[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Xen-devel] [PATCH v2 07/41] arm/acpi : Introduce ARM Boot Architecture Flags in FADT

On 18 May 2015 at 19:59, Julien Grall <julien.grall@xxxxxxxxxx> wrote:
Hi Parth,

On 17/05/15 21:03, Parth Dixit wrote:
> The Power State Coordination Interface (PSCI) defines an API that
> can be used to coordinate power control amongst the various supervisory
> systems concurrently running on a device. ACPI support for this
> technology would require the addition of two flags: PSCI_COMPLIANT and
> PSCI_USE_HVC. When set, the former signals to the OS that the hardware
> is PSCI compliant. The latter selects the appropriate conduit for PSCI
> calls by toggling between Hypervisor Calls (HVC) and Secure Monitor
> Calls (SMC).
> An ARM Boot Architecture Flags structure to support new ARM hardware
> was introduced in FADT in ACPI 5.1, add the code accordingly to
> implement that in ACPICA core.
> Since ACPI 5.1 doesn't support self defined PSCI function IDs,
> which means that only PSCI 0.2+ is supported in ACPI.
> Signed-off-by: Hanjun Guo <hanjun.guo@xxxxxxxxxx>
> Signed-off-by: Naresh Bhat <naresh.bhat@xxxxxxxxxx>
> ---
>Â xen/include/acpi/actbl.h | 10 ++++++++--
>Â 1 file changed, 8 insertions(+), 2 deletions(-)
> diff --git a/xen/include/acpi/actbl.h b/xen/include/acpi/actbl.h
> index 856945d..96fd1d8 100644
> --- a/xen/include/acpi/actbl.h
> +++ b/xen/include/acpi/actbl.h
> @@ -244,7 +244,8 @@ struct acpi_table_fadt {
>Â Â Â Âu32 flags;Â Â Â Â Â Â Â /* Miscellaneous flag bits (see below for individual flags) */
>Â Â Â Âstruct acpi_generic_address reset_register;Â Â Â/* 64-bit address of the Reset register */
>Â Â Â Âu8 reset_value;Â Â Â Â Â/* Value to write to the reset_register port to reset the system */
> -Â Â Âu8 reserved4[3];Â Â Â Â /* Reserved, must be zero */
> +Â Â u16 arm_boot_flags;Â Â Â/* ARM Boot Architecture Flags (see below for individual flags) */
> +Â Â u8 minor_revision;Â Â Â Â/* Minor version of this FADT structure */

Wrong indentation. The file is using hard tab.

>Â Â Â Âu64 Xfacs;Â Â Â Â Â Â Â /* 64-bit physical address of FACS */
>Â Â Â Âu64 Xdsdt;Â Â Â Â Â Â Â /* 64-bit physical address of DSDT */
>Â Â Â Âstruct acpi_generic_address xpm1a_event_block;Â /* 64-bit Extended Power Mgt 1a Event Reg Blk address */
> @@ -270,6 +271,11 @@ struct acpi_table_fadt {
> +/* Masks for FADT ARM Boot Architecture Flags (arm_boot_flags) */
> +
> +#define ACPI_FADT_PSCI_COMPLIANTÂ Â (1)Â Â Â Â /* 00: PSCI 0.2+ is implemented */
> +#define ACPI_FADT_PSCI_USE_HVCÂ Â Â (1<<1)Â Â Â/* 01: HVC must be used instead of SMC as the PSCI conduit */
> +
>Â /* Masks for FADT flags */
>Â #define ACPI_FADT_WBINVDÂ Â Â Â Â Â (1)Â Â Â /* 00: [V1] The wbinvd instruction works properly */
> @@ -345,7 +351,7 @@ enum acpi_prefered_pm_profiles {
>Â Â*Â Â ÂFADT V5Â size: 0x10C
>Â Â*/
>Â #define ACPI_FADT_V1_SIZEÂ Â Â Â(u32) (ACPI_FADT_OFFSET (flags) + 4)
> -#define ACPI_FADT_V2_SIZEÂ Â Â Â(u32) (ACPI_FADT_OFFSET (reserved4[0]) + 3)
> +#define ACPI_FADT_V2_SIZEÂ Â Â Â(u32) (ACPI_FADT_OFFSET (arm_boot_flags) + 3)

Linux is using ACPI_FADT_OFFSET(minor_revision) + 1. Can you use the
same here?

Also, I've notice that the patch (see 9eb1105) is slightly different.
Mostly documenting the ACPI version for the fields.

Can you update the patch based on Linux code to use the latest version
(i.e the version upstreamed)?

sure, i'll update it to be in sync with linux.

Julien Grall

Xen-devel mailing list



Lists.xenproject.org is hosted with RackSpace, monitoring our
servers 24x7x365 and backed by RackSpace's Fanatical Support®.