,0 +1,94 @@ +/* + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This file is part of libxl, and was originally taken from libfdt. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; version 2.1 only. with the special + * exception on linking described in file LICENSE. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * Additionally, this particular file is dual licensed. That is, + * alternatively, at your option: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Note that this applies only to this file, and other files with a + * similar notice. Also, note that when the same code is distributed + * along with the rest of libxl, you must comply with the terms of the + * LGPLv2.1 for the whole of libxl including this file. + * + * The intent is to permit, in particular, upstream libfdt to + * incorporate improvements to this file within upstream libfdt. At + * the time of writing, upstream libfdt is dual licensed: 2-clause BSD + * (as above) and GPLv2-or-later. The 2-clause BSD licence is + * compatible with both GPLv2-or-later and LGPLv2.1-only; this permits + * copying in both directions, and the optional licence upgrade to a + * copyleft licence by libdft upstream or the Xen Project, + * respectively. + */ + +#include <libfdt.h> + +#include "libxl_libfdt_compat.h" + +#ifndef HAVE_FDT_FIRST_SUBNODE +int fdt_first_subnode(const void *fdt, int offset) +{ + int depth = 0; + + offset = fdt_next_node(fdt, offset, &depth); + if (offset < 0 || depth != 1) + return -FDT_ERR_NOTFOUND; + + return offset; +} +#endif + +#ifndef HAVE_FDT_NEXT_SUBNODE +int fdt_next_subnode(const void *fdt, int offset) +{ + int depth = 1; + + /* + * With respect to the parent, the depth of the next subnode will be + * the same as the last. + */ + do { + offset = fdt_next_node(fdt, offset, &depth); + if (offset < 0 || depth < 1) + return -FDT_ERR_NOTFOUND; + } while (depth > 1); + + return offset; +} +#endif diff --git a/tools/libxl/libxl_libfdt_compat.h b/tools/libxl/libxl_libfdt_compat.h new file mode 100644 index 0000000..cf414f5 --- /dev/null +++ b/tools/libxl/libxl_libfdt_compat.h @@ -0,0 +1,80 @@ +/* + * Copyright (C) 2006 David Gibson, IBM Corporation. + * + * This file is part of libxl, and was originally taken from libfdt. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU Lesser General Public License as published + * by the Free Software Foundation; version 2.1 only. with the special + * exception on linking described in file LICENSE. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * Additionally, this particular file is dual licensed. That is, + * alternatively, at your option: + * + * Redistribution and use in source and binary forms, with or + * without modification, are permitted provided that the following + * conditions are met: + * + * 1. Redistributions of source code must retain the above + * copyright notice, this list of conditions and the following + * disclaimer. + * 2. Redistributions in binary form must reproduce the above + * copyright notice, this list of conditions and the following + * disclaimer in the documentation and/or other materials + * provided with the distribution. + * + * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND + * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, + * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE + * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR + * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, + * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; + * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) + * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN + * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR + * OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, + * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * Note that this applies only to this file, and other files with a + * similar notice. Also, note that when the same code is distributed + * along with the rest of libxl, you must comply with the terms of the + * LGPLv2.1 for the whole of libxl including this file. + * + * The intent is to permit, in particular, upstream libfdt to + * incorporate improvements to this file within upstream libfdt. At + * the time of writing, upstream libfdt is dual licensed: 2-clause BSD + * (as above) and GPLv2-or-later. The 2-clause BSD licence is + * compatible with both GPLv2-or-later and LGPLv2.1-only; this permits + * copying in both directions, and the optional licence upgrade to a + * copyleft licence by libdft upstream or the Xen Project, + * respectively. + */ + +#ifndef LIBXL_LIBFDT_COMPAT_H +#define LIBXL_LIBFDT_COMPAT_H + +#if !HAVE_DECL_FDT_FIRST_SUBNODE +int fdt_first_subnode(const void *fdt, int offset); +#endif + +#if !HAVE_DECL_FDT_NEXT_SUBNODE +int fdt_next_subnode(const void *fdt, int offset); +#endif + +#endif + +/* + * Local variables: + * mode: C + * c-basic-offset: 4 + * indent-tabs-mode: nil + * End: + */ + -- 2.1.4 _______________________________________________ Xen-devel mailing list Xen-devel@xxxxxxxxxxxxx http://lists.xen.org/xen-devel
|
Lists.xenproject.org is hosted with RackSpace, monitoring our |